aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-01-27i2c: normal_i2c can be made const (rtc drivers)Jean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
2008-01-27i2c: Constify client address dataMark M. Hoffman
This patch allows much of the I2C client address data to move from initdata into text. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-algo-pcf: Delete broken 10-bit address supportJean Delvare
The 10-bit address support in i2c-algo-pcf is so heavily broken that it can't have ever been used. Nobody ever complained, so I'll take it that nobody needs it. Let's just delete it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-algo-bit: Fix NAK/ARB commentsDavid Brownell
Update comments and logging on return path for byte writes. NAK is an error, to be reported or optionally ignored. Timeouts are always errors. Lost arbitration is not currently handled, so don't even list it as an option in the error message. Don't return bogus EFAULT code for inappropriate NAK; EIO is better, there is no bad userspace address in question. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-algo-bit: Whitespace fixes (+ NAK/ARB comments)David Brownell
Fix *LOTS* of whitespace goofs and checkpatch.pl warnings, strangely parenthesized ternary expressions, and other CodingStyle glitches. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-pxa: Remove hardcoded #ifdef and use cpu_is_pxa27xeric miao
remove #ifdef CONFIG_PXA27x .. #endif and use cpu_is_pxaXXXX() macros so that a single binary can support PXA25x/PXA27x/PXA3xx at run-time. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: some overdue driver removalAdrian Bunk
This patch contains the overdue removal of three I2C drivers. [JD: In fact only i2c-ixp4xx can be removed at the moment, the other two platforms don't implement the generic GPIO layer yet.] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: the scheduled I2C RTC driver removalAdrian Bunk
This patch contains the scheduled removal of legacy I2C RTC drivers with replacement drivers. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-stub: Use a single array for byte and word operationsJean Delvare
This mimics the behavior of actual SMBus chips better. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Mark M. Hoffman <mhoffman@lightlink.com>
2008-01-27i2c/tsl2550: Add power management addedRodolfo Giometti
Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c: Add support for the PCF8575 chipBart Van Assche
Signed-off-by: Bart Van Assche <bart.vanassche@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-ibm_iic: Whitespace cleanupStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-pasemi: use i2c_add_numbered_adapter()Olof Johansson
Use numbered adapter registration to always have the same hardware bus show up at the same number. PWRficient 1682M has three buses, they are all on the same PCI device but different functions. So do the simple thing and register them based on function number. Future products, if having a different number of busses, are expected to have similar behaviour w.r.t. device/function layout. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27i2c-nforce2: The nForce2 can do block transactionsJean Delvare
My guess is that all the chips supported by this driver support block transactions and reset, but for now we play it safe and only list the ones for which this was actually tested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Oleg Ryjkov <olegr@olegr.ca>
2008-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (63 commits) ide: remove REQ_TYPE_ATA_CMD ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requests ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests ide: fix final status check in drive_cmd_intr() ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr() ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2) ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILE ide: initialize rq->cmd_type in ide_init_drive_cmd() callers ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2) ide: kill DATA_READY define ide: task_end_request() fix ide: use rq->nr_sectors in task_end_request() ide: remove needless ->cursg clearing from task_end_request() ide: set IDE_TFLAG_IN_* flags before queuing/executing command ide-tape: fix handling of non-special requests in ->end_request method ide: fix final status check in task_in_intr() ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd() ide: fix ->io_32bit race in ide_taskfile_ioctl() cmd64x: remove /proc/ide/cmd64x ide: remove broken disk byte-swapping support ...
2008-01-26ide: remove REQ_TYPE_ATA_CMDBartlomiej Zolnierkiewicz
Based on the earlier work by Tejun Heo. All users are gone so we can finally remove it. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz
Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz
Based on the earlier work by Tejun Heo. Switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests and make ide_wait_cmd() static. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix final status check in drive_cmd_intr()Bartlomiej Zolnierkiewicz
Don't check for READY_STAT bit being set for PIO-in protocol (makes the final status check in drive_cmd_intr() match the one in task_in_intr()). Also fix function name reported by ide_error() call while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: check BUSY and ERROR status bits before reading data in drive_cmd_intr()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: don't enable local IRQs for PIO-in in driver_cmd_intr() (take 2)Bartlomiej Zolnierkiewicz
Don't enable local IRQs for PIO-in protocol in driver_cmd_intr(). While at it: * Remove redundant rq->cmd_type check. * Read status register after enabling local IRQs for no-data protocol. v2: * Re-add DRQ=1 check lost in v1 (noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILEBartlomiej Zolnierkiewicz
Based on the previous work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: initialize rq->cmd_type in ide_init_drive_cmd() callersBartlomiej Zolnierkiewicz
* Initialize rq->cmd_type in ide_wait_cmd(), ide_cmd_ioctl() and set_pio_mode() (other callers were aleady over-riding rq->cmd_type). * Remove no longer needed rq->cmd_type setup from ide_init_drive_cmd(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)Bartlomiej Zolnierkiewicz
Use wait_drive_not_busy() in drive_cmd_intr(). v2: * Fix wait_drive_not_busy() comment (noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: kill DATA_READY defineBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: task_end_request() fixTejun Heo
task_end_request() modified to always call ide_end_drive_cmd() for taskfile requests. Previously, ide_end_drive_cmd() was called only when IDE_TFLAG_FLAGGED was set. Also, ide_dma_intr() is modified to use task_end_request(). Enables TASKFILE ioctls to get valid register outputs on successful completion. Bart: - ported it over recent IDE changes Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: use rq->nr_sectors in task_end_request()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove needless ->cursg clearing from task_end_request()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: set IDE_TFLAG_IN_* flags before queuing/executing commandBartlomiej Zolnierkiewicz
* Add IDE_TFLAG_{HOB,TF,DEVICE} defines. * Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users. * Remove no longer needed ->tf_flags setup from ide_end_drive_cmd(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide-tape: fix handling of non-special requests in ->end_request methodBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix final status check in task_in_intr()Bartlomiej Zolnierkiewicz
Check for DRQ bit being cleared on the final status check. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: clear HOB bit for REQ_TYPE_ATA_CMD requests in ide_end_drive_cmd()Bartlomiej Zolnierkiewicz
ide_dump_status() may set HOB bit before ide_end_drive_cmd() is called. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix ->io_32bit race in ide_taskfile_ioctl()Tejun Heo
In ide_taskfile_ioctl(), there was a race condition involving drive->io_32bit. It was cleared and restored during ioctl requests but there was no synchronization with other requests. So, other requests could execute with the altered ->io_32bit setting or updated drive->io_32bit could be overwritten by ide_taskfile_ioctl(). This patch adds IDE_TFLAG_IO_16BIT flag to indicate to ide_pio_datablock() that 16-bit I/O is needed regardless of drive->io_32bit settting. Bart: - ported it over recent IDE changes Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26cmd64x: remove /proc/ide/cmd64xBartlomiej Zolnierkiewicz
This belongs to user-space (and only if really needed). text data bss dec hex filename 3874 180 28 4082 ff2 drivers/ide/pci/cmd64x.o.before 2231 180 0 2411 96b drivers/ide/pci/cmd64x.o.after Additionaly to being bloat the code reported incorrect UDMA modes for the reserved values of UDIDETCR0/1 registers. Also while at it remove unused CNTRL_DIS_RA0/1 defines. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove broken disk byte-swapping supportBartlomiej Zolnierkiewicz
Remove broken disk byte-swapping support: - it can cause a data corruption on SMP (or if using PREEMPT on UP) - all data coming from disk are byte-swapped by taskfile_*_data() which results in incorrect identify data being reported by /proc/ide/ and IOCTLs - "hdx=bswap/byteswap" kernel parameter has been broken on m68k host drivers (including Atari/Q40 ones) since 2.5.x days (because of 'hwif' zero-ing) - byte-swapping is limited to PIO transfers (for working with TiVo disks on x86 machines using user-space solutions or dm-byteswap should result in much better performance because DMA can be used) For previous discussions please see: http://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html http://lkml.org/lkml/2004/2/28/111 [ I have dm-byteswap device mapper target if somebody is interested (patch is for 2.6.4 though but I'll dust it off if needed). ] Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: add ide_busy_sleep() helperBartlomiej Zolnierkiewicz
Add ide_busy_sleep() helper and use it in do_probe(), enable_nest() and probe_hwif(). As a nice side-effect this fixes a minor bug in do_probe() (the code was reading status register without any delay). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: make CONFIG_IDEPCI_PCIBUS_ORDER visible and deprecate itBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: move CONFIG_IDEPCI_PCIBUS_ORDER code to ide-scan-pci.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: print banner message once per controller in m68k host driversBartlomiej Zolnierkiewicz
* Print banner message once per controller in m68k host drivers. * Change printk() level to KERN_INFO in buddha, falconide and gayle. * Add banner message to q40ide. This is basically a preparation for the future IDE layer changes. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: add ide_set_irq() inline helperBartlomiej Zolnierkiewicz
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide-pmac: use custom hwif->sg_max_nents only if DMA support is enabledBartlomiej Zolnierkiewicz
Move setting hwif->sg_max_nents from pmac_ide_setup_device() to pmac_ide_setup_dma(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26rapide: remove write-only hwif->hwif_dataBartlomiej Zolnierkiewicz
Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: use ide_init_port_hw() in setup-pci.cBartlomiej Zolnierkiewicz
* Move setting hwif->gendev.parent from ide_pci_setup_ports() to ide_hwif_configure(). * Always set hwif->io_ports in ide_hwif_configure(). * Use ide_init_port_hw() in ide_hwif_configure(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: always use ide_std_init_ports() in setup-pci.cBartlomiej Zolnierkiewicz
* ide_init_hwif_ports() call in setup-pci.c::ide_hwif_configure() doesn't depend on the default cotrol register offset, default IRQ or ppc_ide_md.ide_init_hwif implementations so ide_std_init_ports() can always be used. * Since 'base' is always non-zero and thus hwif->io_ports[IDE_DATA_OFFSET] is also non-zero always clear hwif->noprobe. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26au1xxx-ide: use ide_init_port_hw()Bartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26au1xxx-ide: au_ide_probe() fixesBartlomiej Zolnierkiewicz
* hwif->hold is always set in au_ide_probe() (few lines earlier), no need to set it again * hwif->{channel,select_data,config_data} should be always zero * autotune PIO also if CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is defined Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: make remaining built-in only IDE host drivers modular (take 2)Bartlomiej Zolnierkiewicz
* Make remaining built-in only IDE host drivers modular, add ide-scan-pci.c file for probing PCI host drivers registered with IDE core (special case for built-in IDE and CONFIG_IDEPCI_PCIBUS_ORDER=y) and then take care of the ordering in which all IDE host drivers are probed when IDE is built-in during link time. * Move probing of gayle, falconide, macide, q40ide and buddha (m68k arch specific) host drivers, before PCI ones (no PCI on m68k), ide-cris (cris arch specific), cmd640 (x86 arch specific) and pmac (ppc arch specific). * Move probing of ide-cris (cris arch specific) host driver before cmd640 (x86 arch specific). * Move probing of mpc8xx (ppc specific) host driver before ide-pnp (depends on ISA and none of ppc platform that use mpc8xx supports ISA) and ide-h8300 (h8300 arch specific). * Add "probe_vlb" kernel parameter to cmd640 host driver and update Documentation/ide.txt accordingly. * Make IDE_ARM config option visible so it can also be disabled if needed. * Remove bogus comment from ide.c while at it. v2: * Fix two issues spotted by Sergei: - replace ENOMEM error value by ENOENT in ide-h8300 host driver - fix MODULE_PARM_DESC() in cmd640 host driver Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)Bartlomiej Zolnierkiewicz
* Add mpc8xx_ide_probe() to mpc8xx.c and call it from probe_for_hwifs(). * Convert ide_arm, ide-cris, ide-h8300, ide-pnp, buddha, falconide, gayle, macide, q40ide, cmd640 and mpc8xx host drivers to use ide_device_add(). This removes dependency on ide_generic for these drivers so update ide/Kconfig accordingly. v2: * ide_arm build fix (s/ide_device_idx/ide_device_add/) (Thanks to Christoph Lameter <clameter@sgi.com> for reporting the problem). Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26cmd640: fix dependency on IDE_GENERICBartlomiej Zolnierkiewicz
Make BLK_DEV_CMD640 select IDE_GENERIC. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: move ide_arm_init() call from init_ide_data() to ide_init()Bartlomiej Zolnierkiewicz
* Remove ide_init_port_data() call from ide_arm_init() and move ide_arm_init() call from init_ide_data() to ide_init(). This patch is a preparation for the future changes (and as a side-effect makes obsolete "idex=io[,ctl[,irq]]" kernel parameters work for ide_arm). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 13:53:31 +0000