aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-10-15Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) [IPV6]: Consolidate the ip6_pol_route_(input|output) pair [TCP]: Make snd_cwnd_cnt 32-bit [TCP]: Update the /proc/net/tcp documentation [NETNS]: Don't panic on creating the namespace's loopback [NEIGH]: Ensure that pneigh_lookup is protected with RTNL [INET]: kmalloc+memset -> kzalloc in frag_alloc_queue [ISDN]: Fix compile with CONFIG_ISDN_X25 disabled. [IPV6]: Replace sk_buff ** with sk_buff * in input handlers [SELINUX]: Update for netfilter ->hook() arg changes. [INET]: Consolidate the xxx_put [INET]: Small cleanup for xxx_put after evictor consolidation [INET]: Consolidate the xxx_evictor [INET]: Consolidate the xxx_frag_destroy [INET]: Consolidate xxx_the secret_rebuild [INET]: Consolidate the xxx_frag_kill [INET]: Collect common frag sysctl variables together [INET]: Collect frag queues management objects together [INET]: Move common fields from frag_queues in one place. [TG3]: Fix performance regression on 5705. [ISDN]: Remove local copy of device name to make sure renames work. ...
2007-10-15Map volume and brightness events on thinkpadsJeremy Katz
There are standard keycodes for brightness and volume; map the events to emit them so that things work properly Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits) Input: use full RCU API Input: remove tsdev interface Input: add support for Blackfin BF54x Keypad controller Input: appletouch - another fix for idle reset logic HWMON: hdaps - switch to using input-polldev Input: add support for SEGA Dreamcast keyboard Input: omap-keyboard - don't pretend we support changing keymap Input: lifebook - fix X and Y axis range Input: usbtouchscreen - add support for GeneralTouch devices Input: fix open count handling in input interfaces Input: keyboard - add CapsShift lock Input: adbhid - produce all CapsLock key events Input: ALPS - add signature for ThinkPad R61 Input: jornada720_kbd - send MSC_SCAN events Input: add support for the HP Jornada 7xx (710/720/728) touchscreen Input: add support for HP Jornada 7xx onboard keyboard Input: add support for HP Jornada onboard keyboard (HP6XX) Input: ucb1400_ts - use schedule_timeout_uninterruptible Input: xpad - fix dependancy on LEDS class Input: auto-select INPUT for MAC_EMUMOUSEBTN option ... Resolved conflicts manually in drivers/hwmon/applesmc.c: converting from a class device to a device and converting to use input-polldev created a few apparently trivial clashes..
2007-10-15Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] pata_pcmcia: Add additional id string (corsair, 1GB) libata: prevent devices with blank model names from being DMA blacklisted ata_piix: SATA 2port controller port map fix pata_cs5536: ATA driver for Geode companion chip libata: add ST9160821AS / 3.CCD to NCQ blacklist libata: fix revalidation issuing after configuration commands [libata] sata_nv: add SW NCQ support for MCP51/MCP55/MCP61 [libata] pata_sil680: Add MMIO support
2007-10-15Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (35 commits) xen-netfront: rearrange netfront structure to separate tx and rx netdev: convert non-obvious instances to use ARRAY_SIZE() ucc_geth: Fix build break introduced by commit 09f75cd7bf13720738e6a196cc0107ce9a5bd5a0 gianfar: Fix regression caused by new napi interface gianfar: Cleanup compile warning caused by 0795af57 gianfar: Fix compile regression caused by bea3348e add new prom.h for AU1x00 update AU1000 get_ethernet_addr() MIPSsim: General cleanup Jazzsonic: Fix warning about unused variable. Remove msic_dcr_read() in axon_msi.c Use dcr_host_t.base in dcr_unmap() Add dcr_host_t.base in dcr_read()/dcr_write() Use dcr_host_t.base in ibm_emac_mal Update ibm_newemac to use dcr_host_t.base tehuti: possible leak in bdx_probe TC35815: Fix build SAA9730: Fix build AR7 ethernet myri10ge: update driver version to 1.3.2-1.287 ...
2007-10-15xen-netfront: rearrange netfront structure to separate tx and rxJeremy Fitzhardinge
Keep tx and rx elements separate on different cachelines to prevent bouncing. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Atari keyboard: incorporate additional review commentsGeert Uytterhoeven
Atari keyboard: incorporate additional review comments: o Kill reference to source file name o Return error value from input_register_device() instead of -ENOMEM Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15netdev: convert non-obvious instances to use ARRAY_SIZE()Alejandro Martinez Ruiz
This will convert remaining non-obvious or naive calculations of array sizes to use ARRAY_SIZE() macro. Signed-off-by: Alejandro Martinez Ruiz <alex@flawedcode.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15[NETNS]: Don't panic on creating the namespace's loopbackPavel Emelyanov
When the loopback device is failed to initialize inside the new namespaces, panic() is called. Do not do it when the namespace in question is not the init_net. Plus cleanup the error path a bit. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15Reinstate lost flush_ioremap_region() fix to pxa2xx-flash driverLinus Torvalds
Commit 90833fdab89da02fc0276224167f0a42e5176f41 ("[ARM] 4554/1: replace consistent_sync() with flush_ioremap_region()") introduced a new "flush_ioremap_region()" function to be used by the MTD mainstone-flash and lubbock-flash drivers to fix a regression from around 2.6.18. Those drivers were independently merged into a single driver by Todd Poynor in commit e644f7d6289456657996df4192de76c5d0a9f9c7 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver") Later, those two commits were merged into the main MTD tree by commit b160292cc216a50fd0cd386b0bda2cd48352c73b ("Merge Linux 2.6.23") by David Woodhouse, but in that merge, the fix to use flush_iomap_region() got lost (as it was to files that now no longer existed). This reinstates the fix in the new driver. Noticed-by: Russell King <rmk@arm.linux.org.uk> Tested-and-acked-by: Nicolas Pitre <nico@cam.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15[ISDN]: Fix compile with CONFIG_ISDN_X25 disabled.Denis V. Lunev
On Mon, Oct 15, 2007 at 06:44:56PM +0400, Denis V. Lunev wrote: Compilation fix. The problem appears after 7c076d1de869256848dacb8de0050a3a390f95df by Karsten Keil <kkeil@suse.de> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15[libata] pata_pcmcia: Add additional id string (corsair, 1GB)Kristoffer Ericson
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-15scsi/gdth: fix crash in gdth_timeout if no gdth controllers foundLinus Torvalds
If the gdth module is loaded (or compiled in), the gdth_timeout function gets started even if no actual gdth controllers are found b the probing. That ends up not only being unnecessary, but also causes a crash due to the function blindly just trying to pick the first entry off the "gdth_instances" list, and accessing it - which obviously doesn't work if the list is empty! Noticed by Ingo Molnar. Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15libata: prevent devices with blank model names from being DMA blacklistedAndrew Paprocki
The strn_pattern_cmp routine does not handle a blank name parameter properly. The only patterns which should match a blank name are "*" and an explicit "". If the function is passed a blank name in current code, it will always match against the patt parameter. The bug manifests itself as the device with the empty model name always matching the first device in the DMA blacklist, forcing it to revert to PIO mode. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-15ata_piix: SATA 2port controller port map fixJason Gaston
This patch adds a port map for ICH9 and ICH8 SATA controllers that have only 2 ports available in that mode. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15pata_cs5536: ATA driver for Geode companion chipMartin K. Petersen
This is a driver for the ATA controller on the Geode CS5536 companion chip. The PCI device ID for this device was previously claimed by pata_amd.c but the PIO timings were not correct. This driver also works around a bug in some BIOSes that handle unaligned access to the PCI config registers poorly. Finally, the driver allows fallback to using MSR registers for configuration on BIOSes that are truly broken. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15[TG3]: Fix performance regression on 5705.Michael Chan
A performance regression was introduced by the following commit: commit ee6a99b539a50b4e9398938a0a6d37f8bf911550 Author: Michael Chan <mchan@broadcom.com> Date: Wed Jul 18 21:49:10 2007 -0700 [TG3]: Fix msi issue with kexec/kdump. In making that change, the PCI latency timer and cache line size registers were not restored after chip reset. On the 5705, the latency timer gets reset to 0 during chip reset and this causes very poor performance. Update version to 3.84. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15[ISDN]: Remove local copy of device name to make sure renames work.Karsten Keil
Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15[NIU]: getting rid of __ucmpdi2 in niu.oAl Viro
By the time we get to that switch by PHY type, we have 8bit value. No need to keep it in u64 when u8 would do. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15[NIU]: Fix write past end of array in niu_pci_probe_sprom().David S. Miller
Noticed by Coverity checker and reported by Adrian Bunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-15libata: add ST9160821AS / 3.CCD to NCQ blacklistTejun Heo
ST9160821AS / 3.CCD does spurious completions too. Blacklist it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15libata: fix revalidation issuing after configuration commandsTejun Heo
After commands which can change device configuration, EH is scheduled to revalidate and reconfigure the device. Host link was incorrectly used unconditionally when scheduling EH action. This resulted in bogus revalidation request and mismatched configuration between device and driver. Fix it. This bug was reported by Igor Durdanovic. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Igor Durdanovic <idurdanovic@comcast.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15[libata] sata_nv: add SW NCQ support for MCP51/MCP55/MCP61Kuan Luo
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA controller. NCQ function is disable by default, you can enable it with 'swncq=1'. NCQ will be turned off if the drive is Maxtor on MCP51 or MCP55 rev 0xa2 platform. [akpm@linux-foundation.org: build fix] Signed-off-by: Kuan Luo <kluo@nvidia.com> Signed-off-by: Peer Chen <pchen@nvidia.com> Cc: Zoltan Boszormenyi <zboszor@dunaweb.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-15[libata] pata_sil680: Add MMIO supportBenjamin Herrenschmidt
This patch adds MMIO support to the pata_sil680 for taskfile IOs, based on what the old siimage does. I haven't bothered changing the chip setup stuff from PCI config cycles to MMIO though (siimage does it), I don't think it matters, I've only adapted it to use MMIO for taskfile accesses. I've tested it on a Cell blade and it seems to work fine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15ucc_geth: Fix build break introduced by commit ↵Emil Medve
09f75cd7bf13720738e6a196cc0107ce9a5bd5a0 drivers/net/ucc_geth.c: In function 'ucc_geth_rx': drivers/net/ucc_geth.c:3483: error: 'dev' undeclared (first use in this function) drivers/net/ucc_geth.c:3483: error: (Each undeclared identifier is reported only once drivers/net/ucc_geth.c:3483: error: for each function it appears in.) make[2]: *** [drivers/net/ucc_geth.o] Error 1 Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15gianfar: Fix regression caused by new napi interfaceLi Yang
Protect all new napi function calls with CONFIG_GFAR_NAPI. Otherwise the driver will stop working when CONFIG_GFAR_NAPI disabled. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15gianfar: Cleanup compile warning caused by 0795af57Li Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15gianfar: Fix compile regression caused by bea3348eLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15add new prom.h for AU1x00Yoichi Yuasa
Add new prom.h for AU1x00. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15update AU1000 get_ethernet_addr()Yoichi Yuasa
Update AU1000 get_ethernet_addr(). Three functions were brought together in one. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15MIPSsim: General cleanupRalf Baechle
General cleanups mostly as suggested by checkpatch plus getting rid of homebrew version of offsetof(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Jazzsonic: Fix warning about unused variable.Ralf Baechle
Caused by "[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()" aka 0795af5729b18218767fab27c44b1384f72dc9ad. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Use dcr_host_t.base in dcr_unmap()Michael Ellerman
With the base stored in dcr_host_t, there's no need for callers to pass the dcr_n into dcr_unmap(). In fact this removes the possibility of them passing the incorrect value, which would then be iounmap()'ed. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Add dcr_host_t.base in dcr_read()/dcr_write()Michael Ellerman
Now that all users of dcr_read()/dcr_write() add the dcr_host_t.base, we can save them the trouble and do it in dcr_read()/dcr_write(). As some background to why we just went through all this jiggery-pokery, benh sayeth: Initially the goal of the dcr_read/dcr_write routines was to operate like mfdcr/mtdcr which take absolute DCR numbers. The reason is that on 4xx hardware, indirect DCR access is a pain (goes through a table of instructions) and it's useful to have the compiler resolve an absolute DCR inline. We decided that wasn't worth the API bastardisation since most places where absolute DCR values are used are low level 4xx-only code which may as well continue using mfdcr/mtdcr, while the new API is designed for device "instances" that can exist on 4xx and Axon type platforms and may be located at variable DCR offsets. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Use dcr_host_t.base in ibm_emac_malMichael Ellerman
This requires us to do a sort-of fake dcr_map(), so that base is set properly. This will be fixed/removed when the device-tree-aware emac driver is merged. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15Update ibm_newemac to use dcr_host_t.baseMichael Ellerman
Now that dcr_host_t contains the base address, we can use that in the ibm_newemac code, rather than storing it separately. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15tehuti: possible leak in bdx_probeFlorin Malita
If pci_enable_device fails, bdx_probe returns without freeing the allocated pci_nic structure. Coverity CID 1908. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15TC35815: Fix buildRalf Baechle
bea3348eef27e6044b6161fd04c3152215f96411 broke the build of tc35815.c for the non-NAPI case: CC drivers/net/tc35815.o drivers/net/tc35815.c: In function 'tc35815_interrupt': drivers/net/tc35815.c:1464: error: redefinition of 'lp' drivers/net/tc35815.c:1443: error: previous definition of 'lp' was here Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15SAA9730: Fix buildRalf Baechle
Fix build breakage by the recent statistics cleanup in cset 09f75cd7bf13720738e6a196cc0107ce9a5bd5a0. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15AR7 ethernetMatteo Croce
New version which uses less locking and drops old API Signed-off-by: Matteo Croce <technoboy85@gmail.com> Signed-off-by: Eugene Konev <ejka@imfi.kspu.ru> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15myri10ge: update driver version to 1.3.2-1.287Brice Goglin
The myri10ge driver is now at version 1.3.2-1.287. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15myri10ge: add IPv6 TSO supportBrice Goglin
Add support for IPv6 TSO to the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15myri10ge: update firmware headersBrice Goglin
Update myri10ge firmware headers to latest upstream version with TSO6 and RSS support. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15myri10ge: fix some indentation, white spaces, and commentsBrice Goglin
Fix one comment in myri10ge.c and update indendation and white spaces to match the code generated by indent from upstream CVS. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15net/bonding: Optionally allow ethernet slaves to keep own MACJay Vosburgh
Update the "don't change MAC of slaves" functionality added in previous changes to be a generic option, rather than something tied to IB devices, as it's occasionally useful for regular ethernet devices as well. Adds "fail_over_mac" option (which is automatically enabled for IB slaves), applicable only to active-backup mode. Includes documentation update. Updates bonding driver version to 3.2.0. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15net/bonding: Destroy bonding master when last slave is goneMoni Shoua
When bonding enslaves non Ethernet devices it takes pointers to functions in the module that owns the slaves. In this case it becomes unsafe to keep the bonding master registered after last slave was unenslaved because we don't know if the pointers are still valid. Destroying the bond when slave_cnt is zero ensures that these functions be used anymore. Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15net/bonding: Delay sending of gratuitous ARP to avoid failureMoni Shoua
Delay sending a gratuitous_arp when LINK_STATE_LINKWATCH_PENDING bit in dev->state field is on. This improves the chances for the arp packet to be transmitted. Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15net/bonding: Handlle wrong assumptions that slave is always an Ethernet deviceMoni Shoua
bonding sometimes uses Ethernet constants (such as MTU and address length) which are not good when it enslaves non Ethernet devices (such as InfiniBand). Signed-off-by: Moni Shoua <monis at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15net/bonding: Enable IP multicast for bonding IPoIB devicesMoni Shoua
Allow to enslave devices when the bonding device is not up. Over the discussion held at the previous post this seemed to be the most clean way to go, where it is not expected to cause instabilities. Normally, the bonding driver is UP before any enslavement takes place. Once a netdevice is UP, the network stack acts to have it join some multicast groups (eg the all-hosts 224.0.0.1). Now, since ether_setup() have set the bonding device type to be ARPHRD_ETHER and address len to be ETHER_ALEN, the net core code computes a wrong multicast link address. This is b/c ip_eth_mc_map() is called where for multicast joins taking place after the enslavement another ip_xxx_mc_map() is called (eg ip_ib_mc_map() when the bond type is ARPHRD_INFINIBAND) Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15net/bonding: Enable bonding to enslave netdevices not supporting ↵Moni Shoua
set_mac_address() This patch allows for enslaving netdevices which do not support the set_mac_address() function. In that case the bond mac address is the one of the active slave, where remote peers are notified on the mac address (neighbour) change by Gratuitous ARP sent by bonding when fail-over occurs (this is already done by the bonding code). Signed-off-by: Moni Shoua <monis at voltaire.com> Signed-off-by: Or Gerlitz <ogerlitz at voltaire.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 12:26:17 +0000