aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-10-14UBI: don't use array index before testing if it is negativeJesper Juhl
I can't find anything guaranteeing that 'ubi_num' cannot be <0 in drivers/mtd/ubi/kapi.c::ubi_open_volume(), and in fact the code even tests for that and errors out if so. Unfortunately the test for "ubi_num < 0" happens after we've already used 'ubi_num' as an array index - bad thing to do if it is negative. This patch moves the test earlier in the function and then moves the indexing using that variable after the check. A bit safer :-) Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14UBI: add more printsArtem Bityutskiy
I hit those situations and found out lack of print messages. Add more prints when erase problems occur. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14UBI: fix sparse warningsArtem Bityutskiy
Fix "symbol shadows an earlier one" warnings. Although they are harmless but it does not hurt to fix them and make sparse happy. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14UBI: fix leak in ubi_scan_erase_pebFlorin Malita
Coverity (1769) found the following problem: if the erase counter overflow check triggers, ec_hdr is leaked. Moving the allocation after the overflow check should take care of it. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-09sata_mv: correct S/G table limitsJeff Garzik
The recent mv_fill_sg() rewrite, to fix a data corruption problem related to IOMMU virtual merging, forgot to account for the potentially-increased size of the scatter/gather table after its run. Additionally, the DMA boundary is reduced from 0xffffffff to 0xffff to more closely match the needs of mv_fill_sg(). Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08Correct Makefile rule for generating custom keymapMaarten Bressers
When building a custom keymap, after setting GENERATE_KEYMAP := 1 in drivers/char/Makefile, the kernel build fails like this: CC drivers/char/vt.o make[2]: *** No rule to make target `drivers/char/%.map', needed by `drivers/char/defkeymap.c'. Stop. make[1]: *** [drivers/char] Error 2 make: *** [drivers] Error 2 This was caused by commit af8b128719f5248e542036ea994610a29d0642a6, which deleted a necessary colon from the Makefile rule that generates the keymap, since that rule contains both a target and a target-pattern. The following patch puts the colon back: Signed-off-by: Maarten Bressers <mbres@gentoo.org> Cc: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-08ISDN: Fix data access out of array boundsKarsten Keil
Fix against access random data bytes outside the dev->chanmap array. Thanks to Oliver Neukum for pointing me to this issue. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Driver core: fix SYSF_DEPRECATED breakage for nested classdevsDmitry Torokhov
We should only reparent to a class former class devices that form the base of class hierarchy. Nested devices should still grow from their real parents. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Tested-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: point to migration document
2007-10-07Add manufacturer and card id of teltonica pcmcia modemsAttila Kinali
Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c Signed-off-by: Attila Kinali <attila@kinali.ch> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07VT_WAITACTIVE: Avoid returning EINTR when not necessaryLinus Torvalds
We should generally prefer to return ERESTARTNOHAND rather than EINTR, so that processes with unhandled signals that get ignored don't return EINTR. This can help with X startup issues: Fatal server error: xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call although the real fix is having the X server always retry EINTR regardless (since EINTR does happen for signals that have handlers installed). Keithp has a patch for that. Regardless, ERESTARTNOHAND is the correct thing to use. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07firewire: point to migration documentStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-06Revert "intel_agp: fix stolen mem range on G33"Kyle McMartin
This reverts commit f443675affe3f16dd428e46f0f7fd3f4d703eeab, which breaks horribly if you aren't running an unreleased xf86-video-intel driver out of git. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Cc: Dave Airlie <airlied@linux.ie> Cc: Zhenyu Wang <zhenyu.z.wang@intel.com> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-06Fix non-terminated PCI match table in PowerMac IDEBenjamin Herrenschmidt
The PCI device table in the powermac IDE driver isn't properly terminated. Depending on how your kernel is linked and other random factors, you can end up with this driver matched against any other PCI device in your system, possibly crashing at boot. Thanks to Heikki for tracking this down with me, the bug have been there for some time, though it rarely hurts due to luck. In this case, the switch from .22 to .23-rc9 is causing it to show up due to differences in the resulting layout of .data I suppose. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <pmac@au1.ibm.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Heikki Lindholm <holindho@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-05r8169: revert part of 6dccd16b7c2703e8bbf8bca62b5cf248332afbe2Francois Romieu
The 8169/8110SC currently announces itself as: [...] eth0: RTL8169sc/8110sc at 0x........, ..:..:..:..:..:.., XID 18000000 IRQ .. ^^^^^^^^ It uses RTL_GIGA_MAC_VER_05 and this part of the changeset can cut its performance by a factor of 2~2.5 as reported by Timo. (the driver includes code just before the hunk to write the ChipCmd register when mac_version == RTL_GIGA_MAC_VER_0[1-4]) Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Timo Jantunen <jeti@welho.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-04[SCSI] megaraid_old: fix READ_CAPACITYFUJITA Tomonori
The bulk transfer mode got eleminated by 3f6270ef76f2ce5c134615a470685d6c2a66c07e. Unfortunately, this mode is required for READ_CAPACITY commands on certain cards, so put it back again. This fixes a boot failure regression reported by Burton Windle. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-03Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: drivers/ata/pata_ixp4xx_cf.c: ioremap return code check Ata: pata_marvell, use ioread* for iomap-ped memory libata: fix for sata_mv >64KB DMA segments
2007-10-03drivers/ata/pata_ixp4xx_cf.c: ioremap return code checkScott Thompson
Add missing ioremap return checks. Signed-off-by: Scott Thompson <postfail <at> hushmail.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-03Ata: pata_marvell, use ioread* for iomap-ped memoryJiri Slaby
pata_marvell, use ioread* for iomap-ped memory read* on pci_iomapped memory is incorrect, fix it Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-03libata: fix for sata_mv >64KB DMA segmentsOlof Johansson
Fix bug in sata_mv for cases where the IOMMU layer has merged SG entries to larger than 64KB. They need to be split up before being sent to the driver. Just for simplicity's sake, split up at 64K boundary instead of 64K size, since that's what the common code does anyway. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-03sky2: jumbo frame regression fixStephen Hemminger
Remove unneeded check that caused problems with jumbo frame sizes. The check was recently added and is wrong. When using jumbo frames the sky2 driver does fragmentation, so rx_data_size is less than mtu. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-03Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-10-02[PATCH] bcm43xx: Correct printk with PFX before KERN_Joe Perches
Correct printk with PFX before KERN_ in bcm43xx_wx.c Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-02Merge branch 'sas-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'sas-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: aic94xx: fix DMA data direction for SMP requests
2007-10-02Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: dm9601: Fix receive MTU mv643xx_eth: Do not modify struct netdev tx_queue_len qla3xxx: bugfix: Fix VLAN rx completion handling. qla3xxx: bugfix: Add memory barrier before accessing rx completion.
2007-10-02Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: add another TECRA M3 entry to broken suspend list
2007-10-02aic94xx: fix DMA data direction for SMP requestsJeff Garzik
DMA-mapped SMP (scsi management protocol) requests going /to/ the device need the PCI DMA data direction to indicate such. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-02dm9601: Fix receive MTUPeter Korsgaard
dm9601 didn't take the ethernet header into account when calculating RX MTU, causing packets bigger than 1486 to fail. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02mv643xx_eth: Do not modify struct netdev tx_queue_lenDale Farnsworth
This driver erroneously zeros dev->tx_queue_len, since mp->tx_ring_size has not yet been initialized. Actually, the driver shouldn't modify tx_queue_len at all and should leave the value set by alloc_etherdev(), currently 1000. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02qla3xxx: bugfix: Fix VLAN rx completion handling.Ron Mercer
Fix 4032 chip undocumented "feature" where bit-8 is set if the inbound completion is for a VLAN. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02qla3xxx: bugfix: Add memory barrier before accessing rx completion.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-02ata_piix: add another TECRA M3 entry to broken suspend listTejun Heo
There's a different version of DMI table for TECRA M3 where it has proper vendor and product name entry. Add the entry to the broken suspend list. Angus Turnbull reported and provided initial patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Angus Turnbull <angus@twinhelix.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-01[TCP]: secure_tcp_sequence_number() should not use a too fast clockEric Dumazet
TCP V4 sequence numbers are 32bits, and RFC 793 assumed a 250 KHz clock. In order to follow network speed increase, we can use a faster clock, but we should limit this clock so that the delay between two rollovers is greater than MSL (TCP Maximum Segment Lifetime : 2 minutes) Choosing a 64 nsec clock should be OK, since the rollovers occur every 274 seconds. Problem spotted by Denys Fedoryshchenko [ This bug was introduced by f85958151900f9d30fa5ff941b0ce71eaa45a7de ] Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-01Merge branch 'fixes-jgarzik' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 * 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6: [PATCH] libertas: build problems when partially modular
2007-10-01Merge branch 'master' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6052): ivtv: fix udma yuv bug
2007-10-01VT ioctl race fixSamuel Ortiz
When calling the RELDISP VT ioctl, we are reading vt_newvt while the console workqueue could be messing with it (through change_console()). We fix this race by taking the console semaphore before reading vt_newvt. Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-30[PATCH] libertas: build problems when partially modularRandy Dunlap
Fix missing symbols in libertas USB driver when it is modular and rest of libertas is built-in. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-30V4L/DVB (6052): ivtv: fix udma yuv bugIan Armstrong
Using udma yuv causes the driver becomes locked into that mode. This prevents use of the mpeg decoder & non-udma yuv output. This patch clears the operating mode when the device is closed. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-29fix console change race exposed by CFSJan Lübbe
The new behaviour of CFS exposes a race which occurs if a switch is requested when vt_mode.mode is VT_PROCESS. The process with vc->vt_pid is signaled before vc->vt_newvt is set. This causes the switch to fail when triggered by the monitoing process because the target is still -1. [ If the signal sending fails, the subsequent "reset_vc(vc)" will then reset vt_newvt to -1, so this works for that case too. - Linus ] Signed-off-by: Jan Lübbe <jluebbe@lasnet.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-29mv643xx_eth: Check ETH_INT_CAUSE_STATE bitDale Farnsworth
Commit 468d09f8946d40228c56de26fe4874b2f98067ed masked the "state" interrupt (bit 20 of the cause register). This results in Radstone's PPC7D repeatedly re-entering the interrupt routine, locking up the board. The following patch returns the required handling for this interrupt. Signed-off-by: Martyn Welch <martyn.welch@radstone.co.uk> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-28Fix bogus PCI quirk for e100Benjamin Herrenschmidt
Linas reported me that some machines were crashing at boot in quirk_e100_interrupt. It appears that this quirk is doing an ioremap directly on a PCI BAR value, which isn't legal and will cause all sorts of bad things to happen on architectures where PCI BARs don't directly match processor bus addresses. This fixes it by using the proper PCI resources instead which is possible since the quirk has been moved by a previous commit to happen late enough for that. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-28Input: xpad - fix dependancy on LEDS classDmitry Torokhov
Input: xpad - fix dependancy on LEDS class The driver can not be built-in when LEDS class is a module. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-28Merge branch 'for-2.6.23' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: [POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode. [POWERPC] Fix mpc834x USB-MPH configuration. [POWERPC] Fix cpm_uart driver for cpm1 machines [PPC] Fix cpm_dpram_addr returning phys mem instead of virt mem [POWERPC] Fix copy'n'paste typo in commproc.c
2007-09-28Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: e1000: Add device IDs of blade version of the 82571 quad port sky2: fix transmit state on resume sky2: FE+ vlan workaround sky2: sky2 FE+ receive status workaround
2007-09-28[POWERPC] Fix cpm_uart driver for cpm1 machinesJochen Friedrich
in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp. On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't be used for arithmetric compare operations with virtual addresses returned by cpm_dpram_addr. This patch changes the assignment to use cpm_dpram_addr as well, like in cpm_uart_cpm2.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-27e1000: Add device IDs of blade version of the 82571 quad portAuke Kok
This blade-specific board form factor is identical to the 82571EB board. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27sky2: fix transmit state on resumeStephen Hemminger
This should fix http://bugzilla.kernel.org/show_bug.cgi?id=8667 After resume, driver has reset the chip so the current state of transmit checksum offload state machine and DMA state machine will be undefined. The fix is to set the state so that first Tx will set MSS and offset values. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27sky2: FE+ vlan workaroundStephen Hemminger
The FE+ workaround means the driver can no longer trust the status register to indicate VLAN tagged frames. The fix for this is to just disable VLAN acceleration for that chip version. Tested and works fine. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27sky2: sky2 FE+ receive status workaroundStephen Hemminger
The Yukon FE+ chip appears to have a hardware glitch that causes bogus receive status values to be posted. The data in the packet is good, but the status value is random garbage. As a temporary workaround until the problem is better understood, implement the workaround the vendor driver used of ignoring the status value on this chip. Since this means trusting dodgy hardware values; add additional checking of the receive packet length. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-27i915: make vbl interrupts work properly on i965g/gm hw.Dave Airlie
This code is ported from the DRM git tree and allows the vblank interrupts to function on the i965 hw. It also requires a change in Mesa's 965 driver to actually use them. [ Without this patch, my 965GM drops vblank interrupts - Jesse ] Signed-off-by: Dave Airlie <airlied@linux.ie> Acked-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 06:00:07 +0000