aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-27const: mark struct vm_struct_operationsAlexey Dobriyan
* mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27ACPI: Kill overly verbose "power state" log messagesRoland Dreier
I was recently lucky enough to get a 64-CPU system, so my kernel log ends up with 64 lines like: ACPI: CPU0 (power states: C1[C1] C2[C3]) This is pretty useless clutter because this info is already available after boot from both /sys/devices/system/cpu/cpu*/cpuidle/state?/ as well as /proc/acpi/processor/CPU*/power. So just delete the code that prints the C-states in processor_idle.c. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-27ACPI: Clarify resource conflict messageJean Delvare
The message "ACPI: Device needs an ACPI driver" is misleading. The device _may_ need an ACPI driver, if the BIOS implemented a custom API for the device in question (which, AFAIK, can't be checked.) If not, then either a generic ACPI driver may be used (for example "thermal"), or nothing can be done (other than a white list). I propose to reword the message to: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver which I think is more correct. Comments and suggestions welcome. I also added a message warning about possible problems and system instability when users pass acpi_enforce_resources=lax, as suggested by Len. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Alan Jenkins <sourcejedi.lkml@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-27thinkpad-acpi: fix CONFIG_THINKPAD_ACPI_HOTKEY_POLL build problemHenrique de Moraes Holschuh
Fix this problem when CONFIG_THINKPAD_ACPI_HOTKEY_POLL is undefined: CHECK drivers/platform/x86/thinkpad_acpi.c drivers/platform/x86/thinkpad_acpi.c:1968:21: error: not an lvalue CC [M] drivers/platform/x86/thinkpad_acpi.o drivers/platform/x86/thinkpad_acpi.c: In function 'tpacpi_hotkey_driver_mask_set': drivers/platform/x86/thinkpad_acpi.c:1968: error: lvalue required as left operand of assignment Reported-by: Noah Dain <noahdain@gmail.com> Reported-by: Audrius Kazukauskas <audrius@neutrino.lt> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-26Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: move leds-clevo-mail's probe function to .devinit.text leds: Fix indentation in LEDS_LP3944 Kconfig entry leds: Fix LED names leds: Fix leds-pca9532 whitespace issues leds: fix coding style in worker thread code for ledtrig-gpio. leds: gpio-leds: fix typographics fault leds: Add WM831x status LED driver
2009-09-26Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: new driver for ADP5520/ADP5501 MFD PMICs backlight: extend event support to also support poll() backlight/eeepc-laptop: Update the backlight state when we change brightness backlight/acpi: Update the backlight state when we change brightness backlight: Allow drivers to update the core, and generate events on changes backlight: switch to da903x driver to dev_pm_ops backlight: Add support for the Avionic Design Xanthos backlight device. backlight: spi driver for LMS283GF05 LCD backlight: move hp680-bl's probe function to .devinit.text backlight: Add support for new Apple machines. backlight: mbp_nvidia_bl: add support for MacBookAir 1,1 backlight: Add WM831x backlight driver Trivial conflicts due to '#ifdef CONFIG_PM' differences in drivers/video/backlight/da903x_bl.c
2009-09-26headers: kref.h reduxAlexey Dobriyan
* remove asm/atomic.h inclusion from kref.h -- not needed, linux/types.h is enough for atomic_t * remove linux/kref.h inclusion from files which do not need it. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-26Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (32 commits) ACPI: i2c-scmi: don't use acpi_device_uid() ACPI: simplify building device HID/CID list ACPI: remove acpi_device_uid() and related stuff ACPI: remove acpi_device.flags.hardware_id ACPI: remove acpi_device.flags.compatible_ids ACPI: maintain a single list of _HID and _CID IDs ACPI: make sure every acpi_device has an ID ACPI: use acpi_device_hid() when possible ACPI: fix synthetic HID for \_SB_ ACPI: handle re-enumeration, when acpi_devices might already exist ACPI: factor out device type and status checking ACPI: add acpi_bus_get_status_handle() ACPI: use acpi_walk_namespace() to enumerate devices ACPI: identify device tree root by null parent pointer, not ACPI_BUS_TYPE ACPI: enumerate namespace before adding functional fixed hardware devices ACPI: convert acpi_bus_scan() to operate on an acpi_handle ACPI: add acpi_bus_get_parent() and remove "parent" arguments ACPI: remove unnecessary argument checking ACPI: remove redundant "type" arguments ACPI: remove acpi_device_set_context() "type" argument ...
2009-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: at91_can: Forgotten git 'add' of at91_can.c TI Davinci EMAC: Fix in vector definition for EMAC_VERSION_2 ax25: Fix ax25_cb refcounting in ax25_ctl_ioctl virtio_net: Check for room in the vq before adding buffer virtio_net: avoid (most) NETDEV_TX_BUSY by stopping queue early. virtio_net: formalize skb_vnet_hdr virtio_net: don't free buffers in xmit ring virtio_net: return NETDEV_TX_BUSY instead of queueing an extra skb. virtio_net: skb_orphan() and nf_reset() in xmit path.
2009-09-26backlight: new driver for ADP5520/ADP5501 MFD PMICsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-26backlight: extend event support to also support poll()Henrique de Moraes Holschuh
Extend the backlight event support to also allow the use of poll()/select() on actual_brightness. We already have the entire event hookup anyway, adding a single function call in one line to get functionality like that is a really good deal. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-26ACPI: i2c-scmi: don't use acpi_device_uid()Bjorn Helgaas
We recently removed the acpi_device_uid() interface because nobody used it. I don't think it's essential here either. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-26Merge branch 'thinkpad-2.6.32-part2' into releaseLen Brown
2009-09-25at91_can: Forgotten git 'add' of at91_can.cDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25TI Davinci EMAC: Fix in vector definition for EMAC_VERSION_2Sriram
In the emac_poll function when looking for interrupt status masks correct definition must be chosen based on EMAC_VERSION(the bit mask has changed from version 1 to version 2). Signed-off-by: Sriram <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-25ACPI: simplify building device HID/CID listBjorn Helgaas
Minor code cleanup, no functional change. Instead of remembering what HIDs & CIDs to add later, just add them immediately. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove acpi_device_uid() and related stuffBjorn Helgaas
Nobody uses acpi_device_uid(), so this patch removes it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove acpi_device.flags.hardware_idBjorn Helgaas
Every acpi_device has at least one ID (if there's no _HID or _CID, we give it a synthetic or default ID). So there's no longer a need to check whether an ID exists; we can just use it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove acpi_device.flags.compatible_idsBjorn Helgaas
We now keep a single list of IDs that includes both the _HID and any _CIDs. We no longer need to keep track of whether the device has a _CID. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: maintain a single list of _HID and _CID IDsBjorn Helgaas
There's no need to treat _HID and _CID differently. Keeping them in a single list makes code that uses the IDs a little simpler because it can just traverse the list rather than checking "do we have a HID?", "do we have any CIDs?" Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: make sure every acpi_device has an IDBjorn Helgaas
This makes sure every acpi_device has at least one ID. If we build an acpi_device for a namespace node with no _HID or _CID, we sometimes synthesize an ID like "LNXCPU" or "LNXVIDEO". If we don't even have that, give it a default "device" ID. Note that this means things like: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/HWP0001:00/HWP0002:04/device:00 (a PCI slot SxFy device) will have "hid" and "modprobe" entries, where they didn't before. These aren't very useful (a HID of "device" doesn't tell you what *kind* of device it is, so it doesn't help find a driver), but I don't think they're harmful. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: use acpi_device_hid() when possibleBjorn Helgaas
Use acpi_device_hid() rather than accessing acpi_device.pnp.hardware_id directly. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: fix synthetic HID for \_SB_Bjorn Helgaas
This makes \_SB_ show up as /sys/devices/LNXSYSTM:00/LNXSYBUS:00 rather than "device:00". This has been broken for a loooong time (at least since 2.6.13) because device->parent is an acpi_device pointer, not a handle. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: handle re-enumeration, when acpi_devices might already existBjorn Helgaas
acpi_bus_scan() traverses the namespace to enumerate devices and uses acpi_add_single_object() to create acpi_devices. When the platform notifies us of a hot-plug event, we need to traverse part of the namespace again to figure out what appeared or disappeared. (We don't yet call acpi_bus_scan() during hot-plug, but I plan to do that in the future.) This patch makes acpi_add_single_object() notice when we already have an acpi_device, so we don't need to make a new one. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: factor out device type and status checkingBjorn Helgaas
This patch adds acpi_bus_type_and_status(), which determines the type of the object and whether we want to build an acpi_device for it. If it is acpi_device-worthy, it returns the type and the device's current status. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: add acpi_bus_get_status_handle()Bjorn Helgaas
Add acpi_bus_get_status_handle() so we can get the status of a namespace object before building a struct acpi_device. This removes a use of "device->flags.dynamic_status", a cached indicator of whether _STA exists. It seems simpler and more reliable to just evaluate _STA and catch AE_NOT_FOUND errors. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: use acpi_walk_namespace() to enumerate devicesBjorn Helgaas
acpi_bus_scan() currently walks the namespace manually. This patch changes it to use acpi_walk_namespace() instead. Besides removing some complicated code, this means we take advantage of the namespace locking done by acpi_walk_namespace(). The locking isn't so important at boot-time, but I hope to eventually use this same path to handle hot-addition of devices, when it will be important. Note that acpi_walk_namespace() does not actually visit the starting node first, so we need to do that by hand first. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: identify device tree root by null parent pointer, not ACPI_BUS_TYPEBjorn Helgaas
We can identify the root of the ACPI device tree by the fact that it has no parent. This is simpler than passing around ACPI_BUS_TYPE_SYSTEM and will help remove special treatment of the device tree root. Currently, we add the root by hand with ACPI_BUS_TYPE_SYSTEM. If we traverse the tree treating the root as just another device and use acpi_get_type(), the root shows up as ACPI_TYPE_DEVICE. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: enumerate namespace before adding functional fixed hardware devicesBjorn Helgaas
This patch changes the order so we enumerate in the "root, namespace, functional fixed" order instead of the "root, functional fixed, namespace" order. When I change acpi_bus_scan() to use acpi_walk_namespace(), it will use the former order, so this patch isolates the order change for bisectability. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: convert acpi_bus_scan() to operate on an acpi_handleBjorn Helgaas
This patch changes acpi_bus_scan() to take an acpi_handle rather than an acpi_device pointer. I plan to use acpi_bus_scan() in the hotplug path, and I'd rather not assume that notifications only go to nodes that already have acpi_devices. This will also help remove the special case for adding the root node. We currently add the root by hand before acpi_bus_scan(), but using a handle here means we can start the acpi_bus_scan() directly with the root even though it doesn't have an acpi_device yet. Note that acpi_bus_scan() currently adds and/or starts the *children* of its device argument. It doesn't do anything with the device itself. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: add acpi_bus_get_parent() and remove "parent" argumentsBjorn Helgaas
This patch adds acpi_bus_get_parent(), which ascends the namespace until it finds a parent with an acpi_device. Then we use acpi_bus_get_parent() in acpi_add_single_object(), so callers don't have to figure out or keep track of the parent acpi_device. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove unnecessary argument checkingBjorn Helgaas
acpi_add_single_object() is static, and all callers supply a valid "child" argument, so we don't need to check it. This patch also remove some unnecessary initializations. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove redundant "type" argumentsBjorn Helgaas
We now save the ACPI bus "device_type" in the acpi_device structure, so we don't need to pass it around explicitly anymore. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove acpi_device_set_context() "type" argumentBjorn Helgaas
We only pass the "type" to acpi_device_set_context() so we know whether the device has a handle to which we can attach the acpi_device pointer. But it's safer to just check for the handle directly, since it's in the acpi_device already. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: use device_type rather than comparing HIDBjorn Helgaas
Check the acpi_device device_type rather than the HID. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: save device_type in acpi_deviceBjorn Helgaas
Most uses of the ACPI bus device_type (ACPI_BUS_TYPE_DEVICE, ACPI_BUS_TYPE_POWER, etc) are during device initialization, but we do need it later for notify handler installation, since that is different for fixed hardware devices vs. namespace devices. This patch saves the device_type in the acpi_device structure, so we can check that rather than comparing against the _HID string. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove redundant "handle" and "parent" argumentsBjorn Helgaas
In several cases, functions take handle and parent device pointers in addition to acpi_device pointers. But the acpi_device structure contains both the handle and the parent pointer, so it's pointless and error-prone to pass them all. This patch removes the unnecessary "handle" and "parent" arguments. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: remove unused acpi_bus_scan_fixed() argumentBjorn Helgaas
We never use the "root" argument, so just remove it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPI: add debug for device additionBjorn Helgaas
Add debug output for adding an ACPI device. Enable this with "acpi.debug_layer=0x00010000" (ACPI_BUS_COMPONENT). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25ACPICA: fixup after acpi_get_object_info() changeBjorn Helgaas
Commit 15b8dd53f5ffa changed info->hardware_id from a static array to a pointer. If hardware_id is non-NULL, it points to a NULL-terminated string, so we don't need to terminate it explicitly. However, it may be NULL; in that case, we *can't* add a NULL terminator. This causes a NULL pointer dereference oops for devices without _HID. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Lin Ming <ming.m.lin@intel.com> CC: Bob Moore <robert.moore@intel.com> CC: Gary Hade <garyhade@us.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-09-25Merge branch 'master' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-davem
2009-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh_mobile_ceu_camera: fix compile breakage, caused by a bad merge sh: Add support DMA Engine to SH7780 sh: Add support DMA Engine to SH7722 sh: enable onenand support in kfr2r09 defconfig. sh: update defconfigs. sh: add FSI driver support for ms7724se sh: Fix up uninitialized variable use caught by gcc 4.4. sh: Handle unaligned 16-bit instructions on SH-2A. sh: mach-ecovec24: Add active low setting for sh_eth sh: includecheck fix: dwarf.c
2009-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] Add support for the Avionic Design Xanthos watchdog timer.
2009-09-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits) genetlink: fix netns vs. netlink table locking (2) 3c59x: Get rid of "Trying to free already-free IRQ" tunnel: eliminate recursion field ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2 net: fix htmldocs sunrpc, clnt.c Phonet: error on broadcast sending (unimplemented) Phonet: fix race for port number in concurrent bind() pktgen: better scheduler friendliness pktgen: T_TERMINATE flag is unused ipv4: check optlen for IP_MULTICAST_IF option ath9k: Initialize txgain and rxgain for newer AR9287 chipsets. iwlagn: fix panic in iwl{5000,4965}_rx_reply_tx ath9k: Fix RFKILL bugs drivers/net/wireless: Use usb_endpoint_dir_out cfg80211: don't overwrite privacy setting wl12xx: fix kconfig/link errors rt2x00: fix the definition of rt2x00crypto_rx_insert_iv iwlwifi: reduce noise when skb allocation fails iwlwifi: do not send sync command while holding spinlock mac80211: fix DTIM setting ...
2009-09-25[WATCHDOG] Add support for the Avionic Design Xanthos watchdog timer.Thierry Reding
This patch adds support for the watchdog timer on Avionic Design Xanthos boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-25sh_mobile_ceu_camera: fix compile breakage, caused by a bad mergeGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-24Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: Fix build of cpm_uart due to core changes powerpc/8xx: Fix regression introduced by cache coherency rewrite powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx powerpc/mm: Fix 40x and 8xx vs. _PAGE_SPECIAL powerpc: Cleanup linker script using new linker script macros. powerpc: Fix ibm,client-architecture-support printout powerpc: Increase NODES_SHIFT on 64bit from 4 to 8 powerpc/perf_counter: Fix vdso detection powerpc: Move 64bit heap above 1TB on machines with 1TB segments powerpc: Change archdata dma_data to a union powerpc: Rename get_dma_direct_offset get_dma_offset powerpc/mm: Remove duplicated #include powerpc/book3e-64: Remove duplicated #include powerpc: Check for unsupported relocs when using CONFIG_RELOCATABLE powerpc/pmc: Don't access lppaca on Book3E powerpc: kmalloc failure ignored in vio_build_iommu_table() hvc_console: Provide (un)locked version for hvc_resize()
2009-09-24Merge branch 'for-linus' of git://repo.or.cz/cris-mirrorLinus Torvalds
* 'for-linus' of git://repo.or.cz/cris-mirror: CRIS: Cleanup linker script using new linker script macros. ARRAY_SIZE changes CRIS: convert to asm-generic/hardirq.h CRISv10: Don't autonegotiate if autonegotiation is off CRIS: fix defconfig build failure CRIS: add pgprot_noncached
2009-09-24Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (103 commits) ARM: 5719/1: [AT91] Fix AC97 breakage ARM: 5721/1: MMCI enable the use of a regulator ARM: 5720/1: Move MMCI header to amba include dir ARM: 5718/1: Sane busids for RealView board components ARM: 5715/1: Make kprobes unregistration SMP safe ARM: 5711/1: locomo.c: CodingStyle cleanups ARM: 5710/1: at91: add AC97 support to at91sam9rl and at91sam9rlek board ARM: 5709/1: at91: add AC97 support to at91sam9g45 series and at91sam9m10g45ek board ARM: 5621/1: at91/dmaengine: integration of at_hdmac driver in at91sam9g45 series ARM: 5620/1: at91/dmaengine: integration of at_hdmac driver in at91sam9rl ARM: Add support for checking access permissions on prefetch aborts ARM: Separate out access error checking ARM: Ensure correct might_sleep() check in pagefault path ARM: Update page fault handling for new OOM techniques ARM: Provide definitions and helpers for decoding the FSR register ARM: 5712/1: SA1100: initialise spinlock in DMA code ARM: s3c: fix check of index into s3c_gpios[] ARM: spitz: fix touchscreen max presure ARM: STMP3xxx: deallocation with negative index of descriptors[] Thumb-2: Correctly handle undefined instructions in the kernel ...
2009-09-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Don't turn on carrier for a non-active port IB/mthca: Fix access to freed memory in catastrophic event handling mlx4_core: Pass cache line size to device FW RDMA/nes: Remove duplicate .ndo_set_mac_address field initialization IB/mad: Fix lock-lock-timer deadlock in RMPP code