aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-12-19[TG3]: Endianness annotations.Al Viro
Fixed misannotations, introduced a new helper - tg3_nvram_read_le(). It gets __le32 * instead of u32 * and puts there the value converted to little-endian. A lot of callers of tg3_nvram_read() were doing that; converted them to tg3_nvram_read_le(). At that point the driver is practically endian-clean; the only remaining place is an actual bug, AFAICS; will be dealt with in the next patch. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-12-19pata_hpt37x: Fix HPT374 detectionAlan Cox
Bug #9261 Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-19ps3fb: Fix ps3fb free_irq() dev_idGeoff Levand
The dev_id arg passed to free_irq() must match that passed to request_irq(). Fixes this PS3 error message: Trying to free already-free IRQ 44 Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-19ps3fb: Update for firmware 2.10Geert Uytterhoeven
ps3fb: Update for firmware 2.10 As of PS3 firmware version 2.10, the GPU command buffer size must be at least 2 MiB large. Since we use only a small part of the GPU command buffer and don't want to waste precious XDR memory, move the GPU command buffer back to the start of the XDR memory reserved for ps3fb and let the unused part overlap with the actual frame buffer. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] initio: bugfix for accessors patch [SCSI] st: fix kernel BUG at include/linux/scatterlist.h:59! [SCSI] initio: fix conflict when loading driver [SCSI] sym53c8xx: fix "irq X: nobody cared" regression [SCSI] dpt_i2o: driver is only 32 bit so don't set 64 bit DMA mask [SCSI] sym53c8xx: fix free_irq() regression
2007-12-18[SCSI] initio: bugfix for accessors patchBoaz Harrosh
patch: [SCSI] initio: convert to use the data buffer accessors had a small but fatal bug in that it didn't increment the pointer into the initio scatterlist descriptors as it looped over the block generated ones. Fixed here. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-18[SCSI] st: fix kernel BUG at include/linux/scatterlist.h:59!FUJITA Tomonori
This is caused by a missing scatterlist initialisation (it only shows up when sg list handling debugging is turned on). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kai Makisara <Kai.Makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-18[SCSI] initio: fix conflict when loading driverAlan Cox
> I have a scanner connected to a Initio INI-950 SCSI card and I recently > upgraded from SuSE 10.2 to 10.3. The new kernel doesn't see any of my > devices. I get the following in /var/log/messages: > > ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16 > initio: I/O port range 0x0 is busy. > ACPI: PCI interrupt for device 0000:00:0a.0 disabled Humm not a collision - thats a bug in the driver updating. Looks like the changes I made and combined with Christoph's lost a line somewhere when I was merging it all. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-18[SCSI] sym53c8xx: fix "irq X: nobody cared" regressionTony Battersby
The patch described by the following excerpt from ChangeLog-2.6.24-rc1 eventually causes a "irq X: nobody cared" error after a while: commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE After this happens, the kernel disables the IRQ, causing the SCSI card to stop working until the next reboot. The problem is caused by the interrupt handler returning IRQ_NONE instead of IRQ_HANDLED after handling an interrupt-on-the-fly (INTF) condition. The following patch fixes the problem. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-18[SCSI] dpt_i2o: driver is only 32 bit so don't set 64 bit DMA maskJames Bottomley
This fixes a potential corruption bug where the truncation would cause reading or writing to the wrong memory area on machines with >4GB of main memory. Cc: Stable Kernel Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-18[SCSI] sym53c8xx: fix free_irq() regressionTony Battersby
The following commit changed the pointer passed to request_irq(), but failed to change the pointer passed to free_irq(): commit 99c9e0a1d6cfe1ba1169a7a81435ee85bc00e4a1 Author: Matthew Wilcox <matthew@wil.cx> Date: Fri Oct 5 15:55:12 2007 -0400 [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE ... The result is that free_irq() doesn't actually take any action. This patch fixes it. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-12-18Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Cleanup umem driver: fix most checkpatch warnings, conform to kernel block: let elv_register() return void as-iosched: fix write batch start point as-iosched: fix incorrect comments block: use jiffies conversion functions in scsi_ioctl.c
2007-12-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: remove unused 'mode' from the mmc_host structure sdhci: support JMicron JMB38x chips sdhci: use PIO when DMA can't satisfy the request sdhci: don't warn about sdhci 2.0 controllers sdhci: describe quirks
2007-12-18Cleanup umem driver: fix most checkpatch warnings, conform to kernelRandy Dunlap
coding style. linux-2.6.24-rc5-git3> checkpatch.pl-next patches/block-umem-ckpatch.patch total: 0 errors, 5 warnings, 530 lines checked All of these are line-length warnings. Only change in generated object file is due to not initializing a static global variable to 0. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-12-17Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (23 commits) iwlwifi: fix rf_kill state inconsistent during suspend and resume b43: Fix rfkill radio LED bcm43xx_debugfs sscanf fix libertas: select WIRELESS_EXT iwlwifi3945/4965: fix rate control algo reference leak ieee80211_rate: missed unlock wireless/ipw2200.c: add __dev{init,exit} annotations zd1211rw: Fix alignment problems libertas: add Dan Williams as maintainer sis190 endianness ucc_geth: really fix section mismatch pcnet_cs: add new id ixgb: make sure jumbos stay enabled after reset Net: ibm_newemac, remove SPIN_LOCK_UNLOCKED net: smc911x: shut up compiler warnings ucc_geth: minor whitespace fix drivers/net/s2io.c section fixes drivers/net/sis190.c section fix hamachi endianness fixes e100: free IRQ to remove warningwhenrebooting ...
2007-12-17Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix ATAPI draining libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer size libata-acpi: implement _GTF command filtering libata-acpi: improve _GTF execution error handling and reporting libata-acpi: improve ACPI disabling libata-acpi: implement dev->gtf_cache and evaluate _GTF right after _STM during resume libata-acpi: implement and use ata_acpi_init_gtm() libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() libata: ata_dev_disable() should be called from EH context libata: add more opcodes to ata.h libata: update ata_*_printk() macros such that level can be a variable libata-acpi: adjust constness in ata_acpi_gtm/stm() parameters sata_mv: improve warnings about Highpoint RocketRAID 23xx cards libata: add ST3160023AS / 3.42 to NCQ blacklist libata: clear link->eh_info.serror from ata_std_postreset() sata_sil: fix spurious IRQ handling
2007-12-17I/OAT: fix null device in call to dev_err()Shannon Nelson
We can't use the device in a dev_err() after a kzalloc failure or after the kfree, so simplify it to the pdev that was originally passed in. Cc: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17I/OAT: fixups from code commentsShannon Nelson
A few fixups from Andrew's code comments. - removed "static inline" forward-declares - changed use of min() to min_t() - removed some unnecessary NULL initializations - removed a couple of BUG() calls Fixes this: drivers/dma/ioat_dma.c: In function `ioat1_tx_submit': drivers/dma/ioat_dma.c:177: sorry, unimplemented: inlining failed in call to '__ioat1_dma_memcpy_issue_pending': function body not available drivers/dma/ioat_dma.c:268: sorry, unimplemented: called from here Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: "Williams, Dan J" <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17drivers/cpufreq/cpufreq_stats.c section fixAdrian Bunk
cpufreq_stats_free_table() mustn't be __cpuexit since it's called by the __cpuinit cpufreq_stat_cpu_callback(). This patch fixes the following section mismatch reported by Chris Clayton: WARNING: vmlinux.o(.init.text+0x143dd): Section mismatch: reference to .exit.text:cpufreq_stats_free_table (between 'cpufreq_stat_cpu_callback' and 'cpufreq_stats_init') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Chris Clayton <chris2553@googlemail.com> Acked-by: Dave Jones <davej@codemonkey.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17drivers/macintosh/via-pmu.c: Added a missing iounmapJulia Lawall
The error handling code should undo the ioremap as well. The problem was detected using the following semantic match (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2; constant C; int ret; @@ T E; ... * E = ioremap(...); if (E == NULL) S ... when != iounmap(E) when != if (E != NULL) { ... iounmap(E); ...} when != x1 = (T1)E if (...) { ... when != iounmap(E) when != if (E != NULL) { ... iounmap(E); ...} when != x2 = (T2)E ( * return; | * return C; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Olaf Hering <olaf@aepfle.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17pktcdvd: add kobject_put when kobject register failsDave Young
In kobject_register, the kobject reference is get in kobject_init, and then kobject_add. If kobject_add fail, it will only cleanup the reference got by itself. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Greg KH <greg@kroah.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17cpufreq: fix missing unlocks in cpufreq_add_dev error paths.Dave Jones
Ingo hit some BUG_ONs that were probably caused by these missing unlocks causing an unbalance. He couldn't reproduce the bug reliably, so it's unknown that it's definitly fixing the problem he hit, but it's a fairly good chance, and this fixes an obvious bug. [ Dave: "Ingo followed up that he hit some lockdep related output with this applied, so it may not be right. I'll look at it after xmas if no-one has it figured out before then." Akpm: "It looks pretty correct to me though." ] Signed-off-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17parport: "dev->timeslice" is an unsigned long, not an intEric Dumazet
While auditing proc_doulongvec_ms_jiffies_minmax() usage in kernel, I found a bug in drivers/parport/procfs.c, incorrectly using sizeof(int) instead of sizeof(unsigned long) Only 64bit arches are affected by this old bug. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17rtc-at32ap700x: fix irq init oopsDavid Brownell
Reorder at32_rtc_probe() so that it's safe (no oopsing) to fire the IRQ handler the instant that it's registered. (Bug noted via "Debug shared IRQ handlers" kernel debug option.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <hcegtvedt@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17libata: fix ATAPI drainingTejun Heo
With ATAPI transfer chunk size properly programmed, libata PIO HSM should be able to handle full spurious data chunks. Also, it's a good idea to suppress trailing data warning for misc ATAPI commands as there can be many of them per command - for example, if the chunk size is 16 and the drive tries to transfer 510 bytes, there can be 31 trailing data messages. This patch makes the following updates to libata ATAPI PIO HSM implementation. * Make it drain full spurious chunks. * Suppress trailing data warning message for misc commands. * Put limit on how many bytes can be drained. * If odd, round up consumed bytes and the number of bytes to be drained. This gets the number of bytes to drain right for drivers which do 16bit PIO. This patch is partial backport of improve-ATAPI-data-xfer patchset pending for #upstream. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata: update atapi_eh_request_sense() such that lbam/lbah contains buffer sizeTejun Heo
While updating lbam/h for ATAPI commands, atapi_eh_request_sense() was left out. Update it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: implement _GTF command filteringTejun Heo
Implement _GTF command filtering which can be controlled by libata.acpi_filter kernel parameter. Currently SETXFER and LOCK commands are filtered. libata configures transfer mode by itself and _GTF SETXFER commands can potentially disrupt device configuration. _GTM/_STM mechanism can't handle hotplugging too well and when _GTF is executed, controller is in PIO0 rather than the mode _STM configured. Note that detecting SET MAX LOCK requires looking at the previous command. This adds a bit to code complexity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: improve _GTF execution error handling and reportingTejun Heo
As _GTF commands can't transfer data, device error never signals transfer error. It indicates that the device vetoed the operation, so it's meaningless to retry. This patch makes libata-acpi to report and continue on device errors when executing _GTF commands. Also commands rejected by device don't contribute to the number of _GTF commands executed. While at it, update _GTF execution reporting such that all successful commands are logged at KERN_DEBUG and rename taskfile_load_raw() to ata_acpi_run_tf() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: improve ACPI disablingTejun Heo
* If _GTF evalution fails, it's pointless to retry. If nothing else is wrong, just ignore the error. * After disabling ACPI, return success iff the number of executed _GTF command equals zero. Otherwise, tell EH to retry. This change fixes bogus 1 return bug where ata_acpi_on_devcfg() expects the caller to reload IDENTIFY data and continue but the caller interprets it as an error. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: implement dev->gtf_cache and evaluate _GTF right after _STM ↵Tejun Heo
during resume On certain implementations, _GTF evaluation depends on preceding _STM and both can be pretty picky about the configuration. Using _GTM result cached during controller initialization satisfies the most neurotic _STM implementation. However, libata evaluates _GTF after reset during device configuration and the hardware state can be different from what _GTF expects and can cause evaluation failure. This patch adds dev->gtf_cache and updates ata_dev_get_GTF() such that it uses the cached value if available. Cache is cleared with a call to ata_acpi_clear_gtf(). Because for SATA ACPI nodes _GTF must be evaluated after _SDD which can't be done till IDENTIFY is complete, _GTF caching from ata_acpi_on_resume() is used only for IDE ACPI nodes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: implement and use ata_acpi_init_gtm()Tejun Heo
_GTM fetches currently configured transfer mode while _STM configures controller according to _GTM parameter and prepares transfer mode configuration TFs for _GTF. In many cases _GTM and _STM implementations are quite brittle and can't cope with configuration changed by libata. libata does not depend on ATA ACPI to configure devices. The only reason libata performs _GTM and _STM are to make _GTF evaluation succeed and libata also doesn't care about how _GTF TFs configure transfer mode. It overrides that configuration anyway, so from libata's POV, it doesn't matter what value is feeded to _STM as long as evaluation succeeds for _STM and following _GTF. This patch adds dev->__acpi_init_gtm and store initial _GTM values on host initialization before modified by reset and mode configuration. If the field is valid, ata_acpi_init_gtm() returns pointer to the saved _GTM structure; otherwise, NULL. This saved value is used for _STM during resume and peek at BIOS/firmware programmed initial timing for later use. The accessor is there to make building w/o ACPI easy as dev->__acpi_init doesn't exist if ACPI is not enabled. On driver detach, the initial BIOS configuration is restored by executing _STM with the initial _GTM values such that the next driver can also use the initial BIOS configured values. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable()Tejun Heo
Add two hooks - ata_acpi_dissociate() which is called during driver detach after the whole host is shutdown and ata_acpi_on_disable() which is called when a device is disabled. Signed-off-by: Tejun heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata: ata_dev_disable() should be called from EH contextTejun Heo
ata_port_detach() calls ata_dev_disable() with host lock held but ata_dev_disable() should be called from EH context. ata_port_detach() steals EH context by setting ATA_PFLAG_UNLOADAING and flushing EH. Drop locking around ata_dev_disable() and note that ata_port_detach() owns EH context at that point. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata-acpi: adjust constness in ata_acpi_gtm/stm() parametersTejun Heo
* No internal function uses const ata_port. Drop const from @ap. * Make ata_acpi_stm() copy @stm before using it and change @stm to const. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17sata_mv: improve warnings about Highpoint RocketRAID 23xx cardsMark Lord
Improve the existing boot/load time warnings from sata_mv for Highpoint RocketRAID 23xx cards, based on new knowledge about where the BIOS likes to overwrite sectors with metadata. Harmless to us, but very useful for end users. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata: add ST3160023AS / 3.42 to NCQ blacklistTejun Heo
Like ST380817AS / 3.42, ST3160023AS / 3.42 times out commands if NCQ is used. Blacklist it. This is reported by Matheus Izvekov in the following thread. http://thread.gmane.org/gmane.linux.ide/24202 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Matheus Izvekov <mizvekov@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17libata: clear link->eh_info.serror from ata_std_postreset()Tejun Heo
link->eh_info.serror is used to cache SError for controllers which need it cleared from interrupt handler to clear IRQ. It also should be cleared after reset just like SError itself. Make ata_std_postreset() clear link->eh_info.serror too and update sata_sil such that it doesn't care about bookkeeping the value. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17sata_sil: fix spurious IRQ handlingTejun Heo
Interestingly, sata_sil raises spurious interrupts if it's coupled with Sil SATA_PATA bridge. Currently, sata_sil interrupt handler is strict about spurious interrupts and freezes the port when it occurs. This patch makes it more forgiving. * On SATA PHY event interrupt, serror value is checked to see whether it really is PHYRDY CHG event. If not, SATA PHY event interrupt is ignored. * If ATA interrupt occurs while no command is in progress, it's cleared and ignored. This fixes bugzilla bug 9505. http://bugzilla.kernel.org/show_bug.cgi?id=9505 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-17Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-12-17iwlwifi: fix rf_kill state inconsistent during suspend and resumeZhu Yi
The patch fixes the STATUS_RF_KILL_HW state is not cleared problem if the device goes to suspend when the rf_kill switch is enabled. The bug causes the driver always thinks the rf_kill switch is enabled (although it is disabled) after resume. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17b43: Fix rfkill radio LEDLarry Finger
This fixes Bug #9414 Since addition of the rfkill callback, the LED associated with the off switch on the radio has not worked for several reasons: (1) Essential data in the rfkill structure were missing. (2) The rfkill structure was initialized after the LED initialization. (3) There was a minor memory leak if the radio LED structure was inited. Once the above problems were fixed, additional difficulties were noted: (4) The radio LED was in the wrong state at startup. (5) The radio switch had to be manipulated twice for each state change. (6) A circular mutex locking situation existed. (7) If rfkill-input is built as a module, it is not automatically loaded. This patch fixes all of the above. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17bcm43xx_debugfs sscanf fixAndrew Morton
ia64: drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c: In function `tsf_write_file': drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:237: warning: long long int format, u64 arg (arg 3) drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c:237: warning: long long int format, u64 arg (arg 3) We do not know what type was used to implement u64 and we can never use u64 in printk(), sscanf(), etc. Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17libertas: select WIRELESS_EXTDan Williams
Ensure that libertas selects WIRELESS_EXT, since selecting other stuff that should depend on WEXT, like IEEE80211, doesn't seem to drag that in for us. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17iwlwifi3945/4965: fix rate control algo reference leakCyrill Gorcunov
Fix rate control algo reference leak in case if network device has been failed to register. In this case special flag priv->mac80211_registered is not set and the rate algo reference is not freeing on module unload. That leads to OOPs in further ieee80211 rate register/unregister procedure (by any callee). It should fix the bug #9470 http://bugzilla.kernel.org/show_bug.cgi?id=9470 [akpm@linux-foundation.org: build fix] Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17wireless/ipw2200.c: add __dev{init,exit} annotationsAdrian Bunk
This patch adds __dev{init,exit} annotations. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17zd1211rw: Fix alignment problemsUlrich Kunitz
Shaddy Baddah found an alignment problem with zd1211rw driver at 2007-11-19. This patch fixes it, it is based on the patch proposed by Herbert Xu. The alignment 4 has been the agreed value on the linux-wireless mailing list. Notify that the problem does only affect the old zd1211rw softmac driver and not the zd1211rw-mac80211 driver. Daniel Drake has already provided a patch for the replacement of the softmac driver, which this patch will break. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Restore PCI expansion ROM P2P prefetch window creation
2007-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: HOWTO: update misspelling and word incorrected add stable_api_nonsense.txt in korean HOWTO: change addresses of maintainer and lxr url for Korean HOWTO Add Documentation for FAIR_USER_SCHED sysfs files HOWTO: Change man-page maintainer address for Japanese HOWTO tipar: remove obsolete module kobject: fix the documentation of how kobject_set_name works
2007-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: revert portions of "UNUSUAL_DEV: Sync up some reported devices from Ubuntu" usb: Remove broken optimisation in OHCI IRQ handler USB: at91_udc: correct hanging while disconnecting usb cable USB: use IRQF_DISABLED for HCD interrupt handlers USB: fix locking loop by avoiding flush_scheduled_work usb.h: fix kernel-doc warning USB: option: Bind to the correct interface of the Huawei E220 USB: cp2101: new device id usb-storage: Fix devices that cannot handle 32k transfers USB: sierra: fix product id
2007-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix ->io_32bit race in set_io_32bit() ide: remove stale changelog from ide-probe.c ide: remove stale changelog from ide-disk.c ide: remove dead code from __ide_dma_test_irq() hpt366: fix HPT37x PIO mode timings (take 2) pdc202xx_new: fix Promise TX4 support ide-cd: remove dead post_transform_command() ide: DMA reporting and validity checking fixes (take 3) ide: add /sys/bus/ide/devices/*/{model,firmware,serial} sysfs entries ide: coding style fixes for drivers/ide/setup-pci.c ide: fix ide_scan_pcibus() error message ide: deprecate CONFIG_BLK_DEV_OFFBOARD ide: add missing checks for control register existence ide-scsi: add ide_scsi_hex_dump() helper
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 08:37:24 +0000