aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-11-16acpi: fix oops in acpi_system_wakeup_device_seq_showLinus Torvalds
Commit 0794469da3f7b2093575cbdfc1108308dd3641ce: ("ACPI: struct device - replace bus_id with dev_name(), dev_set_name()") introduced a bug by testing 'dev_name(ldev)' instead of 'ldev->bus' for NULL when printing out the bus information. So if ldev->bus was NULL, we'd oops. Reported-and-tested-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Len Brown <len.brown@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: don't grab devices with no input HID: fix radio-mr800 hidquirks HID: fix kworld fm700 radio hidquirks HID: fix start/stop cycle in usbhid driver HID: use single threaded work queue for hid_compat HID: map macbook keys for "Expose" and "Dashboard" HID: support for new unibody macbooks HID: fix locking in hidraw_open()
2008-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: ensure correct logging in do_io_probe pcmcia: add another pata/ide ID pcmcia: add braces in error path pcmcia: struct device - replace bus_id with dev_name(), dev_set_name() pcmcia: setup resource information for pseudo multifunction devices. pcmcia: fix indentation & braces disagreement - add braces
2008-11-15LIS3LV02Dx: remove unused #include <version.h>Huang Weiyi
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/hwmon/lis3lv02d.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15Merge branch 'sh/for-2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: Reorder the SCxTDR write after the TDxE clear. sh: __copy_user function can corrupt the stack in case of exception sh: Fixed the TMU0 reload value on resume sh: Don't factor in PAGE_OFFSET for valid_phys_addr_range() check. sh: early printk port type fix i2c: fix i2c-sh_mobile rx underrun sh: Provide a sane valid_phys_addr_range() to prevent TLB reset with PMB. usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB fix sci type for SH7723 serial: sh-sci: fix cannot work SH7723 SCIFA sh: Handle fixmap TLB eviction more coherently.
2008-11-15Merge branch 'doc-subdirs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs * 'doc-subdirs' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs: Create/use more directory structure in the Documentation/ tree.
2008-11-15Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (9624): CVE-2008-5033: fix OOPS on tvaudio when controlling bass/treble V4L/DVB (9623): tvaudio: Improve debug msg by printing something more human V4L/DVB (9622): tvaudio: Improve comments and remove a unneeded prototype V4L/DVB (9621): Avoid writing outside shadow.bytes[] array V4L/DVB (9620): tvaudio: use a direct reference for chip description V4L/DVB (9619): tvaudio: update initial comments V4L/DVB (9618): tvaudio: add additional logic to avoid OOPS V4L/DVB (9617): tvtime: remove generic_checkmode callback V4L/DVB (9616): tvaudio: cleanup - group all callbacks together V4L/DVB (9615): tvaudio: instead of using a magic number, use ARRAY_SIZE V4L/DVB (9613): tvaudio: fix a memory leak
2008-11-15Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] fix s390x_newuname [S390] dasd: log sense for fatal errors [S390] cpu topology: fix locking [S390] cio: Fix refcount after moving devices. [S390] ftrace: fix kernel stack backchain walking [S390] ftrace: disable tracing on idle psw [S390] lockdep: fix compile bug [S390] kvm_s390: Fix oops in virtio device detection with "mem=" [S390] sclp: emit error message if assign storage fails [S390] Fix range for add_active_range() in setup_memory()
2008-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] dpt_i2o: fix transferred data length for scsi_set_resid() [SCSI] scsi_error regression: Fix idempotent command handling [SCSI] zfcp: Fix hexdump data in s390dbf traces [SCSI] zfcp: fix erp timeout cleanup for port open requests [SCSI] zfcp: Wait for port scan to complete when setting adapter online [SCSI] zfcp: Fix cast warning [SCSI] zfcp: Fix request list handling in error path [SCSI] zfcp: fix mempool usage for status_read requests [SCSI] zfcp: fix req_list_locking. [SCSI] zfcp: Dont clear reference from SCSI device to unit [SCSI] qla2xxx: Update version number to 8.02.01-k9. [SCSI] qla2xxx: Return a FAILED status when abort mailbox-command fails. [SCSI] qla2xxx: Do not honour max_vports from firmware for 2G ISPs and below. [SCSI] qla2xxx: Use pci_disable_rom() to manipulate PCI config space. [SCSI] qla2xxx: Correct Atmel flash-part handling. [SCSI] megaraid: fix mega_internal_command oops
2008-11-15misc: C2port needs <linux/sched.h>Geert Uytterhoeven
m68k allmodconfig: | drivers/misc/c2port/core.c: In function 'c2port_reset': | drivers/misc/c2port/core.c:73: error: dereferencing pointer to incomplete type | drivers/misc/c2port/core.c: In function 'c2port_strobe_ck': | drivers/misc/c2port/core.c:91: error: dereferencing pointer to incomplete type Include <linux/sched.h> to fix it, as m68k's local_irq_enable() needs to know about struct task_struct. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-15Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: improve phantom device detection
2008-11-15[SCSI] dpt_i2o: fix transferred data length for scsi_set_resid()Miquel van Smoorenburg
dpt_i2o.c::adpt_i2o_to_scsi() reads the value at (reply+5) which should contain the length in bytes of the transferred data. This would be correct if reply was a u32 *. However it is a void * here, so we need to read the value at (reply+20) instead. The value at (reply+5) is usually 0xff0000, which is apparently 'large enough' and didn't cause any trouble until 2.6.27 where commit 427e59f09fdba387547106de7bab980b7fff77be Author: James Bottomley <James.Bottomley@HansenPartnership.com> Date: Sat Mar 8 18:24:17 2008 -0600 [SCSI] make use of the residue value caused this to become visible through e.g. iostat -x . Signed-off-by: Miquel van Smoorenburg <mikevs@xs4all.net> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-11-14libata: improve phantom device detectionTejun Heo
Currently libata uses four methods to detect device presence. 1. PHY status if available. 2. TF register R/W test (only promotes presence, never demotes) 3. device signature after reset 4. IDENTIFY failure detection in SFF state machine Combination of the above works well in most cases but recently there have been a few reports where a phantom device causes unnecessary delay during probe. In both cases, PHY status wasn't available. In one case, it passed #2 and #3 and failed IDENTIFY with ATA_ERR which didn't qualify as #4. The other failed #2 but as it passed #3 and #4, it still caused failure. In both cases, phantom device reported diagnostic failure, so these cases can be safely worked around by considering any !ATA_DRQ IDENTIFY failure as NODEV_HINT if diagnostic failure is set. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-14Create/use more directory structure in the Documentation/ tree.Randy Dunlap
Create Documentation/blockdev/ sub-directory and populate it. Populate the Documentation/serial/ sub-directory. Move MSI-HOWTO.txt to Documentation/PCI/. Move ioctl-number.txt to Documentation/ioctl/. Update all relevant 00-INDEX files. Update all relevant Kconfig files and source files. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2008-11-14[S390] dasd: log sense for fatal errorsStefan Haberland
The logging of sense data for fatal errors was accidentally removed during Hyper PAV implementation. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-14[S390] cio: Fix refcount after moving devices.Cornelia Huck
In ccw_device_move_to_orphanage(), a replacing ccw_device is searched via get_{disc,orphaned}_ccwdev_by_dev_id() which obtain a reference on the returned ccw_device. This reference must be given up again after the device has been moved to its new parent. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-14[S390] kvm_s390: Fix oops in virtio device detection with "mem="Christian Borntraeger
The current virtio model on s390 has the descriptor page above the main memory. The guest virtio detection will oops if the mem= parameter is used to reduce/change the memory size. We have to use real_memory_size instead of max_pfn to detect the virtio descriptor pages. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2008-11-14[S390] sclp: emit error message if assign storage failsHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-14V4L/DVB (9624): CVE-2008-5033: fix OOPS on tvaudio when controlling bass/trebleMauro Carvalho Chehab
This bug were supposed to be fixed by 5ba2f67afb02c5302b2898949ed6fc3b3d37dcf1, where a call to NULL happens. Not all tvaudio chips allow controlling bass/treble. So, the driver has a table with a flag to indicate if the chip does support it. Unfortunately, the handling of this logic were broken for a very long time (probably since the first module version). Due to that, an OOPS were generated for devices that don't support bass/treble. This were the resulting OOPS message before the patch, with debug messages enabled: tvaudio' 1-005b: VIDIOC_S_CTRL BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<00000000>] *pde = 22fda067 *pte = 00000000 Oops: 0000 [#1] SMP Modules linked in: snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_hwdep snd soundcore tuner_simple tuner_types tea5767 tuner tvaudio bttv bridgebnep rfcomm l2cap bluetooth it87 hwmon_vid hwmon fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirrordm_multipath dm_mod configfs videodev v4l1_compat ir_common 8139cp compat_ioctl32 v4l2_common 8139too videobuf_dma_sg videobuf_core mii btcx_risc tveeprom i915 button snd_page_alloc serio_raw drm pcspkr i2c_algo_bit i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support sr_mod cdrom sg ata_generic pata_acpi ata_piix libata sd_mod scsi_mod ext3 jbdmbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: soundcore] Pid: 15413, comm: qv4l2 Not tainted (2.6.25.14-108.fc9.i686 #1) EIP: 0060:[<00000000>] EFLAGS: 00210246 CPU: 0 EIP is at 0x0 EAX: 00008000 EBX: ebd21600 ECX: e2fd9ec4 EDX: 00200046 ESI: f8c0f0c4 EDI: f8c0f0c4 EBP: e2fd9d50 ESP: e2fd9d2c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process qv4l2 (pid: 15413, ti=e2fd9000 task=ebe44000 task.ti=e2fd9000) Stack: f8c0c6ae e2ff2a00 00000d00 e2fd9ec4 ebc4e000 e2fd9d5c f8c0c448 00000000 f899c12a e2fd9d5c f899c154 e2fd9d68 e2fd9d80 c0560185 e2fd9d88 f8f3e1d8 f8f3e1dc ebc4e034 f8f3e18c e2fd9ec4 00000000 e2fd9d90 f899c286 c008561c Call Trace: [<f8c0c6ae>] ? chip_command+0x266/0x4b6 [tvaudio] [<f8c0c448>] ? chip_command+0x0/0x4b6 [tvaudio] [<f899c12a>] ? i2c_cmd+0x0/0x2f [i2c_core] [<f899c154>] ? i2c_cmd+0x2a/0x2f [i2c_core] [<c0560185>] ? device_for_each_child+0x21/0x49 [<f899c286>] ? i2c_clients_command+0x1c/0x1e [i2c_core] [<f8f283d8>] ? bttv_call_i2c_clients+0x14/0x16 [bttv] [<f8f23601>] ? bttv_s_ctrl+0x1bc/0x313 [bttv] [<f8f23445>] ? bttv_s_ctrl+0x0/0x313 [bttv] [<f8b6096d>] ? __video_do_ioctl+0x1f84/0x3726 [videodev] [<c05abb4e>] ? sock_aio_write+0x100/0x10d [<c041b23e>] ? kmap_atomic_prot+0x1dd/0x1df [<c043a0c9>] ? enqueue_hrtimer+0xc2/0xcd [<c04f4fa4>] ? copy_from_user+0x39/0x121 [<f8b622b9>] ? __video_ioctl2+0x1aa/0x24a [videodev] [<c04054fd>] ? do_notify_resume+0x768/0x795 [<c043c0f7>] ? getnstimeofday+0x34/0xd1 [<c0437b77>] ? autoremove_wake_function+0x0/0x33 [<f8b62368>] ? video_ioctl2+0xf/0x13 [videodev] [<c048c6f0>] ? vfs_ioctl+0x50/0x69 [<c048c942>] ? do_vfs_ioctl+0x239/0x24c [<c048c995>] ? sys_ioctl+0x40/0x5b [<c0405bf2>] ? syscall_call+0x7/0xb [<c0620000>] ? cpuid4_cache_sysfs_exit+0x3d/0x69 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:e2fd9d2c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9623): tvaudio: Improve debug msg by printing something more humanMauro Carvalho Chehab
Before the patch, the used ioctl were printed as an hexadecimal code, hard to be understand without consulting the way _IO macros work. Instead, use the V4L default handler for printing such errors into a way that would be easier to understand. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9622): tvaudio: Improve comments and remove a unneeded prototypeMauro Carvalho Chehab
Some comments are not clear enough. Improve it to allow a better understanding of the driver behavior. While there, remove an unneeded struct prototype. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9621): Avoid writing outside shadow.bytes[] arrayMauro Carvalho Chehab
There were no check about the limits of shadow.bytes array. This offers a risk of writing values outside the limits, overriding other data areas. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9620): tvaudio: use a direct reference for chip descriptionMauro Carvalho Chehab
Instead of storing the pointer for the proper entry at chip description table, the driver were storing an indirect reference, by using an index. Better to reference directly the data. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9619): tvaudio: update initial commentsMauro Carvalho Chehab
A driver used on several bttv boards since 2000 is not experimental anymore ;) Remove it from the comments. While there, update copyrights addind a quick note about the "recent" updates since 2005. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9618): tvaudio: add additional logic to avoid OOPSMauro Carvalho Chehab
This patch checks for volume, bass, treble, set mode and get mode callbacks before actually enabling the code that would use them. Instead of aborting the driver for load, this patch will allow it to load with a reduced number of functionatities. This prevents OOPS if some board entry is missing a needed callback. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9617): tvtime: remove generic_checkmode callbackMauro Carvalho Chehab
generic_checkmode() were called, via a callback, for some tvaudio chips. There's just one callback code used on all those boards. So, it makes no sense on keeping this as a callback. Since there were some OOPS reported on tvaudio on kerneloops.org, this patch removes this callback, adding the code at the only place were it is called: inside chip_tread. A flag were added to indicate the need for a kernel thread to set stereo mode on cards that needs it. Using this more direct approach simplifies the code, making it more robust against human errors. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9616): tvaudio: cleanup - group all callbacks togetherMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9615): tvaudio: instead of using a magic number, use ARRAY_SIZEMauro Carvalho Chehab
Also, the default standard is the first one. So, fix the comment at the array. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14V4L/DVB (9613): tvaudio: fix a memory leakMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-14HID: don't grab devices with no inputJiri Slaby
Some devices have no input interrupt endpoint. These won't be handled by usbhid, but currently they are not refused and reside on hid bus. Perform this checking earlier so that we refuse to control such a device early enough (and not pass it to the hid bus at all). Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (25 commits) USB: net: asix: add support for Cables-to-Go USB Ethernet adapter USB: gadget: cdc-acm deadlock fix USB: EHCI: fix divide-by-zero bug USB: EHCI: fix handling of dead controllers usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB ub: stub pre_reset and post_reset to fix oops USB: SISUSB2VGA driver: add 0x0711, 0x0903 usb: unusual devs patch for Nokia 7610 Supernova USB: remove optional bus bindings in isp1760, fixing runtime warning + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm tree USB: storage: adjust comment in Kconfig USB: Fix PS3 USB shutdown problems USB: unusual_devs entry for Argosy USB mass-storage interface USB: cdc-acm.c: fix recursive lock in acm_start_wb error path USB: CP2101 Add device ID for AMB2560 USB: mention URB_FREE_BUFFER in usb_free_urb documentation USB: Add YISO u893 usb modem vendor and product IDs to option driver usb: musb: fix BULK request on different available endpoints usb: musb: fix debug global variable name usb: musb: Removes compilation warning in gadget mode ...
2008-11-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm: avoid destroying table in dm_any_congested dm: move pending queue wake_up end_io_acct dm mpath: warn if args ignored dm mpath: avoid attempting to activate null path dm stripe: fix init failure dm raid1: flush workqueue before destruction
2008-11-13dm: avoid destroying table in dm_any_congestedChandra Seetharaman
dm_any_congested() just checks for the DMF_BLOCK_IO and has no code to make sure that suspend waits for dm_any_congested() to complete. This patch adds such a check. Without it, a race can occur with dm_table_put() attempting to destroying the table in the wrong thread, the one running dm_any_congested() which is meant to be quick and return immediately. Two examples of problems: 1. Sleeping functions called from congested code, the caller of which holds a spin lock. 2. An ABBA deadlock between pdflush and multipathd. The two locks in contention are inode lock and kernel lock. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13dm: move pending queue wake_up end_io_acctMikulas Patocka
This doesn't fix any bug, just moves wake_up immediately after decrementing md->pending, for better code readability. It must be clear to anyone manipulating md->pending to wake up the queue if md->pending reaches zero, so move the wakeup as close to the decrementing as possible. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13dm mpath: warn if args ignoredChandra Seetharaman
Currently dm ignores the parameters provided to hardware handlers without providing any notifications to the user. This patch just prints a warning message so that the user knows that the arguments are ignored. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13dm mpath: avoid attempting to activate null pathChandra Seetharaman
Path activation code is called even when the pgpath is NULL. This could lead to a panic in activate_path(). Such a panic is seen in -rt kernel. This problem has been there before the pg_init() was moved to a workqueue. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13dm stripe: fix init failureHeinz Mauelshagen
Don't proceed if dm_stripe_init() fails to register itself as a dm target. Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2008-11-13dm raid1: flush workqueue before destructionMikulas Patocka
We queue work on keventd queue --- so this queue must be flushed in the destructor. Otherwise, keventd could access mirror_set after it was freed. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
2008-11-13USB: net: asix: add support for Cables-to-Go USB Ethernet adapterJason Cooper
Add support to drivers/net/usb/asix.c for the Cables-to-Go "USB 2.0 to 10/100 Ethernet Adapter". USB id 0b95:772a. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: gadget: cdc-acm deadlock fixDavid Brownell
This fixes a deadlock appearing with some USB peripheral drivers when running CDC ACM gadget code. The newish (2.6.27) CDC ACM event notification mechanism sends messages (IN to the host) which are short enough to fit in most FIFOs. That means that with some peripheral controller drivers (evidently not the ones used to verify the notification code!!) the completion callback can be issued before queue() returns. The deadlock would come because the completion callback and the event-issuing code shared a spinlock. Fix is trivial: drop that lock while queueing the message. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: EHCI: fix divide-by-zero bugAlan Stern
This patch (as1164) fixes a bug in the EHCI scheduler. The interval value it uses is already in linear format, not logarithmically coded. The existing code can sometimes crash the system by trying to divide by zero. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: EHCI: fix handling of dead controllersAlan Stern
This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USBYoshihiro Shimoda
When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13ub: stub pre_reset and post_reset to fix oopsPete Zaitcev
Due to recent changes to usb_reset_device, the following hang occurs: events/0 D 0000000000000000 0 6 2 ffff880037477cc0 0000000000000046 ffff880037477c50 ffffffff80237434 ffffffff80574c80 00000001000a015c 0000000000000286 ffff8800374757d0 ffff88002a31c860 ffff880037475a00 0000000036779140 ffff880037475a00 Call Trace: [<ffffffff80237434>] try_to_del_timer_sync+0x52/0x5b [<ffffffff8026f86c>] dma_pool_free+0x1a7/0x1ec [<ffffffffa02a928a>] ub_disconnect+0x8e/0x1ad [ub] [<ffffffff802407c9>] autoremove_wake_function+0x0/0x2e [<ffffffff80378959>] usb_unbind_interface+0x5c/0xb7 [<ffffffff8036ab70>] __device_release_driver+0x95/0xbd [<ffffffff8036ac70>] device_release_driver+0x21/0x2d [<ffffffff803789f8>] usb_driver_release_interface+0x44/0x83 [<ffffffff80378ab9>] usb_forced_unbind_intf+0x17/0x1d [<ffffffff80371ba4>] usb_reset_device+0x7d/0x114 [<ffffffffa02aaffd>] ub_reset_task+0x0/0x293 [ub] [<ffffffffa02ab1c1>] ub_reset_task+0x1c4/0x293 [ub] [<ffffffff8033dd1e>] flush_to_ldisc+0x0/0x1cd [<ffffffffa02aaffd>] ub_reset_task+0x0/0x293 [ub] [<ffffffff8023d302>] run_workqueue+0x87/0x114 [<ffffffff8023d467>] worker_thread+0xd8/0xe7 [<ffffffff802407c9>] autoremove_wake_function+0x0/0x2e [<ffffffff8023d38f>] worker_thread+0x0/0xe7 [<ffffffff802404c1>] kthread+0x47/0x73 [<ffffffff8022c8dd>] schedule_tail+0x27/0x60 [<ffffffff8020c249>] child_rip+0xa/0x11 [<ffffffff8024047a>] kthread+0x0/0x73 [<ffffffff8020c23f>] child_rip+0x0/0x11 This is because usb_reset_device now unbinds, and that calls disconnect, which in case of ub waits until the reset completes... which deadlocks. Worse, this deadlocks keventd and this takes whole box down. I'm going to fix this properly later, but let's unbreak the driver quickly for non-composite devices at least. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: SISUSB2VGA driver: add 0x0711, 0x0903Albert Comerma
Signed-off-by: Albert Comerma <albert.comerma@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13usb: unusual devs patch for Nokia 7610 SupernovaRicky Wong
Additional sectors were reported by the Nokia 7610 Supernova phone in usb storage mode. The following patch rectifies the aforementioned problem. Signed-off-by: Ricky Wong Yung Fei <evilbladewarrior@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: remove optional bus bindings in isp1760, fixing runtime warningSebastian Andrzej Siewior
Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [<c017540e>] kmem_cache_create+0xc9/0x3a3 | [<c0159a8d>] free_pages_bulk+0x16c/0x1c9 | [<f165c05f>] isp1760_init+0x0/0xb [isp1760] | [<f165c018>] init_kmem_once+0x18/0x5f [isp1760] | [<f165c064>] isp1760_init+0x5/0xb [isp1760] | [<c010113d>] _stext+0x4d/0x148 | [<c0142936>] load_module+0x12cd/0x142e | [<c01743c4>] kmem_cache_destroy+0x0/0xd7 | [<c0142b1e>] sys_init_module+0x87/0x176 | [<c01039eb>] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by: Roland Kletzing <devzero@web.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>a Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13+ usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm treeDamir N Abdullin
Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by: Damir N Abdullin <damir@mimas.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: storage: adjust comment in KconfigPaul Bolle
Since commit 65934a9 ("Make USB storage depend on SCSI rather than selecting it [try #6]") the comment at the top of drivers/usb/storage/Kconfig is incorrect. Adjust it to the current situation. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-13USB: Fix PS3 USB shutdown problemsGeoff Levand
Add ehci_shutdown() or ohci_shutdown() calls to the USB PS3 bus glue. ehci_shutdown() and ohci_shutdown() do some controller specific cleanups not done by usb_remove_hcd(). Fixes errors on shutdown or reboot similar to these: ps3-ehci-driver sb_07: HC died; cleaning up irq 51: nobody cared (try booting with the "irqpoll" option) Related bugzilla reports: http://bugzilla.kernel.org/show_bug.cgi?id=11819 http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317 Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 21:37:18 +0000