aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-12-02mac8390: update to net_device_opsStephen Hemminger
Another related 8390 driver. Since this is for nubus, not sure if anyone still has the hardware? Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-02etherh: build fix for net-nextStephen Hemminger
Fix build of ARM etherh driver with new net_device_ops. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29gigaset: get rid of info() and warn() macrosTilman Schmidt
Join the move away from the obsolete info() macro, opencoding the remaining uses. While we're at it, also get rid of the warn() macro by promoting the three remaining uses to err(). Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-29gigaset: remove unnecessary poll methodTilman Schmidt
The N_GIGASET_M101 line discipline implemented by the ser_gigaset driver does not transfer any data from/to userspace through the tty interface. Therefore a poll method is not needed. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28cxgb3: Fix sparse warning and micro-optimize is_pure_response()Roland Dreier
The function is_pure_response() does "ntohl(var) & const" and then essentially just tests whether the result is 0 or not; this can be done more efficiently by computing "var & htonl(const)" instead and doing the byte swap at compile time instead of run time. This change slightly shrinks the compiled code; eg on x86-64 we save a couple of bswapl instructions: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-8 (-8) function old new delta t3_sge_intr_msix_napi 544 536 -8 and this also has the pleasant side effect of fixing a sparse warning: drivers/net/cxgb3/sge.c:2313:15: warning: restricted degrades to integer Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28phy: add the ST ste10Xp PHYsGiuseppe Cavallaro
This patch adds the STMicroelectronics ste10xp PHY device driver. It supports both the ste100p and the ste101p devices. Suspend/resume alredy added. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28phy: Add file missed in previous commit.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28phy: power management supportGiuseppe Cavallaro
This patch adds the power management support into the physical abstraction layer. Suspend and resume functions respectively turns on/off the bit 11 into the PHY Basic mode control register. Generic PHY device starts supporting PM. In order to support the wake-on LAN and avoid to put in power down the PHY device, the MDIO is aware of what the Ethernet device wants to do. Voluntary, no CONFIG_PM defines were added into the sources. Also generic suspend/resume functions are exported to allow other drivers use them (such as genphy_config_aneg etc.). Within the phy_driver_register function, we need to remove the memset. It overrides the device driver owner and it is not good. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28phy: add natsemi PHY driverGiuseppe Cavallaro
This patch adds the PHY device driver for the National Semiconductor DP83865 Gig PHYTER. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28ne2: silence static never defined warningsIlpo Järvinen
These warning originate from 50014f1 (ne2: convert to net_device_ops) which did drop those functions. drivers/net/ne2.c:140: warning: 'ne_open' declared 'static' but never defined drivers/net/ne2.c:141: warning: 'ne_close' declared 'static' but never defined Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28bnx2: use net_device_stats nowadays available in net_deviceIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-28niu: use net_device_stats nowadays available in net_deviceIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27ixgbe: section fixesAl Viro
ixgbe_init_interrupt_scheme() is called from ixgbe_resume(). Build that with CONFIG_PM and without CONFIG_HOTPLUG and you've got a problem. Several helpers called by it also are misannotated __devinit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27igb: Add support for pci-e Advanced Error ReportingAlexander Duyck
Add the calls necessary to enable advanced error reporting for igb on systems with AER enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27e100: cleanup link up/down messagesJeff Kirsher
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27ixgb: cleanup link up/down messagesJeff Kirsher
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27e1000: cleanup link up/down messagesJeff Kirsher
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27ixgbe: cleanup link up/down messagesJeff Kirsher
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. This also makes the messages consistant with other Intel driver link messages. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-27igb: link up/down messages must follow a specific formatAlexander Duyck
The system log messages created on a link status change need to follow a specific format to work with tools some customers use. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/hp-plus.c drivers/net/wireless/ath5k/base.c drivers/net/wireless/ath9k/recv.c net/wireless/reg.c
2008-11-26cxgb3: Update FW loading path.Divy Le Ray
Update FW loading path to accomodate in-kernel images location Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26cxgb3: avoid potential memory leak.Divy Le Ray
Add consistency in alloc_ring() parameter checking to avoid potential memory leaks. alloc_ring() callers are correct fo far. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26cxgb3: set hard_xmit in the netdev_opsDivy Le Ray
Fix t3_eth_xmit() missing into the netdev_ops structure. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-26Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-11-26mac80211_hwsim: fix-up some print_mac merge damageJohn W. Linville
Some print_mac -> %pM conversions got lost in some merge or another... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26p54: fix wmm queue settingsChristian Lamparter
This patch fixes a regression (introduced by "p54: more definitions form lmac_longbow.h and pda.h") It turned out that the "ret" variable wasn't initialized and this caused the following warnings/errors to appear: wmaster1: failed to set TX queue parameters for queue 2 wmaster1: failed to set TX queue parameters for queue 3 wmaster1: failed to set TX queue parameters for queue 1 wmaster1: failed to set TX queue parameters for queue 0 Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use proper TX channel width for setting channelsSujith
The TX channel width of the BSS can be obtained only after association. In all cases, default to HT20 if HT is enabled, and set chan width to HT40 only if the BSS supports it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Code scrubSujith
Merge core.c and base.c Remove Antenna Diversity (unused now). Remove unused chainmask handling code. Comment, indentation scrub. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Provide option to avoid unnecessary fw cachingDavid Kilroy
Make firmware caching on startup optional, and make it default. When the option is not selected and PM_SLEEP is configured, then cache firmware in the suspend pm_notifier. This configuration saves about 64k RAM in normal use, but can lead to a situation where the driver is configured to use a different firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Resume spectrum_cs in the same way as orinoco_csDavid Kilroy
Retrieval of external firmware has been resolved, and should work with the standard orinoco resume algorithm. This fixes an issue where priv->hw_unavailable indicates the card is ready when firmware has not been loaded. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Cache Symbol firmwareDavid Kilroy
Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26orinoco: Separate fw caching from downloadDavid Kilroy
This refactorring will make it easier to share logic with Symbol firmware. Signed-off by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Handle -ENOMEM on RX gracefullyLuis R. Rodriguez
We would get an oops on RX on -ENOMEM by passing NULL to the hardware on ath_rx_buf_link(). The oops would look something like this: ath_rx_tasklet+0x515/0x53b ath9k_tasklet+0x48 tasklet_action __do_softirq irq_exit do_IRQ RIP: ath_rx_buf_link+0x3a We correct this by handling the requeue directly on the ath_rx_tasklet() and trying to allocate an skb *prior* to sending up the last hardware processed skb. If we run out of memory this gauranteees we have skbs to work with while it simply drops new received frames. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath5k: Clean up eeprom parsing and add missing calibration dataFelix Fietkau
This patch brings the ath5k eeprom parsing code in sync with the work done on ath_info by Nick Kossifidis and integrates the missing parts based on the code of the Atheros Legacy HAL release. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Dont update rate control for every AMPDUVasanthakumar Thiagarajan
Update the rate control only with the tx status of first AMPDU of an aggregation. This patch fixes frequent drops in throughput. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: TX update chicken bitsWinkler, Tomas
This instructs FH to increment the retry count of a packet when it is brought from the memory to TX-FIFO to save transactions during aggregation flow. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: TX setup fix confusion between TX queue and TX DMA channelWinkler, Tomas
This patch configures correctly TX DMA channel. It is not the same as TX queue. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: 4965 define firmware file name onceWinkler, Tomas
Apply same idiom as in 5000 introduced by 'iwlwifi: define firmware file name once' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: enable base band calibration in 5000 HWTomas Winkler
This patch adds base band calibration support. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwlwifi: move iwl_clear_stations_table to iwl-sta.cWinkler, Tomas
This patch moves iwl_clear_stations_table into iwl-sta.c Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26iwl3945 : Fix ad-hoc mode for 3945Abhijeet Kolekar
Patch fixes the ad-hoc mode by 1) Removing redundant clear_stations_table which prevented generation of beacons. 2) Setting assoc_id to 1. It was never set so preventing tx flow in iwl3945_tx_skb. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath5k: set mac address in add_interfaceBob Copeland
Configure the mac address in add_interface and clear it in remove_interface so that users can change the mac address to something other than the one in the eeprom. Also avoid setting it at attach time so that we won't ack packets until fully set up. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use straightforward PCI routines to setup the TX buffer.Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Update TX trigger level on a FIFO underrun.Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Fix bug in deciphering channel flagsSujith
CHANNEL_CCK flag is set for all 2 Ghz channels, so IS_CHAN_CCK() would turn out to be true for all channles in that band. Use IS_CHAN_B() now, which checks the channel mode and not the channel flags. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Move TX completion routine to xmit.cSujith
Also, use a helper function to setup RC status data when processing completed TX descriptors. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use helpersSujith
Break down huge functions, use helper functions or macros instead. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: General code scrubSujith
Replace TRUE/FALSE macros with VALID/INVALID macros. Follow a consistent variable convention. Remove unnecessary comments. Add all RC phy macros into a single enum. Merge functions into reasonably sized entities. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Remove ath9k_rate_tableSujith
Maintaining two sets of rate tables is redundant, remove one and use struct ath_rate_table exclusively. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-26ath9k: Use rate_driver_dataSujith
Remove the hack using vif, and use rate_driver_data within skb->cb to hold driver specific rate information. Setup the rate series in the skb's tx control area and remove all references to ath9k specific rate series ( using struct ath_rc_series ). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 04:07:58 +0000