aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-09-28[IPV4]: inet_addr_type() annotationsAl Viro
argument and inferred net-endian variables in callers annotated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[IPV4]: annotate inetdev.h helpersAl Viro
inet_confirm_addr(), inet_ifa_byprefix(), ip_dev_find(), inet_make_mask() and inet_ifa_match() annotated, along with inferred net-endian variables Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[IPV4]: annotate struct in_ifaddrAl Viro
ifa_local, ifa_address, ifa_mask, ifa_broadcast and ifa_anycast are net-endian. Annotated them and variables that are inferred to be net-endian. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[ATALK]: endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[NETDEV] config: revert part of previous patchRandy Dunlap
Net devices should depend on NETDEVICES, so revert part of Paolo's previous patch. See http://marc.theaimsgroup.com/?l=linux-kernel&m=115566326218740&w=2 for history. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28[IRDA] via-ircc: fix memory leakChuck Short
Fix memory leak. Coverity id# 653 patch location: http://www.kernel.org/git/?p=linux/kernel/git/bcollins/ubuntu-dapper.git;a=commitdiff;h=a1f34cb68b16807ed9d5ebb0f6a6ec5ff8a5fc78 Signed-off-by: Chuck Short <zulcss@gmail.com> Signed-off-by: Ben Collins <bcollins@ubuntu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-28Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/hwmon-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/hwmon-2.6: (39 commits) hwmon: Remove Yuan Mu's address hwmon: Fix unchecked return status, SMSC chips hwmon: Fix unchecked return status, batch 6 w83792d: Fix unchecked return status w83l785ts: Fix unchecked return status w83781d: Fix unchecked return status vt8231: Fix unchecked return status Fix unchecked return status, batch 5 hwmon: Fix unchecked return status, batch 4 hwmon: Fix unchecked return status, batch 3 hwmon: Fix unchecked return status, batch 2 w83627ehf: Fix unchecked return status pc87360: Check for error on sysfs files creation pc87360: Delete sysfs files on device deletion pc87360: Move some code around hwmon: Fix unchecked return status, batch 1 vt1211: Document module parameters vt1211: Add documentation hwmon: New driver for the VIA VT1211 w83791d: Documentation update ...
2006-09-28USB: g_file_storage: Set sense info Valid bit only when neededAlan Stern
Strictly speaking, the Valid bit in SCSI sense data is supposed to be set only when the Information field contains a valid number. This patch (as793) turns off the Valid bit when the Information field hasn't been set. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: fix autosuspend when CONFIG_PM isn't setAlan Stern
This patch (as791b) fixes things up to avoid compiler warnings or errors when CONFIG_USB_SUSPEND or CONFIG_PM isn't set. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28OHCI: add auto-stop supportAlan Stern
This patch (as790b) adds "autostop" support to ohci-hcd: the driver will automatically stop the host controller when no devices have been connected for at least one second. This feature is useful when the USB autosuspend facility isn't available, such as when CONFIG_USB_SUSPEND hasn't been set. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28OHCI: remove existing autosuspend codeAlan Stern
The autosuspend technique used by ohci-hcd doesn't mesh well with the newer USB core autosuspend code. This patch (as789) removes ohci-hcd's autosuspend support. Now the driver will be usable, but it won't automatically go into a low-power state when no devices are connected. That's for a later patch. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: allow both root-hub interrupts and pollingAlan Stern
Originally I didn't think any host controller driver would ever use interrupts and polling at the same time, but it turns out ohci-hcd wants to do exactly that. This patch (as788) makes it possible. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: g_file_storage: fix "ignoring return value" warningsAlan Stern
This patch (as792) fixes "ignoring return value" warnings in file_storage.c. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: dummy-hcd: fix "warn-unused-result" messagesAlan Stern
This patch (as758) fixes the "warn-unused-result" messages in dummy-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: create new workqueue thread for USB autosuspendAlan Stern
This patch (as787) creates a new workqueue thread to handle delayed USB autosuspend requests. Previously the code used keventd. However it turns out that the hub driver's suspend routine calls flush_scheduled_work(), making it a poor candidate for running in keventd (the call immediately deadlocks). The solution is to use a new thread instead of keventd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB Storage: unusual_devs.h entry for Sony Ericsson P990iJan Mate
USB Storage: this patch adds support for Sony Ericsson P990i Signed-off-by: Jan Mate <mate@fiit.stuba.sk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: microtek usb scanner: Scsi_Cmnd conversionHenrik Kretzschmar
Converts obsolete typedef'd Scsi_Cmnd into struct scsi_cmnd. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: fixes kerneldoc errors in usbcore-auto(susp/res)-patchHenrik Kretzschmar
Fixes kerneldoc errors on usb/core/driver.c, which occured in 2.6.18-rc6-mm2 gregkh-usb-usbcore-add-autosuspend-autoresume-infrastructure.patch Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: add Raritan KVM USB Dongle to the HID_QUIRK_NOGET blacklistRaghavendra Biligiri
During Installation the host tries to enumerate the keyboard/mouse dongle for the Raritan KVM.At this time timeouts have been observed Adding the Raritan KVM USB dongle to the blacklist fixes this issue. Signed-off-by: Raghavendra Biligiri <Raghavendra_Biligiri@Dell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: asix - Add alternate device IDs for Dlink DUB-E100 Rev B1David Hollis
Add alternate device IDs for Dlink DUB-E100 Rev B1 Signed-off-by: David Hollis <dhollis@davehollis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28usb-serial: possible irq lock inversion (PPP vs. usb/serial)Peter Zijlstra
========================================================= [ INFO: possible irq lock inversion dependency detected ]
2006-09-28ohci: Use ref-counting hotplug safe interfacesAlan Cox
We want to avoid legacy APIs like pci_find_slot(). Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: Fix alignment of buffer passed down to ->hub_control()Mikael Pettersson
Implementations assume the buffer is at least 4 byte aligned. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: add SeaLevel 2106 SeaLINK support to ftdi_sioJustin Carlson
We have a couple of these USB-Serial converters around; they're slightly different from the 2104 models in that they can handle 500Kb/sec over RS422. The existing ftdi driver seems to work just fine if we add in the appropriate IDs. Patch is against 2.6.17.6, but should apply cleanly to pretty much anything recent. From: Justin Carlson <justinca@qatar.cmu.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: New PhidgetKit 8/8/8 reset outputs after 2 secondsSean Young
New phidget interface kits (type 8/8/8) reset their outputs if they haven't received a set report for 2 seconds. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: another device ID for ipaqMatthias Urlichs
Add yet another device ID to the ipaq USB-serial driver. Signed-Off-By: Matthias Urlichs <matthias@urlichs.de> Cc: Ganesh Varadarajan <ganesh@veritas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB serial ftdi_sio: Add support for Tactrix OpenPort devicesIan Abbott
This patch adds support for three OpenPort ECU data cables from Tactrix Inc. to the ftdi_sio driver's device ID table. One of the PIDs was supplied by Donour Sizemore on the ftdi-usb-sio-devel mailing list. The other two were added by myself after examining the Windows driver software. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: Pegasus driver failing for ADMtek 8515 network devicePetko Manolov
Address http://bugzilla.kernel.org/show_bug.cgi?id=7126 Attempting to read the ethernet ID directly from the eeprom somehow confuses ADM8515. Subsequent read requests to either the eeprom or the MII fail as well. Didn't dig much deeper, though. For example ADM8513 does not experience this problem. I used the fact that at power up the device is reading its ID automatically (not true for older Pegasus based devices) and put it in the Ethernet ID registers. So now the driver uses get_registers() instead of read_eprom_word() if the device is Pegasus_II based one. Tested it with all (Pegasus and Pegasus_II) gadgets i have and everything seems ok. Cc: <jogeedaklown@yahoo.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: unusual-devs entry for Nokia E60Alan Stern
This patch (as794) adds an unusual_devs entry for the Nokia E60. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: Add vendor / product ID to pl2303Wesley PA4WDH
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28USB: new id for kawethOliver Neukum
this adds a new id to the kaweth driver. Please apply. Signed-Off-By: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Remove Yuan Mu's addressJean Delvare
hwmon: Remove Yuan Mu's address Yuan Mu no longer works at Winbond. I wish to publicly thank Yuan for his help with Winbond hardware monitoring chips support during the past 10 months. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Fix unchecked return status, SMSC chipsJean Delvare
hwmon: Fix unchecked return status, SMSC chips Fix up 2 more hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Fix unchecked return status, batch 6Jean Delvare
hwmon: Fix unchecked return status, batch 6 Fix up 5 more hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28w83792d: Fix unchecked return statusRudolf Marek
w83792d: Fix unchecked return status Fix the w83792d driver. Add error checking to device_create_file and also care to destroy the files upon exit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28w83l785ts: Fix unchecked return statusRudolf Marek
w83l785ts: Fix unchecked return status Fix the w83l785ts driver. Add error checking to device_create_file and also care to destroy the files upon exit. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28w83781d: Fix unchecked return statusJim Cromie
w83781d: Fix unchecked return status Add 2 attr-file groups (for base and model-specific attrs respectively), create the base group with single call to sysfs_create_group, check the return code on individual calls to device_create_file for each of the model-specific attr-files. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28vt8231: Fix unchecked return statusRoger Lucas
vt8231: Fix unchecked return status Check the return status from device_create_file() and also use the newer and cleaner sysfs creation functions. Signed-off-by: Roger Lucas <roger@planbit.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28Fix unchecked return status, batch 5Jean Delvare
hwmon: Fix unchecked return status, batch 5 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Fix unchecked return status, batch 4Jean Delvare
hwmon: Fix unchecked return status, batch 4 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Note: f71805f actually checked the status from device_create_file already. However it did not remove the files on device destruction. It was also an opportunity to use sysfs_create/remove_group instead of hand-made loops. This makes the changes much more important but I think the result is worth it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Fix unchecked return status, batch 3Mark M. Hoffman
hwmon: Fix unchecked return status, batch 3 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Fix unchecked return status, batch 2Mark M. Hoffman
hwmon: Fix unchecked return status, batch 2 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28w83627ehf: Fix unchecked return statusDavid Hubbard
w83627ehf: Fix unchecked return status Fix: check return value from device_create_file() Fix: call device_remove_file() on error and module unload Fix: call hwmon_device_register() after device_create_file() to eliminate race Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28pc87360: Check for error on sysfs files creationJim Cromie
pc87360: Check for error on sysfs files creation Use sysfs_create_group() for 2 sensor-types which are chip-model invariant, i.e. all-or-nothing attribute groups. Other 2 groups vary too much due to configuration, etc, so we keep the loops of device_create_file(), but now check their returns. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28pc87360: Delete sysfs files on device deletionJim Cromie
pc87360: Delete sysfs files on device deletion Add 4 explicit attribute groups for the 5 sensor types: voltage (in), therm, temp, and fan & pwm (together in one group). Use sysfs_remove_group() to drop them, but keeps the existing startup code, which calls device_create_file in loops. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28pc87360: Move some code aroundJim Cromie
pc87360: Move some code around Moves code for get-set-decl tuples for 3 items: cpu0_vid, vrm, alarms_in up, to just after the get-set-decl tuple for voltages. These items are already 'activated' together with the rest of the voltage attributes, so the move tightens the grouping that's made explicit in next patch. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Fix unchecked return status, batch 1Mark M. Hoffman
hwmon: Fix unchecked return status, batch 1 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: New driver for the VIA VT1211Juerg Haefliger
hwmon: New driver for the VIA VT1211 This is a new driver for the VIA VT1211 Super-IO chip. It is a rewrite of the existing vt1211 driver (by Mark D. Studebaker and Lars Ekman) which has been around for a while but never made it into the main kernel tree. It is implemented as a platform driver and therefore requires lm_sensors 2.10.1 to function properly. Signed-off-by: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28w83791d: Documentation updateCharles Spirakis
w83791d: Documentation update The alarm bits and the beep enable bits are in different positions in the hardware. Document the problem and leave it to the user-space code to handle the situation. When this driver is updated to the standardized sysfs alarm/beep methodology, this won't be a problem. This is a documentation only change. Signed-off by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-28hwmon: Add individual alarm files to 4 driversJean Delvare
hwmon: Add individual alarm files to 4 drivers Add individual sysfs files for all f71805f, lm63, lm83 and lm90 alarm and fault conditions. This is a requirement for the planned chip-independent libsensors. Almost all other hwmon drivers will need the same improvement. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 02:52:12 +0000