aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-05-01IB/ipath: simplify RC send postingBryan O'Sullivan
Remove some unnecessarily complicated tests. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01IB/ipath: prevent hardware from being accessed during resetBryan O'Sullivan
The reset code now turns off the PRESENT flag during a reset, so that other code won't attempt to access a device that's in mid-reset. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01IB/ipath: fix verbs registrationBryan O'Sullivan
Remember when the verbs layer unregisters from the lower-level code. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01IB/ipath: change handling of PIO buffersBryan O'Sullivan
Different ipath hardware types have different numbers of buffers available, so we decide on the counts ourselves unless we are specifically overridden with a module parameter. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01IB/ipath: iterate over correct number of ports during resetBryan O'Sullivan
Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01IB/ipath: set up 32-bit DMA mask if 64-bit setup failsBryan O'Sullivan
Some systems do not set up 64-bit maps on systems with 2GB or less of memory installed, so we have to fall back to trying a 32-bit setup. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01IB/ipath: fix race with exposing reset fileBryan O'Sullivan
We were accidentally exposing the "reset" sysfs file more than once per device. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01IB/mthca: Fix offset in query_gid methodRoland Dreier
GuidInfo records have 8 byte GUIDs in them, so an index should be multiplied by 8 to get an offset. mthca_query_gid() was incorrectly multiplying by 16. Noticed by Leonid Keller <leonid@mellanox.co.il>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-01Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TG3]: Update version and reldate [TG3]: Fix bug in nvram write [TG3]: Add reset_phy parameter to chip reset functions [TG3]: Reset chip when changing MAC address [TG3]: Add phy workaround [TG3]: Call netif_carrier_off() during phy reset [IPV6]: Fix race in route selection. [XFRM]: fix incorrect xfrm_policy_afinfo_lock use [XFRM]: fix incorrect xfrm_state_afinfo_lock use [TCP]: Fix unlikely usage in tcp_transmit_skb() [XFRM]: fix softirq-unsafe xfrm typemap->lock use [IPSEC]: Fix IP ID selection [NET]: use hlist_unhashed() [IPV4]: inet_init() -> fs_initcall [NETLINK]: cleanup unused macro in net/netlink/af_netlink.c [PKT_SCHED] netem: fix loss [X25]: fix for spinlock recurse and spinlock lockup with timer handler
2006-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: make EVIOCGSND return meaningful data Input: ressurect EVIOCGREP and EVIOCSREP Input: psmouse - fix new device detection logic Input: move input_device_id to mod_devicetable.h Input: allow using several chords for braille Input: allow passing NULL to input_free_device() Input: spitzkbd - fix the reversed Address and Calender keys Input: ads7846 - improve filtering for thumb press accuracy Input: ads7846 - report 0 pressure value along with pen up event Input: ads7846 - handle IRQs that were latched during disabled IRQs Input: ads7846 - miscellaneous fixes Input: ads7846 - use msleep() instead of udelay() in suspend Input: ads7846 - debouncing and rudimentary sample filtering Input: ads7846 - power down ADC a bit later Input: ads7846 - add pen_down sysfs attribute Input: wistron - add support for Fujitsu N3510 Input: wistron - add signature for Amilo M7400
2006-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsa: (22 commits) [ALSA] via82xx - Use DXS_SRC as default for VIA8235/8237/8251 chips [ALSA] hda-codec - Add model entry for ASUS Z62F [ALSA] PCMCIA sound devices shouldn't depend on ISA [ALSA] hda-codec - Fix capture from line-in on VAIO SZ/FE laptops [ALSA] Fix Oops at rmmod with CONFIG_SND_VERBOSE_PROCFS=n [ALSA] PCM core - introduce CONFIG_SND_PCM_XRUN_DEBUG [ALSA] adding __devinitdata to pci_device_id [ALSA] add __devinitdata to all pci_device_id [ALSA] hda-codec - Add codec id for AD1988B codec chip [ALSA] hda-codec - Add model entry for ASUS M9 laptop [ALSA] pcxhr - Fix a compiler warning on 64bit architectures [ALSA] via82xx: tweak VT8251 workaround [ALSA] intel8x0 - Disable ALI5455 SPDIF-input [ALSA] via82xx: add support for VIA VT8251 (AC'97) [ALSA] Fix typos and add information about Jack support to Audiophile-Usb.txt [ALSA] Fix double free in error path of miro driver [ALSA] hda-codec - Add entry for Epox EP-5LDA+ GLi [ALSA] sound/pci/: remove duplicate #include's [ALSA] hda-codec - Use model 'hp' for all HP laptops with AD1981HD [ALSA] continue on IS_ERR from platform device registration ...
2006-04-29[TG3]: Update version and reldateMichael Chan
Update version to 3.57. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Fix bug in nvram writeMichael Chan
Fix bug in nvram write function. If the starting nvram address offset happens to be the last dword of the page, the NVRAM_CMD_LAST bit will not get set in the existing code. This patch fixes the bug by changing the "else if" to "if" so that the last dword condition always gets checked. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Add reset_phy parameter to chip reset functionsGary Zambrano
Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With the full chip reset during MAC address change, the automatic PHY reset during chip reset will cause a link down and bonding will not work properly as a result. With this reset_phy parameter, we can do a chip reset without link down when changing MAC address or MTU. Signed-off-by: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Reset chip when changing MAC addressMichael Chan
Do the full chip reset when changing MAC address if ASF is enabled. ASF sometimes uses a different MAC address than the driver. Without the reset, the ASF MAC address may be overwritten when the driver's MAC address is changed. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Add phy workaroundMichael Chan
Add some PHY workaround code to reduce jitter on some PHYs. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29[TG3]: Call netif_carrier_off() during phy resetMichael Chan
Add netif_carrier_off() call during tg3_phy_reset(). This is needed to properly track the netif_carrier state in cases where we do a PHY reset with interrupts disabled. The SerDes code will not run properly if the netif_carrier state is wrong. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [PATCH] powerpc: update cell_defconfig [PATCH] spufs: Disable local interrupts for SPE hash_page calls. [PATCH] powerpc: Add cputable entry for POWER6 [PATCH] ppc32 CPM_UART: Fixed odd address translations [PATCH] ppc32: Update board-specific code of the CPM UART users [PATCH] ppc32 CPM_UART: Convert to use platform devices [PATCH] ppc32: odd fixes and improvements in ppc_sys [PATCH] powerpc: Wire up *at syscalls [PATCH] ppc32: add 440GX erratum 440_43 workaround [PATCH] powerpc: Use check_legacy_ioport() on ppc32 too. [PATCH] powerpc64: Fix loading of modules without a .toc section [PATCH] sound/ppc: snd_pmac_toonie_init should be __init powerpc/pseries: Tell firmware our capabilities on new machines [PATCH] powerpc: Fix pagetable bloat for hugepages
2006-04-29[PATCH] au1200fb: Remove accidentally duplicated content of au1200fb.cRalf Baechle
Content of file au1200fb.c was duplicated. Remove. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-29[SCSI] advansys driver: limp along on x86Linus Torvalds
Let people enable the advansys driver on x86-32, even though it's broken on other architectures due to missing DMA mapping infrastructure. It's used by Jeffrey Phillips Freeman <jeffreyfreeman@syncleus.com> and possibly others. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-29Input: make EVIOCGSND return meaningful dataDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-29Input: ressurect EVIOCGREP and EVIOCSREPDmitry Torokhov
While writing to an event device allows to set repeat rate for an individual input device there is no way to retrieve current settings so we need to ressurect EVIOCGREP. Also ressurect EVIOCSREP so we have a symmetrical interface. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-29Input: psmouse - fix new device detection logicDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-04-29Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Dmitry Torokhov
2006-04-28[PATCH] asiliantfb: Add help text in KconfigAntonino A. Daplas
Add help text in Kconfig Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] s390: dasd device identifiersHorst Hummel
Generate new sysfs-attribute 'uid' that contains an device specific unique identifier. This can be used to identity multiple ALIASES of the same physical device (PAV). In addition the sysfs-attributes 'vendor' (containing the manufacturer of the device) and 'alias' (identify alias or base device) is added. This is first part of PAV support in LPAR (also valid on zVM). Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] s390: instruction processing damage handlingHeiko Carstens
In case of an instruction processing damage (IPD) machine check in kernel mode the resulting action is always to stop the kernel. This is not necessarily the best solution since a retry of the failing instruction might succeed. Add logic to retry the instruction if no more than 30 instruction processing damage checks occured in the last 5 minutes. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] s390: tape 3590 changesStefan Bader
Added some changes that where proposed by Andrew Morton. Added 3592 device type. Signed-off-by: Stefan Bader <shbader@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] s390: fix slab debuggingChristian Borntraeger
With CONFIG_SLAB_DEBUG=y networking over qeth doesn't work. The problem is that the qib structure embedded in the qeth_irq structure needs an alignment of 256 but kmalloc only guarantees an alignment of 8. When using SLAB debugging the alignment of qeth_irq is not sufficient for the embedded qib structure which causes all users of qdio (qeth and zfcp) to stop working. Allocate qeth_irq structure with __get_free_page. That wastes a small amount of memory (~2500 bytes) per online adapter. Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] s390: dasd ioctl never returnsHorst Hummel
The dasd state machine is not designed to enable an unformatted device, since 'unformatted' is a final state. The BIODASDENABLE ioctl calls dasd_enable_device() which never returns if the device is in this special state. Return -EPERM in dasd_increase_state for unformatted devices to make dasd_enable_device terminate. Note: To get such an unformatted device online it has to be re-analyzed. This means that the device needs to be disabled prior to re-enablement. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] s390: qdio memory allocationsAndreas Herrmann
Avoid memory allocation with GFP_KERNEL in qdio_establish/qdio_shutdown. Use memory pool instead. (Otherwise this can lead to an I/O stall where qdio waits for a free page and zfcp waits for end of error recovery in low memory situations.) Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] s390: enable interrupts on error pathStefan Bader
Interrupts can stay disabled if an error occurred in _chp_add(). Use spin_unlock_irq on the error paths to reenable interrupts. Signed-off-by: Stefan Bader <shbader@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] s390: fix I/O termination race in cioPeter Oberparleiter
Fix a race condition in the I/O termination logic. The race can cause I/O to a dasd device to fail with no retry left after turning one channel path to the device off and on multiple times. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] fix array overrun in drivers/char/mwave/mwavedd.cEric Sesterhenn
this fixes coverity id #489. Since the last element in the array is always ARRAY_SIZE-1 we have to check for ipcnum >= ARRAY_SIZE() Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] tipar oops fixDaniel Drake
If compiled into the kernel, parport_register_driver() is called before the parport driver has been initalised. This means that it is expected that tp_count is 0 after the parport_register_driver() call() - tipar's attach function will not be called until later during bootup. Signed-off-by: Daniel Drake <dsd@gentoo.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] request_irq(): remove warnings from irq probingAndrew Morton
- Add new SA_PROBEIRQ which suppresses the new sharing-mismatch warning. Some drivers like to use request_irq() to find an unused interrupt slot. - Use it in i82365.c - Kill unused SA_PROBE. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-28[PATCH] ppc32 CPM_UART: Fixed odd address translationsVitaly Bordug
Current address translation methods can produce wrong results, because virt_to_bus and vice versa may not produce correct offsets on dma-allocated memory. The right way is, while tracking both phys and virt address of the window that has been allocated for boffer descriptors, and use those numbers to compute the offset and make translation properly. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28[PATCH] ppc32 CPM_UART: Convert to use platform devicesVitaly Bordug
This is intended to make the driver code more generic and flexible, to get rid of board-specific layouts within driver, and generic rehaul, yet keeping compatibility with the existing stuff utilizing it, being compatible with legacy behavior (but with complaints that legacy mode used). Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-28[PATCH] powerpc: Use check_legacy_ioport() on ppc32 too.David Woodhouse
Some people report that we die on some Macs when we are expecting to catch machine checks after poking at some random I/O address. I'd seen it happen on my dual G4 with serial ports until we fixed those to use OF, but now other users are reporting it with i8042. This expands the use of check_legacy_ioport() to avoid that situation even on 32-bit kernels. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-27Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] update sn2 defconfig [IA64] Add mca recovery failure messages [IA64-SGI] fix SGI Altix tioce_reserve_m32() bug [IA64] enable dumps to capture second page of kernel stack [IA64-SGI] - Reduce overhead of reading sn_topology [IA64-SGI] - Fix discover of nearest cpu node to IO node [IA64] IOC4 config option ordering [IA64] Setup an IA64 specific reclaim distance [IA64] eliminate compile time warnings [IA64] eliminate compile time warnings [IA64-SGI] SN SAL call to inject memory errors [IA64] - Fix MAX_PXM_DOMAINS for systems with > 256 nodes [IA64] Remove unused variable in sn_sal.h [IA64] Remove redundant NULL checks before kfree [IA64] wire up compat_sys_adjtimex()
2006-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] PCI quirk: VIA IRQ fixup should only run for VIA southbridges [PATCH] PCI: fix potential resource leak in drivers/pci/msi.c [PATCH] PCI: Documentation: no more device ids [PATCH] PCI: fix via irq SATA patch
2006-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: [PATCH] USB: ftdi_sio: add support for ASK RDR 400 series card reader [PATCH] USB: ftdi_sio: Adds support for iPlus device. [PATCH] USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USB [PATCH] USB: Use new PCI_CLASS_SERIAL_USB_* defines [PATCH] USB: net2280: set driver data before it is used [PATCH] USB: net2280: check for shared IRQs [PATCH] USB: net2280: send 0-length packets for ep0 [PATCH] USB: net2280: Handle STALLs for 0-length control-IN requests [PATCH] USB: storage: atmel unusual dev update [PATCH] USB: Storage: unusual devs update [PATCH] USB: add new iTegno usb CDMA 1x card support for pl2303 [PATCH] USB: Resource leak fix for whiteheat driver
2006-04-27[PATCH] Frame buffer: remove cmap sysfs interfaceJon Smirl
Remove it as it does not work properly due to sysfs core changes. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] PCI quirk: VIA IRQ fixup should only run for VIA southbridgesChris Wedgwood
Alan Cox pointed out that the VIA 'IRQ fixup' was erroneously running on my system which has no VIA southbridge (but I do have a VIA IEEE 1394 device). This should address that. I also changed "Via IRQ" to "VIA IRQ" (initially I read Via as a capitalized via (by way/means of). Signed-off-by: Chris Wedgwood <cw@f00f.org> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] PCI: fix potential resource leak in drivers/pci/msi.cJesper Juhl
The coverity checker spotted (as entry #599) that we might leak `entry' in drivers/pci/msi.c::msix_capability_init() This patch should take care of that. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[ALSA] add __devinitdata to all pci_device_idHenrik Kretzschmar
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-04-27[PATCH] USB: ftdi_sio: add support for ASK RDR 400 series card readerIan Abbott
This patch adds support for an ASK RDR 400 series contactless card reader <http://www.ask.fr/uk/products_and_services/terminals.html> to the ftdi_sio driver's device ID table. The product ID was supplied by Adriano Couto on the ftdi-usb-sio-devel list. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio: Adds support for iPlus device.Luiz Fernando N. Capitulino
Adds support in ftdi_sio usbserial driver for USB modems sold by Plus GSM Company in Poland. Signed-off-by: Luiz Fernando Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: ftdi_sio vendor code for RR-CirKits LocoBuffer USBNathan Bronson
This patch adds recognition of the RR-CirKits LocoBuffer USB to the existing FTDI driver. http://www.rr-cirkits.com Signed-off-by: Nathan Bronson <ngb@sns-usa.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-04-27[PATCH] USB: Use new PCI_CLASS_SERIAL_USB_* definesJean Delvare
We could use the recently added PCI_CLASS_SERIAL_USB_UHCI, PCI_CLASS_SERIAL_USB_OHCI and PCI_CLASS_SERIAL_USB_EHCI defines in more places, for slightly shorter and clearer code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>