aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-12-10V4L/DVB (4884): Remove stray IR code left from patchsetAndrew de Quincey
This caused compilation to fail - completely replaced by new style functions, so can be removed. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4883): Fix TD1316 tuner for DVBCThomas Kaiser
If your device is using the philips tda1316 tuner, i think there is a problem in setting the correct Band. 162 MHz and above should be band 2 (Mid-Band). But in dvbc_philips_tdm1316l_tuner_set_params band 1 is set for frequencies below 200 MHz. Signed-off-by: Thomas Kaiser <linux-dvb@kaiser-linux.li> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4882): budget-ci IR: make debounce logic conditionalDavid Hardeman
Change the debounce logic so that it is not used at all unless the debounce parameter has been set. This makes for a much "snappier" remote for most users as there is no timeout to wait for (the debounce logic has a 350ms timer for the next repeat, but with the RC5 protocol, one event per ~110ms is possible) Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4881): budget-ci IR: add IR debugging informationDavid Hardeman
This adds a ir_debug parameter which is useful in tracking down IR decoding problems. Based on Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4880): budget-ci IR: decode rc5 device byteDavid Hardeman
Decode the RC5 device byte as well as the command byte. Introduce a parameter to set the device events to listen for. Default to try to auto-detect the proper device code, otherwise, listen to any device as the old code did. Based on Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4879): budget-ci IR: integrate with ir-commonDavid Hardeman
This converts the budget-ci driver so that it uses ir-common for some of its IR processing. In particular, the keymap for the Nova-T (sub 13c2:1011) is switched to the Hauppauge grey/black keymap, of which the keys on the supplied R808 remote control form a subset. The old budget-ci keymap is moved to ir-keymaps.c and is used for other remotes. The debounce logic for buggy remotes (i.e. Zenith) is made conditional the new debounce parameter and defaults to off (so that repeat keypresses aren't ignored for all working remotes). Some parts are based on Darren Salt's dvb-ir patchset. Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4878): budget-ci IR: be more verbose in case of init failureDavid Hardeman
Trivial change to help the user understand what went wrong. Taken from Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4877): budget-ci IR: improve error checking in init and deinit ↵David Hardeman
functions Improve the error checking in the IR init and deinit functions. Based on Darren Salt's dvb-ir patchset. Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4876): budget-ci IR: support EVIOCGPHYSDavid Hardeman
This patch adds a 'phys' string, of the same form as used by various other DVB cards' IR drivers, for access by any program which uses the EVIOCPHYS ioctl or may read /sys/class/input/*/phys (e.g. udev) to identify input device nodes. Taken from Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4875): budget-ci IR: groundwork for following patchesDavid Hardeman
This patch lays down some groundwork for later budget-ci patches. The bulk of this consists of moving a few members into a new struct and renaming a few of them. It also allocates extra space for the device name (the "name" field in /proc/bus/input/devices and in the relevant sysfs dir) to avoid truncation and uses snprintf rather than sprintf in case the extra space shouldn't be enough. Taken from Darren Salt's dvb-ir patchset Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Hardeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4872): Saa7134-alsa improvementsHartmut Hackmann
The change does the following: - At device open, it sets the recording source to the current input instead of LINE2. So it is no longer necessary to set the recording source with a mixer application. - Connects the mixer volume control to the input sensitivity selection of the analog sound inputs. This allows only one 6db step. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4871): Fix i2c dependencies of VIDEO_TVEEPROM and VIDEO_TUNERMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4869): Lgh06xf: use return value of dvb_pll_configure()Michael Krufky
Use return value of dvb_pll_configure() to fill priv->frequency In lgh06xf_set_params: Rename int variable "err" to "result". Remove needless calculation of the set frequency, since this value is now being returned by dvb_pll_configure(). Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4868): Dvb-pll: return frequency set by dvb_pll_configure()Michael Krufky
This patch removes some duplicated code by returning the frequency set by dvb_pll_configure(), instead of recalculating it again in dvb_pll_set_params() and dvb_pll_calc_regs(). If the return value of dvb_pll_configure is less than zero, it is an error code. Otherwise, the return value is the frequency actually set by the function. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4867): Whitespace cleanupMichael Krufky
- adhere to 80-column limit - replace some spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4863): Adding support for Pinnacle PCTV 400e DVB-SPatrick Boettcher
Adding support for Pinnacle PCTV 400e DVB-S. The module name is called ttusb2, because it this device (and other Pinnacle devices) is using the USB-protocol originally used by Technotrend device. I'm suspecting Technotrend as the device-designer. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4864): TDA826x I2C read with 2 messagesPatrick Boettcher
Added a dump I2C message to the TDA826x-driver to fix I2C read for identification with ttusb2-driver. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4862): Fixes uninitialized variables passed to VIDIOC_G_FBUF.audetto@tiscali.it
Signed-off-by: Andrea A Odetti <audetto@tiscali.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4861): Remove the need of a STD array for drivers using video_ioctl2Mauro Carvalho Chehab
video_ioctl2 will auto-generate standard entries at ENUM_FMT. Also, now, a driver may return a subset of the video array at the return, to be stored as the current_norm. For example, a driver may ask for V4L2_STD_PAL. At return, driver may change it to V4L2_STD_PAL_B. This way, a futher call to G_STD will return the exact detected video std. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4860): Optimization of v4l1 handlingMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4859): Fix initializations on some video_ioctl2 handlersMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4858): Fix: implement missing VIDIOCSTUNER on v4l1-compat moduleMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4857): Cleans some ioctl structs before calling V4L2 counterpartMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4855): Support KNC1 DVBC cards with alternative tda10021 i2c addressAndrew de Quincey
For some reason, some of these cards have the tda10021 configured to a different address. This adds support for such cards Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4854): Handle errors from input_register_device()Dmitry Torokhov
Also sprinkled some input_sync() throughout the code. Acked-by: Ricardo Cerqueira <v4l@cerqueira.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4852): Pvrusb2: Fix horizontal resolution setting problem for 24xxx ↵Mike Isely
devices Fix long-standing issue which prevented use of 24xxx devices at any horizontal resolution other an 720. The problem is in the cx25840 module, if no attempt is made to initialize VBI there. Such a thing should not be needed, but the pvrusb2 driver is updated now to deal with this. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4850): Lgh06xf: fix compiler error when not selectedMichael Krufky
fix build error: lgh06xf.h:29: error: syntax error before '{' token Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4847): Drivers/media/dvb/frontends: kfree() cleanupsMichael Krufky
We don't have to check for NULL before kfree() Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4846): Create new lgh06xf atsc tuner moduleMichael Krufky
This patch creates a new atsc tuner module for the LG TDVS-H06xF ATSC tuners, called lgh06xf. The purpose of this change is to reduce some duplicated code, and to allow the lgh06xf tuner code to take advantage of dvb_attach(). As a side effect, the dependency of dvb-bt8xx on dvb-pll has been removed, since the lgh06xf module itself will use dvb-pll, while remaining optional for the dvb-bt8xx driver through the use of DVB_FE_CUSTOMISE Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4842): Updated camera driverJonathan Corbet
A couple of Cafe driver fixes, and support for the hue and saturation controls. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4839): Add support ptv-305Jelle Foks
Add subvendor/device of the ADSTech Instant TV Deluxe PTV-305 to the card list as card=45 (KWORLD_HARDWARE_MPEG_TV_XPERT). Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4838): Fix cx88-blackbird null pointerJelle Foks
Allows 'debug=1' for cx88-blackbird module (dev needs to be valid for dprintk). Fixes a null-pointer dereference when using debug=1. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4836): Added support for both DVB frontends of the Lifeview TrioNico Sabbi
This card (like some others) supports both, DVB-T and a DVB-S. The patch adds an insmod option to select the frontend: use_frontend=0 -> DVB-T use_frontend=1 -> DVB-S Signed-off-by: Nico Sabbi <nsabbi@tiscali.it> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4835): Added support for the Terratec Cinergy HT PCMCIA moduleHartmut Hackmann
This is a hybrid cardbus module. Besides the card support, i modified the definition names for AGC and GPIO of the tda10046. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4834): Cafe_ccic.c: make a function staticAdrian Bunk
This patch makes the needlessly global cafe_v4l_dev_release() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4833): Patch for SATELCO EasyWatch PCI (DVB-C)Thomas Hamm
Add support for Satelco EasyWatch PCI DVBC cards Signed-off-by: Thomas Hamm <thhamm@t-online.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4829): v4l2_type_names table is incompleteMauro Carvalho Chehab
Sliced VBI types are missing at the tables. Fixing it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4825): FIX bug 5760: audio were not working on some bttv driversMauro Carvalho Chehab
This fixes a bug introduced by the -git commit: bbf7871e1cd58b89f77b1152f457250c6e94b614 It seems that some bttv apps can't work fine when audioset=0. Thanks to Christian Casteyde <casteyde.christian@free.fr> for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4823): Add alternative device ID (0xb808) for AverMedia AverTV ↵Jose Carlos Garcia Sogo
Volar dongles. Add alternative device ID (0xb808) for AverMedia AverTV Volar dongles. Signed-off-by: Jose Carlos Garcia Sogo <jsogo@debian.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4819): Dib0700: Add support for new revision of Nova-T StickStefan Traby
Added support for Nova-T Stick with USB-pid: 0x7060 Signed-off-by: Stefan Traby <stefan@hello-penguin.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4812): Detect presence of IR receiver/IR transmitter in tveepromHans Verkuil
Thanks to input from Steven Toth from Hauppauge the tveeprom module has been extended to detect the presence of an IR transmitter (aka IR-blaster). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4806): Saa7134: add support for Hauppauge WinTV-HVR1110 DVB-T/HybridThomas Genty
This patch adds support for the Hauppauge WinTV-HVR1110 DVB-T/Hybrid Signed-off-by: Thomas Genty <tomlohave@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4805): Dib0700: Add support for Leadtek Winfast DTV Dongle ↵Michael Krufky
(STK7700P based) This patch adds support for the new, STK7700-based revision of the Leadtek Winfast DTV Dongle. Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4798): OmniVision OV7670 driverJonathan Corbet
This patch adds a V4L2 driver for the OmniVision OV7670 camera. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4797): Marvell 88ALP01 "cafe" driverJonathan Corbet
A driver for the Marvell M88ALP01 "CAFE" CMOS integrated camera controller. This driver has been renamed "cafe_ccic" since my previous patch set. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4794): Dvb: dibx000_common-fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4792): Add support for the Compro Videomate DVB-T200AHartmut Hackmann
This board has the same PCI ID as the T200, so the exact board type is determined from the eeprom. The original patch was provided by Francis Barber <fedora@barber-family.id.au> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4791): Added autodetected flag to the saa7134_dev structureHartmut Hackmann
In case the exact board type needs to be determined by probing or evaluating the eeprom, this flag allows to still set the board type via the card=xx insmod option. This is an extract of a patch by Francis Barber. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4789): Lgdt330x: SNR and signal strength reportingTrent Piepho
Update the SNR calculations to use the new dvb_math log function, and add SNR calculations for all supported modulations for both lg dt3302 and dt3303. The QAM equations don't appear in the dt3302 datasheet, so the ones from the dt3303 datasheet were used. SNR returned is the actual value in dB as 8.8 fixed point. Reporting of real signal strength isn't supported, so rather than return 0, which confuses some software and users, a re-scaled SNR value is returned. Code originally by Rusty Scott. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-10V4L/DVB (4788): Tda8083: support for uncorrectable blocks and bit error rateChristoph Haubrich
Copied routines for uc blocks and BER from the removed tda80xx.c into tda8083.c. Signed-off-by: Christoph Haubrich <christoph1.haubrich@arcor.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 05:37:47 +0000