aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-10-10via-velocity: more cleanupStephen Hemminger
Per Al's suggestion, get rid of the stupid stuff: Remove cam_type switch, And deinline things that aren't important for speed. And make big macro and inline. And remove some dead/unused code. And use const char * for chip name. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10via-velocity: use standard VLAN interface (resend)Stephen Hemminger
The via-velocity is using a non-standard VLAN interface configured via module parameters (yuck). Replace with the standard acceleration interface. It solves a number of problems with being able to handle multiple vlans, and dynamically reconfigure. This is compile tested only, don't have this board. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10sb1250-mac: Driver model & phylib updateMaciej W. Rozycki
A driver model and phylib update. It includes the following changes: 1. Removal of unused module options. 2. Phylib support and the resulting removal of generic bits for handling the PHY. 3. Proper reserving of device resources and using ioremap()ped handles to access MAC registers rather than platform-specific macros. 4. Handling of the device using the driver model. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10sb1250-mac.c: De-typedef, de-volatile, de-etc...Maciej W. Rozycki
Remove typedefs, volatiles and convert kmalloc()/memset() pairs to kcalloc(). Also reformat the surrounding clutter. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[netdrvr] sundance: fix phy scanning on IP100AJeff Garzik
Based on a based from Jesse Huang <jesse@icplus.com.tw>. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10e1000e: Do not allow requeue of freed skbKrishna Kumar
Returning BUSY will make qdisc_restart enqueue the skb which was already freed. The bad skb was correctly freed and we should return NETDEV_TX_OK. First spotted by Jeff Garzik on 08/13/07. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10Clean up redundant PHY write line for ULi526x Ethernet driverRoy Zang
Clean up redundant PHY write line for ULi526x Ethernet Driver. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10dgrs: remove from build, config, and maintainer listNathanael Nerode
Stop building and configuring driver for Digi RightSwitch, which was never actually sold to anyone, and remove it from MAINTAINERS. In response to an investigation into the firmware of the "Digi Rightswitch" driver, Andres Salomon discovered: > > Dear Andres: > > After further research, we found that this product was killed in place > and never reached the market. We would like to request that this not be > included. Since the product never reached market, clearly nobody is using this orphaned driver. Signed-off-by: Nathanael Nerode <neroden@gcc.gnu.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: pass in count of buffers to replenish rx ring withOlof Johansson
pasemi_mac: pass in count of buffers to replenish rx ring with Refactor replenish_rx_ring to take an argument for how many entries to fill. Since it's normally available from where it's called anyway, this is just simpler. It also removes the awkward logic to try to figure out if we're filling for the first time or not. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: don't enable rx before there are buffers on the ringOlof Johansson
pasemi_mac: don't enable rx before there are buffers on the ring Reorder initialization of the DMA channels and the interface. Before there was a time window when the interface was enabled before DMA was enabled. Also, now there will always be RX buffers available at the time the MAC interface is enabled, to avoid temporary out-of-buffer errors for the very first packets (on busy networks). Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: flags as passed to spin_*_irqsave() should be unsigned longOlof Johansson
pasemi_mac: flags as passed to spin_*_irqsave() should be unsigned long. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: set interface speed correctly on XAUI portsOlof Johansson
pasemi_mac: set interface speed correctly on XAUI ports Set interface speed for XAUI to 10G per default, not 1G. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[IPoIB]: Convert to netdevice internal statsRoland Dreier
Use the stats member of struct netdevice in IPoIB, so we can save memory by deleting the stats member of struct ipoib_dev_priv, and save code by deleting ipoib_get_stats(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Bring comments in loopback.c uptodate.Eric W. Biederman
A hint as to why it is safe to use per cpu variables, and note that we actually can have multiple instances of the loopback device now. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[PATCH] iwlwifi: fix imcomplete conversion to print_mac APIJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: Update iwlwifi version stamp to 1.1.17Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: add debugfs rate scale statsZhu Yi
This patch adds rates scale statistics to debugfs: $ cat /sys/kernel/debug/ieee80211/phy<X>/stations/<mac>/rate_stats_table Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: set fixed rate through debugfsZhu Yi
This patch adds fixed rate setting through debugfs $ echo <rate_n_flags> > \ /sys/kernel/debug/ieee80211/phy<X>/stations/<mac>/rate_scale_table Currently there is no way to turn to rate scaling working again. Will be fixed in later. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: rs_rate_scale_perform clean upZhu Yi
This patch cleans up rs_rate_scale_perform function. It removes dead code, shortens variable names and removes useless return i.e. function now returns void. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: add supp_rates to rate scale sta private dataZhu Yi
This patch adds supp_rate bit mask to rate scale sta private data structre and thus removes sta from the argument list in helper functions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: limit printouts on hot pathZhu Yi
This patch change printouts on TX path to the net_ratelimit version. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: add read rate scale table debugfs functionZhu Yi
This patch adds read rate scale table debugfs function for 4965 rate scaling module. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: add debugfs framework to rate scaleZhu Yi
This patch adds debugfs handler to rate scale algorithms. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: removing unnecessary memset in 4965 rate scaleZhu Yi
This patch removes redundant memset in rate scale. In rs_alloc_sta, kzalloc is used so the memset can be avoided. In rs_rate_init, it is a bug fix since it overrides everything set in other handlers namely add_debugfs. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: fix add_station to avoid FW errorZhu Yi
There were a few Firmware errors reported the most reproducible http://bughost.org/bugzilla/show_bug.cgi?id=1471 The root cause is rate_n_flags isn't set anymore. This patch fixes the problem. Signed-off-by: Ian Schram <ischram@telenet.be> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: Fix typo in rate sacling algorithmZhu Yi
This patch fixes tiny typo in 4965 rate sacling algorithm Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: clear station table in rxon unconditionallyZhu Yi
This patch clears stations table for every rxon command. It removes iwl_rxon_add_station function in 3945. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: Correction for sending beacon in config_apZhu Yi
This patch takes out sending beacon from conditional in config_ap function. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: workaournd REPLY_COMPRESSED_BA command in iwl_rx_handleZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] iwlwifi: replacing IPW with IWL in error messagesZhu Yi
This patch repaces IPW with IWL in error messages. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] adm8211: Detect interface up/down in suspend/resume hooks correctlyMichael Wu
Interface up/down detection was incorrectly changed during the filter API update. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] adm8211: Pass all TXed frames to tx_status_irqsafeMichael Wu
ieee80211_tx_status_irqsafe can handle the freeing of all TXed frames. Also, set excessive_retries for failed frames. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] adm8211: Use revision from pci_devMichael Wu
No need to load the revision ourselves anymore. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] adm8211: kill version printksMichael Wu
No need to pollute dmesg with copyright info. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] adm8211: Improve writing of mac addrs to registersMichael Wu
The mac address write is broken for big endian and the bssid write can be simplified. This patch does both. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] adm8211: kill interrupt loopMichael Wu
Looping in the interrupt handler is unnecessary. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Release rt2x00 2.0.9Ivo van Doorn
Version bump Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Fix panic on rmmod with rfkill enabledIvo van Doorn
When ieee80211_hw.config indicates that the radio is enabled and is configuring options that require the link tuner to be restarted the link tuner will cause a kernel panic when rfkill has indicated the radio was in fact disabled. Signed-off-by: Modestas Vainius <modestas@vainius.eu> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Fix obvious typo in commentIvo van Doorn
Signed-off-by: Modestas Vainius <modestas@vainius.eu> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Stop link tuning when radio is downIvo van Doorn
As pointed out by Modestas Vainius the link tuner could continue working while the radio is already down. This because at the start of disable_radio the ENABLED_RADIO flag is cleared and causes the toggle_rx to skip the stop_link_tuner() call. This will add a check to the start of the link tuner which will automatically stop the link tuner when the radio is disabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: make rt2x00lib_stop_link_tuner() reentrant with link_tuner workIvo van Doorn
Calling cancel_delayed_work_sync() unconditionally won't hurt and it will avoid race conditions when another CPU is already executing link_tuner work. Signed-off-by: Modestas Vainius <modestas@vainius.eu> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10rt2x00: Add rt2x00dev->flags to debugfsIvo van Doorn
Loosely based on the patch by Matthijs Kooijman, this will add the dev_flags entry into debugfs which will display rt2x00dev->flags. This will allow easier debugging of flag handling. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Reorganize rt2x00dev->flagsIvo van Doorn
The rt2x00dev->flags has become a chaos over time, this will reorganize the flags by renaming, deleting, adding and properly implement the flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Correctly identify rt2561turboIvo van Doorn
Apparently rt2561s actually has PCI ID 0x0301 and rt2561 actually has PCI ID 0x0302. Where rt2561s supports Turbo. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Increase rt2x00usb_vendor_request timeout.Ivo van Doorn
By increasing the timeout for rt2x00usb_vendor_request, we should limit the number of loops required to send a signal to the device succefully. 500ms timeout is specified by the Ralink legacy drivers for rt2500usb. For rt73usb 1000ms is specified, but that includes the timeout for the firmware which is already specified in a different define. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Make *_beacon_update staticIvo van Doorn
Make rt61pci_beacon_update and rt73usb_beacon_update static, they are only used inside their own source file and then only for setting it as callback funtion for mac80211. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] rt2x00: Correct error in calculating rssi for link tunerIvo van Doorn
The call to rt2x00lib_precalculate_link_signal resets link.rx_success which is needed when calculating the average rssi for the link tuner. Change the call order so the link tuner runs first as it doesn't need the result of the precalculate. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: remove crypto algorithm typedefJohannes Berg
The typedef is not required, we can just use "enum ieee80211_key_alg" instead of "ieee80211_key_alg" Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] mac80211: revamp interface and filter configurationJohannes Berg
Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[NET]: Proper comment for loopback initialization order.Denis V. Lunev
Loopback device is special. It should be initialized at the very beginning. Initialization order has been changed by Eric W. Biederman <ebiederm@xmission.com> and this change is non-obvious and important enough to add proper comment. Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 19:35:32 +0000