aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-11-13[PATCH] mspec driver build fixJes Sorensen
Fix MSPEC driver to build for non SN2 enabled configs as the driver should work in cached and uncached modes (no fetchop) on these systems. In addition make MSPEC select IA64_UNCACHED_ALLOCATOR, which is required for it and move it to arch/ia64/Kconfig to avoid warnings on non ia64 architectures running allmodconfig. Once the Kconfig code is fixed, we can move it back. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] pci: don't try to remove sysfs files before they are setup.David Miller
The PCI sysfs attributes are created after the initial PCI bus scan. With the addition of more return value checking and assertions in the device and sysfs layers we now can get dumps like this on sparc64: [ 20.135032] Call Trace: [ 20.135042] [0000000000537f88] pci_remove_bus_device+0x30/0xc0 [ 20.135076] [000000000078f890] pci_fill_in_pbm_cookies+0x98/0x440 [ 20.135109] [000000000042e828] sabre_scan_bus+0x230/0x400 [ 20.135139] [000000000078c710] pcibios_init+0x58/0xa0 [ 20.135159] [0000000000416f14] init+0x9c/0x2e0 [ 20.135190] [0000000000417a50] kernel_thread+0x38/0x60 [ 20.135211] [0000000000417170] rest_init+0x18/0x40 [ 20.135514] PCI0(PBMB): Bus running at 33MHz It's triggering because removal of the "config" PCI sysfs file for the device fails. On sparc64, after probing the device, we'll delete the PCI device via pci_remove_bus_device() if we cannot find the firmware device tree node corresponding to it. This is fine, but at this point the sysfs files for the PCI device won't be setup yet. So we should not try to do anything in pci_remove_sysfs_dev_files() if pci_sysfs_init() has not run yet. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] IB/ipath - program intconfig register using new HT irq hookBryan O'Sullivan
Eric's changes to the htirq infrastructure require corresponding modifications to the ipath HT driver code so that interrupts are still delivered properly. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] htirq: allow buggy drivers of buggy hardware to write the registersEric W. Biederman
This patch adds a variant of ht_create_irq __ht_create_irq that takes an aditional parameter update that is a function that is called whenever we want to write to a drivers htirq configuration registers. This is needed to support the ipath_iba6110 because it's registers in the proper location are not actually conected to the hardware that controlls interrupt delivery. [bos@serpentine.com: fixes] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Cc: <olson@pathscale.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] htirq: refactor so we only have one function that writes to the chipEric W. Biederman
This refactoring actually optimizes the code a little by caching the value that we think the device is programmed with instead of reading it back from the hardware. Which simplifies the code a little and should speed things up a bit. This patch introduces the concept of a ht_irq_msg and modifies the architecture read/write routines to update this code. There is a minor consistency fix here as well as x86_64 forgot to initialize the htirq as masked. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Acked-by: Bryan O'Sullivan <bos@pathscale.com> Cc: <olson@pathscale.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] ipmi_si_intf.c: fix "&& 0xff" typosAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] IPMI: retry messages on certain error returnsCorey Minyard
Some more errors from the IPMI send message command are retryable, but are not being retried by the IPMI code. Make sure they get retried. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Frederic Lelievre <Frederic.Lelievre@ca.kontron.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] IPMI: Clean up the waiting message queue properly on unloadCorey Minyard
A wrong function was being used to free a list; this fixes the problem. Otherwise, an oops at unload time was possible. But not likely, since you can't have any users when you unload the modules and it is very hard to get messages into this queue without users. Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Patrick Schoeller <Patrick.Schoeller@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] md: do not freeze md threads for suspendRafael J. Wysocki
If there's a swap file on a software RAID, it should be possible to use this file for saving the swsusp's suspend image. Also, this file should be available to the memory management subsystem when memory is being freed before the suspend image is created. For the above reasons it seems that md_threads should not be frozen during the suspend and the appended patch makes this happen, but then there is the question if they don't cause any data to be written to disks after the suspend image has been created, provided that all filesystems are frozen at that time. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] md: fix sizing problem with raid5-reshape and CONFIG_LBD=nNeilBrown
I forgot to has the size-in-blocks to (loff_t) before shifting up to a size-in-bytes. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] md: change ONLINE/OFFLINE events to a single CHANGE eventNeilBrown
It turns out that CHANGE is preferred to ONLINE/OFFLINE for various reasons (not least of which being that udev understands it already). So remove the recently added KOBJ_OFFLINE (no-one is likely to care anyway) and change the ONLINE to a CHANGE event Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Neil Brown <neilb@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] drivers/telephony/ixj: fix an array overrunAdrian Bunk
The Coverity checker noted that in drivers/telephony/ixj.c:ixj_build_filter_cadence(), filter_en[4] or filter_en[5] could be written to. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] dm: raid1: fix waiting for io on suspendJonathan E Brassow
All device-mapper targets must complete outstanding I/O before suspending. The mirror target generates I/O in its recovery phase and fails to wait for it. It needs to be tracked so we can ensure that it has completed before we suspend. [akpm@osdl.org: cleanup] Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <dm-devel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] dm: multipath: fix rr_add_path orderJonathan E Brassow
When adding paths to the round-robin path selector, their order gets inverted, which is not desirable. Fix by replacing list_add() with list_add_tail(). Signed-off-by: Jonathan E Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <dm-devel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] dm: suspend: fix error pathAlasdair G Kergon
If the device is already suspended, just return the error and skip the code that would incorrectly wipe md->suspended_bdev. (This isn't currently a problem because existing code avoids calling this function if the device is already suspended.) Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <dm-devel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] dm: fix find_device raceAlasdair G Kergon
There is a race between dev_create() and find_device(). If the mdptr has not yet been stored against a device, find_device() needs to behave as though no device was found. It already returns NULL, but there is a dm_put() missing: it must drop the reference dm_get_md() took. The bug was introduced by dm-fix-mapped-device-ref-counting.patch. It manifests itself if another dm ioctl attempts to reference a newly-created device while the device creation ioctl is still running. The consequence is that the device cannot be removed until the machine is rebooted. Certain udev configurations can lead to this happening. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: <dm-devel@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_via: fix obvious typo
2006-11-08[libata] sata_via: fix obvious typoJeff Garzik
Spotted by Martin Devera. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-07[TG3]: Fix array overrun in tg3_read_partno().Michael Chan
Use proper upper limits for the loops and check for all error conditions. The problem was noticed by Adrian Bunk. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-07[NET]: kconfig, correct traffic shaperJiri Slaby
As Patrick McHardy <kaber@trash.net> suggested, Traffic Shaper is now obsolete and alternative to it is no longer CBQ, since its problems with virtual devices, alter Kconfig text to reflect this -- put a link to the traffic schedulers as a whole. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-07[PATCH] e1000: Fix regression: garbled stats and irq allocation during swsuspAuke Kok
e1000: Fix suspend/resume powerup and irq allocation From: Auke Kok <auke-jan.h.kok@intel.com> After 7.0.33/2.6.16, e1000 suspend/resume left the user with an enabled device showing garbled statistics and undetermined irq allocation state, where `ifconfig eth0 down` would display `trying to free already freed irq`. Explicitly free and allocate irq as well as powerup the PHY during resume fixes when needed. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-07[PATCH] b44: change comment about irq mask registerJohannes Berg
Through some experimentation with the similarly built bcm43xx I came to the conclusion that if the hw/firmware sets a bit in the interrupt register, an interrupt will only be raised if that bit is included in the interrupt mask. Hence, the interrupt mask is more like an interrupt control mask. This patch changes the comment to reflect that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel V4L/DVB (4784): [saa7146_i2c] short_delay mode fixed for fast machines V4L/DVB (4770): Fix mode switch of Compro Videomate T300 V4L/DVB (4787): Budget-ci: Inversion setting fixed for Technotrend 1500 T V4L/DVB (4786): Pvrusb2: use NULL instead of 0 V4L/DVB (4785): Budget-ci: Change DEBIADDR_IR to a safer default V4L/DVB (4752): DVB: Add DVB_FE_CUSTOMISE support for MT2060
2006-11-06Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Kconfig: remove redundant NETDEVICES depends [PATCH] ehea: 64K page support fix [PATCH] ehea: Removed redundant define [PATCH] ehea: Nullpointer dereferencation fix [PATCH] bcm43xx: fix unexpected LED control values in BCM4303 sprom [PATCH] bcm43xx: Fix low-traffic netdev watchdog TX timeouts [PATCH] hostap_plx: fix CIS verification [PATCH] ieee80211: don't flood log with errors
2006-11-06[PATCH] isdn/gigaset: convert warning messageTilman Schmidt
Make the failed-to-allocate-skb warning a non-debug message. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Cc: Kai Germaschewski <kai.germaschewski@gmx.de> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-06[PATCH] Fix for LKDTM MEM_SWAPOUT crashpointAnkita Garg
The MEM_SWAPOUT crashpoint in LKDTM could be broken as some compilers inline the call to shrink_page_list() and symbol lookup for this function name fails. Replacing it with the function shrink_inactive_list(), which is the only function calling shrink_page_list(). Signed-off-by: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-06Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-11-06[PATCH] Kconfig: remove redundant NETDEVICES dependsRandy Dunlap
drivers/net/Kconfig says: # All the following symbols are dependent on NETDEVICES - do not repeat # that for each of the symbols. so remove duplicate 'depends' uses of NETDEVICES. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06[PATCH] ehea: 64K page support fixThomas Klein
This patch fixes 64k page support by using PAGE_MASK and appropriate pagesize defines in several places. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06[PATCH] ehea: Removed redundant defineThomas Klein
Removed define H_CB_ALIGNMENT which is already defined in include/asm-powerpc/hvcall.h Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-06[PATCH] ehea: Nullpointer dereferencation fixThomas Klein
Fix: Must check for nullpointer before dereferencing it - not afterwards. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-05[TG3]: Fix 2nd ifup failure on 5752M.Michael Chan
This fixes a bug reported in: http://bugzilla.kernel.org/show_bug.cgi?id=7438 tg3_close() turns off the PHY if WoL and ASF are both disabled. On the next tg3_open(), some devices such as the 5752M will not be brought up correctly without a PHY reset early in the reset sequence. The PHY clock is needed for some internal MAC blocks to function correctly. This problem is fixed by always resetting the PHY early in tg3_reset_hw() when it is called from tg3_open() or tg3_resume(). tg3_setup_phy() can then be called later in the sequence without the reset_phy parameter set to 1, since the PHY reset is already done. Update version to 3.68. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-03Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Let PCI_MULTITHREAD_PROBE depend on BROKEN PCI: Revert "PCI: i386/x86_84: disable PCI resource decode on device disable"
2006-11-03Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: use MII hooks only if CONFIG_MII is enabled USB Storage: unusual_devs.h entry for Sony Ericsson P990i USB: xpad: additional USB id's added USB: fix compiler issues with newer gcc versions USB: HID: add blacklist AIRcable USB, little beautification USB: usblp: fix system suspend for some systems USB: failure in usblp's error path usbtouchscreen: use endpoint address from endpoint descriptor USB: sierra: Fix id for Sierra Wireless MC8755 in new table USB: new VID/PID-combos for cp2101 hid-core: big-endian fix fix USB: usb-storage: Unusual_dev update USB: add another sierra wireless device id
2006-11-03[PATCH] IDE: Add the support of nvidia PATA controllers of MCP67 to amd74xx.cPeer Chen
Add support for PATA controllers of MCP67 to amd74xx.c. Signed-off-by: Peer Chen <pchen@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03[PATCH] drivers/isdn/hysdn/hysdn_sched.c: sleep after taking spinlock fixAmol Lad
spin_lock_irq{save,restore} is incorrectly called here (the function can sleep after acquring the lock). done the necessary corrections and removed unwanted cli/sti. Signed-off-by: Amol Lad <amol@verismonetworks.com> Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03[PATCH] spi section fixAndrew Morton
WARNING: vmlinux - Section mismatch: reference to .init.text:spi_register_board_info from __ksymtab_gpl between '__ksymtab_spi_register_board_info' (at offset 0xc032f7d0) and '__ksymtab_spi_alloc_master' Fix this by removing the export. Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03[PATCH] ipmi_si_intf.c sets bad class_mask with PCI_DEVICE_CLASSYvan Seth
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7439 It looks like device registration in drivers/char/ipmi/ipmi_si_intf.c was cleaned up and a small error was made when setting the class_mask. The fix is simple as the correct mask value is defined in the code but is not used. Acked-by: Corey Minyard <minyard@acm.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03[PATCH] edac_mc: fix error handlingAkinobu Mita
Call sysdev_class_unregister() on failure in edac_sysfs_memctrl_setup() and decrease identation level for clear logic. Acked-by: Doug Thompson <norsk5@xmission.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03[PATCH] lkdtm: cleanup headers and module_param/MODULE_PARM_DESCRandy Dunlap
Fix module_param/sysfs file permission typo. Clean up MODULE_PARM_DESC strings to avoid fancy (and incorrect) formatting. Fix header includes for lkdtm; add some needed ones, remove unused ones; and fix this gcc warning: drivers/misc/lkdtm.c:150: warning: 'struct buffer_head' declared inside parameter list drivers/misc/lkdtm.c:150: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03[PATCH] md: send online/offline uevents when an md array starts/stopsNeilBrown
This allows udev to do something intelligent when an array becomes available. Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03USB: use MII hooks only if CONFIG_MII is enabledDavid Brownell
Fix mcs7830 patch The recent mcs7830 update to make the MII support sharable goofed various pre-existing configurations in two ways: - it made the usbnet infrastructure reference MII symbols even when they're not needed in the kernel being built - it didn't enable MII along with the mcs7830 minidriver This patch fixes these two problems. However, there does seem to be a Kconfig reverse dependency bug in that MII gets wrongly enabled in some cases (like USBNET=y and USBNET_MII=n); I think I've noticed that same problem in other situations too. So the result can mean kernels being bloated by stuff that's needlessly enabled ... better than wrongly being disabled, but contributing to bloat. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03USB Storage: unusual_devs.h entry for Sony Ericsson P990iJan Mate
USB Storage: this patch adds support for Sony Ericsson P990i Signed-off-by: Jan Mate <mate@fiit.stuba.sk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03USB: xpad: additional USB id's addedDominic Cerquetti
Adding additional USB vendor/product ID's for XBOX pads provided by the XBOX Linux team. Signed-off-by: Dominic Cerquetti <binary1230@yahoo.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03USB: fix compiler issues with newer gcc versionsDavid Brownell
Remove complaint from newer GCCs; they don't like forward function declarations except in top-level contexts. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03USB: HID: add blacklist AIRcable USB, little beautificationNaranjo Manuel Francisco
This patch add AIRcable USBto USB-HID blacklist, makes some little changes things in the Kconfig to make AIRcable USB look as all the rest of drivers. And it removes the readme part that was on Documentation/usb/usb-serial.txt because it is not needed anymore. Signed-off-by: Naranjo Manuel Francisco <naranjo.manuel@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03USB: usblp: fix system suspend for some systemsOliver Neukum
this has been confirmed to fix suspend problems with usblp. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03USB: failure in usblp's error pathOliver Neukum
if urb submission fails due to a transient error here eg. ENOMEM , the driver is dead. This fixes it. Regards Oliver Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03usbtouchscreen: use endpoint address from endpoint descriptorDaniel Ritz
use the endpoint address from the endpoint descriptor instead of the hardcoding it to 0x81. at least some ITM based screen use a different address and don't work without this. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Ralf Lehmann <ralf@lehmann.cc> Cc: J.P. Delport <jpdelport@csir.co.za> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-03USB: sierra: Fix id for Sierra Wireless MC8755 in new tableJan Luebbe
The new version of sierra.c has introduced tables for the 1 port and 3 port variants. The device id i added in my last patch needs to be added to the 3 port table. Signed-off-by: Jan Luebbe <jluebbe@lasnet.de> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 16:47:39 +0000