aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-10-10[PATCH] ipw2200: batch non-user-requested scan result notificationsDan Williams
ipw2200 makes extensive use of background scanning when unassociated or down. Unfortunately, the firmware sends scan completed events many times per second, which the driver pushes directly up to userspace. This needlessly wakes up processes listening for wireless events many times per second. Batch together scan completed events for non-user-requested scans and send them up to userspace every 4 seconds. Scan completed events resulting from an SIOCSIWSCAN call are pushed up without delay. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] Add Linksys card to HostAP driverMarcin Juszkiewicz
Socket 1: product info: "The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P", "RevA" manfid: 0x0274, 0x3301 Signed-off-by: Marcin Juszkiewicz <openembedded@haerwu.biz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] zd1211rw: Add ID for TalkTalk SNU5630NS/05Daniel Drake
Tested by Su-Jong You zd1211b chip 0471:1237 v4810 high 00-12-bf AL2230_RF pa0 g--N Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[PATCH] hostap_cs: Add device ID for Telekom T-Sinus 111cardStefan Lippers-Hollmann
This adds the PCMCIA device ID for the Deutsche Telekom T-Sinus 111card to hostap_cs. $ /sbin/lspcmcia -v [...] Socket 0 Device 0: [hostap_cs] (bus ID: 0.0) Configuration: state: on Product Name: T-Sinus 111card 2.0.0 Identification: manf_id: 0x01bf card_id: 0x3301 function: 6 (network) prod_id(1): "T-Sinus" (0x8c389dc1) prod_id(2): "111card" (0x6a23ac17) prod_id(3): --- (---) prod_id(4): "2.0.0" (0x92b9effb) Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[NETNS]: Move some code into __init section when CONFIG_NET_NS=nPavel Emelyanov
With the net namespaces many code leaved the __init section, thus making the kernel occupy more memory than it did before. Since we have a config option that prohibits the namespace creation, the functions that initialize/finalize some netns stuff are simply not needed and can be freed after the boot. Currently, this is almost not noticeable, since few calls are no longer in __init, but when the namespaces will be merged it will be possible to free more code. I propose to use the __net_init, __net_exit and __net_initdata "attributes" for functions/variables that are not used if the CONFIG_NET_NS is not set to save more space in memory. The exiting functions cannot just reside in the __exit section, as noticed by David, since the init section will have references on it and the compilation will fail due to modpost checks. These references can exist, since the init namespace never dies and the exit callbacks are never called. So I introduce the __exit_refok attribute just like it is already done with the __init_refok. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[ISDN]: Change I4L to use alloc_netdev().Karsten Keil
Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[TG3]: Fix ethtool autonegotiate flags.Andy Gospodarek
I recently noticed that when calling: # ethtool -s eth0 autoneg on on a 5722 (though I'm sure it's not specific to that card) that subsequent checks of the cards status looked like this: # ethtool eth0 Settings for eth0: Supported ports: [ MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised auto-negotiation: No <---- This seems odd?!? Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: g Wake-on: d Current message level: 0x000000ff (255) Link detected: yes I noticed that the following commit: commit 3600d918d870456ea8e7bb9d47f327de5c20f3d6 Author: Michael Chan <mchan@broadcom.com> Date: Thu Dec 7 00:21:48 2006 -0800 [TG3]: Allow partial speed advertisement. Honor the advertisement bitmask from ethtool. We used to always advertise the full capability when autoneg was set to on. changed things around so that ethtool speed settings were strictly followed. Unfortunately ethtool doesn't seem to set ADVERTISED_Autoneg in the advertising field (and maybe it shouldn't have to). I'd vote that it should be fixed there, but it should also be added here just in case someone using ethtool ioctls in their own application gets what they want. Adding that flag in tg3_set_settings seemed like the most logical place since the driver works fine on boot. This is just an issue when re-enabling autonegotiation, so we should probably nip it there. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[IRDA]: Oops fix for ksdazzleAlex Villacís Lasso
This fixes a kernel oops triggered by the ksdazzle SIR driver. We need more space for input frames, and 2048 should be plenty of it. Signed-off-by: Alex Villacís Lasso <a_villacis@palosanto.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[TG3]: Update version to 3.82.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[TG3]: Add 5784 and 5764 support.Matt Carlson
This patch adds the support for 5784 and 5764 devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[TG3]: ASIC decoding and basic CPMU support.Matt Carlson
Newer products change the way the ASIC revision is obtained. This patch implements how the driver will extract the revision number. This patch also adds preliminary CPMU support. CPMU stands for Central Power Management Unit. The CPMU's role is to put the chip into lower power states when the operating conditions allow it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[TG3]: Walk PCI capability lists.Matt Carlson
Newer tg3 devices shuffle around the registers in PCI configuration space. This patch changes the way the driver accesses the PCI capabilities registers. Hardcoded register locations are replaced with offsets from pci_find_capability() return values. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10e1000e: Fix ethtool register test codeAuke Kok
A merge/cleanup code accidentally dropped 8254x code in and removed 8257x code here. Undo this mistake and use the pci-e relevant register test similar as to what is in e1000. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10e1000e: fix debugging printout codeAuke Kok
A small bug crawled in the -DDEBUG enabled code. Fix this to properly call the backreference device name. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10qeth: discard inbound packets with unknown header idUrsula Braun
Debugging statements are added for inbound packets with unknown header id. Those packets are discarded and no longer processed as osn-packets. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10lcs: Channel errors drive lcs_recovery which leads to kernel panic.Klaus D. Wacker
When the lcs irq routine detects channel failures it drives device recovery. After this event the device is no longer usable for shutdown requests, because the lcs_irq routine may get wrong channel status information. In such a case the lcs_irq routine marks the channel in 'error' state. The channel state comes back to 'running' after restarting the channels. Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10qeth: avoid duplicate deletion of multicast addressesUrsula Braun
if qeth_set_multicast_list() is performed on 2 CPUs in parallel, card->ip_list may end corrupted. Solution: In function __qeth_delete_all_mc() remove card->ip_list entry before invoking qeth_deregister_addr_entry(). Thus a 2nd invocation of qeth_set_multicast_list() cannot try to remove the same entry twice. Signed-off-by Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10qeth: EDDP does not work on large MTUsFrank Blaschka
Fix filling the qdio buffers in EDDP mode. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10qeth: HiperSockets layer-3 interface drop non IPv4 or non IPv6 packetsKlaus D. Wacker
HiperSockets infrastructure (layer-3 mode) supports only IPv4 or IPv6 packets. Sending other packet types disturbs TCP/IP on z/VM, which issues messages about invalid packets. Qeth send routine will detect packet type on sending over a HiperSockets interface (in layer-3 mode) and drop non IP packets. The error and drop count of the interface is incremented. Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[NIU]: Add Sun Neptune ethernet driver.David S. Miller
With cleanup suggestions and bugs spotted by Stephen Hemminger, Ingo Oeser, Matheos Worku, and Oliver Hartkopp. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10pasemi_mac: enable iommu supportOlof Johansson
pasemi_mac: enable iommu support Enable IOMMU support for pasemi_mac, but avoid using it on non-partitioned systems for performance reasons. The user can override this by selecting the PPC_PASEMI_IOMMU_DMA_FORCE configuration option. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10drivers/net/qla3xxx: trim trailing whitespaceJeff Garzik
Also, hopefully, change the file permissions to 0644. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-10Fix typo in new EMAC driver.vbarshak@ru.mvista.com
Fix an obvious typo in emac_xmit_finish. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ipg.c doesn't compile with with CONFIG_HIGHMEM64Gtrem
I've tried to compile 2.6.23-rc8-mm2, but it fails on ipg.c with the error : ERROR: "__udivdi3" [drivers/net/ipg.ko] undefined! I've instigated a bit, and I've found this code in ipg.c : static void ipg_nic_txfree(struct net_device *dev) { struct ipg_nic_private *sp = netdev_priv(dev); void __iomem *ioaddr = sp->ioaddr; const unsigned int curr = ipg_r32(TFD_LIST_PTR_0) - (sp->txd_map / sizeof(struct ipg_tx)) - 1; unsigned int released, pending; sp->txd_map is an u64 because : dma_addr_t txd_map; And in asm-i386/types.h, I see : #ifdef CONFIG_HIGHMEM64G typedef u64 dma_addr_t; #else typedef u32 dma_addr_t; #endif I my config, I use CONFIG_HIGHMEM64G sizeof(struct ipg_tx) is an u32 So the div failed on i386 because of u64 / u32. [akpm@linux-foundation.org: cleanups] Cc: Sorbica Shieh <sorbica@icplus.com.tw> Cc: Jesse Huang <jesse@icplus.com.tw> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: use buffer index pointer in clean_rx()Olof Johansson
pasemi_mac: use buffer index pointer in clean_rx() Use the new features in B0 for buffer ring index on the receive side. This means we no longer have to search in the ring for where the buffer came from. Also cleanup the RX cleaning side a little, while I was at it. Note: Pre-B0 hardware is no longer supported, and needs a pile of other workarounds that are not being submitted for mainline inclusion. So the fact that this breaks old hardware is not a problem at this time. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: clear out old errors on interface openOlof Johansson
pasemi_mac: clear out old errors on interface open Clear out any pending errors when an interface is brought up. Since the bits are sticky, they might be from interface shutdown time after firmware has used it, etc. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: update todo listOlof Johansson
pasemi_mac: update todo list Remove some stale todo items that have been taken care of. Add a couple of upcoming ones. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: further performance tweaksOlof Johansson
pasemi_mac: further performance tweaks Misc driver tweaks for pasemi_mac: * Increase ring size (really needed mostly on 10G) * Take out an unneeded barrier * Move around a few prefetches and reorder a few calls * Don't try to clean on full tx buffer, just let things take their course and stop the queue directly * Avoid filling on the same line as the interface is working on to reduce cache line bouncing * Avoid unneeded clearing of software state (and make the interface shutdown code handle it) * Fix up some of the tx ring wrap logic. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: add local skb alignmentOlof Johansson
pasemi_mac: add local skb alignment Add local SKB alignment to pasemi_mac, since ppc64 in general has it at 0 because of design flaws in some of the IBM server bridge chips. However, for PWRficient doing the unaligned copies is more expensive than doing unaligned DMA so make sure the data is aligned instead. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: workaround for erratum 5971Olof Johansson
pasemi_mac: workaround for erratum 5971 Implement workarounds for erratum 5971, where L2 hints aren't considered properly unless the way hint is enabled on the interface. Since L2 isn't setup to dedicate a way to headers, we need to reset the packet count by hand so it won't run out of credits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: implement sg supportOlof Johansson
pasemi_mac: implement sg support Implement SG support for pasemi_mac Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: rework ring managementOlof Johansson
pasemi_mac: rework ring management Rework ring management, switching to an opaque ring format instead of the struct-based descriptor+pointer setup, since it will be needed for SG support. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: fix bug in receive buffer dma mappingOlof Johansson
pasemi_mac: fix bug in receive buffer dma mapping skb->len isn't actually set to the size of the allocated skb, so don't try to use it when figuring out how much to map. (This hasn't surfaced as a real bug because we effectively disable translation for the interface, but it still needs fixing for the future) Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10pasemi_mac: basic error checkingOlof Johansson
pasemi_mac: basic error checking Add some rudimentary error checking to pasemi_mac. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10[MAC80211]: remove ALG_NONEJohannes Berg
This "algorithm" is used only internally and is not useful. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Michael Buesch <mb@bu3sch.de> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[MAC80211]: add "invalid" interface typeJohannes Berg
Since I cannot convince the lazy driver authors (hello Michael) to stop (ab)using the MGMT interface type internally in their drivers, this patch introduces a new _INVALID type especially for their use and changes all affected drivers to use it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: Rewrite pwork locking policy.Michael Buesch
Implement much easier and more lightweight locking for the periodic work. This also removes the last big busywait loop and replaces it by a sleeping loop. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: Use input-polldev for the rfkill switchMichael Buesch
This removes the direct call to rfkill on an rfkill event and replaces it with an input device. This way userspace is also notified about the event. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: RF-kill supportMichael Buesch
This adds full support for the RFKILL button and the RFKILL LED trigger. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B43]: LED triggers supportMichael Buesch
Drive the LEDs through the generic LED triggers. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[ZD1211RW]: Removed zd_util.c and zd_util.hUlrich Kunitz
The kernel now provides a generic hexdump implementation should we need it again, so we can remove it from zd1211rw. After removing that, only one single-user function is left in zd_util. Move that to zd_mac and remove zd_util. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[HOSTAP]: set netdev type before registering AP interfaceDaniel Drake
As detailed at https://bugs.gentoo.org/159646 hostap with hostapd confuses udev by presenting 2 interfaces with the same MAC address. Also, at the time of detection, the 'type' attribute is 1, identical to other hostap interfaces. The AP interface is supposed to have type ARPHRD_IEEE80211 (801), but this is not set until after registration. Setting it before register_netdev() is called allows us to avoid this confusion. We can do this by propogating the HOSTAP_INTERFACE type through to hostap_setup_dev(). Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[BNX2]: Update version to 1.6.6.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[BNX2]: Optimize firmware loading.Michael Chan
This is a follow up to the patches from Denys Vlasenkos <vda.linux@googlemail.com> to further optimize firmware loading. 1. In bnx2_init_cpus(), we allocate memory for decompression once and use it repeatedly instead of doing this for every firmware image. 2. We eliminate the BSS and SBSS firmware sections in bnx2_fw*.h since these are always zeros. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10PCMCIA-NETDEV : add new id (axnet_cs, pcnet_cs)Komuro
axnet_cs: Laneed LD-CDK/TX pcnet_cs: LEMEL LM-N89TX PRO Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10smc91x Hitachi Solution Engine (SuperH) SupportNobuhiro Iwamatsu
Hi, all. This patch supports Hitachi Solution Engine (SuperH) of smc91x. Please apply this patch . regards, Nobuhiro -- Nobuhiro Iwamatsu E-Mail : iwamatsu@nigauri.org GPG ID : 3170EBE9 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10smc911x irq sense request and MPR2 board supportMarkus Brunner
Hi, this are the changes to the smc911x driver, which were necessary to get it running on the Magic Panel R2 (smsc9115). It is a SH3-DSP based board. The other patches are available on the linuxsh-dev mailinglist. http://marc.info/?l=linuxsh-dev&r=1&b=200708&w=2 It was necessary to set the irq sense to low level. Therefor the SMC_IRQ_SENSE define was added. How are the chances for inclusion in 2.6.24? Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10ehea: DLPAR memory add fixJan-Bernd Themann
Due to stability issues in high load situations the HW queue handling has to be changed. The HW queues are now stopped and restarted again instead of destroying and allocating new HW queues. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10fs_enet: sparse fixesScott Wood
Mostly a bunch of __iomem annotations. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10fs_enet: Convert mii-bitbang to use the generic bitbang MDIO code.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 00:13:57 +0000