aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-12V4L/DVB (9062): Add support for Prolink Pixelview Global ExtremeMauro Carvalho Chehab
Thanks to Sidney Matias <sidney.matias@gmail.com> for getting GPIO values and testing on this device. Cc: Sidney Matias <sidney.matias@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9061): saa7134: Add support for Real Audio 220Mauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9060): saa7134: Add support for Avermedia PCI pure analog (M135A)Mauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9059): saa7134: Add support for Encore version 5.3 boardMauro Carvalho Chehab
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9058): spca561: while balance -> white balance typoShane
Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9057): saa7134: Hauppauge HVR-1110, support for radio and analog ↵David Bentham
audio in The audio switch is at 0x100 and radio on gpio 21. Tested-by: Thomas Genty <tomlohave@gmail.com> Signed-off-by: David Bentham <db260179@hotmail.com> Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9055): tuner-xc2028: Do a better job selecting firmware typeMauro Carvalho Chehab
Firmware selection is very tricky on this device. This patch do a better selection of the proper firmware type, by using a code to hint if the firmware to be loaded should be D2620 or D2633. It also allows overriding the hint at the control structure. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9051): dib0700: use dvb_frontend->callback for xc5000 gpio resetMichael Krufky
The tuner_callback function pointer from struct xc5000_config has been removed. Use dvb_frontend->callback instead. Also, mark function dib0700_xc5000_tuner_callback as static int. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9049): convert tuner drivers to use dvb_frontend->callbackMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9048): add a general-purpose callback pointer to struct dvb_frontendMichael Krufky
Remove tuner_callback pointers from tuner driver configuration and private state structures, replaced with a general-purpose callback pointer within struct dvb_frontend. A new parameter is added to the callback function, called component. This allows us to use this callback pointer by frontend components other than the tuner, if need be. So far, this is only used by tuner drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9047): [PATCH] Add remote control support to Nova-TD (52009)Chris Rankin
This patch adds remote control support for the Hauppauge WinTV Nova-TD (Diversity) model. (That's the 52009 version.) It also adds the key-codes for the credit-card style remote control that comes with this particular adapter. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9046): Add support for Non-Pro version of Pinnacle PCTV HD USB StickDevin Heitmueller
Add USB ID for Pinnacle PCTV HD USB Stick. According to the USB trace and photos, the only difference is the removal of the port for the analog S-video/audio input. Thanks to Mike Pringle <oblongd@gmail.com> for providing the USB trace of the device starting up, and testing the support. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9045): Add Pinnacle 801e dependencies to KConfigDevin Heitmueller
Support for the Pinnacle PCTV HD Pro 801e creates a dib0700 dependency on the xc5000 tuner and s5h1411 demodulator drivers. Update KConfig accordingly. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9044): Add support for Pinnacle PCTV HD Pro 801e (ATSC only)Devin Heitmueller
Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a) Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new firmware fixing the issue with the i2c that prevented the xc5000 from working. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9042): Add support for Asus My Cinema U3000 HybridAlbert Comerma
This patch introduces support for dvb-t for the following dibcom based cards: Asus My Cinema U3000 Hybrid (USB-ID: 0b05:1736) Signed-off-by: Albert Comerma <albert.comerma@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9041): Add support YUAN High-Tech STK7700D (1164:1f08)Daniel Oliveira Nascimento
This patch extends the dib0700 driver to support the DVB-part of the Asus notebook M51Sn tv-tunner (USB-ID 1164:1f08). Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9040): TTUSB-DEC DVB-S: claim to have lockPeter Beutner
As reported by BOUWSMA Barry the readout of the signal status doesn't work on dec3000-s models. Since we don't know how to do it better, revert back to the old behaviour and always report a signal lock. Reported by Barry Bouwsma Signed-off-by: Peter Beutner <p.beutner@gmx.net> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9039): Add support for new i2c API provided in firmware version 1.20Devin Heitmueller
The Pinnacle PCTV HD Pro has an xc5000, which exposed a bug in the dib0700's i2c implementation where it did not properly support a single i2c read request (sending it as an i2c write request instead). Version 1.20 of the firmware added support for a new i2c API which supported such requests. This change defaults to fw 1.20 for all devices, but does not default to using the new i2c API (since initial testing suggests problems interacting with the mt2060). Maintainers can enable the use of the new i2c API by putting the following into their frontend initialization: struct dib0700_state *st = adap->dev->priv; st->fw_use_new_i2c_api = 1; Also note that the code expects i2c repeated start to be supported. If the i2c slave does not support repeated start, i2c messsages should have the I2C_M_NOSTART flag set. Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing new firmware fixing the issue as well as example i2c code utilizing the interface. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9038): Add support for the Gigabyte R8000-HT USB DVB-T adapter.Finn Thain
Thanks to Ilia Penev for the tip-off that this device is much the same as (identical to?) a Terratec Cinergy HT USB XE, and for the firmware hints: http://linuxtv.org/pipermail/linux-dvb/2008-August/028108.html DVB functionality tested OK with xine using the usual dib0700 firmware. This diff is based on the latest latest linuxtv.org v4l-dvb mercurial repo. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9036): uvcvideo: Fix control cache access when setting composite ↵Laurent Pinchart
auto-update controls Auto-update controls are never marked is loaded to prevent uvc_get_ctrl from loading the control value from the cache. When setting a composite (mapped to several V4L2 controls) auto-update UVC control, the driver updates the control cache value before processing each V4L2 control, overwriting the previously set V4L2 control. This fixes the problem by marking all controls as loaded in uvc_set_ctrl regardless of their type and resetting the loaded flag in uvc_commit_ctrl for auto-update controls. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9035): uvcvideo: Declare missing camera and processing unit controls.Laurent Pinchart
This declares all missing UVC camera and processing unit controls. V4L2 mappings are not supported yet for those controls. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9034): With the recent patch to v4l2 titled "v4l2: use ↵David Ellingsworth
register_chrdev_region instead of register_chrdev", the internal reference count is no longer necessary in order to free the internal stk_webcam struct. This patch removes the reference counter from the stk_webcam struct and frees the struct via the video_device release callback. It also fixes an associated bug in stk_camera_probe which could result from video_unregister_device being called before video_register_device. Lastly, it simplifies access to the stk_webcam struct in several places. This patch should apply cleanly against the "working" branch of the v4l-dvb git repository. This patch is identical to the patch I sent a couple of months back titled "stk-webcam: Fix video_device handling" except that it has been rebased against current modifications to stk-webcam and it no longer depends on any other outstanding patches. Acked-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9033): drivers/media/video/tda9840.c: unbreakAndrew Morton
drivers/media/video/tda9840.c: In function 'tda9840_command': drivers/media/video/tda9840.c:152: warning: 'result' is used uninitialized in this function [mchehab@redhat.com: Fix conflict with another patch that were meant to solve the warning] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB:usbvideo:don't use part of buffer for USB transfer #4Ming Lei
The status[] is part of uvc_device structure. We can't make sure the address of status is at a cache-line boundary in all archs,so status[] might share a cache-line with some fields in uvc_structure. This can lead to some cache coherence issues(http://lwn.net/Articles/2265/). Use dynamically allocated buffer instead. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9031): uvcvideo: Fix incomplete frame drop when switching to a ↵Laurent Pinchart
variable size format. When streaming in a fixed size format the driver sets a flag in the uvc_queue structure to drop incomplete incoming frames. The flag wasn't cleared when switching to a variable size format, which resulted in a broken 'MJPEG after YUV'. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9030): uvcvideo : Add support for Advent 4211 integrated webcamLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9028): saa7134: add support for the triple Asus Tiger 3in1hermann pitton
after looking it up, all rants about the 80 columns restriction seem to be in vain. After changing the card's name it are now "only" seven new lines in the tiny DVB-T/DVB-S switch function. saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:08.0, rev: 209, irq: 18, latency: 32, mmio: 0xfdef7000 saa7133[0]: subsystem: 1043:4878, board: Asus Tiger 3in1 [card=147,autodetected] saa7133[0]: board init: gpio is 200000 tuner' 2-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 43 10 78 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d7 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 28 00 c2 96 16 03 02 c0 1c ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x16 [???] saa7133[0]: i2c scan: found device @ 0x1c [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] tda829x 2-004b: setting tuner address to 61 tda829x 2-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10086 DVB-S)... The board init gpio is 0x0, 0x200000 is from previously unloading with antenna_switch = 1. It needs firmware for the tda10046 and analog sound needs saa7134-alsa. I have support for one more board and need to fix the first revision of the Asus Tiger DVB-T hybrid. DVB-T currently hangs on the male radio antenna input, also some small other stuff. Please report any issues with this patch, the next are depending on this one. saa7134: add support for the triple Asus Tiger 3in1 Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9026): Add support for ST STV0288 demodulator and cards with it.Igor M. Liplianin
Add support for ST STV0288 demodulator and cards with it, such as TeVii S420. Patch is co-authored with Georg Acher <acher@baycom.de> Signed-off-by: Georg Acher <acher@baycom.de> Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9025): S2API: Deactivate the ISDB-T definitionsSteven Toth
We don't want to push the ISDB-T definitions into the kernel until we have a high level of confidence in the ISDB-T API. More testing is required before this code is released. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9023): cx88: HVR3000 / 4000 GPIO related changesSteven Toth
Patch by Darron Broad. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9022): cx88: Enable TDA9887 on HVR1300 / 3000 / 4000Steven Toth
Patch provided by Darron Broad. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9021): S2API: Add Kconf dependencySteven Toth
Patch provided by Darron Broad Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9020): Added support for TBS 8920 DVB-S/S2 cardOleg Roitburd
Added support for TBS 8920 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9019): Added support for Omicom SS4 DVB-S/S2 cardOleg Roitburd
Added support for Omicom SS4 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9018): Add support for USB card modification with SI2109/2110 ↵Igor M. Liplianin
demodulator. Add support for USB card modification with SI2109/2110 demodulator. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9017): Add support for Silicon Laboratories SI2109/2110 demodulators.Igor M. Liplianin
Add support for Silicon Laboratories SI2109/2110 demodulator and cards with it, such as DvbWorld PCI2002. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9016): HVR3000/4000 Hauppauge related IR cleanupsDarron Broad
From the author: This patch-set fixes remote control issues I have experienced with hauppauge drivers in Linux since the PVR-350 and now with both a NOVA-S+ and HVR-4000. It has also been confirmed to work with an HVR-1300 user who had exactly the same issue. Hauppage remote controls use RC5. RC5 has a bit-field which represents the target device. The hauppauge windows drivers have a registry key which can enable filtering, but the linux drivers will accept any target device in this bit field for internal processing. This causes problems with setups such as mythtv where remote control key presses destined for the TV (target = 0) are interpreted by the kernel and subsequenctly LIRC then mythtv. Of the remote controls I have to hand (wintv black, pvr/hvr silver) the hauppauge remotes send one of two device targets ids, these are interpreted by the patch which then filters out any non hauppauge addresses. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9015): S2API: cx24116 register description fixes.Darron Broad
From the author: Here is a simple patch detailing some reverse engineered register detail lost in my latest merge. The comments in the code refer to this register but it is never defined. This corrects this. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9014): History update: MPEG initialization in cx24116.Igor M. Liplianin
Adjust MPEG initialization in cx24116 in order to accomodate different MPEG CLK position and polarity in different cards. For example, HVR4000 uses 0x02 value, but DvbWorld & TeVii USB cards uses 0x01. Without it MPEG stream was broken on that cards for symbol rates > 30000 kSyms/s. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9013): S2API: cx24116 Rolloff changes, sysctls cleanup, isl power ↵Darron Broad
changes. Remove the debugging sysctls. Rolloff was broken, not it works as expected and has been tested in kaffeine. Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9012): Add support for DvbWorld 2004 DVB-S2 PCI adapterIgor M. Liplianin
Add support for DvbWorld 2004 DVB-S2 PCI adapter. The card contains dm1105 PCI chip and cx24116 demodulator Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9011): S2API: A number of cleanusp from the last 24 months.Darron Broad
I was given these changes by Darron Broad and Igor Liplianin and represent a series of patches they've been making to the cx24116 driver over the last two years. Changes for handling symbolrates >30Ksps Tone handling changes. Diseqc support. Sleep support, shutting down the clocks correctly. Cleanup on ROLL_OFF and PILOT support. *** ST - We need to cleanup the sysclt control, this is abnormal in a demod driver. We should work towards understanding the missing API's and ensure we have them in S2API. *** Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9010): Add support for SDMC DM1105 PCI chipIgor M. Liplianin
Add support for SDMC DM1105 PCI chip. There is a lot of cards based on it, like DvbWorld 2002 DVB-S , 2004 DVB-S2 Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9009): Nova-se2 / Nova-s-plus Intersil6421 power fix to support ↵Steven Toth
switches. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9008): S2API: Bugfix related to syncing the cache when used with ↵Steven Toth
the old API. Many thanks to Darron Broad for pointing out the obvious. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9007): S2API: Changed bandwidth to be expressed in HZSteven Toth
Also added some compat code for the older API. Added more ISDB message/command suggestions, current not connected in dvb-core. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9006): S2API: Allow reliable use of old and new api on the same ↵Steven Toth
frontend, regardless. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9005): Bug fix: ioctl FE_SET_PROPERTY/FE_GET_PROPERTY always return ↵Igor M. Liplianin
error Bug fix: ioctl FE_SET_PROPERTY/FE_GET_PROPERTY always return error Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9004): S2API: Implement GET/SET handing to the demodsSteven Toth
The frontends will be notified (if they chose) of all _get and _set commands so they can help determine result or action. Results are now returned to userspace correctly. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (9003): S2API: Remove the DTV_SET_ and DTV_GET_ prefixesSteven Toth
The API now assumes that ioctl calls for FE_SET_PROPERTY and all set commands, and FE_GET_PROPERTY are get commands. Simplification. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 00:06:50 +0000