aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-01-06[PATCH] memhotplug: register_memory should be globalAndy Whitcroft
register_memory is global and declared so in linux/memory.h. Update the HOTPLUG specific definition to match. This fixes a compile warning when HOTPLUG is enabled. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] memhotplug: register_ and unregister_memory_notifier should be globalAndy Whitcroft
Both register_memory_notifer and unregister_memory_notifier are global and declared so in linux/memory.h. Update the HOTPLUG specific definitions to match. This fixes a compile warning when HOTPLUG is enabled. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] nbd: fix TX/RX race conditionHerbert Xu
Janos Haar of First NetCenter Bt. reported numerous crashes involving the NBD driver. With his help, this was tracked down to bogus bio vectors which in turn was the result of a race condition between the receive/transmit routines in the NBD driver. The bug manifests itself like this: CPU0 CPU1 do_nbd_request add req to queuelist nbd_send_request send req head for each bio kmap send nbd_read_stat nbd_find_request nbd_end_request kunmap When CPU1 finishes nbd_end_request, the request and all its associated bio's are freed. So when CPU0 calls kunmap whose argument is derived from the last bio, it may crash. Under normal circumstances, the race occurs only on the last bio. However, if an error is encountered on the remote NBD server (such as an incorrect magic number in the request), or if there were a bug in the server, it is possible for the nbd_end_request to occur any time after the request's addition to the queuelist. The following patch fixes this problem by making sure that requests are not added to the queuelist until after they have been completed transmission. In order for the receiving side to be ready for responses involving requests still being transmitted, the patch introduces the concept of the active request. When a response matches the current active request, its processing is delayed until after the tranmission has come to a stop. This has been tested by Janos and it has been successful in curing this race condition. From: Herbert Xu <herbert@gondor.apana.org.au> Here is an updated patch which removes the active_req wait in nbd_clear_queue and the associated memory barrier. I've also clarified this in the comment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: <djani22@dynamicweb.hu> Cc: Paul Clements <Paul.Clements@SteelEye.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-05Merge http://oss.oracle.com/git/ocfs2Linus Torvalds
2006-01-05Merge with http://kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitJody McIntyre
2006-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
2006-01-06[PATCH] pcmcia: add some IDs for ide-cs and dtl1_csRichard Purdie
Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: cleanup cs.c, reduce sizeDaniel Ritz
kill the socket_shutdown()/shutdown_socket() confusion by making it one single function. move cs_socket_put() in there. nicer to read and smaller: original: text data bss dec hex filename 25181 1076 32 26289 66b1 drivers/pcmcia/pcmcia_core.ko patched: text data bss dec hex filename 24973 1076 32 26081 65e1 drivers/pcmcia/pcmcia_core.ko Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] drivers/pcmcia/cistpl.c: fix endian warningsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: kzalloc conversionDominik Brodowski
Convert users of kmalloc and memset to kzalloc Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: no probing of ioports on PARISCDominik Brodowski
Do not wildly probe the IO ports we're trying to use on PARISC. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: export stored values in sysfsDominik Brodowski
Export the stored values instead of re-reading everything in the socket information sysfs files, and make them accessible to all users, not only to root. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] 8xx PCMCIA: support for MPC885ADS and MPC866ADSVitaly Bordug
This adds PCMCIA support for both MPC885ADS and MPC866ADS. This is established not together with FADS, because 885 does not have io_block_mapping() for BCSR area. Also, some cleanups done both for 885ADS and MBX. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] m8xx_pcmcia: support MAP_AUTOSZ required for CF cardsVitaly Bordug
This fixes misconfiguration that could result in odd work of some old CF cards. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: properly handle static mem, but dynamic io socketsDominik Brodowski
Some PCMCIA sockets have statically mapped memory windows, but dynamically mapped IO windows. Using the "nonstatic" socket library is inpractical for them, as they do neither need a resource database (as we can trust the kernel resource database on m68k and ppc) nor lots of other features of that library. Let them get a small "iodyn" socket library (105 lines of code) instead. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe ↵Dominik Brodowski
callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: remove dev_list from driversDominik Brodowski
The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: remove old detach mechanismDominik Brodowski
Remove the old "detach" mechanism as it is unused now. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callbackDominik Brodowski
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06[PATCH] pcmcia: merge suspend into device modelDominik Brodowski
Merge the suspend and resume methods for 16-bit PCMCIA cards into the device model -- for both runtime power management and suspend to ram/disk. Bugfix in ds.c by Richard Purdie Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] pcmcia: new suspend coreDominik Brodowski
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] yenta: make bridge specific init code configurableDaniel Ritz
Make the bridge specific initialization code config options depending on CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are available. Disabling all of the specific tweaks cuts off more than half of yenta_socket.ko. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] pcmcia: validate_mem fixAndrew Morton
Also return a value if CONFIG_PCMCIA_PROBE is not set. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] pcmcia: validate_mem shouldn't be voidDominik Brodowski
Add a return value to pcmcia_validate_mem. Only if we have enough memory available to map the CIS, we should proceed in trying to determine information about the device. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] pcmcia: remove get_socket callbackDominik Brodowski
The .get_socket callback is never used by the PCMCIA core, therefore remove it. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] yenta: optimize interrupt handlerDaniel Ritz
Don't waste cpu time in yenta interrupt handler when the interrupt was for another device. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[PATCH] pcmcia: avoid macro usage in cistplPavel Machek
Fix macro abuse in pcmcia. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05[ATYFB]: Fix onboard video on SPARC Blade 100 for 2.6.{13,14,15}Luis F. Ortiz
I have recently been switching from using 2.4.32 on my trusty old Sparc Blade 100 to using 2.6.15 . Some of the problems I ran into were distorted video when the console was active (missing first character, skipped dots) and when running X windows (colored snow, stripes, missing pixels). A quick examination of the 2.6 versus 2.4 source for the ATY driver revealed alot of changes. A closer look at the code/data for the 64GR/XL chip revealed two minor "typos" that the rewriter(s) of the code made. The first is a incorrect clock value (230 .vs. 235) and the second is a missing flag (M64F_SDRAM_MAGIC_PLL). Making both these changes seems to have fixed my problem. I tend to think the 235 value is the correct one, as there is a 29.4 Mhz clock crystal close to the video chip and 235.2 (29.4*8) is too close to 235 to make it a coincidence. The flag for M64F_SDRAM_MAGIC_PLL was dropped during the changes made by adaplas in file revision 1.72 on the old bitkeeper repository. The change relating to the clock rate has been there forever, at least in the 2.6 tree. I'm not sure where to look for the old 2.5 tree or if anyone cares when it happened. On SPARC Blades 100's, which use the ATY MACH64GR video chipset, the clock crystal frequency is 235.2 Mhz, not 230 Mhz. The chipset also requires the use of M64F_SDRAM_MAGIC_PLL in order to setup the PLL properly for the DRAM. Signed-off-by: Luis F. Ortiz <lfo@Polyad.Org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-05Merge with http://kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitJody McIntyre
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
Trivial manual merge fixup for usb_find_interface clashes.
2006-01-04[PATCH] Fix IXP4xx watchdog errata workaroundDeepak Saxena
The IXP4xx driver bails out on all A0 CPUs, but it should only do so on IXP42x as IXP46x has functioning HW. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/perex/alsaLinus Torvalds
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
2006-01-04Merge branch 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-01-04Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
2006-01-04Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
2006-01-04[PATCH] drivers/base/power/runtime.c: #if 0 dpm_set_power_state()Adrian Bunk
This patch #if 0's an unused global function. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] Driver core: only all userspace bind/unbind if CONFIG_HOTPLUG is enabledGreg Kroah-Hartman
Thanks to drivers making their id tables __devinit, we can't allow userspace to bind or unbind drivers from devices manually through sysfs. So we only allow this if CONFIG_HOTPLUG is enabled. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] Driver Core: Rearrange exports in platform.cDmitry Torokhov
Driver core: rearrange exports in platform.c The new way is to specify export right after symbol definition. Rearrange exports to follow new style to avoid mixing two styles in one file. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] Driver Core: Add platform_device_del()Dmitry Torokhov
Driver core: add platform_device_del function Having platform_device_del90 allows more straightforward error handling code in drivers registering platform devices. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] Input: add modalias supportRusty Russell
Here's the patch for modalias support for input classes. It uses comma-separated numbers, and doesn't describe all the potential keys (no module currently cares, and that would make the strings huge). The changes to input.h are to move the definitions needed by file2alias outside __KERNEL__. I chose not to move those definitions to mod_devicetable.h, because there are so many that it might break compile of something else in the kernel. The rest is fairly straightforward. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] ide: MODALIAS support for autoloading of ide-cd, ide-disk, ...Kay Sievers
IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ... Add MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and ide-tape, to autoload these modules depending on the probed media type of the IDE device. It is used by udev and replaces the former agent shell script of the hotplug package, which was required to lookup the media type in the proc filesystem. Using proc was racy, cause the media file is created after the hotplug event is sent out. The module autoloading does not take any effect, until something like the following udev rule is configured: SUBSYSTEM=="ide", ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" The module ide-scsi will not be autoloaded, cause it requires manual configuration. It can't be, and never was supported for automatic setup in the hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported media types, would just lead to a default blacklist entry anyway. $ modinfo ide-disk filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko description: ATA DISK Driver alias: ide:*m-disk* license: GPL ... $ modprobe -vn ide:m-disk insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko $ cat /sys/bus/ide/devices/0.0/modalias ide:m-disk It also adds attributes to the IDE device: $ tree /sys/bus/ide/devices/0.0/ /sys/bus/ide/devices/0.0/ |-- bus -> ../../../../../../../bus/ide |-- drivename |-- media |-- modalias |-- power | |-- state | `-- wakeup `-- uevent $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media} ide:m-disk hda disk Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] Allow overlapping resources for platform devicesKumar Gala
There are cases in which a device's memory mapped registers overlap with another device's memory mapped registers. On several PowerPC devices this occurs for the MDIO bus, whose registers tended to overlap with one of the ethernet controllers. By switching from request_resource to insert_resource we can register the MDIO bus as a proper platform device and not hack around how we handle its memory mapped registers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] Hold the device's parent's lock during probe and removeAlan Stern
This patch (as604) makes the driver core hold a device's parent's lock as well as the device's lock during calls to the probe and remove methods in a driver. This facility is needed by USB device drivers, owing to the peculiar way USB devices work: A device provides multiple interfaces, and drivers are bound to interfaces rather than to devices; Nevertheless a reset, reset-configuration, suspend, or resume affects the entire device and requires the caller to hold the lock for the device, not just a lock for one of the interfaces. Since a USB driver's probe method is always called with the interface lock held, the locking order rules (always lock parent before child) prevent these methods from acquiring the device lock. The solution provided here is to call all probe and remove methods, for all devices (not just USB), with the parent lock already acquired. Although currently only the USB subsystem requires these changes, people have mentioned in prior discussion that the overhead of acquiring an extra semaphore in all the prove/remove sequences is not overly large. Up to now, the USB core has been using its own set of private semaphores. A followup patch will remove them, relying entirely on the device semaphores provided by the driver core. The code paths affected by this patch are: device_add and device_del: The USB core already holds the parent lock, so no actual change is needed. driver_register and driver_unregister: The driver core will now lock both the parent and the device before probing or removing. driver_bind and driver_unbind (in sysfs): These routines will now lock both the parent and the device before binding or unbinding. bus_rescan_devices: The helper routine will lock the parent before probing a device. I have not tested this patch for conflicts with other subsystems. As far as I can see, the only possibility of conflict would lie in the bus_rescan_devices pathway, and it seems pretty remote. Nevertheless, it would be good for this to get a lot of testing in -mm. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] driver kill hotplug word from sn and others fixPaul Jackson
The first of these changes s/hotplug/uevent/ was needed to compile sn2_defconfig (ia64/sn). The other three files changed are blind changes of all remaining bus_type.hotplug references I could find to bus_type.uevent. This patch attempts to finish similar changes made in the gregkh-driver-kill-hotplug-word-from-driver-core Nov 22 patch. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[PATCH] driver core: replace "hotplug" by "uevent"Kay Sievers
Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>