aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-10-28[IB] umad: Fix device lifetime problemsRoland Dreier
Move ib_umad module to using cdev_alloc() and class_device_create() so that we can handle device lifetime properly. Now we can make sure we keep all of our data structures around until the last way to reach them is gone. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-28[IPoIB] Drop RX packets when out of memoryRoland Dreier
Change the way IPoIB handles RX packets when it can't allocate a new receive skbuff. If the allocation of a new receive skb fails, we now drop the packet we just received and repost the original receive skb. This means that the receive ring always stays full and we don't have to monkey around with trying to schedule a refill task for later. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-27[IB] ib_umad: various cleanupsSean Hefty
Simplify user_mad.c code in a few places, and convert from kmalloc() + memset() to kzalloc(). This also fixes a theoretical race window by not accessing packet->length after posting the send buffer (the send could complete and packet could be freed before we get to the return statement at the end of ib_umad_write()). Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-27[IB] ib_umad: fix crash when freeing send buffersRoland Dreier
The conversion of user_mad.c to the new MAD send API was slightly off: in a few places, we used packet->msg instead of packet->msg->mad when referring to the actual data buffer, which ended up corrupting the underlying data structure and crashing when we free an invalid pointer. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-27[IB] mthca: first pass at catastrophic error reportingRoland Dreier
Add some initial support for detecting and reporting catastrophic errors reported by Mellanox HCAs. We start a periodic timer which polls the catastrophic error reporting buffer in device memory. If an error is detected, we dump the contents of the buffer for port-mortem debugging, and report a fatal asynchronous error to higher levels. In the future we can try to recover from these errors by resetting the device, but this will require some work in higher-level code as well. Let's get this in now, so that we at least get catastrophic errors reported in logs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-25[IB] simplify mad_rmpp.c:alloc_response_msg()Roland Dreier
Change alloc_response_msg() in mad_rmpp.c to return the struct it allocates directly (or an error code a la ERR_PTR), rather than returning a status and passing the struct back in a pointer param. This simplifies the code and gets rid of warnings like drivers/infiniband/core/mad_rmpp.c: In function nack_recv: drivers/infiniband/core/mad_rmpp.c:192: warning: msg may be used uninitialized in this function with newer versions of gcc. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-25[IB] mthca: correct modify QP attribute masks for UCRoland Dreier
The UC transport does not support RDMA reads or atomic operations, so we shouldn't require or even allow the consumer to set attributes relating to these operations for UC QPs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-25[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mappedSean Hefty
The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-24[IB] CM: Fix initialization of QP attributes for UC QPs.Sean Hefty
Fix cm_init_qp_init_attr(), cm_init_qp_rtr_attr() and cm_init_qp_rts_attr() so that they correctly handle the differences between UC and RC QPs. This fixes problems with setting up UC QPs through the CM. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-24Manual merge of for-linus to upstream (fix conflicts in ↵Roland Dreier
drivers/infiniband/core/ucm.c)
2005-10-24[IB] Add idr_destroy() calls on module unloadRoland Dreier
Add idr_destroy() calls to the module_exit() functions of the four IB driver modules that use idrs, so we don't leak idr_layer_cache objects when these modules are unloaded. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-23Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds
2005-10-23[PATCH] ib: mthca: Always re-arm EQs in mthca_tavor_interrupt()Roland Dreier
We should always re-arm an event queue's interrupt in mthca_tavor_interrupt() if the corresponding bit is set in the event cause register (ECR), even if we didn't find any entries in the EQ. If we don't, then there's a window where we miss an EQ entry and then get stuck because we don't get another EQ event. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-23[PATCH] Kconfig: saa7134-dvb should not select cx22702Mike Krufky
On 2005-05-01, Gerd Knorr sent in a patch to add cx22702 to cx88-dvb: [PATCH] dvb: cx22702 frontend driver update http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=9990d744bea7d28e83c420e2c9d524c7a8a2d136 ...but as we can see, the Kconfig portion of his patch was incorrectly applied to saa7134-dvb instead of cx88-dvb. On 2005-06-24, Adrian bunk fixed cx88-dvb: [PATCH] VIDEO_CX88_DVB must select DVB_CX22702 http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d6988588e13616587aa879c2e0bd7cd811705e5d ...but we never removed the original patch from Gerd. This patch sets things straight: saa7134-dvb should not select cx22702 Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-23cardbus: limit IO windows to 256 bytesLinus Torvalds
That's what we've always historically done, and bigger windows seem to confuse some cardbus bridges. Or something. Alan reports that this makes the ThinkPad 600x series work properly again: the 4kB IO window for some reason made IDE DMA not work, which makes IDE painfully slow even if it works after DMA timeouts. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-21[PATCH] drm: another mga bugDave Airlie
The wrong state emission routines were being called for G550, and consistent maps weren't correctly mapped... Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-21[PATCH] mptsas: fix phy identifiersEric Moore
This fixes handling of the phy identifiers in mptsas. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> [ split it a pre-2.6.14 portion from Eric's bigger patch ] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-20[IB] user_mad: Use class_device.devtRoland Dreier
Use devt member of struct class_device so that we don't have to create our own "dev" file in sysfs. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-20[IB] user_mad: trivial coding style fixesRoland Dreier
Add spaces after "sizeof" operator to match the rest of file. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-20[IB] cm: Add missing break in switchRoland Dreier
Add missing "break" in switch statement. Without the break, the CM ended up always falling through and setting every connection request to use RC transport, which meant that UC connections didn't work. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-19[PATCH] scsi_error thread exits in TASK_INTERRUPTIBLE state.Steven Rostedt
Found in the -rt patch set. The scsi_error thread likely will be in the TASK_INTERRUPTIBLE state upon exit. This patch fixes this bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19[PATCH] `unaligned access' in acpi get_root_bridge_busnr()Peter Chubb
In drivers/acpi/glue.c the address of an integer is cast to the address of an unsigned long. This breaks on systems where a long is larger than an int --- for a start the int can be misaligned; for a second the assignment through the pointer will overwrite part of the next variable. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Acked-by: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19[PATCH] fix MGA DRM regression before 2.6.14Dave Airlie
I've gotten a report on lkml, of a possible regression in the MGA DRM in 2.6.14-rc4 (since -rc1), I haven't been able to reproduce it here, but I've figured out some possible issues in the mga code that were definitely wrong, some of these are from DRM CVS, the main fix is the agp enable bit on the old code path still used by everyone..... Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19[PATCH] Three one-liners in md.cNeilBrown
The main problem fixes is that in certain situations stopping md arrays may take longer than you expect, or may require multiple attempts. This would only happen when resync/recovery is happening. This patch fixes three vaguely related bugs. 1/ The recent change to use kthreads got the setting of the process name wrong. This fixes it. 2/ The recent change to use kthreads lost the ability for md threads to be signalled with SIG_KILL. This restores that. 3/ There is a long standing bug in that if: - An array needs recovery (onto a hot-spare) and - The recovery is being blocked because some other array being recovered shares a physical device and - The recovery thread is killed with SIG_KILL Then the recovery will appear to have completed with no IO being done, which can cause data corruption. This patch makes sure that incomplete recovery will be treated as incomplete. Note that any kernel affected by bug 2 will not suffer the problem of bug 3, as the signal can never be delivered. Thus the current 2.6.14-rc kernels are not susceptible to data corruption. Note also that if arrays are shutdown (with "mdadm -S" or "raidstop") then the problem doesn't occur. It only happens if a SIGKILL is independently delivered as done by 'init' when shutting down. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19[PATCH] raw1394: fix locking in the presence of SMP and interruptsAndy Wingo
Changes all spinlocks that can be held during an irq handler to disable interrupts while the lock is held. Changes spin_[un]lock_irq to use the irqsave/irqrestore variants for robustness and readability. In raw1394.c:handle_iso_listen(), don't grab host_info_lock at all -- we're not accessing host_info_list or host_count, and holding this lock while trying to tasklet_kill the iso tasklet this can cause an ABBA deadlock if ohci:dma_rcv_tasklet is running and tries to grab host_info_lock in raw1394.c:receive_iso. Test program attached reliably deadlocks all SMP machines I have been able to test without this patch. Signed-off-by: Andy Wingo <wingo@pobox.com> Acked-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19[PATCH] orinoco: limit message rateAndrew Morton
Brice Goglin <Brice.Goglin@ens-lyon.org> reports a printk storm from this driver. Fix. Acked-by: David Gibson <hermes@gibson.dropbear.id.au> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-19[SCSI] scsi_error thread exits in TASK_INTERRUPTIBLE state.Steven Rostedt
Found in the -rt patch set. The scsi_error thread likely will be in the TASK_INTERRUPTIBLE state upon exit. This patch fixes this bug. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-18[IB] mthca: Don't enter QP into MCG more than once.Jack Morgenstein
Avoid entering a QP as member of a multicast group multiple times. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[IB] Fail sysfs queries after device is unregisteredRoland Dreier
We keep IB device structures around until the last sysfs reference is gone, but we shouldn't ask the low-level driver to do anything after the LLD unregisters the device. To handle this, check the reg_state field and just fail sysfs show() requests if the device has already been unregistered. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[IB] mthca: Add struct pci_driver.owner fieldRoland Dreier
Set mthca_driver.owner to THIS_MODULE. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[IB] mthca: Use enum in mthca_alloc_db() prototypeRoland Dreier
Make the type parameter of mthca_alloc_db() be an enum mthca_db_type instead of an int. This doesn't have any practical effect but documents the functions a little better. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[IPoIB] Improve ipoib_timeout() outputRoland Dreier
Use jiffies_to_msecs() so we print a human-readable time so we don't have to worry about what HZ is configured to, and print out a few values to make post-mortem analysis easier. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-18[PATCH] vesafb: Fix display corruption on display blankAntonino A. Daplas
Reported by: Bob Tracy <rct@gherkin.frus.com> "...I've got a Toshiba notebook (730XCDT -- Pentium 150MMX) for which I'm using the Vesa FB driver. When the machine has been idle for some time and the driver attempts to powerdown the display, rather than the display going blank, it goes gray with several strange lines. When I hit the "shift" key or other-wise wake up the display, the old video state is not fully restored..." vesafb recently added a blank method which has only 2 states, powerup and powerdown. The powerdown state is used for all blanking levels, but in his case, powerdown does not work correctly for higher levels of display powersaving. Thus, for intermediate power levels, use software blanking, and use only hardware blanking for an explicit powerdown. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-18Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-10-18Add some basic .gitignore filesLinus Torvalds
This still leaves driver and architecture-specific subdirectories alone, but gets rid of the bulk of the "generic" generated files that we should ignore. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] uniput - fix crash on SMPDmitry Torokhov
Only signal completion after marking request slot as free, otherwise other processor can free request structure before we finish using it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] Fix /proc/acpi/events around suspendPavel Machek
Fix -EIO on /proc/acpi/events after suspends. This actually breaks suspending by power button in many setups. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] n_r3964 mod_timer() fixStephan Brodkorb
Since Revision 1.10 was released the n_r3964 module wasn't able to receive any data. The reason for that behavior is because there were some wrong calls of mod_timer(...) in the function receive_char (...). This patch should fix this problem and was successfully tested with talking to some kuka industrial robots. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[IB] ucm: quiet sparse warningsRoland Dreier
Make ctx_id_mutex and ctx_id_table static to quiet sparse warnings. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] CM: bind IDs to a specific deviceSean Hefty
Bind communication identifiers to a device to support device removal. Export per HCA CM devices to userspace. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2005-10-17[IB] merge ucm.h into ucm.cSean Hefty
Eliminate ucm.h. Replace ucm_dbg with direct call to printk KERN_ERR. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2005-10-17[IB] uverbs: Implement more commandsRoland Dreier
Add kernel support for userspace calling poll CQ, request CQ notification, post send, post receive, post SRQ receive, create AH and destroy AH commands. These commands allow us to support userspace verbs for devices that can't perform these operations directly from userspace (eg the PathScale HCA). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] uverbs: Add a mask of device methods allowed for userspaceRoland Dreier
Give each device a uverbs_cmd_mask, so that a low-level driver can control which methods may be called on behalf of userspace. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] fail SA queries if device initialization failedRoland Dreier
If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] uverbs: unlock correctly in error pathsRoland Dreier
A couple of functions were missing spin_unlock calls in error paths. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IPoIB] Rename ipoib_create_qp() -> ipoib_init_qp() and fix error cleanupRoland Dreier
ipoib_create_qp() no longer creates IPoIB's QP, so it shouldn't destroy the QP on failure -- that unwinding happens elsewhere, so the current code can cause a double free. While we're at it, the function's name should match what it actually does, so rename it to ipoib_init_qp(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: Better limit checking and reportingJack Morgenstein
Check the sizes of CQs, QPs and SRQs when creating objects, and fail instead of creating too-big queues. Also return real limits instead of just plausible-sounding values from mthca_query_device(). Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] Fix leak on MAD initialization failureRoland Dreier
There is a bug in ib_mad_init_device(): if ib_agent_port_open() fails for a given port, then the current code doesn't call ib_mad_port_close() for that port. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: detect SRQ overflowRoland Dreier
The hardware relies on us keeping one extra work request that never gets used in SRQs. Add checks to the SRQ work request posting functions so that they fail when someone is about to use up that extra work request, rather than when someone uses the very last work request. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-17[IB] mthca: SRQ limit reached eventsRoland Dreier
Our hardware supports generating an event when the number of receives posted to a shared receive queue (SRQ) falls below a user-specified limit. Implement mthca_modify_srq() to arm the limit, and add code to handle dispatching SRQ events when they occur. Signed-off-by: Roland Dreier <rolandd@cisco.com>