aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-10ide: remove drive->driveidBartlomiej Zolnierkiewicz
* Factor out HDIO_[OBSOLETE,GET]_IDENTITY ioctls handling to ide_get_identity_ioctl(). * Use temporary buffer in ide_get_identity_ioctl() instead of accessing drive->id directly. * Add ide_id_to_hd_driveid() inline to convert raw id into struct hd_driveid format (needed on big-endian). * Use ide_id_to_hd_driveid() in ide_get_identity_ioctl(), cleanup ide_fix_driveid() and switch ide to use use raw id. * Remove no longer needed drive->driveid. This leaves us with 3 users of struct hd_driveid in tree: - arch/um/drivers/ubd_kern.c - drivers/block/xsysace.c - drivers/usb/storage/isd200.c While at it: * Use ata_id_u{32,64}() and ata_id_has_{dma,lba,iordy}() macros. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: make drive->id an union (take 2)Bartlomiej Zolnierkiewicz
Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: cleanup ide_fix_driveid()Bartlomiej Zolnierkiewicz
Do all __le16_to_cpu() swapping in one loop. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: cleanup ide_disk_init_mult_count()Bartlomiej Zolnierkiewicz
* Remove superfluous checks for drive->mult_req. * No need to zero drive's fields. * Move the common code out of #ifdef scope. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide: remove superfluous check from ide_disk_special()Bartlomiej Zolnierkiewicz
This condition is checked by both ide_disk_init_mult_count() and set_multcount() so no need to do it again in ide_disk_special(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10ide-tape: Buildfix when IDETAPE_DEBUG_LOG is set to 1.Mark de Wever
The format specifier for rq->sector didn't specify the proper size and signedness. Borislav Petkov discovered that the signedness for rq->nr_sectors and rq->current_nr_sectors also were incorrect. Signed-off-by: Mark de Wever <koraq@xs4all.nl> Acked-by: Borislav Petkov <petkovbb@gmail.com> [bart: remove trailing whitespace] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (29 commits) RDMA/nes: Fix slab corruption IB/mlx4: Set RLKEY bit for kernel QPs RDMA/nes: Correct error_module bit mask RDMA/nes: Fix routed RDMA connections RDMA/nes: Enhanced PFT management scheme RDMA/nes: Handle AE bounds violation RDMA/nes: Limit critical error interrupts RDMA/nes: Stop spurious MAC interrupts RDMA/nes: Correct tso_wqe_length RDMA/nes: Fill in firmware version for ethtool RDMA/nes: Use ethtool timer value RDMA/nes: Correct MAX TSO frags value RDMA/nes: Enable MC/UC after changing MTU RDMA/nes: Free NIC TX buffers when destroying NIC QP RDMA/nes: Fix MDC setting RDMA/nes: Add wqm_quanta module option RDMA/nes: Module parameter permissions RDMA/cxgb3: Set active_mtu in ib_port_attr RDMA/nes: Add support for 4-port 1G HP blade card RDMA/nes: Make mini_cm_connect() static ...
2008-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm: detect lost queue dm: publish dm_vcalloc dm: publish dm_table_unplug_all dm: publish dm_get_mapinfo dm: export struct dm_dev dm crypt: avoid unnecessary wait when splitting bio dm crypt: tidy ctx pending dm crypt: fix async inc_pending dm crypt: move dec_pending on error into write_io_submit dm crypt: remove inc_pending from write_io_submit dm crypt: tidy write loop pending dm crypt: tidy crypt alloc dm crypt: tidy inc pending dm exception store: use chunk_t for_areas dm exception store: introduce area_location function dm raid1: kcopyd should stop on error if errors handled dm mpath: remove is_active from struct dm_path dm mpath: use more error codes Fixed up trivial conflict in drivers/md/dm-mpath.c manually.
2008-10-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (37 commits) [SCSI] zfcp: fix double dbf id usage [SCSI] zfcp: wait on SCSI work to be finished before proceeding with init dev [SCSI] zfcp: fix erp list usage without using locks [SCSI] zfcp: prevent fc_remote_port_delete calls for unregistered rport [SCSI] zfcp: fix deadlock caused by shared work queue tasks [SCSI] zfcp: put threshold data in hba trace [SCSI] zfcp: Simplify zfcp data structures [SCSI] zfcp: Simplify get_adapter_by_busid [SCSI] zfcp: remove all typedefs and replace them with standards [SCSI] zfcp: attach and release SAN nameserver port on demand [SCSI] zfcp: remove unused references, declarations and flags [SCSI] zfcp: Update message with input from review [SCSI] zfcp: add queue_full sysfs attribute [SCSI] scsi_dh: suppress comparison warning [SCSI] scsi_dh: add Dell product information into rdac device handler [SCSI] qla2xxx: remove the unused SCSI_QLOGIC_FC_FIRMWARE option [SCSI] qla2xxx: fix printk format warnings [SCSI] qla2xxx: Update version number to 8.02.01-k8. [SCSI] qla2xxx: Ignore payload reserved-bits during RSCN processing. [SCSI] qla2xxx: Additional residual-count corrections during UNDERRUN handling. ...
2008-10-10Merge branch 'for-2.6.28' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.28' of git://git.kernel.dk/linux-2.6-block: (132 commits) doc/cdrom: Trvial documentation error, file not present block_dev: fix kernel-doc in new functions block: add some comments around the bio read-write flags block: mark bio_split_pool static block: Find bio sector offset given idx and offset block: gendisk integrity wrapper block: Switch blk_integrity_compare from bdev to gendisk block: Fix double put in blk_integrity_unregister block: Introduce integrity data ownership flag block: revert part of d7533ad0e132f92e75c1b2eb7c26387b25a583c1 bio.h: Remove unused conditional code block: remove end_{queued|dequeued}_request() block: change elevator to use __blk_end_request() gdrom: change to use __blk_end_request() memstick: change to use __blk_end_request() virtio_blk: change to use __blk_end_request() blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structure block: add lld busy state exporting interface block: Fix blk_start_queueing() to not kick a stopped queue include blktrace_api.h in headers_install ...
2008-10-10PnP: move pnpacpi/pnpbios_init to after PCI initLinus Torvalds
We already did that a long time ago for pnp_system_init, but pnpacpi_init and pnpbios_init remained as subsys_initcalls, and get linked into the kernel before the arch-specific routines that finalize the PCI resources (pci_subsys_init). This means that the PnP routines would either register their resources before the PCI layer could, or would be unable to check whether a PCI resource had already been registered. Both are problematic. I wanted to do this before 2.6.27, but every time we change something like this, something breaks. That said, _every_ single time we trust some firmware (like PnP tables) more than we trust the hardware itself (like PCI probing), the problems have been worse. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-10Merge branch 'upstream-2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs libata-eh: clear UNIT ATTENTION after reset ata_piix: add Hercules EC-900 mini-notebook to ich_laptop short cable list libata: reorder ata_device to remove 8 bytes of padding on 64 bits [libata] pata_bf54x: Add proper PM operation pata_sil680: convert CONFIG_PPC_MERGE to CONFIG_PPC libata: Implement disk shock protection support [libata] Introduce ata_id_has_unload() PATA: RPC now selects HAVE_PATA_PLATFORM for pata platform driver ata_piix: drop merged SCR access and use slave_link instead libata: implement slave_link libata: misc updates to prepare for slave link libata: reimplement link iterator libata: make SCR access ops per-link
2008-10-10dm: detect lost queueAlasdair G Kergon
Detect and report buggy drivers that destroy their request_queue. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Stefan Raspl <raspl@linux.vnet.ibm.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org>
2008-10-10dm: publish dm_vcallocMikulas Patocka
Publish dm_vcalloc in include/linux/device-mapper.h because this function is used by targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm: publish dm_table_unplug_allMikulas Patocka
Publish dm_table_unplug_all in include/linux/device-mapper.h because this function is used by targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm: publish dm_get_mapinfoMikulas Patocka
Publish dm_get_mapinfo in include/linux/device-mapper.h because this function is used by targets. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm: export struct dm_devMikulas Patocka
Split struct dm_dev in two and publish the part that other targets need in include/linux/device-mapper.h. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm crypt: avoid unnecessary wait when splitting bioMilan Broz
Don't wait between submitting crypt requests for a bio unless we are short of memory. There are two situations when we must split an encrypted bio: 1) there are no free pages; 2) the new bio would violate underlying device restrictions (e.g. max hw segments). In case (2) we do not need to wait. Add output variable to crypt_alloc_buffer() to distinguish between these cases. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm crypt: tidy ctx pendingMilan Broz
Move the initialisation of ctx->pending into one place, at the start of crypt_convert(). Introduce crypt_finished to indicate whether or not the encryption is finished, for use in a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm crypt: fix async inc_pendingMilan Broz
The pending reference count must be incremented *before* the async work is queued to another thread, not after. Otherwise there's a race if the work completes and decrements the reference count before it gets incremented. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm crypt: move dec_pending on error into write_io_submitMilan Broz
Make kcryptd_crypt_write_io_submit() responsible for decrementing the pending count after an error. Also fixes a bug in the async path that forgot to decrement it. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm crypt: remove inc_pending from write_io_submitAlasdair G Kergon
Make the caller reponsible for incrementing the pending count before calling kcryptd_crypt_write_io_submit() in the non-async case to bring it into line with the async case. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm crypt: tidy write loop pendingMilan Broz
Move kcryptd_crypt_write_convert_loop inside kcryptd_crypt_write_convert. This change is needed for a later patch. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm crypt: tidy crypt allocMilan Broz
Factor out crypt io allocation code. Later patches will call it from another place. No functional change. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm crypt: tidy inc pendingMilan Broz
Move io pending to one place. No functional change, usefull to simplify debugging. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm exception store: use chunk_t for_areasMikulas Patocka
Change uint32_t into chunk_t to remove 32-bit limitation on the number of chunks on systems with 64-bit sector numbers. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm exception store: introduce area_location functionMikulas Patocka
Move this logic to a function, because it will be reused later. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm raid1: kcopyd should stop on error if errors handledJonathan Brassow
dm-raid1 is setting the 'DM_KCOPYD_IGNORE_ERROR' flag unconditionally when assigning kcopyd work. kcopyd is responsible for copying an assigned section of disk to one or more other disks. The 'DM_KCOPYD_IGNORE_ERROR' flag affects kcopyd in the following way: When not set: kcopyd will immediately stop the copy operation when an error is encountered. When set: kcopyd will try to proceed regardless of errors and try to continue copying any remaining amount. Since dm-raid1 tracks regions of the address space that are (or are not) in sync and it now has the ability to handle these errors, we can safely enable this optimization. This optimization is conditional on whether mirror error handling has been enabled. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm mpath: remove is_active from struct dm_pathKiyoshi Ueda
This patch moves 'is_active' from struct dm_path to struct pgpath as it does not need exporting. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-10dm mpath: use more error codesBenjamin Marzinski
This patch allows path errors from the multipath ctr function to propagate up to userspace as errno values from the ioctl() call. This is in response to https://www.redhat.com/archives/dm-devel/2008-May/msg00000.html and https://bugzilla.redhat.com/show_bug.cgi?id=444421 The patch only lets through the errors that it needs to in order to get the path errors from parse_path(). Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-10-09Merge branches 'cma', 'cxgb3', 'ehca', 'ipath', 'ipoib', 'mad', 'misc', ↵Roland Dreier
'mlx4', 'mthca' and 'nes' into for-next
2008-10-09RDMA/nes: Fix slab corruptionChien Tung
Referencing cm_node after it is freed via rem_ref_cm_node() causes a slab corruption. There is no need to set cm_node->cm_id to NULL in mini_cm_close(). Signed-off-by: Chien Tung <ctung@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-10-09hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32XAlistair John Strachan
Enable driver checking of the DMI product name (when enabled) on an Abit AT8 32X, instead of falling back to a manual probe. This eliminates false negatives and eventually will help avoid unnecessary bus probes on unsupported mainboards. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Daniel Exner <dex@dragonslave.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32XAlistair John Strachan
The table for the Abit AT8 32X was incorrectly missing an entry for the sixth ("AUX3") fan. Add this entry, exporting the fan reading to userspace. Closes lm-sensors.org ticket #2339. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Daniel Exner <dex@dragonslave.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09hwmon: (it87) Prevent power-off on Shuttle SN68PTJean Delvare
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349 Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09eeepc-laptop: Fix hwmon interfaceCorentin Chary
Creates a name file in the sysfs directory, that is needed for the libsensors library to work. Also rename fan1_pwm to pwm1 and scale its value as needed. This fixes bug #11520: http://bugzilla.kernel.org/show_bug.cgi?id=11520 Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09block: mark bio_split_pool staticDenis ChengRq
Since all bio_split calls refer the same single bio_split_pool, the bio_split function can use bio_split_pool directly instead of the mempool_t parameter; then the mempool_t parameter can be removed from bio_split param list, and bio_split_pool is only referred in fs/bio.c file, can be marked static. Signed-off-by: Denis ChengRq <crquan@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09gdrom: change to use __blk_end_request()Kiyoshi Ueda
This patch converts gdrom to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. gd.transfer is '1' in error cases and '0' in non-error cases, so gdrom hasn't been propagating any error code to the block layer. We can just convert error cases to '-EIO'. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09memstick: change to use __blk_end_request()Kiyoshi Ueda
This patch converts memstick to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09virtio_blk: change to use __blk_end_request()Kiyoshi Ueda
This patch converts virtio_blk to use __blk_end_request() directly so that end_{queued|dequeued}_request() can be removed. Related 'uptodate' argument is converted to 'error'. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09libata: set queue SSD flag for SSD devicesJens Axboe
SSD devices should give an RPM setting of 1 in word 217 of the ID page. If we see such a device, tell the block layer about it. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09floppy: support arbitrary first-sector numbersKeith Wansbrough
The current floppy_struct allows floppies to number sectors starting from 0 or 1. This patch allows arbitrary first-sector numbers - for example, 0xC1 for Amstrad CPC disks. This extends the existing 1-bit field (FD_ZEROBASED, bit 2 of stretch) to 8 bits (FD_SECTMASK, bits 2 to 9). Currently 0x00 denotes a first sector number of 1, and 0x01 denotes a first sector number of 0. We extend this by interpreting FD_SECTMASK as the first sector number with the LSB flipped. Signed-off-by: Keith Wansbrough <keith@lochan.org> Cc: Alain Knaff <alain@linux.lu> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09drivers/block: Use DIV_ROUND_UPJulia Lawall
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09cciss: Fix cciss SCSI rescan code to better notice device changesscameron@beardog.cca.cpqcorp.net
Fix cciss SCSI rescan code to better notice device changes. If you hot-unplug a tape drive, then hot-plug a different tape drive into the same slot in a storage enclosure, the cciss driver wouldn't notice anything had changed, as it was only looking at the LUN address and device type. Now it looks at the inquiry page 0x83 device identifier, and vendor and model strings as well. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09block: Expand Xen blkfront for > 16 xvdChris Lalancette
Until recently, the maximum number of xvd block devices you could attach to a Xen domU was 16. This limitation turned out to be problematic for some users, so it was expanded to handle a much larger number of disks. However, this requires a couple of changes in the way that blkfront scans for disks. This functionality is already present in the Xen linux-2.6.18-xen.hg tree; the attached patch adds this functionality to the mainline xen-blkfront implementation. I successfully tested it on a 2.6.25 tree, and build tested it on 2.6.27-rc3. Signed-off-by: Chris Lalancette <clalance@redhat.com> Acked-by: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09sg: remove unnecessary blk_rq_unmap_userFUJITA Tomonori
blk_rq_unmap_user in sg_finish_rem_req can take care of all the cases. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09sg: remove sg_read_xferFUJITA Tomonori
sg_read_xfer was used to copy data to user space for READ commands. blk_rq_unmap_user does the job so sg_read_xfer does nothing useful. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09sg: remove sg_write_xferFUJITA Tomonori
sg_write_xfer was used to copy data from user space for WRITE commands. blk_rq_map_user_iov and blk_rq_map_user do the job so sg_write_xfer does nothing useful. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09sg: incorporate sg_build_direct into sg_start_reqFUJITA Tomonori
Calling blk_rq_map_user() at a single place is better than at different two places. It makes the code more understandable. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09sg: remove __sg_start_reqFUJITA Tomonori
__sg_start_req() was used temporarily to call blk_get_request() during converting sg to use the block layer. Now sg always calls blk_get_request() so we can move blk_get_request() to sg_start_req(). We don't need __sg_start_req anymore. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 10:35:40 +0000