aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-03-05[PATCH] libata: revalidate after transfer mode configurationTejun Heo
Revalidate device after transfer mode configuration. This also makes dev->id up-to-date. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] libata: implement ata_dev_revalidate()Tejun Heo
ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] libata: add @print_info argument to ata_dev_configure()Tejun Heo
Add @print_info argument to ata_dev_configure(). Details of configured device is printed only when @pinfo_info is non-zero. This patch also reorganizes device info printing for LBA case to simplify code (necessary as @print_info adds extra nesting around it). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] libata: re-initialize parameters before configuringTejun Heo
In ata_dev_configure(), reinitialize parameters before configuring. This change is for revalidation and hotplug. As ata_dev_configure() can be entered multiple times, parameters need to be reinitialized. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] sata_sil: cosmetic flag/constant changesTejun Heo
Collect common host flags into SIL_DFL_HOST_FLAGS and add comments to constants. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] sata_sil: replace register address constants with sil_port[] entryTejun Heo
Kill SIL_FIFO_* and SIL_IDE2_BMDMA and replace them with proper sil_port[] entry. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] sata_sil: use kzallocTejun Heo
Use kzalloc instead of kmalloc/memset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] sata_sil: replace sil_3112_m15w board id with sil_3112Tejun Heo
All 3112's have m15w. Replace sil_3112_m15w with sil_3112 and flag sil_3112 with SIL_FLAG_MOD15WRITE. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Carlos Pardo <Carlos.Pardo@siliconimage.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] ata_piix: rename PIIX_FLAG_IGN_PRESENT to PIIX_FLAG_IGNORE_PCSTejun Heo
Rename PIIX_FLAG_IGN_PRESENT to PIIX_FLAG_IGNORE_PCS as Jeff requested. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04[PATCH] sata_promise: Support FastTrak TX4300/TX4310Daniel Drake
This patch adds support for the Promise FastTrak TX4300/TX4310 4-port PCI SATA controllers based on the PDC40719 chip. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] libata: reorganize ata_bus_probe()Tejun Heo
Now that reset and configure are converted such that they don't modify or disable libata core data structures, reorganize ata_bus_probe() to reflect this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] libata: fold ata_dev_config() into ata_dev_configure()Tejun Heo
ata_dev_config() needs to be done everytime a device is configured. Fold it into ata_dev_configure(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] libata: separate out ata_dev_configure()Tejun Heo
Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] libata: convert dev->id to pointerTejun Heo
Convert dev->id from array to pointer. This is to accomodate revalidation. During revalidation, both old and new IDENTIFY pages should be accessible and single ->id array doesn't cut it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] ata_piix: reimplement piix_sata_probe()Tejun Heo
Reimplement piix_sata_probe() such that it turns on PCS enable bits on all avaliable ports and check present bits after a while to determine device presence. This should help broken BIOSes. After device presence detection is complete, PCS enable bits of unoccupied bits are turned off unless the controller supports AHCI (ICH6/7 docs mandate all enables bits are always set on AHCI capable controllers). Note that PCS present bits are ignored on 6300ESB as described in the datasheet. This should fix device detection problems reported with the controller. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] ata_piix: implement proper port mapTejun Heo
Replace combined mode handling via PIIX_COMB/COMB_PATA_P0 with proper port map. PIIX now prints port configuration during initialization. ATA_FLAG_SLAVE_POSS is now turned on for SATA ports only when the slave device is actually avaliable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] ata_piix: add a couple of flagsTejun Heo
Add PIIX_FLAG_IGN_PRESENT and SCR flags. Thi patch doesn't cause any functional change. To be used by later init/scr updates. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-03[PATCH] ata_piix: finer-grained port_infoTejun Heo
Make port_info finer-grained. This patch doesn't cause any functional change. Later init reimplementation will make use of it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01[PATCH] sata_sil: remove unneeded ATA_FLAG_SRST from 3512 port infoTejun Heo
Now unneeded ATA_FLAG_SRST sneaked into sil_3512 port info while merging upstream-fixes. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01[PATCH] libata: kill illegal kfree(id)Tejun Heo
Kill kfree(id) in failure path of ata_dev_read_id(). id is not dynamically allocated yet. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01[PATCH] sata_sil24: add a new PCI ID for SiI 3124Tejun Heo
Add a new PCI ID for SiI 3124. Reported by Silicon Image. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Carlos Pardo <Carlos.Pardo@siliconimage.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01Merge branch 'master'Jeff Garzik
2006-03-01Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
2006-02-28Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-02-28Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2006-02-28[PATCH] synclink_gt: make ->init_error signedDarren Jenkins
Examples of misuse are 3112 info->init_error = -1; 4440 if ((info->init_error = register_test(info)) < 0) { Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28[PATCH] tty buffering: comment out debug codePaul Fulghum
Comment out debug code in tty receive buffering. For performance reasons (I'll keep it enabled in -mm). Signed-off-by: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28[PATCH] video1394: fix "return E;" typoAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ben Collins <bcollins@debian.org> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28[PATCH] pnp bus type fixAdam Belay
This is Adam's pnp probing fix. It's been reported to fix hangs on several people's machines. I don't know if it's official or final, and Adam isn't contactable at present. But I'm not aware of the patch causing any regressions. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28[PATCH] Altix: more ioc3 cleanups and locking fixesPat Gefre
Some "inline" removing that Andrew suggested, removed some locking on add/remove at this level - we'll let the callees decide. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28[PATCH] drivers/mtd/redboot.c: recognise a foreign byte sex partition tableJohn Bowler
The RedBoot boot loader writes flash partition tables containing native byte sex 32 bit values. When booting an opposite byte sex kernel (e.g. an LE kernel from BE RedBoot) the current MTD driver fails to handle the partition table and therefore is unable to generate the correct partition map for the flash. So far as I am aware this problem is ARM specific, because only ARM supports software change of the CPU (memory system) byte sex, however the partition table parsing is in generic MTD code. The patch below has been tested on NSLU2 (an IXP4XX based system) with a patch, 10-ixp4xx-copy-from.patch (submitted to linux-arm-kernel - it's ARM specific) required to make the maps/ixp4xx.c driver work with an LE kernel. Builds of the patched system are in the 'unstable' release of OpenSlug and UcSlugC available from www.nslu2-linux.org. These builds are BE, the archives at www.nslu2-linux.org and www.handhelds.org (see monotone.vanille.de) can be built LE (currently DISTRO targets nslu-ltu.conf for LE thumb uclibc (32 bit kernel) and nslu2-lau.conf, nslu2-lag.conf for LE arm uclibc/glibc) and this patch has been tested extensively will both BE and LE systems on the NSLU2 (including swapping between BE and LE by reflashing from both RedBoot and Linux). The patch recognises that the FIS directory (the partition table) is byte-reversed by examining the partition table size, which is known to be one erase block (this is an assumption made elsewhere in redboot.c). If the size matches the erase block after byte swapping the value then byte-reversal is assumed, if not no further action is taken. The patched code is fail safe; should redboot.c be changed to support a partition table with a modified size field the test will fail and the partition table will be assumed to have the host byte sex. If byte-reversal is detected the patch byte swaps the remainder of the 32 bit fields in the copy of the table; this copy is then used to set up the MTD partition map. Signed-off-by: John Bowler <jbowler@acm.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-28[PATCH] sky2: remove MSI supportStephen Hemminger
Remove Message Signaled Interrupt support (for 2.6.16). MSI is inherently edge-triggered and that is incompatiable (without more work) with NAPI. In future, will replace with smarter lockless-IRQ handling like tg3.c Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-28Merge branch 'for-jeff' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6
2006-02-28Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
2006-02-28[PATCH] USB: ftdi_sio: new microHAM device IDsIan Abbott
This patch adds a bunch of new device IDs to the ftdi_sio driver for various devices from microHAM using FTDI chips. Micheal Studer supplied the PID for the USB-Y9 device. I examined the INF file in microHAM's Windows driver package for the USB-KW, USB-YS, USB-IC, USB-DB9 and USB-RS232 devices. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: visor.c id for gspda smartphoneHendrik Schweppe
Added the USB vendorID of GSPDA and the productID of GSPDA's palm smartphone 'xplore m68' to the list of known devices. Signed-off-by: Hendrik Schweppe <linuxkpatch@hendrik.fam-schweppe.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: Gadget RNDIS fix alloc bug. (buffer overflow)Shaun Tancheff
Remote NDIS response to OID_GEN_SUPPORTED_LIST only allocated space for the data attached to the reply, and not the reply structure itself. This caused other kmalloc'd memory to be corrupted. Signed-off-by: Shaun Tancheff <shaun@tancheff.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: lh7a40x gadget driver: Fixed a dead lockFranck Bui-Huu
There is a dead lock in lh7a40x udc driver. When the driver receive a SET_FEATURE HALT request, the dev lock is taken by the interrupt handler lh7a40x_udc_irq then the handler will call lh7a40x_set_halt function which in its turn will try to acquire the dev lock. Signed-off-by: Franck Bui-Huu <franck.bui-huu@innova-card.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: unusual_devs entry for Lyra RCA RD1080Alan Stern
This patch (as656) adds an unusual_devs.h entry for the Lyra RCA RD1080 MP3 player. Its card-reader firmware has the common report-one-too-many-sectors bug. This fixes Novell bug #152175. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: Wisegroup MP-8866 Dual USB JoypadAndrew Fuller
This patch is for the Dual USB Joypad [0925:8866] from Wisegroup. The HID_QUIRK_NOGET is necessary for it to respond to input, and the HID_QUIRK_MULTI_INPUT is necessary to have two js# nodes appear. Signed-off-by: Andrew Fuller <mactalla.obair@gmail.com> Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[PATCH] USB: fix EHCI BIOS handshakeDavid Brownell
Fix http://bugzilla.kernel.org/show_bug.cgi?id=6128 Finish morphing the "early handoff" version of the EHCI BIOS handshake over to match the previous implementation inside the EHCI driver (except that now we forcibly disable the SMI). The version that had been with the PCI code was surprisingly full of bugs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <yazar256@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-02-28[SUNSU]: Fix locking error in sunsu_stop_rx().David S. Miller
The caller takes the UART port lock, so we shouldn't try to take it again. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-28[SCSI] aha152x: fix variable use before initialisation and other bugsJürgen E. Fischer
- change interface of the reset functions from Scsi_Cmnd to Scsi_Host. - add functions with the original interface and rename the new functions to reflect the new interface. - call these from the pcmcia driver, thereby avoiding the need to construct a (broken) Scsi_Cmnd from a Scsi_Host. - just run the bh if the interrupt is from the controller and if so ensure that it's only called once per interrupt. Signed-off-by: Juergen E. Fischer <fischer@linux-buechse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] Fix uninitialised width and speed in sym2Matthew Wilcox
sym2 boards without NVRAM currently negotiate narrow due to this missed initialisation Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] Delete duplicate driver template.Ralf Baechle
Stuborn as compilers are they don't like duplicate definitions. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2006-02-27[SCSI] scsi: scsi command retries off by one fixBrian King
Fix up an off by one error in calculating retries for scsi commands. This bug was discovered when an SG_IO request was sent to scsi core with retries = 0, causing the overall timeout check to go off in scsi_softirq_done. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] megaraid_sas: fix physical disk handlingChristoph Hellwig
This patch hides the devices completely from the midlayer instead. It requires the patch to handle the slave_configure failure I posted earlier. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[libata] Disable FUAJeff Garzik
Until problems are sorted.
2006-02-27[SCSI] scsi: handle ->slave_configure return valueChristoph Hellwig
When ­>slave_configure fails the scsi midlayer should handle it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 11:04:39 +0000