aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-08-03RDMA/cxgb3: Always call low level send function via cxgb3_ofld_send()Steve Wise
This avoids deadlocks. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB: Move the macro IB_UMEM_MAX_PAGE_CHUNK() to umem.cDotan Barak
After moving the definition of struct ib_umem_chunk from ib_verbs.h to ib_umem.h there isn't any reason for the macro IB_UMEM_MAX_PAGE_CHUNK to stay in ib_verbs.h. Move the macro to umem.c, the only place where it is used. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: Fix address handle leak in mad_rmppSean Hefty
The address handle associated with dual-sided RMPP direction switch ACKs is never destroyed. Free the AH for ACKs which fall into this category. Problem was reported by Dotan Barak <dotanb@dev.mellanox.co.il>. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: agent_send_response() should be voidHal Rosenstock
Nothing looks at the return value of agent_send_response(), so there's no point in returning anything. Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: Fix memory leak in switch handling in ib_mad_recv_done_handler()Hal Rosenstock
If agent_send_response() returns an error, we shouldn't do anything differently than if it succeeds; setting response to NULL just means that the response buffer gets leaked. Signed-off-by: Suresh Shelvapille <suri@baymicrosystems.com> Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/mad: Fix error path if response alloc fails in ib_mad_recv_done_handler()Hal Rosenstock
If ib_mad_recv_done_handler() fails to allocate response, then it just printed a warning and continued, which leads to an oops if the MAD is being handled for a switch device, because the switch code uses response without checking for NULL. Fix this by bailing out of the function if the allocation fails. Signed-off-by: Suresh Shelvapille <suri@baymicrosystems.com> Signed-off-by: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/sa: Don't need to check for default P_Key twiceRoland Dreier
Now that ib_find_pkey() ignores the membership bit of P_Keys, there's no need for ib_sa to look for both 0x7fff and 0xffff in a port's P_Key table. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-03IB/core: Ignore membership bit in ib_find_pkey()Moni Shoua
ib_find_pkey() is used as a replacement for ib_find_cached_pkey(), and the original function ignored the membership bit when searching for a P_Key, so ib_find_pkey() should ignore the bit too. In particular, IPoIB turns on the P_Key membership bit of limited membership P_Keys when creating a child interface and looks for the full membership P_key. This broke if a port was a partial member of a partition when IPoIB switched from ib_find_cached_pkey() to ib_find_pkey(), and this change fixes things again. Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-02[MTD] [NAND] nand_base.c: fix type of eccpos pointerBen Dooks
The nand_base.c driver implicitly casts the uint32_t eccpos array to 'int *', which is not only not guaranteed to be the same sign as the source, but is not guaranteed to be the same size. Fix by changing nand_base.c to use uint32_t referencing the eccpos fields. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-02[MTD] [NAND] at91_nand rdy_pin fixIvan Kuten
The patch below fixes nand driver for AT91 boards which do not have NAND R/B signal connected to gpio (rdy_pin is not connected). Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-02[MTD] [NAND] fix race in nand_base.cArtem Bityutskiy
When we mark block bad we have to get chip because this involves writing to the page's OOB. We hit this bug in UBI - we observed random obscure crashes when it marks block bad from the background thread and there is some parallel task which utilizes flash. This patch also adds a TODO note about BBT table protection which it seems does not exist. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-02[MTD] [NAND] Fix refactoring of EDB7312 hwcontrol function.Roland Stigge
The patch ensures that the current code (kernel 2.6.22) uses the bits like the code prior to the refactoring. The variable "bits" is employed in a useful way now. Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-02[MTD] Fix potential leak in rfd_ftl_add_mtdFlorin Malita
This fixes a leak in the !mtd->erasesize error path (Coverity 1765). Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-08-02HID: Never call hid_free_buffers() when usbhid_device has been freedJiri Kosina
We can't call hid_free_buffers() when the underlying usbhid_device has already been freed. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: fix memory leak of usbhid_deviceJiri Kosina
Add forgotten freeing of usbhid_device structure. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: fix a possible NULL pointer dereference when we fail to allocate memoryJesper Juhl
If, in usb_hid_configure(), we fail to allocate storage for 'usbhid', "if (!(usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL)))", then we'll jump to the 'fail:' label where we have this code: usb_free_urb(usbhid->urbin); usb_free_urb(usbhid->urbout); usb_free_urb(usbhid->urbctrl); Since we got here because we couldn't allocate storage for 'usbhid', what we have here is a NULL pointer dereference - ouch... This patch solves that little problem by adding a new 'fail_no_usbhid:' label after the problematic calls to usb_free_urb() and jumps to that one instead, in the problem case. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: add ASUS LCM to the blacklistChristian Lamparter
Some of ASUS' notebooks (e.g G Series) include a tiny oled display, which is attached to an internal USB bus. Unfortunatly the device reports a wrong DeviceDescriptor and is therefore identified as a HID device... Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02USB HID: Add all Logitech Harmonies to blacklistPhil Dibowitz
This patch adds the entire range of Logitech's ProductIDs that are reserved for their Harmony remotes. The in-kernel HID driver can't do anything with these, and now there is a GPL user-space application that can handle them: http://www.sf.net/projects/harmonycontrol Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-02HID: remove the Applie IR sensor from the hid_blacklistTino Keitel
The IR sensor in some newer Apple computers has no other driver in the kernel, yet. However, the macmini driver in lirc requires a HID device for the IR sensor. Cc: Soeren Sonnenburg <kernel@nn7.de> Signed-off-by: Tino Keitel <tino.keitel@tikei.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2007-08-01Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: scc_pata: PIO fixes piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2) jmicron: PIO fixes it8213: PIO fixes (take 2) cs5535: PIO fixes cs5520: fix PIO auto-tuning in ->ide_dma_check method drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzalloc drivers/ide/arm/icside.c: kmalloc + memset conversion to kzalloc ide: eliminate warnings in ide-tape.c ide: fix runtogether printk's in cmd64x IDE driver sis5513: Add FSC Amilo A1630 PCI subvendor/dev to laptops alim15x3: Correct HP detect ide: Fix an overrun found in the CS5535 IDE driver
2007-08-01scc_pata: PIO fixesBartlomiej Zolnierkiewicz
* Use pio == 255 == "auto-tune" in scc_config_drive_for_dma() instead of forcing PIO4 on PIO fallback. Fix comment while at it. * Rename scc_tuneproc() to scc_tune_pio() and add scc_tuneproc() wrapper. Move finding of the best PIO mode and setting of transfer mode on the device to the new wrapper. * Fix scc_tune_chipset() to tune PIO modes. Do a small cleanup while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)Bartlomiej Zolnierkiewicz
* Don't call {piix,slc90e66}_dma_2_pio() for PIO modes in {piix,slc90e66}_tune_chipset(). * Add PIO1 handling to {piix,slc90e66}_tune_chipset(). * Bump driver version. v2: * Remove PIO modes from {piix,slc90e66}_dma_2_pio(), they are no longer needed there (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01jmicron: PIO fixesBartlomiej Zolnierkiewicz
* Set transfer mode on the device in jmicron_tuneproc(), also add pio == 255 == "auto-tune" handling. * Use jmicron_tuneproc() in jmicron_config_drive_for_dma(). * Remove no longer needed config_jmicron_chipset_for_pio(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01it8213: PIO fixes (take 2)Bartlomiej Zolnierkiewicz
* Rename it8213_tuneproc() to it8213_tune_pio() and add it8213_tuneproc() wrapper. Move finding of the best PIO mode to the new wrapper. * Add setting of transfer mode on the device to it8213_tuneproc(). * Don't call it8213_dma_2_pio() for PIO modes in it8213_tune_chipset(). * Use it8213_tuneproc() in it8213_config_drive_for_dma(). v2: * Remove PIO modes from it8213_dma_2_pio(), they are no longer needed there (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01cs5535: PIO fixesBartlomiej Zolnierkiewicz
* Fix cs5535_tuneproc() to pass PIO transfer mode value instead of PIO mode number to cs5535_set_speed() (fixes random PIO timings being programmed and a possible OOPS). Do a little cleanup while at it. * Fix cs5535_set_speed() to check if the mate device is present (fixes PIO0 taskfile timings being used if there is no other device on the cable). * Use cs5535_tuneproc() in cs5535_dma_check(). The old code had the same issue as cs5535_tuneproc() and add additionally caused 0x00-0x04 transfer mode values (== default PIO, default PIO w/ IORDY + two invalid values) being set on the device instead of values 0x08-0x0c (XFER_PIO_[0,4]). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01cs5520: fix PIO auto-tuning in ->ide_dma_check methodBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
drivers/scsi/ide-scsi.c | 34642 -> 34536 (-106 bytes) drivers/scsi/ide-scsi.o | 171728 -> 171524 (-204 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01drivers/ide/arm/icside.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
Is this a bug? In original verison memset cleared sizeof(state) bytes instead of sizeof(*state). If it was intentional then this patch is invalid. If not intentional -> valid :) Please review. Bart: Yes, it is a bug so this patch is a valid bugfix. :-) drivers/ide/arm/icside.c | 18883 -> 18849 (-34 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: eliminate warnings in ide-tape.cStephen Rothwell
drivers/ide/ide-tape.c: In function '__idetape_kmalloc_stage': drivers/ide/ide-tape.c:2588: warning: large integer implicitly truncated to unsigned type drivers/ide/ide-tape.c:2616: warning: large integer implicitly truncated to unsigned type b_size in struct idetape_bh is an unsigned short. We sometimes assigne PAGE_SIZE to it and PAGE_SIZE can be 64K or larger, so make it a u32. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: fix runtogether printk's in cmd64x IDE driverMeelis Roos
Fix a couple of runtogether printks in cmd64x.c IDE driver by adding proper newlines. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01sis5513: Add FSC Amilo A1630 PCI subvendor/dev to laptopsDavid Lamparter
Recognise the FSC Amilo A1630's incarnation of a SiS5513 chip as laptop to get UDMA100 support. Signed-off-by: David Lamparter <equinox@diac24.net> Cc: Lionel Bouton <Lionel.Bouton@inet6.fr> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01alim15x3: Correct HP detectBartlomiej Zolnierkiewicz
Direct port of Alan's fix for pata_ali. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: Fix an overrun found in the CS5535 IDE driverJordan Crouse
As found by the Coverity checker, and reported by Adrian Bunk, this fixes a overrun error in the CS5535 IDE driver. Somebody got a little excited with the if() statement - the CS5535 only supports UDMA 0-4. Bart: Not a bug per se since the upper layer will never feed this function with speed > XFER_UDMA_4 (thanks to ->ultra_mask being set to 0x1f). Worth fixing anyway. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01pata_sis: fix MWDMA for <= UDMA66 chipsets and UDMA for UDMA33 chipsetsBartlomiej Zolnierkiewicz
* Fix MWDMA timings setup in sis_old_set_dmamode() and sis_66_set_dmamode(). The old timings were overclocked (even worse behavior than sis5513 IDE driver which depends on BIOS to program correct timings), the new timings are taken from the datasheet (they match timings from ATA spec). * Fix UDMA timings setup in sis_old_set_dmamode(). Misplaced pci_write_config_word() call resulted in UDMA timings never being set. * Fix comments for sis_133_early_set_dmamode() and sis_133_set_dmamode(): - only the former function handles early SiS 961 bridges - both functions lack MWDMA timings setup * Fix typos in sis_100_set_piomode() and sis_133_set_piomode() comments. * Bump driver version. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01libata: blacklist SAMSUNG HD401LJ / ZZ100-15 for NCQTejun Heo
SAMSUNG HD401LJ / ZZ100-15 does spurious completion of NCQ commands. Disable NCQ. Reported by Ulrich in bugzilla #8805. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Ulrich <stellplatz-nr.13a@datenparkplatz.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01ata_piix: add Tecra M3 to broken suspend blacklistTejun Heo
Add Tecra M3 to the broken suspend blacklist. Tecra M3 doesn't have proper DMI_PRODUCT_NAME but has an OEM_STRING instead. Match it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01ata_piix: implement piix_borken_suspend()Tejun Heo
Separate out broken suspend blacklist matching into piix_broken_suspend(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01pci: rename __pci_reenable_device() to pci_reenable_device()Tejun Heo
Rename __pci_reenable_device() to pci_reenable_device(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01libata-sff; Unbreak non DMA capable controllers againAlan Cox
Seems nobody else is checking/testing this case as it keeps getting horked. If we have no BAR4 mapping on an SFF controller this is *NOT* an error, it just means it isn't doing BMDMA. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01pata_cmd64x: Correct the speed rangesAlan Cox
I must have been half asleep when doing the original code Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits) [WATCHDOG] Fix pcwd_init_module crash [WATCHDOG] ICH9 support for iTCO_wdt [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges [WATCHDOG] 631xESB/632xESB support for iTCO_wdt [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY [WATCHDOG] Return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support [WATCHDOG] mv64x60_wdt: Get register address from platform data [WATCHDOG] mv64x60_wdt: set up platform_device in platform code [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt [WATCHDOG] s3c2410_wdt: fixup after arch include moves [WATCHDOG] git-watchdog-typo ...
2007-07-31Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (50 commits) [MIPS] Add smp_call_function_single() [MIPS] thread_info.h: kmalloc + memset conversion to kzalloc [MIPS] Kexec: Fix several 64-bit bugs. [MIPS] Kexec: Fix several warnings. [MIPS] DDB5477: Remove support [MIPS] Fulong: Remove unneeded header file [MIPS] Cobalt: Enable UART on RaQ1 [MIPS] Remove unused GROUP_TOSHIBA_NAMES [MIPS] remove some duplicate includes [MIPS] Oprofile: Fix rm9000 performance counter handler [MIPS] Use -Werror on subdirectories which build cleanly. [MIPS] Yosemite: Fix warning. [MIPS] PMON: Fix cpustart declaration. [MIPS] Yosemite: Only build ll_ht_smp_irq_handler() if HYPERTRANSPORT. [MIPS] Yosemite: Fix build error due to undeclared titan_mailbox_irq(). [MIPS] Yosemite: Don't declare titan_mailbox_irq() as asmlinkage. [MIPS] Yosemite: Fix warnings in i2c-yoesmite by deleting the unused code. [MIPS] Delete unused arch/mips/gt64120/common/ [MIPS] Fix build warning in unaligned load/store emulator. [MIPS] IP32: Don't ignore request_irq's return value. ...
2007-07-31Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: fscher read control bugfix hwmon: (adm1031) Fix broken links in documentation hwmon: make abituguru3_read_increment_offset() static hwmon: Fix regression caused by typo in lm90.c hwmon: (applesmc) add temperature sensors set for Macbook hwmon: fscher control update bugfix hwmon: fix dme1737 temp fault attribute hwmon: Add missing __devexit tags in various drivers hwmon: clean up duplicate includes hwmon: fix lm78 detection regression hwmon: fix array overruns in lm93.c hwmon: add support for THMC50 and ADM1022
2007-07-31ACPI: delete CONFIG_ACPI_PROCFS_SLEEP (again)Len Brown
CONFIG_ACPI_PROCFS_SLEEP is a NO-OP -- delete it (again). Apparently 296699de6bdc717189a331ab6bbe90e05c94db06 creating CONFIG_SUSPEND and CONFIG_PM_SLEEP was based on an out-dated version of drivers/acpi/Kconfig, as it erroneously restored this recently deleted config option. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) [RTNETLINK]: Fix warning for !CONFIG_KMOD [IPV4] ip_options.c: kmalloc + memset conversion to kzalloc [DECNET]: kmalloc + memset conversion to kzalloc [NET]: ethtool_perm_addr only has one implementation [NET]: ethtool ops are the only way [PPPOE]: Improve hashing function in hash_item(). [XFRM]: State selection update to use inner addresses. [IPSEC]: Ensure that state inner family is set [TCP]: Bidir flow must not disregard SACK blocks for lost marking [TCP]: Fix ratehalving with bidirectional flows [PPPOL2TP]: Add CONFIG_INET Kconfig dependency. [NET]: Page offsets and lengths need to be __u32. [AF_UNIX]: Make code static. [NETFILTER]: Make nf_ct_ipv6_skip_exthdr() static. [PKTGEN]: make get_ipsec_sa() static and non-inline [PPPoE]: move lock_sock() in pppoe_sendmsg() to the right location [PPPoX/E]: return ENOTTY on unknown ioctl requests [IPV6]: ipv6_addr_type() doesn't know about RFC4193 addresses. [NET]: Fix prio_tune() handling of root qdisc. [NET]: Fix sch_api to properly set sch->parent on the root. ...
2007-07-31Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [BBC_I2C]: kmalloc + memset conversion to kzalloc [BBC_ENVCTRL]: kmalloc + memset conversion to kzalloc [SPARC]: Fix exec failures on sun4c. [SPARC] Videopix Frame Grabber: Fix unreleased lock in vfc_debug() [SPARC64]: Add missing dma_get_cache_alignment(). [SUNLANCE]: Fix sparc32 crashes by using of_*() interfaces.
2007-07-31rtc-m48t59 driver NO_IRQ mode fixupMark Zhan
Since irq in m48t59_private struct is defined as 'unsigned int', which will make the following if sentence to be never true: if (m48t59->irq < 0) m48t59->irq = NO_IRQ; And thus it will make the m48t59_rtc_probe() is failed when the driver is working in a no irq mode: Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Use menuconfig objects: RTCJan Engelhardt
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Remove 'isdn_* is defined but unused' warningsCharlie Shepherd
Move the #ifdef guard above these functions to remove the warnings. Signed-off-by: Charlie Shepherd <masterdriverz@gentoo.org> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31spi device setup gets better error checkingDavid Brownell
This updates some error reporting paths in SPI device setup: - Move validation logic for SPI chipselects to spi_new_device(), which is where it should always have been. - In spi_new_device(), emit error messages if the device can't be created. This is LOTS better than a silent failure; though eventually, the calling convention should probably change to use the <linux/err.h> conventions. - Includes one previously-missing check: SPI masters must always have at least one chipselect, even for dedicated busses which always keep it selected! It also adds a FIXME (IDR for dynamic ID allocation) so the issue doesn't live purely in my mailbox. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 11:33:22 +0000