aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-07Merge branch 'pxa-palm' into pxa-machinesRussell King
Conflicts: drivers/mfd/Kconfig drivers/pcmcia/Makefile
2008-10-07Merge branch 'pxa-trizeps' into pxa-machinesRussell King
Conflicts: drivers/pcmcia/Makefile
2008-10-07Merge branches 'metronomefb', 'pxa-cm2xx', 'pxa-gumstix', 'pxa-misc', ↵Russell King
'pxa-mitac', 'pxa-mp900', 'pxa-zylonite' and 'pxa-zaurus' into pxa-machines Conflicts: arch/arm/mach-pxa/poodle.c
2008-10-07[ARM] pxa: trizeps4: remove unused variableRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] 5283/1: pxa: add CM-X255 pcmcia supportMike Rapoport
Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] 5282/1: pxa: add CM-X255 supportMike Rapoport
Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] 5294/1: Trizeps4 PCMCIA supportJürgen Schindele
Support for Trizeps4 SOM PCMCIA with ConXS or other baseboards. with double GPIO-free fixed (sorry!) replaces 5279/1 Signed-off-by: Jurgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02[ARM] 5248/1: wm97xx generic battery driverMarek Vašut
This patch adds generic battery driver for wm97xx chips. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-25[ARM] corgi_lcd: use GPIO API for BACKLIGHT_ON and BACKLIGHT_CONTEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23[ARM] pxa/spitz: use leds-gpio for led driving and drop leds-spitzEric Miao
Now as the scoop pins are covered by the generic gpio API, we can use leds-gpio driver instead of special leds-spitz Drop leds-spitz.c and the declarations of now un-referenced spitzscoop_device, spitzscoop2_device. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23[ARM] pxa/corgi: use leds-gpio for led driving and drop leds-corgiEric Miao
Now as the scoop pins are covered by the generic gpio API, we can use leds-gpio driver instead of special leds-corgi Drop leds-corgi.c and remove the declaration of now un-referenced corgiscoop_device. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23hwmon: add max1111_read_channel() for use by sharpsl_pmEric Miao
This is not generic, and is added here for backward compatibility. It is made an individual commit here to make it easier for revert once the sharpsl_pm gets generic enough. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23hwmon: add max1111 Low-power Multichannel Serial 8-bit ADCsEric Miao
Driver based on corgi_ssp.c and sharpsl_pm.c, previously done by Richard Purdie and many others. Now changed to generic HWMON device and expose all the ADC input value through sysfs. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23lcd: add support for Toppoly TDO24M series LCD panelsEric Miao
This type of LCD panel can be found on PXA3xx/Littleton platforms. Add LCD device and SPI-based driver for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23lcd: add corgibl_limit_intensity() to corgi_lcdEric Miao
This is not generic enough, added here for backward compatibility. And make this an individual commit so future revert will be a bit easier. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23lcd: add SPI-based LCD and backlight driver for SHARP corgi/spitzEric Miao
The driver is based on different source files including corgi_ssp.c, corgi_lcd.c and corgi_bl.c, previously authored by Richard Purdie and many others. The LCD and Backlight device actually share the same SPI device, so they are made into this single driver. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-23lcd: allow lcd device to handle mode change eventsEric Miao
Some LCD panels are capable of different resolutions, and is allowed to change at run-time, so to make "struct lcd_device" to be able to handle mode change events here. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-17Input: ads7846 - introduce .gpio_pendown to get pendown stateEric Miao
The GPIO connected to ADS7846 nPENIRQ signal is usually used to get the pendown state as well. Introduce a .gpio_pendown, and use this to decide the pendown state if .get_pendown_state is NULL. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-09Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix memmap=exactmap boot argument x86: disable static NOPLs on 32 bits xen: fix 2.6.27-rc5 xen balloon driver warnings
2008-09-09[S390] cio: allow offline processing for disconnected devicesPeter Oberparleiter
When disconnected ccw devices are removed, the device has to be set offline, otherwise there will be side effects including a reference count imbalance. This patch modifies ccw_device_offline to work for devices in disconnecte/not operational state. ccw_device_offline is called by cio for devices which are online during device removal. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-09-09[S390] cio: handle ssch() return codes correctly.Cornelia Huck
ssch() has two classes of return codes: - condition codes (0-3) which need to be translated to Linux error codes - Linux error codes (-EIO on exceptions) which should be passed to the caller (instead of erronously being handled like condition code 3) Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-09-09[S390] cio: Correct cleanup on error.Cornelia Huck
Fix cleanup on error in chp_new() and init_channel_subsystem() (must not call kfree() on structures that had been registered). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-09-08Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5241/1: provide ioremap_wc() [ARM] omap: fix virtual vs physical address space confusions [ARM] remove unused #include <version.h> [ARM] omap: fix build error in ohci-omap.c [ARM] omap: fix gpio.c build error
2008-09-08Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: RAID mode SATA patch for Intel Ibex Peak DeviceIDs pata_sil680: remove duplicate pcim_enable_device libata-sff: kill spurious WARN_ON() in ata_hsm_move() sata_nv: disable hardreset for generic ahci: disable PMP for marvell ahcis sata_mv: add RocketRaid 1720 PCI ID to driver ahci, pata_marvell: play nicely together
2008-09-08usb: fix null deferences in low level usb serialJason Wessel
The hw interface drivers for the usb serial devices deference the tty structure to set up the parameters for the initial console. The tty structure should be passed as a parameter to the set_termios() call. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-08xen: fix 2.6.27-rc5 xen balloon driver warningsJeremy Fitzhardinge
Set the class so it doesn't clash with the normal memory class. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> ===================================================================
2008-09-08ahci: RAID mode SATA patch for Intel Ibex Peak DeviceIDsSeth Heasley
Add the Intel Ibex Peak (PCH) SATA RAID Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-08pata_sil680: remove duplicate pcim_enable_deviceDavid Milburn
Remove duplicate call to pcim_enable_device in sil680_init_one. Signed-off-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-08libata-sff: kill spurious WARN_ON() in ata_hsm_move()Tejun Heo
On HSM_ST_ERR, ata_hsm_move() triggers WARN_ON() if AC_ERR_DEV or AC_ERR_HSM is not set. PHY events may trigger HSM_ST_ERR with other error codes and, with or without it, there just isn't much reason to do WARN_ON() on it. Even if error code is not set there, core EH logic won't have any problem dealing with the error condition. OSDL bz#11065 reports this problem. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-08sata_nv: disable hardreset for genericTejun Heo
of them being unifying probing, hotplug and EH reset paths uniform. Previously, broken hardreset could go unnoticed as it wasn't used during probing but when something goes wrong or after hotplug the problem will surface and bite hard. OSDL bug 11195 reports that sata_nv generic flavor falls into this category. Hardreset itself succeeds but PHY stays offline after hardreset. I tried longer debounce timing but the result was the same. http://bugzilla.kernel.org/show_bug.cgi?id=11195 So, it seems we'll have to drop hardreset from the generic flavor. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-08ahci: disable PMP for marvell ahcisTejun Heo
Marvell ahcis don't play nicely with PMPs. Disable it. Reported by KueiHuan Chen in the following thread. http://thread.gmane.org/gmane.linux.ide/33296 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: KueiHuan Chen <kueihuan.chen@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-08sata_mv: add RocketRaid 1720 PCI ID to driverMark Lord
Signed-off-by: Petr Jelen <petr.jelen@gmail.com> Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-08ahci, pata_marvell: play nicely togetherAlan Cox
I've been chasing Jeff about this for months. Jeff added the Marvell device identifiers to the ahci driver without making the AHCI driver handle the PATA port. This means a lot of users can't use current kernels and in most distro cases can't even install. This has been going on since March 2008 for the 6121 Marvell, and late 2007 for the 6145!!! This was all pointed out at the time and repeatedly ignored. Bugs assigned to Jeff about this are ignored also. To quote Jeff in email > "Just switch the order of 'ahci' and 'pata_marvell' in > /etc/modprobe.conf, then use Fedora's tools regenerate the initrd. > See? It's not rocket science, and the current configuration can be > easily made to work for Fedora users." (Which isn't trivial, isn't end user, shouldn't be needed, and as it usually breaks at install time is in fact impossible) To quote Jeff in August 2007 > " mv-ahci-pata > Marvell 6121/6141 PATA support. Needs fixing in the 'PATA controller > command' area before it is usable, and can go upstream." Only he add the ids anyway later and caused regressions, adding a further id in March causing more regresions. The actual fix for the moment is very simple. If the user has included the pata_marvell driver let it drive the ports. If they've only selected for SATA support give them the AHCI driver which will run the port a fraction faster. Allow the user to control this decision via ahci.marvell_enable as a module parameter so that distributions can ship 'it works' defaults and smarter users (or config tools) can then flip it over it desired. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - make Lenovo 3000 N100 blacklist entry more specific Input: bcm5974 - add BTN_TOUCH event for mousedev benefit Input: bcm5974 - improve finger tracking and counting Input: bcm5974 - small formatting cleanup Input: bcm5974 - add maintainer entry
2008-09-06Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource, acpi_pm.c: check for monotonicity clocksource, acpi_pm.c: use proper read function also in errata mode ntp: fix calculation of the next jiffie to trigger RTC sync x86: HPET: read back compare register before reading counter x86: HPET fix moronic 32/64bit thinko clockevents: broadcast fixup possible waiters HPET: make minimum reprogramming delta useful clockevents: prevent endless loop lockup clockevents: prevent multiple init/shutdown clockevents: enforce reprogram in oneshot setup clockevents: prevent endless loop in periodic broadcast handler clockevents: prevent clockevent event_handler ending up handler_noop
2008-09-06clocksource, acpi_pm.c: check for monotonicityDominik Brodowski
The current check for monotonicity is way too weak: Andreas Mohr reports ( http://lkml.org/lkml/2008/8/10/77 ) that on one of his test systems the current check only triggers in 50% of all cases, leading to catastrophic timer behaviour. To fix this issue, expand the check for monotonicity by doing ten consecutive tests instead of one. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-06clocksource, acpi_pm.c: use proper read function also in errata modeDominik Brodowski
On all hardware (some Intel ICH4, PIIX4 and PIIX4E chipsets) affected by a hardware errata there's about a 4.2% chance that initialization of the ACPI PMTMR fails. On those chipsets, we need to read out the timer value at least three times to get a correct result, for every once in a while (i.e. within a 3 ns window every 69.8 ns) the read returns a bogus result. During normal operation we work around this issue, but during initialization reading a bogus value may lead to -EINVAL even though the hardware is usable. Thanks to Andreas Mohr for spotting this issue. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-05drivers/mmc/card/block.c: fix refcount leak in mmc_block_open()Andrew Morton
mmc_block_open() increments md->usage although it returns with -EROFS when default mounting a MMC/SD card with write protect switch on. This reference counting bug prevents /dev/mmcblkX from being released on card removal, and situation worsen with reinsertion until the minor number range runs out. Reported-by: <sasin@solomon-systech.com> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-05atmel_lcdfb: fix oops in rmmod when framebuffer fails to registerStanislaw Gruszka
If framebuffer registration failed in platform driver ->probe() callback, dev_get_drvdata() points to freed memory region, but ->remove() function try to use it and the following oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000228 pgd = c3a20000 [00000228] *pgd=23a2b031, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] Modules linked in: atmel_lcdfb(-) cfbcopyarea cfbimgblt cfbfillrect [last unloaded: atmel_lcdfb] CPU: 0 Not tainted (2.6.27-rc2 #116) PC is at atmel_lcdfb_remove+0x14/0xf8 [atmel_lcdfb] LR is at platform_drv_remove+0x20/0x24 pc : [<bf006bc4>] lr : [<c0157d28>] psr: a0000013 sp : c3a45e84 ip : c3a45ea0 fp : c3a45e9c r10: 00000002 r9 : c3a44000 r8 : c0026c04 r7 : 00000880 r6 : c02bb228 r5 : 00000000 r4 : c02bb230 r3 : bf007e3c r2 : c02bb230 r1 : 00000004 r0 : c02bb228 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 23a20000 DAC: 00000015 Process rmmod (pid: 6799, stack limit = 0xc3a44260) Stack: (0xc3a45e84 to 0xc3a46000) 5e80: c02bb230 bf007e3c bf007e3c c3a45eac c3a45ea0 c0157d28 bf006bc0 5ea0: c3a45ec4 c3a45eb0 c0156d20 c0157d18 c02bb230 c02bb2d8 c3a45ee0 c3a45ec8 5ec0: c0156da8 c0156cb8 bf007e3c bf007ee0 c02c8e14 c3a45efc c3a45ee4 c0156018 5ee0: c0156d50 bf007e3c bf007ee0 00000000 c3a45f18 c3a45f00 c0157220 c0155f9c 5f00: 00000000 bf007ee0 bf008000 c3a45f28 c3a45f1c c0157e34 c01571ec c3a45f38 5f20: c3a45f2c bf006ba8 c0157e30 c3a45fa4 c3a45f3c c005772c bf006ba4 656d7461 5f40: 636c5f6c 00626664 c004c988 c3a45f80 c3a45f5c 00000000 c3a45fb0 00000000 5f60: ffffffff becaccd8 00000880 00000000 000a5e80 00000001 bf007ee0 00000880 5f80: c3a45f84 00000000 becaccd4 00000002 000003df 00000081 00000000 c3a45fa8 5fa0: c0026a60 c0057584 00000002 000003df 00900081 000a5e80 00000880 00000000 5fc0: becaccd4 00000002 000003df 00000000 000a5e80 00000001 00000002 0000005f 5fe0: 4004f5ec becacbe8 0001a158 4004f5fc 20000010 00900081 f9ffbadf 7bbfb2bb Backtrace: [<bf006bb0>] (atmel_lcdfb_remove+0x0/0xf8 [atmel_lcdfb]) from [<c0157d28>] (platform_drv_remove+0x20/0x24) r6:bf007e3c r5:bf007e3c r4:c02bb230 [<c0157d08>] (platform_drv_remove+0x0/0x24) from [<c0156d20>] (__device_release_driver+0x78/0x98) [<c0156ca8>] (__device_release_driver+0x0/0x98) from [<c0156da8>] (driver_detach+0x68/0x90) r5:c02bb2d8 r4:c02bb230 [<c0156d40>] (driver_detach+0x0/0x90) from [<c0156018>] (bus_remove_driver+0x8c/0xb4) r6:c02c8e14 r5:bf007ee0 r4:bf007e3c [<c0155f8c>] (bus_remove_driver+0x0/0xb4) from [<c0157220>] (driver_unregister+0x44/0x48) r6:00000000 r5:bf007ee0 r4:bf007e3c [<c01571dc>] (driver_unregister+0x0/0x48) from [<c0157e34>] (platform_driver_unregister+0x14/0x18) r6:bf008000 r5:bf007ee0 r4:00000000 [<c0157e20>] (platform_driver_unregister+0x0/0x18) from [<bf006ba8>] (atmel_lcdfb_exit+0x14/0x1c [atmel_lcdfb]) [<bf006b94>] (atmel_lcdfb_exit+0x0/0x1c [atmel_lcdfb]) from [<c005772c>] (sys_delete_module+0x1b8/0x22c) [<c0057574>] (sys_delete_module+0x0/0x22c) from [<c0026a60>] (ret_fast_syscall+0x0/0x2c) r7:00000081 r6:000003df r5:00000002 r4:becaccd4 Code: e92dd870 e24cb004 e59050c4 e1a06000 (e5954228) ---[ end trace 85476b184d9e68d8 ]--- This patch fixes the oops. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-05forcedeth: fix kexec regressionRafael J. Wysocki
Fix regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=11361 and caused by commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 ("[netdrvr] forcedeth: setup wake-on-lan before shutting down") that makes network adapters integrated into the NVidia MCP55 chipsets fail to work in kexeced kernels. The problem appears to be that if the adapter is put into D3_hot during ->shutdown(), it cannot be brought back into D0 after kexec (ref. http://marc.info/?l=linux-kernel&m=121900062814967&w=4). Therefore, only put forcedeth into D3 during ->shutdown() if the system is to be powered off. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-05Merge git://git.infradead.org/~dwmw2/dwmw2-2.6.27Linus Torvalds
* git://git.infradead.org/~dwmw2/dwmw2-2.6.27: Revert "[ARM] use the new byteorder headers" Fix conditional export of kvh.h and a.out.h to userspace. [MTD] [NAND] tmio_nand: fix base address programming
2008-09-05Merge branch 'sh/for-2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: i2c: fix i2c-sh_mobile timing issues sh64: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y. sh: resume_kernel fix for kernel oops built with CONFIG_BKL_PREEMPT=y. sh: fix semtimedop syscall sh: update AP325RXA defconfig sh: update Migo-R defconfig sh: fix platform_resource_setup_memory() section mismatch sh: fix kexec entry point for crash kernels sh: crash kernel resource fix sh: fix ptrace_64.c:user_disable_single_step() sh64: re-add the __strnlen_user() prototype
2008-09-05Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (98 commits) V4L/DVB (8881): gspca: After 'while (retry--) {...}', retry will be -1 but not 0. V4L/DVB (8880): PATCH: Fix parents on some webcam drivers V4L/DVB (8877): b2c2 and bt8xx: udelay to mdelay V4L/DVB (8876): budget: udelay changed to mdelay V4L/DVB (8874): gspca: Adjust hstart for sn9c103/ov7630 and update usb-id's. V4L/DVB (8873): gspca: Bad image offset with rev012a of spca561 and adjust exposure. V4L/DVB (8872): gspca: Bad image format and offset with rev072a of spca561. V4L/DVB (8870): gspca: Fix dark room problem with sonixb. V4L/DVB (8869): gspca: Move the Sonix webcams with TAS5110C1B from sn9c102 to gspca. V4L/DVB (8868): gspca: Support for vga modes with sif sensors in sonixb. V4L/DVB (8844): dabusb_fpga_download(): fix a memory leak V4L/DVB (8843): tda10048_firmware_upload(): fix a memory leak V4L/DVB (8842): vivi_release(): fix use-after-free V4L/DVB (8840): dib0700: add basic support for Hauppauge Nova-TD-500 (84xxx) V4L/DVB (8839): dib0700: add comment to identify 35th USB id pair V4L/DVB (8837): dvb: fix I2C adapters name size V4L/DVB (8835): gspca: Same pixfmt as the sn9c102 driver and raw Bayer added in sonixb. V4L/DVB (8834): gspca: Have a bigger buffer for sn9c10x compressed images. V4L/DVB (8833): gspca: Cleanup the sonixb code. V4L/DVB (8832): gspca: Bad pixelformat of vc0321 webcams. ...
2008-09-05Merge branch 'release-2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6 * 'release-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-acpi-2.6: acer-wmi: remove debugfs entries upon unloading ACPI: Avoid bogus timeout about SMbus check fujitsu-laptop: fix regression for P8010 in 2.6.27-rc ACPI: Make Len Brown the ACPI maintainer again ACPI: thinkpad-acpi: wan radio control is not experimental PNPACPI: ignore the producer/consumer bit for extended IRQ descriptors acpi: add checking for NULL early param ACPI: Fix typo in "Disable MWAIT via DMI on broken Compal board" ACPI: Fix now signed module parameter. ACPI: Change package length error to warning ACPI: Fix now signed module parameter.
2008-09-05[MTD] [NAND] tmio_nand: fix base address programmingDmitry Baryshkov
Fix offset of second word used for programming base address of memory window. Also program tmio with offset of the FCR, not with physical memory location. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Ian Molton <spyro@f2s.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-05i2c: fix i2c-sh_mobile timing issuesMagnus Damm
This patch teaches the i2c-sh_mobile driver to make use of wait irqs. Without this patch only dte irqs are used which may lead to overruns and cases of missing stop and extra bytes being read on the i2c bus. Use of wait irqs forces the hardware to pause and wait until the cpu is ready. Polling is also reworked in this patch to fix ms delay issues. Verified with bus analyzer and tested on MigoR and AP325RXA boards. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-04Input: i8042 - make Lenovo 3000 N100 blacklist entry more specificJiri Kosina
Apparently, there are more different versions of Lenovo 3000 N100, some of them working properly with active mux, and some of them requiring it being switched off. This patch applies 'nomux' only to the specific product name that is reported to behave badly unless 'nomux' is specified. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-04Input: bcm5974 - add BTN_TOUCH event for mousedev benefitHenrik Rydberg
The mousedev driver requires the use of BTN_TOUCH events to process ABS_X and ABS_Y events properly, which is what is needed for the bcm5974-based apple computers to have a functional pointer out-of-the-box. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-04Input: bcm5974 - improve finger tracking and countingHenrik Rydberg
The problem of finger tracking, i.e., when to switch focus from one finger to another on the trackpad, has been improved by utilizing more information from the bcm5974 chip output. This results in less pointer hopping when many fingers are on the trackpad. In addition, a finger counting method based on pressure information from all fingers is introduced. Together with a pressure hysteresis window, this yields a more stable counting of the number of fingers on the trackpad. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-04Input: bcm5974 - small formatting cleanupHenrik Rydberg
Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>