aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-06-20drm: only trust core drm ioctls - driver ioctls are a mess.Dave Airlie
So driver ioctls need a full auditing before we can make this change. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-20drm/i915: add support for Intel series 4 chipsets.Zhenyu Wang
Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: add hier-z registers for r300 and r500 chipsetsDave Airlie
2008-06-19drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTATAlex Deucher
According to the hw guys, you should use DSTCACHE_CTLSTAT to flush the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: switch IGP gart to use radeon_write_agp_base()Alex Deucher
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: Restore sw interrupt on resumeDennis Kasprzyk
Fixes performance drop after suspend/resume on some systems. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/r500: add support for AGP based cards.Dave Airlie
AGP registers weren't programmed properly for r500 cards. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: fix texture uploads with large 3d textures (bug 13980)Roland Scheidegger
Texture uploads could hit the blitter coordinate limit, adjust the texture offset when uploading the pieces. Make sure to check the end address of the upload too. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: add initial r500 support.Dave Airlie
This contains all the command buffer processing for the r500 cards. It doesn't yet contain vblank support. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: init pipe setup in kernel code.Alex Deucher
This inits the card pipes in the kernel and lets userspace getparam the correct setup. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: fixup radeon_do_engine_resetAlex Deucher
Cleanup do engine reset for different chip families. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: fix pixcache and purge/cache flushing registersAlex Deucher
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: write AGP_BASE_2 on chips that support it.Alex Deucher
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 supportAlex Deucher
We only support RS480 (AMD based IGP) at the moment not RS400 (Intel based IGP) ones. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/radeon: IGP clean up register and magic numbers.Alex Deucher
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/rs690: set base 2 to 0.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm/rs690: set all of gart base address.Dave Airlie
Docs state bits 4-11 maps to bits 32-39 of the 40-bit range Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19radeon: add production microcode from AMDAlex Deucher
This adds production microcode for r100->r500 from AMD. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-19drm: pcigart use proper pci map interfaces.Dave Airlie
Switch to using more correct pci dma mapping interfaces. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-13drm: the sg alloc ioctl should write back the handle to userspaceDave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-13drm: use drms ioctl cmd not what we get passed from userspace.Johannes Weiner
This enforces us to use the drm ioctl types so read/write works correctly and not believe what userspace tells us. It does this hopefully without breaking the drm api. Fixes bug from thread: BUG: unable to handle kernel NULL pointer dereference (drm_getunique) Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-06-12fsl-diu-db: compile fixJeff Mahoney
This patch fixes a compile failure in 2.6.26-rc5-git5. The variable is expected to be called ofdev. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: don't use reset-resume if drivers don't support it USB: isp1760: Assign resource fields before adding hcd isight_firmware: Avoid crash on loading invalid firmware USB: fix build bug in USB_ISIGHTFW
2008-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: kobject: Documentation Spelling Patch dev_set_name: fix missing kernel-doc
2008-06-11Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (23 commits) ACPICA: fix stray va_end() caused by mis-merge ACPI: Reject below-freezing temperatures as invalid critical temperatures ACPICA: Fix for access to deleted object <regression> ACPICA: Fix to make _SST method optional ACPICA: Fix for Load operator, load table at the namespace root ACPICA: Ignore ACPI table signature for Load() operator ACPICA: Fix to allow zero-length ASL field declarations ACPI: use memory_read_from_buffer() bay: exit if notify handler cannot be installed dock.c remove trailing printk whitespace proper prototype for acpi_processor_tstate_has_changed() ACPI: handle invalid ACPI SLIT table PNPACPI: use _CRS IRQ descriptor length for _SRS pnpacpi: fix shareable IRQ encode/decode pnpacpi: fix IRQ flag decoding MAINTAINERS: update ACPI homepage ACPI 2.6.26-rc2: Add missing newline to DSDT/SSDT warning message ACPI: EC: Use msleep instead of udelay while waiting for event. thinkpad-acpi: fix LED handling on older ThinkPads thinkpad-acpi: fix initialization error paths ...
2008-06-11USB: don't use reset-resume if drivers don't support itLinus Torvalds
This patch tries to identify which devices are able to accept reset-resume handling, by checking that there is at least one interface driver bound and that all of the drivers have a reset_resume method defined. If these conditions don't hold then during resume processing, the device is logicall disconnected. This is only a temporary fix. Later on we will explicitly unbind drivers that can't handle reset-resumes. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Oliver Neukum <oliver@neukum.org> Cc: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-11USB: isp1760: Assign resource fields before adding hcdNate Case
This fixes the bogus "io mem 0x00000000" message printed during driver init due to hcd->rsrc_start being assigned after the call to usb_add_hcd(). Signed-off-by: Nate Case <ncase@xes-inc.com> Acked-by: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-11isight_firmware: Avoid crash on loading invalid firmwareMatthew Garrett
Different tools generate slightly different formats of the isight firmware. Ensure that the firmware buffer is not overrun, while still ensuring that the correct amount of data is written if trailing data is present. Signed-off-by: Matthew Garrett <mjg@redhat.com> Report-by: Justin Mattock <justinmattock@gmail.com> Tested-by: Justin Mattock <justinmattock@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-11USB: fix build bug in USB_ISIGHTFWIngo Molnar
USB: fix build bug in USB_ISIGHTFW -tip tree testing found this build bug: drivers/built-in.o: In function `isight_firmware_load': isight_firmware.c:(.text+0x1ade08): undefined reference to `request_firmware' isight_firmware.c:(.text+0x1adf9c): undefined reference to `release_firmware' select FW_LOADER in USB_ISIGHTFW. From: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-11dev_set_name: fix missing kernel-docRandy Dunlap
Fix kernel-doc for new dev_set_name() function: Warning(lin2626-rc5//drivers/base/core.c:767): No description found for parameter 'fmt' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-11ACPICA: fix stray va_end() caused by mis-mergeLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPI: Reject below-freezing temperatures as invalid critical temperaturesArjan van de Ven
My laptop thinks that it's a good idea to give -73C as the critical CPU temperature.... which isn't the best thing since it causes a shutdown right at bootup. Temperatures below freezing are clearly invalid critical thresholds so just reject these as such. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPICA: Fix for access to deleted object <regression>Bob Moore
Fixes problem introduced in 20080123, with fix for Unload operator. Parse tree object can be already deleted; must use the opcode within the WalkState. ACPI: kmemcheck: Caught 16-bit read from freed memory http://bugzilla.kernel.org/show_bug.cgi?id=10669 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPICA: Fix to make _SST method optionalBob Moore
Fixes a problem introduced in 20080514 where the status of execution of _SST is incorrectly returned to the caller. _SST is optional, and if it is AE_NOT_FOUND, the exception should be ignored. http://www.acpica.org/bugzilla/show_bug.cgi?id=716 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPICA: Fix for Load operator, load table at the namespace rootBob Moore
This reverts a change introduced in version 20071019. The table is now loaded at the namespace root even though this goes against the ACPI specification. This provides compatibility with other ACPI implementations. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPICA: Ignore ACPI table signature for Load() operatorBob Moore
Only "SSDT" is acceptable to the ACPI spec, but tables are seen with OEMx and null sigs. Therefore, signature validation is worthless. Apparently MS ACPI accepts such signatures, ACPICA must be compatible. http://bugzilla.kernel.org/show_bug.cgi?id=10454 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPICA: Fix to allow zero-length ASL field declarationsBob Moore
Allows null field list in Field(), BankField(), and IndexField(). 2.6.26-rc1 regression: ACPI fails to load SDT. - Dell M1530 http://bugzilla.kernel.org/show_bug.cgi?id=10606 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPI: use memory_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11bay: exit if notify handler cannot be installedHolger Macht
If acpi_install_notify_handler() for a bay device fails, the bay driver is superfluous. Most likely, another driver (like libata) is already caring about this device anyway. Furthermore, register_hotplug_dock_device(acpi_handle) from the dock driver must not be called twice with the same handler. This would result in an endless loop consuming 100% of CPU. So clean up and exit. Signed-off-by: Holger Macht <hmacht@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11dock.c remove trailing printk whitespaceTim Pepper
Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11proper prototype for acpi_processor_tstate_has_changed()Adrian Bunk
This patch adds a proper prototype for acpi_processor_tstate_has_changed() in include/acpi/processor.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPI: handle invalid ACPI SLIT tableFenghua Yu
This is a SLIT sanity checking patch. It moves slit_valid() function to generic ACPI code and does sanity checking for both x86 and ia64. It sets up node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid SLIT table on ia64. It also cleans up unused variable localities in acpi_parse_slit() on x86. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11PNPACPI: use _CRS IRQ descriptor length for _SRSBjorn Helgaas
When configuring the resources of an ACPI device, we first evaluate _CRS to get a template of resource descriptors, then fill in the specific resource values we want, and finally evaluate _SRS to actually configure the device. Some resources have optional fields, so the size of encoded descriptors varies depending on the specific values. For example, IRQ descriptors can be either two or three bytes long. The third byte contains triggering information and can be omitted if the IRQ is edge-triggered and active high. The BIOS often assumes that IRQ descriptors in the _SRS buffer use the same format as those in the _CRS buffer, so this patch enforces that constraint. The "Start Dependent Function" descriptor also has an optional byte, but we don't currently encode those descriptors, so I didn't do anything for those. I have tested this patch on a Toshiba Portege 4000. Without the patch, parport_pc claims the parallel port only if I use "pnpacpi=off". This patch makes it work with PNPACPI. This is an extension of a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c42 References: http://bugzilla.kernel.org/show_bug.cgi?id=5832 Enabling ACPI Plug and Play in kernels >2.6.9 kills Parallel support http://bugzilla.kernel.org/show_bug.cgi?id=9487 buggy firmware expects four-byte IRQ resource descriptor (was: Serial port disappears after Suspend on Toshiba R25) http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1d5b285da1893b90507b081664ac27f1a8a3dc5b related ACPICA fix Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11pnpacpi: fix shareable IRQ encode/decodeBjorn Helgaas
When we encode IRQ resources, we should use the "shareable" flag we got from _PRS rather than guessing based on the IRQ trigger mode. This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11pnpacpi: fix IRQ flag decodingBjorn Helgaas
When decoding IRQ trigger mode and polarity, it is not enough to mask by IORESOURCE_BITS because there are now additional bits defined. For example, if IORESOURCE_IRQ_SHAREABLE was set, we failed to set *triggering and *polarity at all. I can't point to a failure that this patch fixes, but bugs in this area have caused problems when resuming after suspend, for example: http://bugzilla.kernel.org/show_bug.cgi?id=6316 http://bugzilla.kernel.org/show_bug.cgi?id=9487 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/152187 This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 [rene.herman@keyaccess.nl: fix comment] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPI 2.6.26-rc2: Add missing newline to DSDT/SSDT warning messageAlistair John Strachan
As of recently (probably 2.6.26-rc1) I've been getting the following mangling in the kernel log: [4294014.568167] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d This is due to a missing newline character in the first message. The following patch against 2.6.26-rc2 fixes it. Please apply. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11ACPI: EC: Use msleep instead of udelay while waiting for event.Alexey Starikovskiy
http://bugzilla.kernel.org/show_bug.cgi?id=10724 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11thinkpad-acpi: fix LED handling on older ThinkPadsHenrique de Moraes Holschuh
The less tested codepaths for LED handling, used on ThinkPads 570, 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 and maybe a few others, would write data to kernel memory it had no business touching, for leds number 3 and above. If one is lucky, that illegal write would cause an OOPS, but chances are it would silently corrupt a byte. The problem was introduced in commit af116101, "ACPI: thinkpad-acpi: add sysfs led class support to thinkpad leds (v3.2)". Fix the bug by refactoring the entire code to be far more obvious on what it wants to do. Also do some defensive "constification". Issue reported by Karol Lewandowski <lmctlx@gmail.com> (he's an lucky guy and got an OOPS instead of silent corruption :-) ). Root cause of the OOPS identified by Adrian Bunk <bunk@kernel.org>. Thanks, Adrian! Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Tested-by: Karol Lewandowski <lmctlx@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11thinkpad-acpi: fix initialization error pathsHenrique de Moraes Holschuh
Rework some subdriver init and exit handlers, in order to fix some initialization error paths that were missing, or broken. Hitting those bugs should be extremely rare in the real world, but should that happen, thinkpad-acpi would fail to dealocate some resources and a reboot might well be needed to be able to load the driver again. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-11thinkpad-acpi: SW_RADIO to SW_RFKILL_ALL renameHenrique de Moraes Holschuh
Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following 5adad0133907790c50283bf03271d920d6897043 "Input: rename SW_RADIO to SW_RFKILL_ALL". Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 04:31:06 +0000