aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-03ACPI: Make /proc/acpi/wakeup interface handle PCI devices (again)Rafael J. Wysocki
Make the ACPI /proc/acpi/wakeup interface set the appropriate wake-up bits of physical devices corresponding to the ACPI devices and make those bits be set initially for devices that are enabled to wake up by default. This is needed to restore the 2.6.26 and earlier behavior for the PCI devices that were previously handled correctly with the help of the /proc/acpi/wakeup interface. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03leds-pca955x: add proper error handling and fix bogus memory handlingSven Wegener
Check the return value of led_classdev_register and unregister all registered devices, if registering one device fails. Also the dynamic memory handling is totally bogus. You can't allocate multiple chunks via kzalloc() and expect them to be in order later. I wonder how this ever worked. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Nate Case <ncase@xes-inc.com> Tested-by: Nate Case <ncase@xes-inc.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03leds-fsg: change order of initialization and deinitializationSven Wegener
On initialization, we first do the ioremap and then register the led devices. On deinitialization, we do it in reverse order. This prevents someone calling into the brightness_set functions with an invalid latch_address. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Acked-by: Rod Whitby <rod@whitby.id.au> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03dw_dmac: fix copy/paste bug in taskletHaavard Skinnemoen
The tasklet checks RAW.BLOCK twice, and does not check RAW.XFER. This is obviously wrong, and could theoretically cause the driver to hang. Reported-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03orion_spi: fix handling of default transfer speedLennert Buytenhek
Accept zero (the default!) as a per-transfer clock speed override. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03fbdev: fix recursive notifier and locking when fbdev console is blankedKrzysztof Helt
Fix infinite recursive notifier in the fbdev layer. This causes recursive locking. Dmitry Baryshkov found the problem and confirmed that the patch fixes the bug. After doing # echo 1 > /sys/class/graphics/fb0/blank I got the following in my kernel log: ============================================= [ INFO: possible recursive locking detected ] 2.6.27-rc6-00086-gda63874-dirty #97 --------------------------------------------- echo/1564 is trying to acquire lock: ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c but task is already holding lock: ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c other info that might help us debug this: 2 locks held by echo/1564: #0: (&buffer->mutex){--..}, at: [<c00ddde0>] sysfs_write_file+0x30/0x80 #1: ((fb_notifier_list).rwsem){..--}, at: [<c005a384>] __blocking_notifier_call_chain+0x38/0x6c stack backtrace: [<c0029fe4>] (dump_stack+0x0/0x14) from [<c0060ce0>] (print_deadlock_bug+0xa4/0xd0) [<c0060c3c>] (print_deadlock_bug+0x0/0xd0) from [<c0060e54>] (check_deadlock+0x148/0x17c) r6:c397a1e0 r5:c397a530 r4:c04fcf98 [<c0060d0c>] (check_deadlock+0x0/0x17c) from [<c00637e8>] (validate_chain+0x3c4/0x4f0) [<c0063424>] (validate_chain+0x0/0x4f0) from [<c0063efc>] (__lock_acquire+0x5e8/0x6b4) [<c0063914>] (__lock_acquire+0x0/0x6b4) from [<c006402c>] (lock_acquire+0x64/0x78) [<c0063fc8>] (lock_acquire+0x0/0x78) from [<c0316ca8>] (down_read+0x4c/0x60) r7:00000009 r6:ffffffff r5:c0427a40 r4:c005a384 [<c0316c5c>] (down_read+0x0/0x60) from [<c005a384>] (__blocking_notifier_call_chain+0x38/0x6c) r5:c0427a40 r4:c0427a74 [<c005a34c>] (__blocking_notifier_call_chain+0x0/0x6c) from [<c005a3d8>] (blocking_notifier_call_chain+0x20/0x28) r8:00000009 r7:c086d640 r6:c3967940 r5:00000000 r4:c38984b8 [<c005a3b8>] (blocking_notifier_call_chain+0x0/0x28) from [<c014baa0>] (fb_notifier_call_chain+0x1c/0x24) [<c014ba84>] (fb_notifier_call_chain+0x0/0x24) from [<c014c18c>] (fb_blank+0x64/0x70) [<c014c128>] (fb_blank+0x0/0x70) from [<c0155978>] (fbcon_blank+0x114/0x1bc) r5:00000001 r4:c38984b8 [<c0155864>] (fbcon_blank+0x0/0x1bc) from [<c0170ea8>] (do_blank_screen+0x1e0/0x2a0) [<c0170cc8>] (do_blank_screen+0x0/0x2a0) from [<c0154024>] (fbcon_fb_blanked+0x74/0x94) r5:c3967940 r4:00000001 [<c0153fb0>] (fbcon_fb_blanked+0x0/0x94) from [<c0154228>] (fbcon_event_notify+0x100/0x12c) r5:fffffffe r4:c39bc194 [<c0154128>] (fbcon_event_notify+0x0/0x12c) from [<c005a0d4>] (notifier_call_chain+0x38/0x7c) [<c005a09c>] (notifier_call_chain+0x0/0x7c) from [<c005a3a0>] (__blocking_notifier_call_chain+0x54/0x6c) r8:c3b51ea0 r7:00000009 r6:ffffffff r5:c0427a40 r4:c0427a74 [<c005a34c>] (__blocking_notifier_call_chain+0x0/0x6c) from [<c005a3d8>] (blocking_notifier_call_chain+0x20/0x28) r8:00000001 r7:c3a7e000 r6:00000000 r5:00000000 r4:c38984b8 [<c005a3b8>] (blocking_notifier_call_chain+0x0/0x28) from [<c014baa0>] (fb_notifier_call_chain+0x1c/0x24) [<c014ba84>] (fb_notifier_call_chain+0x0/0x24) from [<c014c18c>] (fb_blank+0x64/0x70) [<c014c128>] (fb_blank+0x0/0x70) from [<c014e450>] (store_blank+0x54/0x7c) r5:c38984b8 r4:c3b51ec4 [<c014e3fc>] (store_blank+0x0/0x7c) from [<c017981c>] (dev_attr_store+0x28/0x2c) r8:00000001 r7:c042bf80 r6:c39eba10 r5:c3967c30 r4:c38e0140 [<c01797f4>] (dev_attr_store+0x0/0x2c) from [<c00ddaac>] (flush_write_buffer+0x54/0x68) [<c00dda58>] (flush_write_buffer+0x0/0x68) from [<c00dde08>] (sysfs_write_file+0x58/0x80) r8:c3b51f78 r7:c3bcb070 r6:c39eba10 r5:00000001 r4:00000001 [<c00dddb0>] (sysfs_write_file+0x0/0x80) from [<c009de04>] (vfs_write+0xb8/0x148) [<c009dd4c>] (vfs_write+0x0/0x148) from [<c009e384>] (sys_write+0x44/0x70) r7:00000004 r6:c3bcb070 r5:00000000 r4:00000000 [<c009e340>] (sys_write+0x0/0x70) from [<c0025d00>] (ret_fast_syscall+0x0/0x2c) r6:4001b000 r5:00000001 r4:401dc658 Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Reported-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Testted-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03rtc: fix kernel panic on second use of SIGIO nofiticationMarcin Slusarz
When userspace uses SIGIO notification and forgets to disable it before closing file descriptor, rtc->async_queue contains stale pointer to struct file. When user space enables again SIGIO notification in different process, kernel dereferences this (poisoned) pointer and crashes. So disable SIGIO notification on close. Kernel panic: (second run of qemu (requires echo 1024 > /sys/class/rtc/rtc0/max_user_freq)) general protection fault: 0000 [1] PREEMPT CPU 0 Modules linked in: af_packet snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq usbhid tuner tea5767 tda8290 tuner_xc2028 xc5000 tda9887 tuner_simple tuner_types mt20xx tea5761 tda9875 uhci_hcd ehci_hcd usbcore bttv snd_via82xx snd_ac97_codec ac97_bus snd_pcm snd_timer ir_common compat_ioctl32 snd_page_alloc videodev v4l1_compat snd_mpu401_uart snd_rawmidi v4l2_common videobuf_dma_sg videobuf_core snd_seq_device snd btcx_risc soundcore tveeprom i2c_viapro Pid: 5781, comm: qemu-system-x86 Not tainted 2.6.27-rc6 #363 RIP: 0010:[<ffffffff8024f891>] [<ffffffff8024f891>] __lock_acquire+0x3db/0x73f RSP: 0000:ffffffff80674cb8 EFLAGS: 00010002 RAX: ffff8800224c62f0 RBX: 0000000000000046 RCX: 0000000000000002 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800224c62f0 RBP: ffffffff80674d08 R08: 0000000000000002 R09: 0000000000000001 R10: ffffffff80238941 R11: 0000000000000001 R12: 0000000000000000 R13: 6b6b6b6b6b6b6b6b R14: ffff88003a450080 R15: 0000000000000000 FS: 00007f98b69516f0(0000) GS:ffffffff80623200(0000) knlGS:00000000f7cc86d0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000a87000 CR3: 0000000022598000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qemu-system-x86 (pid: 5781, threadinfo ffff880028812000, task ffff88003a450080) Stack: ffffffff80674cf8 0000000180238440 0000000200000002 0000000000000000 ffff8800224c62f0 0000000000000046 0000000000000000 0000000000000002 0000000000000002 0000000000000000 ffffffff80674d68 ffffffff8024fc7a Call Trace: <IRQ> [<ffffffff8024fc7a>] lock_acquire+0x85/0xa9 [<ffffffff8029cb62>] ? send_sigio+0x2a/0x184 [<ffffffff80491d1f>] _read_lock+0x3e/0x4a [<ffffffff8029cb62>] ? send_sigio+0x2a/0x184 [<ffffffff8029cb62>] send_sigio+0x2a/0x184 [<ffffffff8024fb97>] ? __lock_acquire+0x6e1/0x73f [<ffffffff8029cd4d>] ? kill_fasync+0x2c/0x4e [<ffffffff8029cd10>] __kill_fasync+0x54/0x65 [<ffffffff8029cd5b>] kill_fasync+0x3a/0x4e [<ffffffff80402896>] rtc_update_irq+0x9c/0xa5 [<ffffffff80404640>] cmos_interrupt+0xae/0xc0 [<ffffffff8025d1c1>] handle_IRQ_event+0x25/0x5a [<ffffffff8025e5e4>] handle_edge_irq+0xdd/0x123 [<ffffffff8020da34>] do_IRQ+0xe4/0x144 [<ffffffff8020bad6>] ret_from_intr+0x0/0xf <EOI> [<ffffffff8026fdc2>] ? __alloc_pages_internal+0xe7/0x3ad [<ffffffff8033fe67>] ? clear_page_c+0x7/0x10 [<ffffffff8026fc10>] ? get_page_from_freelist+0x385/0x450 [<ffffffff8026fdc2>] ? __alloc_pages_internal+0xe7/0x3ad [<ffffffff80280aac>] ? anon_vma_prepare+0x2e/0xf6 [<ffffffff80279400>] ? handle_mm_fault+0x227/0x6a5 [<ffffffff80494716>] ? do_page_fault+0x494/0x83f [<ffffffff8049251d>] ? error_exit+0x0/0xa9 Code: cc 41 39 45 28 74 24 e8 5e 1d 0f 00 85 c0 0f 84 6a 03 00 00 83 3d 8f a9 aa 00 00 be 47 03 00 00 0f 84 6a 02 00 00 e9 53 03 00 00 <41> ff 85 38 01 00 00 45 8b be 90 06 00 00 41 83 ff 2f 76 24 e8 RIP [<ffffffff8024f891>] __lock_acquire+0x3db/0x73f RSP <ffffffff80674cb8> ---[ end trace 431877d860448760 ]--- Kernel panic - not syncing: Aiee, killing interrupt handler! Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-03[S390] qdio: prevent stack clobberJan Glauber
Don't print more information than fits into the string on the stack. Combine the informational output of qdio to fit into one line. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-03e1000e: Fix incorrect debug warningLinus Torvalds
Doing 'WARN_ON(preempt_count())' was horribly horribly wrong, and would cause tons of warnings at bootup if PREEMPT was enabled because the initcalls currently run with the kernel lock, which increments the preempt count. At the same time, the warning was also insufficient, since it didn't check that interrupts were enabled. The proper debug function to use for something that can sleep and wants a warning if it's called in the wrong context is 'might_sleep()'. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02Check mapped ranges on sysfs resource filesLinus Torvalds
This is loosely based on a patch by Jesse Barnes to check the user-space PCI mappings though the sysfs interfaces. Quoting Jesse's original explanation: It's fairly common for applications to map PCI resources through sysfs. However, with the current implementation, it's possible for an application to map far more than the range corresponding to the resourceN file it opened. This patch plugs that hole by checking the range at mmap time, similar to what is done on platforms like sparc64 in their lower level PCI remapping routines. It was initially put together to help debug the e1000e NVRAM corruption problem, since we initially thought an X driver might be walking past the end of one of its mappings and clobbering the NVRAM. It now looks like that's not the case, but doing the check is still important for obvious reasons. and this version of the patch differs in that it uses a helper function to clarify the code, and does all the checks in pages (instead of bytes) in order to avoid overflows when doing "<< PAGE_SHIFT" etc. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: update version from k4 to k6Jesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: debug contention on NVM SWFLAGThomas Gleixner
This patch adds a mutex to the e1000e driver that would help catch any collisions of two e1000e threads accessing hardware at the same time. description and patch updated by Jesse Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: drop stats lockJesse Brandeburg
the stats lock is left over from e1000, e1000e no longer has the adjust tbi stats function that required the addition of the stats lock to begin with. adding a mutex to acquire_swflag helped catch this one too. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: remove phy read from inside spinlockJesse Brandeburg
thanks to tglx, we're finding some interesting reentrancy issues. this patch removes the phy read from inside a spinlock, paving the way for removing the spinlock completely. The phy read was only feeding a statistic that wasn't used. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: do not ever sleep in interrupt contextJesse Brandeburg
e1000e was apparently calling two functions that attempted to reserve the SWFLAG bit for exclusive (to hardware and firmware) access to the PHY and NVM (aka eeprom). These accesses could possibly call msleep to wait for the resource which is not allowed from interrupt context. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02e1000e: reset swflag after resetting hardwareJesse Brandeburg
in the process of debugging things, noticed that the swflag is not reset by the driver after reset, and the swflag is probably not reset unless management firmware clears it after 100ms. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02braille_console: only register notifiers when the braille console is usedPascal Terjan
Only register the braille driver VT and keyboard notifiers when the braille console is used. Avoids eating insert or backspace keys. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11242 Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02fbcon: fix monochrome color value calculationDavid Winn
Commit 22af89aa0c0b4012a7431114a340efd3665a7617 ("fbcon: replace mono_col macro with static inline") changed the order of operations for computing monochrome color values. This generates 0xffff000f instead of 0x0000000f for a 4 bit monochrome color, leading to image corruption if it is passed to cfb_imageblit or other similar functions. Fix it up. Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> [2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-01e1000e: write protect ICHx NVM to prevent malicious write/eraseBruce Allan
Set the hardware to ignore all write/erase cycles to the GbE region in the ICHx NVM. This feature can be disabled by the WriteProtectNVM module parameter (enabled by default) only after a hardware reset, but the machine must be power cycled before trying to enable writes. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: arjan@linux.intel.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-01pxa2xx_spi: fix build breakageMike Rapoport
This patch fixes a build error in the pxa2xx-spi driver, introduced by commit 7e96445533ac3f4f7964646a202ff3620602fab4 ("pxa2xx_spi: dma bugfixes") CC drivers/spi/pxa2xx_spi.o drivers/spi/pxa2xx_spi.c: In function 'map_dma_buffers': drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c:331: error: invalid operands to binary & drivers/spi/pxa2xx_spi.c: In function 'pump_transfers': drivers/spi/pxa2xx_spi.c:897: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' [dbrownell@users.sourceforge.net: fix warning too ] Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-01dm mpath: add missing path switching lockingChandra Seetharaman
Moving the path activation to workqueue along with scsi_dh patches introduced a race. It is due to the fact that the current_pgpath (in the multipath data structure) can be modified if changes happen in any of the paths leading to the lun. If the changes lead to current_pgpath being set to NULL, then it leads to the invalid access which results in the panic below. This patch fixes that by storing the pgpath to activate in the multipath data structure and properly protecting it. Note that if activate_path is called twice in succession with different pgpath, with the second one being called before the first one is done, then activate path will be called twice for the second pgpath, which is fine. Unable to handle kernel paging request for data at address 0x00000020 Faulting instruction address: 0xd000000000aa1844 cpu 0x1: Vector: 300 (Data Access) at [c00000006b987a80] pc: d000000000aa1844: .activate_path+0x30/0x218 [dm_multipath] lr: c000000000087a2c: .run_workqueue+0x114/0x204 sp: c00000006b987d00 msr: 8000000000009032 dar: 20 dsisr: 40000000 current = 0xc0000000676bb3f0 paca = 0xc0000000006f3680 pid = 2528, comm = kmpath_handlerd enter ? for help [c00000006b987da0] c000000000087a2c .run_workqueue+0x114/0x204 [c00000006b987e40] c000000000088b58 .worker_thread+0x120/0x144 [c00000006b987f00] c00000000008ca70 .kthread+0x78/0xc4 [c00000006b987f90] c000000000027cc8 .kernel_thread+0x4c/0x68 Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-01dm: cope with access beyond end of device in dm_merge_bvecMikulas Patocka
If for any reason dm_merge_bvec() is given an offset beyond the end of the device, avoid an oops and always allow one page to be added to an empty bio. We'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-01dm: always allow one page in dm_merge_bvecMikulas Patocka
Some callers assume they can always add at least one page to an empty bio, so dm_merge_bvec should not return 0 in this case: we'll reject the I/O later after the bio is submitted. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-09-30mfd: Fix asic3 compilationSamuel Ortiz
map_size was declared from the wrong place. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-09-30mfd: Fix Kconfig accroding to the new gpiolib symbolsSamuel Ortiz
HAVE_GPIO_LIB has basically been replaced by GPIOLIB Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: cdrom: update ioctl documentation ide: note that IDE generic may prevent other drivers from attaching ide-tape: fix vendor strings Swarm: Fix crash due to missing initialization
2008-09-29Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devices [MIPS] BCM47xx: Fix build error due to missing PCI functions [MIPS] IP27: Switch to dynamic interrupt routing avoding panic on error. [MIPS] au1000: Make sure GPIO value is zero or one
2008-09-29Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdboc,tty: Fix tty polling search to use name correctly kgdb, x86_64: fix PS CS SS registers in gdb serial kgdb, x86_64: gdb serial has BX and DX reversed kgdb, x86, arm, mips, powerpc: ignore user space single stepping kgdb: could not write to the last of valid memory with kgdb
2008-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qlogicpti: fix sg list traversal error in continuation entries [SCSI] Fix hang with split requests [SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes.
2008-09-29Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: scsi: fix fall out of sg-chaining patch in qlogicpti
2008-09-29scsi: fix fall out of sg-chaining patch in qlogicptiBoaz Harrosh
Boaz writes: "I've reviewed all patches since Matthew's, and I find one small problem. In the load_cmd() there is a compound loop where the first 4 sg's are set then the rest are set into a memory structure in group of 7 sg's. Well the second 7-group and on is a bug because sg pointer does not advance. This is a fall out from Jens's patch." The reporter, Meelis Roos <mroos@ut.ee>, verified that this patch does indeed fix his problem with qlogicpti. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-09-29sata_nv: reinstate nv_hardreset() for non generic controllersTejun Heo
Commit 2fd673ecf0378ddeeeb87b3605e50212e0c0ddc6 which tried to remove hardreset for generic accidentally removed it for all flavors as all others were inheriting from nv_generic_ops. This patch reinstates nv_hardreset() and puts it into nv_common_ops which all flavors inherit from. nv_generic_ops now inherits from nv_common_ops and overrides .hardreset to ATA_OP_NULL. While at it, explain why nv_hardreset and ATA_OP_NULL override are necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-28[SCSI] qlogicpti: fix sg list traversal error in continuation entriesBoaz Harrosh
The current sg list traversal logic for the continuation entries doesn't advance the list pointer once all seven slots are used, so the next continuation entry (if there is one) wrongly begins again at the start of the sg list. Fix by advancing the sg pointer after the for_each_sg(). Reported-by: Meelis Roos <mroos@ut.ee> Cc: David Miller <davem@davemloft.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-09-27ide: note that IDE generic may prevent other drivers from attachingTejun Heo
Enabling IDE generic may prevent ATA controllers located on legacy ports from being attached to more proper driver or can prevent other controllers which share the IRQ from working. Note it in the help message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: xerces8 <xerces8@butn.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: stein@hermes.si [bart: s/will grab/may grab/ since Borislav has fixed PCI-case for .28] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-09-27ide-tape: fix vendor stringsBorislav Petkov
Remove superfluous two bytes from each string buffer and add proper length format specifiers. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Tested-by: Mark de Wever <koraq@xs4all.nl> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-09-27Swarm: Fix crash due to missing initializationRalf Baechle
If things are just right this will result in the hws[0]->parent being passed to ide_host_add() being non-zero and an ooops a little later. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-09-27[SSB] Initialise dma_mask for SSB_BUSTYPE_SSB devicesAurelien Jarno
For SSB_BUSTYPE_SSB type devices, we need to initialize dma_mask using coherent_dma_mask so that calls to dma_set_mask() succeed. It fixes the regression on the b44 driver introduced by commit f225763a7d6c92c4932dbd528437997078496fcc Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-09-26kgdboc,tty: Fix tty polling search to use name correctlyJason Wessel
The tty_find_polling_driver() routine did not correctly check the base part of the tty name. This can lead to kgdboc selecting an incorrect driver, as well as accepting a completely invalid tty such as "echo ffff0 > /sys/module/kgdboc/parameters/kgdboc". Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-09-25IPoIB: Fix crash when path record fails after path flushRoland Dreier
Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM change events") changed how paths are flushed on an SM event. This change introduces a problem if the path record query triggered by fails, causing path->ah to become NULL. A later successful path query will then trigger WARN_ON() in path_rec_completion(), and crash because path->ah has already been freed, so the ipoib_put_ah() inside the lock in path_rec_completion() may actually drop the last reference (contrary to the comment that claims this is safe). Fix this by updating path->ah and freeing old_ah only when the path record query is successful. This prevents the neighbour AH and that path AH from getting out of sync. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1194> Reported-by: Rabah Salem <ravah@mellanox.com> Debugged-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: netfilter: ip6t_{hbh,dst}: Rejects not-strict mode on rule insertion ath9k: disable MIB interrupts to fix interrupt storm [Bluetooth] Fix USB disconnect handling of btusb driver [Bluetooth] Fix wrong URB handling of btusb driver [Bluetooth] Fix I/O errors on MacBooks with Broadcom chips
2008-09-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-09-24ath9k: disable MIB interrupts to fix interrupt stormLuis R. Rodriguez
Enabling the MIB interrupts has proven to cause an interrupt storm after 7 hours of run. We will make use of the MIB interrupt once we have ANI supported added so for now to cure this we disable the interrupt. The interrupt storm can be seen as follows after 7 hours of run as reported by Steven Noonan <steven@uplinklabs.net>: 18:28:38 sum 1106.00 18:28:39 sum 1037.62 18:28:40 sum 1069.00 18:28:41 sum 1167.00 18:28:42 sum 1155.00 18:28:43 sum 1339.00 18:28:44 sum 18355.00 18:28:45 sum 17845.45 18:28:46 sum 15285.00 18:28:47 sum 17511.00 18:28:48 sum 17568.69 18:28:49 sum 17704.04 18:28:50 sum 18566.67 18:28:51 sum 18913.13 at 18:28:44 the MIB interrupt kicked off and caused huge latency which can be seen even on a video he submitted: http://www.youtube.com/watch?v=4GeCx1gZMpA Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24i2c-dev: Return correct error code on class_create() failureSven Wegener
We need to convert the error pointer from class_create(), else we'll return the successful return code from register_chrdev() on failure. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-09-24i2c-powermac: Fix section for probe and remove functionsUwe Kleine-Koenig
__devexit for i2c_powermac_probe is obviously wrong. In the definition of struct platform_driver i2c_powermac_driver the remove function i2c_powermac_remove is wrapped in __devexit_p, so it should be defined using __devexit. Signed-off-by: Uwe Kleine-Koenig <ukleinek@informatik.uni-freiburg.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-09-23USB: revert recovery from transient errorsAlan Stern
This patch (as1135) essentially reverts the major parts of two earlier patches to usbcore, because they ended up causing a regression. Trying to recover from transient communication errors can lead to other problems, because operations that failed during the error period are not always retried. The simplest example is the initial Set-Config request sent after device enumeration; if it gets lost then it will not be retried and the device will remain unconfigured. This patch restores the old behavior in which any port disconnect or port disable causes the entire device structure to be removed, fixing a reported regression. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23usb: unusual devs patch for Nokia 5310 Music XpressDavid Almaroad
The Nokia 5310 Music Xpress phone reports one too many sectors in usb-storage mode. This patch resolves that. Signed-off-by: David Almaroad <dalmaroad@gmail.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23usb: ftdi_sio: add support for Domintell devicesGaetan Carlier
Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01 module. PIDs were missing. Signed-off-by: Gaetan Carlier <gcpatch@gmail.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: drivers/usb/musb/: disable it on SuperHAndrew Morton
In file included from drivers/usb/musb/musb_core.h:59, from drivers/usb/musb/musb_core.c:108: drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:42: error: conflicting types for '__raw_readsl' /usr/src/devel/arch/sh/include/asm/io.h:112: error: previous declaration of '__raw_readsl' was here drivers/usb/musb/musb_io.h:44: error: conflicting types for 'readsw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'readsw' was here drivers/usb/musb/musb_io.h:46: error: conflicting types for 'readsb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'readsb' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:49: error: conflicting types for '__raw_writesl' /usr/src/devel/arch/sh/include/asm/io.h:111: error: previous declaration of '__raw_writesl' was here drivers/usb/musb/musb_io.h:51: error: conflicting types for 'writesw' /usr/src/devel/arch/sh/include/asm/io.h:164: error: previous definition of 'writesw' was here drivers/usb/musb/musb_io.h:53: error: conflicting types for 'writesb' /usr/src/devel/arch/sh/include/asm/io.h:163: error: previous definition of 'writesb' was here Cc: Karsten Keil <kkeil@suse.de> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB Serial: Sierra: Add MC8785 VID/PIDKevin Lloyd
Add another MC8785 VID/PID Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-09-23USB: serial: add ZTE CDMA Tech id to option driverOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>