aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-03-30V4L/DVB (10692): usbvision: convert to v4l2_device/v4l2_subdev.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10691): v4l2-common: add v4l2_i2c_subdev_addr()Hans Verkuil
Add small function to retrieve the i2c address from a v4l2_subdev pointer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10687): v4l2-common/v4l2-spec: support/document write-only and ↵Hans Verkuil
button controls The controls V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET changed their type to button controls (these are unused at the moment, so this is a safe change). The controls V4L2_CID_PAN_RELATIVE, V4L2_CID_TILT_RELATIVE, V4L2_CID_FOCUS_RELATIVE and V4L2_CID_ZOOM_RELATIVE are marked as write-only controls. Cc: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10685): v4l2: add colorfx support to v4l2-common.c, and add to ↵Hans Verkuil
'Changes' in spec. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10681): gspca - zc3xx: Bad probe of the ov7630c sensor.Jean-Francois Moine
This patch fixes an other bug of the kernel bug report 12737. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10680): gspca - zc3xx: Bad probe of the ov7xxx sensors.Jean-Francois Moine
This patch fixes one bug of the kernel bug report 12737. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10679): gspca - sonixj: Handle the webcam 0c45:613c instead of sn9c102.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10676): mt9m111: Call icl->reset() on mt9m111_reset().Antonio Ospite
Call icl->reset() on mt9m111_reset(). Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10674): soc-camera: camera host driver for i.MX3x SoCsGuennadi Liakhovetski
Tested with 8 bit Bayer and 8 bit monochrome video. create mode 100644 arch/arm/plat-mxc/include/mach/mx3_camera.h create mode 100644 drivers/media/video/mx3_camera.c Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10673): mt9t031: fix gain and hflip controls, register update, and ↵Guennadi Liakhovetski
scaling Multiple fixes: 1. allow register update by setting the Output Control register to 2 and not 3 2. fix scaling factor calculations 3. recover lost HFLIP control 4. fix Global Gain calculation Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10672): sh_mobile_ceu_camera: include NV* formats into the format ↵Guennadi Liakhovetski
list only once. Currently, if an soc-camera device, connected to the sh_mobile_ceu_camera camera host driver, supports several formats from the UYVY, VYUY, YUYV, YVYU set, the driver would add four NV* formats for each of them. This patch fixes this misbehaviour. Reported-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10671): sh_mobile_ceu: SOCAM flags are not platform dependentKuninori Morimoto
sh_mobile_ceu_camera.c support for signal polarity flags isn't platform dependent, provide them locally. Only the bus width is implementation specific. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10670): tw9910: bit mask operation fix on tw9910_mask_set.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10669): ov772x: Add image flip supportKuninori Morimoto
o ov772x_camera_info :: flags supports default image flip. o V4L2_CID_VFLIP/HFLIP supports image flip for user side. Thank Magnus for advice. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10668): ov772x: bit mask operation fix on ov772x_mask_set.Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10667): ov772x: setting method to register is changed.Kuninori Morimoto
Color format regs array had been used, but it was not easy to understand what to want to do, and additional bit became complex. This patch modify this problem. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10666): ov772x: move configuration from start_capture() to set_fmt()Kuninori Morimoto
soc_camera framework requires, that camera configuration is performed in set_fmt, and start_capture and stop_capture only turn the camera on/off. This patch modifies ov772x to comply to this requirement. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10665): soc-camera: add data signal polarity flags to driversGuennadi Liakhovetski
All soc-camera camera and host drivers must specify supported data signal polarity, after all drivers are fixed, we'll add a suitable test to soc_camera_bus_param_compatible(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10662): remove redundant memset after kzallocMatthias Schwarzott
Hi there! While having a look at the allocation of struct dvb_frontend in *_attach functions, I found some cases calling memset after kzalloc. This is redundant, and the attached patch removes these calls. I also changed one case calling kmalloc and memset to kzalloc. Regards Matthias Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10657): [PATCH] V4L: missing parentheses?Roel Kluin
Add missing parentheses Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10655): tvp514x: make the module aware of rich peopleSebastian Andrzej Siewior
because they might design two of those chips on a single board. You never know. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10654): em28xx: VideoMate For You USB TV box requires tvaudioMauro Carvalho Chehab
As reported by Vitaly Wool <vital@embeddedalley.com>: > about half a year ago I posted the patch that basically enabled Compro > VideoMate For You USB TV box support. > The main problem is I couldn't get the sound working. > So I kind of decomposed the box and found out the audio decoder chip > used there was Philips TDA9874A. As far as I can see, it's not supported > within the em28xx suite although it is for other TV tuner drivers. A tvaudio modprobing confirms that tda9874a chip is accessible via i2c: tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840, tda9873h, tda9874h/a, tda9850, tda9855, tea6300, tea6320, tea6420, tda8425, pic16c54 (PV951), ta8874z tvaudio' 1-0058: chip found @ 0xb0 tvaudio' 1-0058: tvaudio': chip_read2: reg254=0x11 tvaudio' 1-0058: tvaudio': chip_read2: reg255=0x2 tvaudio' 1-0058: tda9874a_checkit(): DIC=0x11, SIC=0x2. tvaudio' 1-0058: found tda9874a. tvaudio' 1-0058: tda9874h/a found @ 0xb0 (em28xx #0) tvaudio' 1-0058: tda9874h/a: chip_write: reg0=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg1=0xc0 tvaudio' 1-0058: tda9874h/a: chip_write: reg2=0x2 tvaudio' 1-0058: tda9874h/a: chip_write: reg11=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg12=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg13=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg14=0x1 tvaudio' 1-0058: tda9874h/a: chip_write: reg15=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg16=0x14 tvaudio' 1-0058: tda9874h/a: chip_write: reg17=0x50 tvaudio' 1-0058: tda9874h/a: chip_write: reg18=0xf9 tvaudio' 1-0058: tda9874h/a: chip_write: reg19=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg20=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg24=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg255=0x0 tvaudio' 1-0058: tda9874a_setup(): A2, B/G [0x00]. tvaudio' 1-0058: tda9874h/a: thread started] This patch automatically loads tvaudio when needed (currently, only with this board). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10652): uvcvideo: Add quirk to override wrong bandwidth value for ↵Laurent Pinchart
Vimicro devices At least 3 Vimicro cameras (0x332d, 0x3410 and 0x3420) fail to return correct bandwidth information. The first model rounds the value provided by the host to the nearest supported packet size, while the other two always request the maximum bandwidth. Introduce a device quirk to override the value returned by the device with an estimated bandwidth computed by the driver from the frame size and frame rate, and enable it for all Vimicro cameras. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10651): uvcvideo: Ignore empty bulk URBsLaurent Pinchart
Devices may send a zero-length packet to signal the end of a bulk payload. If the payload size is a multiple of the URB size the zero-length packet will be received by the URB completion handler. Handle this by ignoring all empty URBs. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10650): uvcvideo: Initialize streaming parameters with the probe ↵Laurent Pinchart
control value The UVC specification requires SET_CUR requests on the streaming commit control to use values retrieved from a successful GET_CUR request on the probe control. Initialize streaming parameters with the probe control current value to make sure the driver always complies. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10647): vivi: add slider flag to controls.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10646): vivi: controls are per-device, not global.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10645): vivi: introduce v4l2_device and do several cleanupsHans Verkuil
- add v4l2_device - remove BKL - make the debug parameter settable on the fly - set bus_info in querycap Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10644): v4l2-subdev: rename dev field to v4l2_devHans Verkuil
Remain consistent in the naming: fields pointing to v4l2_device should be called v4l2_dev. There are too many device-like entities without adding to the confusion by mixing naming conventions. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10643): v4l2-device: allow a NULL parent device when registering.Hans Verkuil
Some drivers (e.g. for ISA devices) have no parent device because there is no associated bus driver. Allow the parent device to be NULL in those cases when registering v4l2_device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10642): vivi: update comment to reflect that vivi can now create ↵Hans Verkuil
more than 32 devs. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10641): v4l2-dev: remove limit of 32 devices per driver in get_index()Hans Verkuil
get_index() had a limitation of 32 devices per driver. This was unnecessarily strict and has been replaced with the maximum number of devices. That should really satisfy anyone! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10639): gspca - sq905: New subdriver.Adam Baker
Add initial support for cameras based on the SQ Technologies SQ-905 chipset (USB ID 2770:9120) to V4L2 using the gspca infrastructure. Currently only supports one resolution and doesn't attempt to inform libv4l what image flipping options are needed. Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10638): gspca - t613: Bad debug level when displaying the sensor type.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10637): gspca - t613: Bad sensor name in kernel trace when 'other' ↵Jean-Francois Moine
sensor. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10636): gspca - sonixj: Add autogain for ov7630/48 and vflip for ↵Jean-Francois Moine
ov7648. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10635): gspca - sonixj: No vertical flip control for mt9v111.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10620): gspca - main: More checks of the device disconnection.Jean-Francois Moine
- prevent application oops when the device is disconnected - wake up the application at disconnection time - check the disconnection in ioctl dqbuf and poll Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10534): Output HW/SW version from scratchpadTobias Lorenz
This patch adds functions to access the scratchpad. For it is this good for? In the first two bytes, the developers stored the HW/PCB version and the software release of the firmware. This is now written to syslog, so debugging get's easier. Also knowing the versions is the key for flash upgrades later on. There are also some cleanups of the flash report sizes. Altogether this should justify the new version number 1.0.9. Thanks to Rick Bronson <rick@efn.org> Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10633): DAB: fix typoMárton Németh
Fix typo in "DAB adapters" section in Kconfig. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10632): Added support for AVerMedia Cardbus Hybrid remote controlOldřich Jedlička
Added support for I2C device at address 0x40 and subaddress 0x0d/0x0b that provides remote control key reading support for AVerMedia Cardbus Hybrid card, possibly for other AVerMedia Cardbus cards. The I2C address 0x40 doesn't like the SAA7134's 0xfd quirk, so it was disabled. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10631): zoran: fix printk formatRandy Dunlap
Fix printk format warning: drivers/media/video/zoran/zoran_driver.c:345: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'phys_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB: calibration still successful at 10Roel Kluin
With while (i++ < 10) { ... } i can reach 11, so callibration still succeeds at i == 10. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10629): tvp514x: try_count reaches 0, not -1Roel Kluin
with while (try_count-- > 0) { ... } try_count reaches 0, not -1. Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10628): V4L: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10618): gspca - some drivers: Fix compilation warnings.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10617): gspca - vc032x: Remove the vc0321 reset.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10616): tw9910: color format check is added on set_fmtKuninori Morimoto
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10574): saa7134: fix Avermedia E506R composite inputTim Farrington
Make correction to composite input plus svideo input to Avermedia E506R Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10568): bttv: dynamically allocate device dataTrent Piepho
The bttv driver had static array of structures for up to 16 possible bttv devices, even though few users have more than one or two. The structures were quite large and this resulted in a huge BSS segment. Change the driver to allocate the bttv device data dynamically, which changes "struct bttv bttvs[BTTV_MAX]" to "struct bttv *bttvs[BTTV_MAX]". It would be nice to get ride of "bttvs" entirely but there are some complications with gpio access from the audio & mpeg drivers. To help bttvs removal along anyway, I changed the open() methods use the video device's drvdata to get the driver data instead of looking it up in the bttvs array. This is also more efficient. Some WARN_ON()s are added in cases the device node exists by the bttv device doesn't, which I don't think should be possible. The gpio access functions need to check if bttvs[card] is NULL now. Though calling them on a non-existent card in the first place is wrong, but hard to solve given the fundamental problems in how the gpio access code works. This patch reduces the bss size by 66560 bytes on ia32. Overall change is a reduction of 66398 bytes, as the WARN_ON()s add some 198 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-14 19:34:29 +0000