aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-12-11tc35815: Enable StripCRC featureAtsushi Nemoto
The chip can strip CRC automatically on receiving. Enable it. Also fix potential RX_BUF_SIZE calculation bug which was obscured by alignment. And use proper symbols (NET_IP_ALIGN, ETH_FCS_LEN, etc.) instead of magic numbers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-11smsc9420: SMSC LAN9420 10/100 PCI ethernet adapterSteve Glendinning
This patch adds a driver for the LAN9240 PCI ethernet adapter. Changes since initial submission: - debug msg_level has been changed to use standard definitions - convert to use net_device_ops Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-11igb: fixup AER with proper error handlingJeff Kirsher
Based on Peter Waskiewicz patch for ixgbe. Add error handling based on Hemminger's recommendation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10smsc911x: add dynamic bus configurationSteve Glendinning
Convert the driver to select 16-bit or 32-bit bus access at runtime, at a small performance cost. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10ixgbe: Implement PCIe AER supportPeter P Waskiewicz Jr
This patch implements the PCIe Advanced Error Reporting callbacks in ixgbe. The 82598 hardware supports AER, so we enable it. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10igb: Correctly determine pci-e function number in virtual environmentAlexander Duyck
When running in a virtual environment the ports of an 82575/6 can appear to be single function devices which is not correct. To resolve this we rely on the function number stored in the status register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10igb: update handling of RCTL for smaller buffer sizesAlexander Duyck
As we begin to move into virtualization the use of a global value for buffer sizes becomes undesirable. This change makes it so only 256 and 512 byte buffers require use of the RCTL register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: turn all bond_parm_tbls constHolger Eitzenberger
Turn all bond_parm_tbls const. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: make tbl argument to bond_parse_parm() constHolger Eitzenberger
bond_parse_parm() parses a parameter table for a particular value and is therefore not modifying the table at all. Therefore make the 2nd argument const, thus allowing to make the tables const later. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: remove duplicate declarationsHolger Eitzenberger
Remove some declarations from bonding.c as they are declared in bonding.h already. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: use pr_debug instead of own macrosHolger Eitzenberger
Use pr_debug() instead of own macros. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: fix compile error if debug enabledHolger Eitzenberger
This is what I get if debug is enabled: drivers/net/bonding/bond_ipv6.c: In function 'bond_na_send': drivers/net/bonding/bond_ipv6.c:75: error: 'slave' undeclared (first use in this function) drivers/net/bonding/bond_ipv6.c:75: error: (Each undeclared identifier is reported only once drivers/net/bonding/bond_ipv6.c:75: error: for each function it appears in.) This patch fixes that. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: use table for mode namesHolger Eitzenberger
Use a small array in bond_mode_name() for the names, thus saving some space: before text data bss dec hex filename 57736 9372 344 67452 1077c drivers/net/bonding/bonding.ko after text data bss dec hex filename 57441 9372 344 67157 10655 drivers/net/bonding/bonding.ko Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: add and use bond_is_lb()Holger Eitzenberger
Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09phy: Add LSI ET1011C PHY driverChaithrika U S
Adds LSI ET1011C PHY driver. This driver is used by TI DM646x EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09myri10ge: check fragmentation in LRO get_frag_header()Brice Goglin
Add a fragmentation check to myri10ge's LRO get_frag_header() callback. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08hydra: fix compilationAlexey Dobriyan
drivers/net/hydra.c:163: error: 'hydra_netdev_ops' undeclared (first use in this function) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08netdevice: Kill netdev->privWang Chen
This is the last shoot of this series. After I removing all directly reference of netdev->priv, I am killing "priv" of "struct net_device" and fixing relative comments/docs. Anyone will not be allowed to reference netdev->priv directly. If you want to reference the memory of private data, use netdev_priv() instead. If the private data is not allocted when alloc_netdev(), use netdev->ml_priv to point that memory after you creating that private data. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08staging-winbond: Kill directly reference of netdev->privWang Chen
This driver is not yet finished. At this time, we don't know how netdev be created and how private data be allocated. So, simply use netdev_priv() now and leave some temp comment. Compile test only. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-06staging-slicoss: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-06staging-p80211: Kill directly reference of netdev->privWang Chen
In this driver, netdev's private data is wlandevice_t. And the wlandev(type of wlandevice_t) is exist before netdev be allocated. So use netdev->ml_priv to point to the private data. I am not sure whether I should consider the kernel version older than 2.3.38. Because in those kernels, netdevice_t is "structure dev" instead of "structure net_device" and of course "dev->ml_priv" will cause compile error. But before my patch, in function wlan_setup(), there is a ether_setup(net_device) which already broke kernels which older than 2.3.38. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-06s390_net: Kill directly reference of netdev->privWang Chen
The private data comes from ccwgroup_device. So just don't allocate private data memory when do alloc_netdev() and use netdev->ml_priv to reference private data. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-06net: Fix incorrect use of loose in spider_net.cNick Andrew
Fix incorrect use of loose in spider_net.c It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-sta.c
2008-12-05tty: driverdata and discdata are void *Alan Cox
Remove all the extra casting while we are cleaning up Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05tty: Flags should be accessed via the foo_bit interfacesAlan Cox
We have various drivers that poke around directly and we need to clean this up before it causes problems. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-12-05igb/e1000e: Naming interrupt vectorsAlexander Duyck
Change interrupt vector naming to match recent changes from Robert Olsson. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05ath9k: Use GFP_ATOMIC when allocating TX private areaLuis R. Rodriguez
Using GFP_KERNEL was wrong and produces a 'scheduling while atomic' bug as we're in a tasklet. Also, check for proper return values now, in case allocation fails and be sure to stop the TX queue in case of memory issues but gaurantee the TX queue will eventually be woken up. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Check for pci_map_single() errorsLuis R. Rodriguez
pci_map_single() can fail so detect those errors with pci_dma_mapping_error() and deal with them accordingly. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Correctly initialize AID during set_key()Ivo van Doorn
Request the AID from hardware and provide this id to the driver (in case they need it). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Move crypto TX descriptor handling to rt2x00crypto.cIvo van Doorn
Move all code which determines the right TX descriptor fields specific to crypto support into rt2x00crypto.c. This makes the code in rt2x00queue more simpler and better concentrates all crypto code into a single location. With this we can also remove some ifdefs in rt2x00queue.c since the code inside the ifdef is either very small, or only calling empty functions (see empty function definitions in rt2x00lib.h). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Fix check for BSS info changesIvo van Doorn
Fix ERP configuration, due to a too strict changes flags checking we never updated the short slot time or basic rate mask when no other changes were made at the same time. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05generic swap(): ath9k: rename swap() to swap_array()Wu Fengguang
In preparation for the introduction of a generic swap() macro. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Cc: Senthil Balasubramanian <senthilkumar@atheros.com> Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Add RXDONE_CRYPTO_IV/ICV flagsIvo van Doorn
Drivers should notify rt2x00lib when they provide the IV/ICV data. This adds some flexibility to drivers which can't provide all information. * rt2500usb provides ICV inside the frame * rt2800pci doesn't provide IV/ICV * rt2800usb doesn't provide IV/ICV Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwl3945 : Fix a-band association for passive channelsAbhijeet Kolekar
Patch does following things 1) This patch fixes the a-band association for passive channels with new uCode feature that it allows direct scan on passive channels after auto-switch from passive to active. This enables sending of direct probes on passive channels, as long as some traffic is detected on that channel. This improves the scanning for hidden SSIDs in A-band,which is all passive channels. This patch fixes the bug no 1748. http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1748 2) This fix will only work with uCode version 15.28.2.8 and above. Prior versions of uCode would work only if we heard the traffic within active dwell time, which is much shorter than passive dwell time and is shorter than typical beacon periods. This patch also provids full active dwell time even if we hear traffic late in passive dwell. 3) uCode API version is incremented to 2. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: rely on API version read from firmwareReinette Chatre
This adds the infrastructure to support older firmware APIs. The API version number is stored as part of the filename, we first try to load the most recent firmware and progressively try lower versions. The API version is also read from the firmware self and stored as part of the iwl_priv structure. Only firmware that is supported by driver will be loaded. The version number read from firmware is compared to supported versions in the driver not the API version used as part of filename. An example using this new infrastrucure: if (IWL_UCODE_API(priv->ucode_ver) >= 2) { Driver interacts with Firmware API version >= 2. } else { Driver interacts with Firmware API version 1. } Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: store ucode version numberChatre, Reinette
We store the ucode version number as part of iwl_priv/iwl3945_priv. This enables us to determine if particular ucode has support for features in order to have driver support more than one ucode API. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: fix DMA channel number in iwl_txq_ctx_stopZhu Yi
The patch fixes the misuse of DMA channel number by Tx queue number in iwl_tx_ctx_stop(). The problem was originally reported by Wu Fengguang who complains iwlagn driver takes too long time when issuing `ifconfig wlan0 down`. The patch now decreases the interface bring down time from 2 seconds to 0.8 second. This fixes bugs: http://bugzilla.kernel.org/show_bug.cgi?id=11956 http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1790 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwl3945: Fix iwl3945 rate scaling.Abbas, Mohamed
3945 rate scaling was broken in recent tree. This patch fix the following: 1- Get TX response info and update rates window. 2- Rate scaling selection. 3- Flush window timer. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwl3945: add debugfs supportAbbas, Mohamed
Add debugfs support to 3945 driver to display rs info. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: move channels sysfs to debugfsWinkler, Tomas
This patch moves channels info display from sysfs to debugfs. This shows channel information as stored in NIC EEPROM. This is useful in debugging CRDA or iwl goes setting so it belongs rather to debugfs then to sysfs. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: move disable/enable interrupts to iwl-core.cWinkler, Tomas
This patch moves iwl_enable_interrupts and iwl_disable_interrupts functions to iwl-core.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwl3945: Select correct sta ID from find_station()Samuel Ortiz
The find_station routine needs to look at the IWL_AP_ID entry if we're a STA. Currently, it only looks for STA entries which causes HW crypto to fail. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: fix printk size format errorZhu Yi
The patch fixes a printk size format error. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: move host command check function into separate fileWinkler, Tomas
This patch moves iwl_check_rxon_cmd into iwl-agn-hcmd-check.c This function compiled out in none debugging or non development mode and more. We haven't decided which one yet hence preserving the current 'always compile' state. More functions will be added to the file namely for checking TX and LQ commands. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Release rt2x00 2.2.3Ivo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Implement HW encryption (rt2500usb)Ivo van Doorn
rt2500usb supports hardware encryption. rt2500usb supports up to 4 shared and pairwise keys. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Remove duplicate codeIvo van Doorn
Simplify rt2x00lib_config_antenna() by moving duplicate code into a seperate static inlined function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Store retry limit valuesIvo van Doorn
Store retry limit values in the rt2x00dev structure. This allows the removal of the FIXME where we assumed the long retry is only used when working with RTS frames. Instead we should check the current retry limit values and decide if the required retry count for this frame is a long or short retry. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 21:27:11 +0000