aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-03-30PCI PM: Make pci_set_power_state() handle devices with no PM supportRafael J. Wysocki
There is a problem with PCI devices without any PM support (either native or through the platform) that pci_set_power_state() always returns error code for them, even if they are being put into D0. However, such devices are always in D0, so pci_set_power_state() should return success when attempting to put such a device into D0. It also should update the current_state field for these devices as appropriate. This modification is necessary so that the standard configuration registers of these devices are successfully restored by pci_restore_standard_config() during the "early" phase of resume. In addition, pci_set_power_state() should check the value of current_state before calling the platform to change the power state of the device to avoid doing that unnecessarily. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Put devices into low power states during late suspend (rev. 2)Rafael J. Wysocki
Once we have allowed timer interrupts to be enabled during the late phase of suspending devices, we are now able to use the generic pci_set_power_state() to put PCI devices into low power states at that time. We can also use some related platform callbacks, like the ones preparing devices for wake-up, during the late suspend. Doing this will allow us to avoid the race condition where a device using shared interrupts is put into a low power state with interrupts enabled and then an interrupt (for another device) comes in and confuses its driver. At the same time, devices that don't support the native PCI PM or that require some additional, platform-specific operations to be carried out to put them into low power states will be handled as appropriate. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Move pci_restore_standard_config to pci-driver.cRafael J. Wysocki
Move pci_restore_standard_config() from pci.c to pci-driver.c and make it static. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Use pci_set_power_state during early resumeRafael J. Wysocki
Once we have allowed timer interrupts to be enabled during the early phase of resuming devices, we are now able to use the generic pci_set_power_state() to put PCI devices into D0 at that time. Then, the platform-specific PM code will have a chance to handle devices that don't implement the native PCI PM or that require some additional, platform-specific operations to be carried out to power them up. Also, by doing this we can simplify the code quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Consistently use variable name "error" for pm call return valuesFrans Pop
I noticed two functions use a variable "i" to store the return value of PM function calls while the rest of the file uses "error". As "i" normally indicates a counter of some sort it seems better to keep this consistent. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-03-30PM: Rework handling of interrupts during suspend-resumeRafael J. Wysocki
Use the functions introduced in by the previous patch, suspend_device_irqs(), resume_device_irqs() and check_wakeup_irqs(), to rework the handling of interrupts during suspend (hibernation) and resume. Namely, interrupts will only be disabled on the CPU right before suspending sysdevs, while device drivers will be prevented from receiving interrupts, with the help of the new helper function, before their "late" suspend callbacks run (and analogously during resume). In addition, since the device interrups are now disabled before the CPU has turned all interrupts off and the CPU will ACK the interrupts setting the IRQ_PENDING bit for them, check in sysdev_suspend() if any wake-up interrupts are pending and abort suspend if that's the case. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-03-30Merge branch 'x86-stage-3-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-stage-3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (190 commits) Revert "cpuacct: reduce one NULL check in fast-path" Revert "x86: don't compile vsmp_64 for 32bit" x86: Correct behaviour of irq affinity x86: early_ioremap_init(), use __fix_to_virt(), because we are sure it's safe x86: use default_cpu_mask_to_apicid for 64bit x86: fix set_extra_move_desc calling x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited prot x86/dmi: fix dmi_alloc() section mismatches x86: e820 fix various signedness issues in setup.c and e820.c x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time x86: irq.c keep CONFIG_X86_LOCAL_APIC interrupts together x86: irq.c use same path for show_interrupts x86: cpu/cpu.h cleanup x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c Revert "x86: create a non-zero sized bm_pte only when needed" x86: pci-nommu.c cleanup x86: io_delay.c cleanup x86: rtc.c cleanup x86: i8253 cleanup x86: kdebugfs.c cleanup ...
2009-03-30Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds
* 'bkl-removal' of git://git.lwn.net/linux-2.6: Fix a lockdep warning in fasync_helper() Add a missing unlock_kernel() in raw_open()
2009-03-30Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (21 commits) MIPS: Alchemy: PB1200: use SMC91X platform data. MIPS: Alchemy: MIPS hazard workarounds are not required. MIPS: Alchemy: provide cpu feature overrides. MIPS: Alchemy: unify CPU model constants. MIPS: Make a needlessly global symbol static in arch/mips/kernel/smp.c MIPS: Fix global namespace pollution in arch/mips/kernel/smp-up.c MIPS: Malta: make a needlessly global integer variable static MIPS: Use BUG_ON() where possible. MIPS: Convert obsolete irq_desc_t to struct irq_desc MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platforms MIPS: EMMA2RH: Set UART mapbase MIPS: EMMA2RH: Use set_irq_chip_and_handler_name MIPS: EMMA2RH: Use handle_edge_irq() handler for GPIO interrupts MIPS: Mark Eins: Fix cascading interrupt dispatcher MIPS: Au1000: convert to using gpiolib MIPS: Stop using <asm-generic/int-l64.h>. MIPS: Cavium: Add -Werror MIPS: Makefile: Add simple make install target. MIPS: Compat: Zero upper 32-bit of offset_high and offset_low. MIPS: __raw_spin_lock() may spin forever on ticket wrap. ...
2009-03-30Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (180 commits) powerpc: clean up ssi.txt, add definition for fsl,ssi-asynchronous powerpc/85xx: Add support for the "socrates" board (MPC8544). powerpc: Fix bugs introduced by sysfs changes powerpc: Sanitize stack pointer in signal handling code powerpc: Add write barrier before enabling DTL flags powerpc/83xx: Update ranges in gianfar node to match other dts powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes powerpc/83xx: Add power management support for MPC837x boards powerpc/mm: Introduce early_init_mmu() on 64-bit powerpc/mm: Add option for non-atomic PTE updates to ppc64 powerpc/mm: Fix printk type warning in mmu_context_nohash powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c powerpc/mm: Merge various PTE bits and accessors definitions powerpc/mm: Tweak PTE bit combination definitions powerpc/cell: Fix iommu exception reporting powerpc/mm: e300c2/c3/c4 TLB errata workaround powerpc/mm: Used free register to save a few cycles in SW TLB miss handling powerpc/mm: Remove unused register usage in SW TLB miss handling ...
2009-03-30Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (707 commits) V4L/DVB (11316): saa7191: tuner ops wasn't set. V4L/DVB (11315): cx25840: fix 'unused variable' warning. V4L/DVB (11314): au8522: remove unused I2C_DRIVERID V4L/DVB (11313): v4l2-subdev: add enum_framesizes and enum_frameintervals. V4L/DVB (11312): tuner: remove V4L1 code from this driver. V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c drivers V4L/DVB (11310): cx18: remove intermediate 'ioctl' step V4L/DVB (11309): cx25840: cleanup: remove intermediate 'ioctl' step V4L/DVB (11308): msp3400: use the V4L2 header since no V4L1 code is there V4L/DVB (11305): cx88: prevent probing rtc and ir devices V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no longer needed. V4L/DVB (11303): tda7432: remove legacy code for old-style i2c API V4L/DVB (11302): tda9875: remove legacy code for old-style i2c API V4L/DVB (11301): wm8775: remove legacy code for old-style i2c API V4L/DVB (11300): cx88: convert to v4l2_subdev. V4L/DVB (11298): cx25840: remove legacy code for old-style i2c API V4L/DVB (11297): cx23885: convert to v4l2_subdev. V4L/DVB (11296): cx23885: bugfix error message if firmware is not found V4L/DVB (11295): cx23885: convert to v4l2_device. V4L/DVB (11293): uvcvideo: Add zero fill for VIDIOC_ENUM_FMT ...
2009-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (70 commits) ide: keep track of number of bytes instead of sectors in struct ide_cmd ide: remove ide_execute_pkt_cmd() (v2) ide: add ->dma_timer_expiry method and remove ->dma_exec_cmd one (v2) ide: set hwif->expiry prior to calling [__]ide_set_handler() ide: use do_rw_taskfile() for ATA_CMD_PACKET commands ide: pass command to ide_map_sg() ide: remove ide_end_request() ide: use ide_end_rq() in ide_complete_rq() ide: pass number of bytes to complete to ide_complete_rq() ide: remove BUG() from ide_complete_rq() ide: move rq->errors quirk out from ide_end_request() ide: pass error value to ide_complete_rq() ide: sanitize ide_end_rq() ide: add ide_end_rq() (v2) ide: make ide_special_rq() BUG() on unknown requests ide: sanitize ide_finish_cmd() ide: use ide_complete_cmd() for REQ_UNPARK_HEADS ide: use ide_complete_cmd() for head unload commands ide: task_error() -> task_error_cmd() ide: unify exit paths in task_pio_intr() ...
2009-03-30V4L/DVB (11316): saa7191: tuner ops wasn't set.Hans Verkuil
The tuner ops pointer wasn't set, so s_std never worked here. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11315): cx25840: fix 'unused variable' warning.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11314): au8522: remove unused I2C_DRIVERIDHans Verkuil
I2C_DRIVERIDs are no longer needed with v4l2_subdev and will be removed from the kernel soon. Cc: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11312): tuner: remove V4L1 code from this driver.Hans Verkuil
No i2c modules are called with the V4L1 API anymore, so this can be removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11311): v4l: replace 'ioctl' references in v4l i2c driversHans Verkuil
Replace 'VIDIOC_' references in v4l i2c drivers by their new v4l2_subdev callback names. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11310): cx18: remove intermediate 'ioctl' stepHans Verkuil
The audio and vbi parts still used an 'ioctl'-like interface. Replace this with normal functions. Cc: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11309): cx25840: cleanup: remove intermediate 'ioctl' stepHans Verkuil
The audio and vbi functions where still called through an ioctl-like interface, even though this is no longer needed with v4l2-subdev. Just change each 'case' into a proper function and call that directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11308): msp3400: use the V4L2 header since no V4L1 code is thereMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11305): cx88: prevent probing rtc and ir devicesHans Verkuil
tuner-core.c contains a hack for cx88 board to prevent probing of certain addresses: /* HACK: Ignore 0x6b and 0x6f on cx88 boards. * FusionHDTV5 RT Gold has an ir receiver at 0x6b * and an RTC at 0x6f which can get corrupted if probed. */ With the new i2c API this hack no longer works. So instead change the list of tuner probe addresses in the cx88 driver itself, which is much more clean. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11304): v4l2: remove v4l2_subdev_command calls where they are no ↵Hans Verkuil
longer needed. Several i2c drivers still used v4l2_subdev_command, even though they were converted to v4l2_subdev. Remove those unused .command callbacks. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11303): tda7432: remove legacy code for old-style i2c APIHans Verkuil
tda7432 is no longer used with the old-style i2c API, so I can remove the support for that. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11302): tda9875: remove legacy code for old-style i2c APIHans Verkuil
tda9875 is no longer used with the old-style i2c API, so I can remove the support for that. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11301): wm8775: remove legacy code for old-style i2c APIHans Verkuil
All drivers that use wm8775 are now converted to v4l2_subdev, so I can remove the support for the old-style i2c API. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11300): cx88: convert to v4l2_subdev.Hans Verkuil
Convert cx88 to use v4l2_subdev since the old i2c autoprobing mechanism will be removed. Added code to explicitly load tvaudio where needed. Also fix the rtc-isl1208 support: since that driver no longer supports autoprobing it has to be loaded using the new i2c API. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11298): cx25840: remove legacy code for old-style i2c APIHans Verkuil
All drivers that use cx25840 are now converted to v4l2_subdev, so I can remove the support for the old-style i2c API. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11297): cx23885: convert to v4l2_subdev.Hans Verkuil
Convert this driver to v4l2_subdev. Note that currently the only card with analog support in this driver is the HVR-1800. The analog tuner support in this driver is limited to what is needed for this board. When analog support is added for other cards, then the tuner load code will probably have to be expanded to take care of those boards. For example, there is currently no support for either radio tuners or tda9887 demods. I'd like to thank Steven Toth for testing this on his HVR-1800. Tested-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11296): cx23885: bugfix error message if firmware is not foundSteven Toth
If the firmware failed to be found the error message indicated the incorrect filename. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11295): cx23885: convert to v4l2_device.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11293): uvcvideo: Add zero fill for VIDIOC_ENUM_FMTMárton Németh
When enumerating formats with VIDIOC_ENUM_FMT the uvcvideo driver does not fill the reserved fields of the struct v4l2_fmtdesc with zeros as required by V4L2 API revision 0.24 [1]. Add the missing initializations. The patch was tested with v4l-test 0.10 [2] with CNF7129 webcam found on EeePC 901. References: [1] V4L2 API specification, revision 0.24 http://v4l2spec.bytesex.org/spec/r8367.htm [2] v4l-test: Test environment for Video For Linux Two API http://v4l-test.sourceforge.net/ Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11292): uvcvideo: Add support for Syntek cameras found in JAOtech ↵Laurent Pinchart
Smart Terminals Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11290): Add Elgato EyeTV DTT to dibcom driverKlaus Flittner
This patch introduces support for DVB-T for the following dibcom based card: Elgato EyeTV DTT (USB-ID: 0fd9:0021) Signed-off-by: Klaus Flittner <klaus@flittner.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11289): Patch for Yuan MC770 DVB-T (1164:0871)Xoan Loureiro
This patch adds support for the Yuan MC770 DVB-T (1164:0871). Thanks to Xoan Loureiro. Signed-off-by: Xoan Loureiro <x04n2.0@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11288): Code cleanup (passes checkpatch now) of the ↵Uwe Bugla
b2c2-flexcop-drivers 2/2 This is the second part of the code cleanup changing the usb and pci-driver cores. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11287): Code cleanup (passes checkpatch now) of the ↵Uwe Bugla
b2c2-flexcop-drivers 1/2 This patch cleans up the source code of the b2c2 flexcop-driver. It is the first of a total of two. The code is now passing the checkpatch-script. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11285): Remove unecessary udelayPatrick Boettcher
When resetting the PID-filter block a safety msleep(1) was injected. Now that the function is called from interrupt context, it was replaced with a udelay. It seems that this delay is not necessary at all, let's remove it for now and test a while. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11284): Fix i2c code of flexcop-driver for rare revisionsPatrick Boettcher
This patch adds a workaround in the i2c-code of the flexcop-driver to fix support for SkyStar2 rev 2.7. There are not many devices out there, that's why this bug was not revealed earlier. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11283): saa6588: remove legacy code.Hans Verkuil
saa6588 is now only used through v4l2_subdev, so we can remove the old legacy code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11282): saa7134: add RDS support.Hans Verkuil
The Terratec Cinergy 600 TV MK3 supports the RDS decoder saa6588. Add support to saa7134 for such devices. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11281): bttv: move saa6588 config to the helper chip configHans Verkuil
saa6588 can also be used by other drivers than just bttv. Move it to a new RDS decoders category and add it as helper chip to bttv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11279): bttv: tda9875 is no longer used by bttv, so remove from ↵Hans Verkuil
bt8xx/Kconfig. Since tda9875 support was merged into tvaudio the bttv driver no longer needs tda9875 as helper driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11278): bttv: convert to v4l2_subdev since i2c autoprobing will ↵Hans Verkuil
disappear. Since i2c autoprobing will disappear bttv needs to be converted to use v4l2_subdev instead. Without autoprobing the autoload module option has become obsolete. A warning is generated if it is set, but it is otherwise ignored. Since the bttv card definitions are of questionable value a new option was introduced to allow the user to control which audio module is selected: msp3400, tda7432 or tvaudio (or none at all). By default bttv will use the card definitions and fallback on tvaudio as the last resort. If no audio device was found a warning is printed. The saa6588 RDS device is now also explicitly probed since it is no longer possible to autoprobe it. A new saa6588 module option was added to override the card definition since I suspect more cards have this device than one would guess from the card definitions. Note that the probe addresses of the i2c modules are hardcoded in this driver. Once all v4l drivers are converted to v4l2_subdev this will be cleaned up. Such data belongs in an i2c driver header. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11277): tvaudio: always call init_timer to prevent rmmod crash.Hans Verkuil
In the tvaudio_remove function del_timer_sync(&chip->wt) is called. However, chip->wt isn't always initialized depending on the type of audio chip. Since del_timer_sync hangs when given an uninitialized timer we should always initialize it. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11276): tvaudio: add tda9875 support.Hans Verkuil
This change allows bttv to use tvaudio for this device. Since this device has the same i2c address as the tda9874 we need to support both in the same tvaudio driver. This makes it possible for tvaudio to detect which chip is used. Originally the tda9875 was only available in the dedicated tda9875 driver, but that makes life very hard for bttv since loading tvaudio might misdetect a tda9875 as a tda9874. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11275): tvaudio: fix mute and s/g_tuner handlingHans Verkuil
The mute control depends on CHIP_HAS_INPUTSEL, so test for that first. The s/g_tuner code should check whether getmode/setmode is set at the beginning instead of filling in the struct and discovering at the end that this chip doesn't implement audiomodes after all (i.e. is a simple muxer chip). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11272): zr364xx: Remove code for things already done by video_ioctl2Trent Piepho
The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the buffer's 'type' field since it must already be set to VIDEO_CAPTURE. Checking the buffer type can be removed from zr364xx_vidioc_(s|g|try|enum)_fmt_vid_cap(). The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code can be removed from zr364xx_vidioc_querycap(), zr364xx_vidioc_enum_input(), zr364xx_vidioc_enum_fmt_vid_cap(), and zr364xx_vidioc_g_fmt_vid_cap(). Cc: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11271): usbvision: Remove buffer type checks from enum_fmt_vid_cap, ↵Trent Piepho
XXXbuf The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)buf() and vidioc_reqbufs(). Since this driver only defines ->vidioc_try_fmt_vid_cap() the checks can be removed from vidioc_reqbufs(), vidioc_qbuf(), and vidioc_dqbuf(). The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the buffer's 'type' field since it must already be set to VIDEO_CAPTURE. So setting the buffer type in vidioc_enum_fmt_vid_cap() can be removed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11270): meye: Remove buffer type checks from XXX_fmt_vid_cap, XXXbufTrent Piepho
The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the buffer's 'type' field since it must already be set to VIDEO_CAPTURE. The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)bufs() and vidioc_reqbufs(). Since this driver only defines ->vidioc_try_fmt_vid_cap() the checks can be removed from vidioc_reqbufs(), vidioc_querybuf(), vidioc_qbuf(), and vidioc_dqbuf(). Also, the buffer index is unsigned so it's not necessary to check if it is less than zero. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11269): cx88-blackbird: Stop setting buffer type in XXX_fmt_vid_capTrent Piepho
The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the 'type' field since it must already be set to VIDEO_CAPTURE. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 19:04:49 +0000