aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-28b43/nphy.c: include headers to avoid build breakage on some platformsJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28drivers/net/wireless/rt2x00/rt2x00usb.c: fix uninitialized var warningAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28drivers/net/wireless/iwlwifi/iwl-3945.c: fix printk warningAndrew Morton
drivers/net/wireless/iwlwifi/iwl-3945.c: In function 'iwl3945_add_radiotap': drivers/net/wireless/iwlwifi/iwl-3945.c:269: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43legacy: fix use-after-free rfkill bugStefano Brivio
Fix rfkill code which caused a use-after-free bug. Thanks to David Woodhouse for spotting this out. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: pepper main with debug statementHolger Schurig
libertas: re-pepper debug statementThe recent fluff of updates didn't put proper lbs_deb_enter/leave calls into the source code. Add them where appropriate. Also contains some whitespace changes. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: don't blindly try meshHolger Schurig
The CF card only has a very old firmware (5.0.16p0). This firmware doesn't know anything about mesh config. However, current code blindly calls mesh_config when the card is inserted. So check the firmware version before issuing this command. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: always show firmware releaseHolger Schurig
Always shows the firmware release. Also converts the firmware release into something that is easily comparable. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas: move cardspecific data to driverHolger Schurig
boot2_version is purely USB specific, so move it to struct if_usb_card. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28libertas cs/sdio: fix 'NOHZ: local_softirq_pending 08' messageHolger Schurig
netif_rx should be called only from interrupt context. if_cs and if_sdio receive packets from other contexts, and thus should call netif_rx_ni. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add lots of N-PHY lookup tablesMichael Buesch
This adds lots of N-PHY related lookup tables. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: style fixes to usage of << and >> operatorsReinette Chatre
The << and >> operators need space on each side. Cc: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: remove reference to non-existent documentationReinette Chatre
The external iwlwifi driver comes with a README file that is referenced by the Kconfig. This README is not present in the driver included in the kernel. Remove references to this documentation. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: Update iwlwifi version stamp to 1.2.23Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: 3954 renames iwl3945_rate_scale_priv to iwl3945_rs_staTomas Winkler
This patch renames iwl3945_rate_scale_priv to iwl3945_rs_sta as it better represents the purpose of this variable. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28iwlwifi: 4965 unify rate scale variable names for station dataTomas Winkler
1, This patch renames iwl4965_rate_scale_priv to iwl4965_lq_sta. This type represents a station's link quality. 2. The names of the variables of this type were rs_priv, lq_data, lq, crl across the file. All are now unified under the name lq_sta. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: move uCode helper functions to iwl-helpers.hTomas Winkler
This patch adds iwl_free_fw_desc ucode helper function. It also moves ucode helper functions to iwl-helpers.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: fix problem when rf_killswitch change during suspend/resumeZhu Yi
After we delay device initialization until interface up, there are more conditions for the hardware rf_kill switch states during suspend and resume. For example, before suspend we can have interface up or down, rf_kill enable or disable; before resume we can have rf_kill enable or disable. So there are totally 2^3 = 8 conditions to handle. This patch addressed this problem and makes sure every condition works correctly. This patch also merges the device suspend and resume handlers with the mac_start and mac_stop code since they are basically doing the same thing. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28iwlwifi: delay firmware loading from pci_probe to network interface openZhu Yi
This patch moves the firmware loading (read firmware from disk and load it into the device SRAM) from pci_probe time to the first network interface open time. There are two reasons for doing this: 1. To support kernel buildin iwlwifi drivers. Because kernel initializes network devices subsystem before hard disk and SATA subsystem, it is impossible to get the firmware image from hard disk in the PCI probe handler. Thus delaying the firmware loading into the network interface open time is the way to go. Note, we only read the firmware image from hard disk the first time the interface is open. After this is succeeded, we cache the firmware image into the host memory. This is a performance gain when user open and close the interface multiple times and is necessary for device suspend and resume. 2. For better power saving. When the iwlwifi modules are loaded (or buildin the kernel) but the wireless network interface is not being used, it is a good practice the wireless device consumes as less power as possible. Unloading the firmware from the wireless device and unregister the driver's interrupt handler in the network interface close handler provides users a way to achieve this. User space network configuration tools (i.e NetworkManager) can also contribute here when it detects a wired cable is connected and close the wireless interface automatically. This patch also includes the pci_save/restore_state() fixed by Ian Schram upon the first version. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: document scan commandBen Cahill
Document scan command. Signed-off-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: remove iwl4965_tx_cmdTomas Winkler
This patch removes iwl4965_tx_cmd function and splits its content to iwl4965_hw_build_tx_cmd_rate, iwl4965_build_tx_cmd_basic, and iwl4965_tl_get_stats function. The latest one will be deprecated when traffic load will move to rate scale module. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: move iwl4965_get_dma_hi_address function to iwl-helpers.hTomas Winkler
This patch moves iwl4965_get_dma_hi_address function to iwl-headers.h as iwl_get_dma_hi_address. This function will be used in more chipsets than only 4965. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwl4965: Remove redundant code in iwl4965_tx_cmdTomas Winkler
This function removes redundant code in iwl4965_tx_cmd function, leftovers of previous design. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add NPHY channel switch codeMichael Buesch
This adds code and table data for channel switching on NPHYs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add NPHY radio init codeMichael Buesch
This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: Add boardflags_hi field to the sprom data structureMichael Buesch
Add boardflags-high. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add Broadcom 2055 radio register definitionsMichael Buesch
Add the register definitions for the Broadcom 2055 N-radio. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28WAVELAN - compile-time check for struct sizesHelge Deller
Convert optional struct size checks to non-optional compile-time checks. Furthermore BUILD_BUG_ON() which will be optimized away by the compiler. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add support for new firmwareMichael Buesch
This patch adds support for new firmware. Old firmware is still supported until July 2008. To get new firmware, go to ftp://ftp.linksys.com/opensourcecode/wrt150nv11/1.51.3/ and download the tarball. We don't have a smaller tarball, yet. That will be fixed later. You can extract firmware out of the "wl_ap.o" file contained in this tarball using latest fwcutter. You must pass the option --unsupported to fwcutter. Fwcutter-010 with official support for a new firmware image will be released soon. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28b43: Fix radio ID register readingMichael Buesch
This fixes reading of the high 16 bits of the radio ID on new devices. 2055 radios want lo16 to be read first. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Fix queue_idx initializationIvo van Doorn
For TX rings the queue_idx should start at IEEE80211_TX_QUEUE_DATA0 and for each followup ring this index needs to be increased. For the RX ring the queue_idx should be set to 0. We don't need to initialize the tx_params. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28rt2x00: Data and desc pointer initializationIvo van Doorn
rt2500usb and rt73usb data and desc pointer initialization was incorrect because it was using uninitialized variables to determine the length. In addition rt2500usb used skb_pull and removed the ieee80211 from each received frame instead of using skb_trim to remove the device descriptor from the frame. Finally this also fixes the descriptor override when 4 byte aligning occured. We still need a completely valid descriptor when using the TX/RX dumping capabilities in debugfs. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add N-PHY related initvals firmware filenames.Michael Buesch
This adds the initval filenames for the N-PHY firmware. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix tim search buffer overrunMichael Buesch
Use the length of the variable section of the beacon instead of the whole beacon length for bounds checking. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Put multicast frames on the mcast queueMichael Buesch
This queues frames flagged as "send after DTIM" by mac80211 on the special multicast queue. The firmware will take care to send the packet after the DTIM. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix template upload locking.Michael Buesch
This fixes the template upload locking. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix upload of beacon packets to the hardwareMichael Buesch
This fixes uploading of the beacon data and writing of the TIM and DTIM offsets. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: add unified BSS configurationJohannes Berg
This patch (based on Ron Rindjunsky's) creates a framework for a unified way to pass BSS configuration to drivers that require the information, e.g. for implementing power save mode. This patch introduces new ieee80211_bss_conf structure that is passed to the driver via the new bss_info_changed() callback when the BSS configuration changes. This new BSS configuration infrastructure adds the following new features: * drivers are notified of their association AID * drivers are notified of association status and replaces the erp_ie_changed() callback. The patch also does the relevant driver updates for the latter change. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: Fix rate reporting regressionMichael Wu
Mattias Nissler's "clean up rate selection" patch incorrectly changes the behavior of txrate setting in sta_info. This patch backs out parts of the rate selection consolidation in order to fix this issue for now. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: A-MPDU Rx flow enabledRon Rindjunsky
This patch enables the A-MPDU Rx flow. it contains several adjustments to new mac80211 A-MPDU Rx flow. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ath5k: Fix frame duration oopsLuis R. Rodriguez
This patch fixes an oops which was introduced as a regression by commit fd640775bd16e1df50c867cc547af0, on the patch titled, "mac80211: dont use interface indices in drivers". ieee80211_generic_frame_duration() now relies on sdata->flags which itself gets set upon bringing the interface up. We check for the virtual interface now before setting the rate duration registers. After the mode changes are introduced onto mac80211 we should revisit these changes. This patch was tested on the following cards: 1) BG card: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) RF2112A 2GHz radio found (0x46) 2) ABG card: Atheros AR5213A chip found (MAC: 0x59,PHY: 0x43) RF5112A multiband radio found (0x36) Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28mac80211: dont use interface indices in driversJohannes Berg
This patch gets rid of the if_id stuff where possible in favour of a new per-virtual-interface structure "struct ieee80211_vif". This structure is located at the end of the per-interface structure and contains a variable length driver-use data area. This has two advantages: * removes the need to look up interfaces by if_id, this is better for working with network namespaces and performance * allows drivers to store and retrieve per-interface data without having to allocate own lists/hash tables Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28Add rtl8180 wireless driverMichael Wu
This patch adds a mac80211 based wireless driver for the rtl8180 and rtl8185 PCI wireless cards. Also included are some rtl8187 changes required due to the relationship between that driver and this one. Michael Wu is primarily responsible for the initial driver and rtl8185 support. Andreas Merello provided the additional rtl8180 support. Thanks to Jukka Ruohonen for the donating a rtl8185 card! It was very helpful for the rtl8225z2 code. The Signed-off-by information below is collected from the individual patches submitted to wireless-2.6 before merging this driver upstream. Signed-off-by: Andrea Merello <andreamrl@tiscali.it> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28[PATCH] Net: add ath5k wireless driverJiri Slaby
add ath5k wireless driver Portions of this driver are covered by one or both of the ISC and 3-clause BSD licenses. Specific license information is cited at the top of each file. Acked-by and Signed-off-by information is collected from individual patches as collected in the wireless-2.6 tree prior to upstream submission. Acked-by: Matthew W. S. Bell <mentor@madwifi.org> Acked-by: Michael Taylor <mike.taylor@apprion.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bradley M. Kuhn <bkuhn@softwarefreedom.org> Signed-off-by: Bruno Randolf <bruno@thinktube.com> Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Karen Sandler <karen@softwarefreedom.org> Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: Matt Norwood <norwood@softwarefreedom.org> Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Richard Fontana <fontana@softwarefreedom.org> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Ulrich Meis <meis@nets.rwth-aachen.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: finish removal of pio supportJohn W. Linville
As suggested in "b43: Remove PIO support"... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28hostap_cs: don't match revisions in presense of the MAC chip namePavel Roskin
If the third PCMCIA ID string specifies the MAC chip, the fourth ID string doesn't need to be matched. Even if it's different, it will be compatible with the driver. This ensures that other different revisions of the card will be supported. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Remove the PHY spinlockMichael Buesch
This fixes a sparse warning about weird locking. The spinlock is not needed, so simply remove it. This also adds some sanity checks to the PHY and radio locking to protect against recursive locking. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Fix PHY register routingMichael Buesch
This fixes the PHY routing bit handling. This is needed for N-PHY. No functional change to A-PHY and G-PHY code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43: Add N-PHY register definitionsMichael Buesch
This patch adds all register definitions for the N-PHY. This adds two new files: nphy.h and nphy.c No functional changes to existing code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28zd1211rw: fix alignment for QOS and WDS framesMichael Buesch
This patch fixes RX packet alignment issues in the zd1211rw driver. This is based on a patch by Johannes Berg. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28iwlwifi: fix compilation warning in 'iwl-4965.c'Miguel Botón
This patch fixes a compilation warning in 'iwl-4965.c'. "warning: format ‘%d’ expects type ‘int’, but argument 3 has type ‘long unsigned int’" Signed-off-by: Miguel Botón <mboton@gmail.com Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 23:08:20 +0000