aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-11-11[PATCH] gt96100eth.c: Don't concatenate __FUNCTION__ with strings.Ralf Baechle
As part of the ISO C9x conversion gcc deprecates concatenation with __FUNCTION__ because __FUNCTION__ is not a preprocessor macro. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] smc91x: DB1200 support.Pete Popov
The following patch support the SMC9111 present on DB1200 boards. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] SAA9730: Driver overhaulRalf Baechle
o Try to work around some of the undocumented "features" of the SAA9730 o Use netdev_priv() instead of the previous broken mechanism to allocate the private data structure. o Try to make sure we don't leak resources on exit. o No more need to call SET_MODULE_OWNER in 2.6. o Use pci_free_consistent instead of homegrown architecture-specific allocation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 531 +++++++++++++++++++++++--------------------------- 1 files changed, 249 insertions(+), 282 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] SAA9730: Whitespace cleanup.Ralf Baechle
Kill trailing whitespace, replace leading whitespace with tabs. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> drivers/net/saa9730.c | 98 +++++++++++++++++++++++++------------------------- 1 files changed, 49 insertions(+), 49 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[netdrvr forcedeth] phy address scan rangeAyaz Abdulla
Added phy address 0 to the phy scan. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
2005-11-11[netdrvr forcedeth] support for irq mitigationAyaz Abdulla
This patch contains support for different modes of interrupt mitigation of forcedeth. It includes changes based on Jeff's comments. Currently, the modes are changed through module parameters since ethtool does not support something similar. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
2005-11-11[netdrvr forcedeth] remove superfluous rx engine stop/startAyaz Abdulla
Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
2005-11-11[PATCH] gianfar mii needs to zero out the mii_bus structureKumar Gala
To ensure that phy_mask and any future elements of the mii_bus structure are initialized use kzalloc() instead of kmalloc(). This fixes an issue in which phy_mask was not being initialized and we would skip random phy addresses when scanning. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: mail address changedFrank Pavlic
[patch 7/7] s390: mail address changed From: Frank Pavlic <fpavlic@de.ibm.com> - mail address changed to fpavlic@de.ibm.com Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: lcs.c | 4 ++-- qeth_main.c | 4 ++-- qeth_mpc.c | 2 +- qeth_mpc.h | 2 +- qeth_sys.c | 2 +- qeth_tso.h | 2 +- 6 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: introduce guestLan sniffer support in qethFrank Pavlic
[patch 6/7] s390: introduce guestLan sniffer support in qeth From: Peter Tiedemann <ptiedem@de.ibm.com> - introduce guestLan sniffer support in qeth feature allows a linux in a virtual machine guest to become a network LAN sniffer, monitoring and recording the networking traffic within an entire guestLan. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 2 + qeth_main.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ qeth_mpc.h | 11 ++++--- 3 files changed, 102 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: fix recovery failure of non-guestLAN devicesFrank Pavlic
[patch 5/7] s390: fix recovery failure of non-guestLAN devices From: Frank Pavlic <fpavlic@de.ibm.com> - Recovery of non-guestLAN Layer 2 device failed due to trying to register the real MAC address we got from the READ_MAC adapter parameters command. We have to keep the "old" MAC address when we process the reply of a READ_MAC. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 12 ++++++------ qeth_main.c | 27 ++++++++++++++++----------- 2 files changed, 22 insertions(+), 17 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: some more qeth fixesFrank Pavlic
[patch 4/7] s390: some more qeth fixes From: Frank Pavlic <fpavlic@de.ibm.com> From: Peter Tiedemann <ptiedem@de.ibm.com> - possible race on list fixed by reset list processing after every operation - traffic hang fixed Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: qeth multicast address registration fixedFrank Pavlic
[patch 3/7] s390: qeth multicast address registration fixed From: Klaus Dieter Wacker <kdwacker@de.ibm.com> - when running in Layer2 mode we don't have to register the multicast IP address but only group mac address. Therefore for Layer 2 devices it is enough to go through dev->mc_list list and register these entries. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 106 +++++++++++++++++++++++++++++++++++++++++++++--------------- 1 files changed, 80 insertions(+), 26 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: minor modification in qeth layer2 codeFrank Pavlic
[patch 2/7] s390: minor modification in qeth layer2 code From: Frank Pavlic <fpavlic@de.ibm.com> - use qeth_layer2_send_setdelvlan_cb to check return code of a SET/DELVLAN IP Assist command. It fits better in qeth's design and mechanism of IP Assist command handling. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth_main.c | 40 ++++++++++++++++++++++++++-------------- 1 files changed, 26 insertions(+), 14 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] s390: synthax checking for VIPA addresses fixedFrank Pavlic
[patch 1/7] s390: synthax checking for VIPA addresses fixed From: Peter Tiedemann <ptiedem@de.ibm.com> - synthax checking for VIPA addresses fixed Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> diffstat: qeth.h | 65 ++++++++++++++++++++++++++++++++++++++++++++++++------------- qeth_sys.c | 6 ++--- 2 files changed, 55 insertions(+), 16 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11Merge branch 'atmel'Jeff Garzik
2005-11-11[PATCH] Atmel wireless updatesimon@thekelleys.org.uk
* Merge PCMCIA card table with new Brodowski PCMCIA id table. * Add missing entries to PCMCIA id table. * Other tweaks to conform with Documentation/driver-changes.txt (types, call request_region, etc) * Fix size of requested IO region. * Reduce printk verbosity. * Remove EXPERIMENTAL * tweak to association code - don't force shared key authentication when wep in use. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-11[PATCH] disable DEBUG in ibmvethAnton Blanchard
At the moment ibmveth has DEBUG enabled which is rather verbose. Disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-10[PATCH] lpfc build fixJeff Garzik
Current upstream 'allmodconfig' build is broken. This is the obvious patch... Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-10[SPARC]: display7seg build fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[PATCH] PCI: fix namespace clashesRajesh Shah
Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: Change MSI to use physical delivery mode alwaysAshok Raj
MSI hardcoded delivery mode to use logical delivery mode. Recently x86_64 moved to use physical mode addressing to support physflat mode. With this mode enabled noticed that my eth with MSI werent working. msi_address_init() was hardcoded to use logical mode for i386 and x86_64. So when we switch to use physical mode, things stopped working. Since anyway we dont use lowest priority delivery with MSI, its always directed to just a single CPU. Its safe and simpler to use physical mode always, even when we use logical delivery mode for IPI's or other ioapic RTE's. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: drivers/pci/: small cleanupsAdrian Bunk
This patch contains the following cleanups: - access.c should #include "pci.h" for getting the prototypes of it's global functions - hotplug/shpchp_pci.c: make the needlessly global function program_fw_provided_values() static Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] dlpar regression for ppc64 - probe changeJohn Rose
This patch contains the driver bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe. This functionality was regressed when the new PCI approach was introduced. Please apply if appropriate. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: removed unneeded .owner field from struct pci_driverGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: automatically set device_driver.ownerLaurent riffard
A nice feature of sysfs is that it can create the symlink from the driver to the module that is contained in it. It requires that the device_driver.owner is set, what is not the case for many PCI drivers. This patch allows pci_register_driver to set automatically the device_driver.owner for any PCI driver. Credits to Al Viro who suggested the method. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> -- drivers/ide/setup-pci.c | 12 +++++++----- drivers/pci/pci-driver.c | 9 +++++---- include/linux/ide.h | 3 ++- include/linux/pci.h | 10 ++++++++-- 4 files changed, 22 insertions(+), 12 deletions(-)
2005-11-10[PATCH] pci-driver: store_new_id() not inlineRandy Dunlap
store_new_id() should not be (and cannot be) inline; the function pointer is stored in a device_attribute table. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: NCR 53c810 quirkIvan Kokshaysky
Move the PPC fixup for old NCR 810 controllers to generic quirks - it's needed for Alpha, x86 and other architectures that use setup-bus.c. Thanks to Jay Estabrook for pointing out the issue. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: Fix VIA 686 PCI quirk namesMeelis Roos
The quirk names for VIA 686 are mistyped in 2.6.14 (686 vs 868). S3 868 influence? :) Here is a patch to correct them. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: fix handling of power faults during hotplugrajesh.shah@intel.com
The current pciehp implementation reports a power-fail error even if the condition has cleared by the time the corresponding interrupt handling code gets a chance to run. This patch fixes this problem. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: clean-up how we request control of hotplug hardwarerajesh.shah@intel.com
This patch further tweaks how we request control of hotplug controller hardware from BIOS. We first search the ACPI namespace corresponding to a specific hotplug controller looking for an _OSC or OSHP method. On failure, we successively move to the ACPI parent object, till we hit the highest level host bridge in the hierarchy. This allows for different types of BIOS's which place the _OSC/OSHP methods at various places in the acpi namespace, while still not encroaching on the namespace of some other root level host bridge. This patch also introduces a new load time option (pciehp_force) that allows us to bypass all _OSC/OSHP checking. Not supporting these methods seems to be be the most common ACPI firmware problem we've run into. This will still _not_ allow the pciehp driver to work correctly if the BIOS really doesn't support pciehp (i.e. if it doesn't generate a hotplug interrupt). Use this option with caution. Some BIOS's may deliberately not build any _OSC/OSHP methods to make sure it retains control the hotplug hardware. Using the pciehp_force parameter for such systems can lead to two separate entities trying to control the same hardware. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: request control of each hotplug controller individuallyrajesh.shah@intel.com
This patch tweaks the way pciehp requests control of the hotplug hardware from BIOS. It now tries to invoke the ACPI _OSC method for a specific hotplug controller only, rather than walking the entire acpi namespace invoking all possible _OSC methods under all host bridges. This allows us to gain control of each hotplug controller individually, even if BIOS fails to give us control of some other hotplug controller in the system. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: reduce debug message verbosityrajesh.shah@intel.com
Reduce the number of debug messages generated if pciehp debug is enabled. I tried to restrict this to removing debug messages that are either early-driver-debug type messages, or print information that can be inferred through other debug prints. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: miscellaneous cleanupsrajesh.shah@intel.com
Remove un-necessary header includes, remove dead code, remove some hardcoded constants... Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: remove redundant data structuresrajesh.shah@intel.com
State information is currently stored in per-slot as well as per-pci-function data structures in pciehp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] pciehp: reduce dependence on ACPIrajesh.shah@intel.com
Reduce the PCI Express hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. We go to ACPI only to run the _OSC or _OSHP methods to transition control of hotplug hardware from system BIOS to the hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that pciehp does not automatically enable the hot-added device or its DMA bus mastering capability now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] patch 1/8] pciehp: use the PCI core for hotplug resource managementrajesh.shah@intel.com
This patch converts the pci express hotplug controller driver to use the PCI core for resource management. This eliminates a lot of duplicated code and integrates pciehp with the system's normal PCI handling code. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10[PATCH] PCI: add pci_find_next_capability()Roland Dreier
Some devices have more than one capability of the same type. For example, the PCI header for the PathScale InfiniPath looks like: 04:01.0 InfiniBand: Unknown device 1fc1:000d (rev 02) Subsystem: Unknown device 1fc1:000d Flags: bus master, fast devsel, latency 0, IRQ 193 Memory at fea00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [c0] HyperTransport: Slave or Primary Interface Capabilities: [f8] HyperTransport: Interrupt Discovery and Configuration There are _two_ HyperTransport capabilities, and the PathScale driver wants to look at both of them. The current pci_find_capability() API doesn't work for this, since it only allows us to get to the first capability of a given type. The patch below introduces a new pci_find_next_capability(), which can be used in a loop like for (pos = pci_find_capability(pdev, <ID>); pos; pos = pci_find_next_capability(pdev, pos, <ID>)) { /* ... */ } Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-10Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-11-10Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2005-11-10[BNX2]: simplify parameter checks in bnx2_{get,set}_eepromJohn W. Linville
Remove the superfluous parameter checking in bnx2_{get,set}_eeprom. The parameters are already validated in ethtool_{get,set}_eeprom. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[BNX2]: check return of dev_alloc_skb in bnx2_test_loopbackJohn W. Linville
Check return of dev_alloc_skb in bnx2_test_loopback, and handle appropriately. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[BNX2]: output driver name as prefix in error messageJohn W. Linville
Output driver name as prefix to "Unknown flash/EEPROM type." message. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[ATM]: [horizon] fix sparse warningsDave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Chas Williams <cmas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[IB] umad: further ib_unregister_mad_agent() deadlock fixesRoland Dreier
The previous umad deadlock fix left ib_umad_kill_port() still vulnerable to deadlocking. This patch fixes that by downgrading our lock to a read lock when we might end up trying to reacquire the lock for reading. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] mthca: fix posting long lists of receive work requestsMichael S. Tsirkin
In Tavor mode, when posting a long list of receive work requests, a doorbell must be rung every 256 requests. Add code to do this when required. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] mthca: fix wraparound handling in mthca_cq_clean()Roland Dreier
Handle case where prod_index has wrapped around and become less than cq->cons_index by checking that their difference as a signed int is positive rather than comparing directly. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] mthca: fix posting of atomic operationsMichael S. Tsirkin
The size of work requests for atomic operations was computed incorrectly in mthca: all sizeofs need to be divided by 16. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] uverbs: have kernel return QP capabilitiesJack Morgenstein
Move the computation of QP capabilities (max scatter/gather entries, max inline data, etc) into the kernel, and have the uverbs module return the values as part of the create QP response. This keeps precise knowledge of device limits in the low-level kernel driver. This requires an ABI bump, so while we're making changes, get rid of the max_sge parameter for the modify SRQ command -- it's not used and shouldn't be there. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] umad: get rid of unused mr arrayRoland Dreier
Now that ib_umad uses the new MAD sending interface, it no longer needs its own L_Key. So just delete the array of MRs that it keeps. Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 06:59:39 +0000