aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-07-10[S390] Program check in diag 210 under 31 bitMichael Holzheu
If a virtual address is passed to the diag210 function under 31 bit, we get a programming exception, since diag 210 only works with physical addresses. To fix this, the content of the diag210 data structure is copied to a local structure and the physical address of that structure is passed to diagnose 210. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] zcore: Fix __user annotation.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] sclp: Test facility list before executing a service call.Heiko Carstens
Check if a command is available before executing. Saves some superfluous service calls that won't succeed anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] sclp: introduce some new interfaces.Heiko Carstens
Introduce some new interfaces so that random subsystems don't have to mess around with sclp internal structures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10[S390] vmcp cleanupRobert P. J. Day
No need to use the "&" prefix and, since you're calling nonseekable_open(), there is no need to use no_llseek(). Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-10pipe: change the ->pin() operation to ->confirm()Jens Axboe
The name 'pin' was badly chosen, it doesn't pin a pipe buffer in the most commonly used sense in the kernel. So change the name to 'confirm', after debating this issue with Hugh Dickins a bit. A good return from ->confirm() means that the buffer is really there, and that the contents are good. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10splice: divorce the splice structure/function definitions from the pipe headerJens Axboe
We need to move even more stuff into the header so that folks can use the splice_to_pipe() implementation instead of open-coding a lot of pipe knowledge (see relay implementation), so move to our own header file finally. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10loop: convert to using splice_direct_to_actor() instead of sendfile()Jens Axboe
This gets rid of the dependency on ->sendfile() for receiving data and converts loop to ->splice_read() instead. Also includes an IV offset fix from Hugh Dickins. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Remove legacy CDROM driversJens Axboe
They are all broken beyond repair. Given that nobody has complained about them (most haven't worked in 2.6 AT ALL), remove them from the tree. A new mitsumi driver that actually works is in progress, it'll get added when completed. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[PATCH] fix request->cmd == INT casesBoaz Harrosh
- I have unearthed very old bugs in stale drivers that still used request->cmd as a READ|WRITE int - This patch is maybe a proof that these drivers have not been used for a long time. Should they be removed completely? Drivers that currently do not work for sure: drivers/acorn/block/fd1772.c | 2 +- drivers/acorn/block/mfmhd.c | 8 ++++---- drivers/cdrom/aztcd.c | 2 +- drivers/cdrom/cm206.c | 2 +- drivers/cdrom/gscd.c | 2 +- drivers/cdrom/mcdx.c | 2 +- drivers/cdrom/optcd.c | 2 +- drivers/cdrom/sjcd.c | 2 +- Drivers with cosmetic fixes only: b/drivers/block/amiflop.c b/drivers/block/nbd.c b/drivers/ide/legacy/hd.c Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10cciss: add new controller support for P700mMike Miller (OS Dev
This patch adds support for the Smart Array P700m SAS controller. This new controller will ship Fall 2007. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[PATCH] Remove acsi.cJens Axboe
Originally from Boaz Harrosh <bharrosh@panasas.com> It hasn't been working in 2.5 or 2.6 ever, since it's still buffer_head based. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[PATCH] cdrom_sysctl_info fixDave Young
Fix the cdrom_sysctl_info possible buffer overwrite bug. Also fix the locking of accessing topCdromPtr pointer. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Input: tsdev - fix broken usec-to-millisecs conversionAndrew Morton
Noted by Fengwei Yin <yfw.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: pxa27x_keyboard - fix compile errorMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: serio_raw - shut up errorneous warningAndrew Morton
drivers/input/serio/serio_raw.c: In function 'serio_raw_read': drivers/input/serio/serio_raw.c:163: warning: 'c' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: atkbd - change mapping for e032 from KEY_WWW to KEY_HOMEPAGEHans de Goede
WWW/Homepage key on Microsoft-compatible keyboards generates KEY_WWW when connected via PS/2 port but KEY_HOMEPAGE when connected via USB. This patch changes mapping in atkbd to match one in HID driver. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: usbtouchscreen - add support for IRTOUCHSYSTEMS touchscreensOndrej Zary
This patch adds support for IRTOUCHSYSTEMS (or UNITOP) infrared touchscreens. The touchscreen sends data in 8-byte packets. BYTE 0 - unknown meaning, seen only one value: 0x54 BYTE 1 - unknown meaning, 3 lowest bits indicate touch state values seen: 0x81, 0x82 or 0x83 bit 0 = set if the screen is touched and was not touched before (touch bit 1 = set if the screen is touched and was touched (dragging) bit 2 = set if the touch was ended (release) BYTES 2 and 3 - X position, high-order-byte first, range = 0 to 0x0FFF BYTES 4 and 5 - Y position, high-order-byte first, range = 0 to 0x0FFF BYTE 6 - unknown meaning, seen only one value: 0xFF BYTE 7 - unknown meaning, seen only one value: 0x00 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - fix report for dpad and inverted Y and RY axes on xbox 360Dmitry Torokhov
Make the driver report Y/RY up as positive value and down as negative. Also make DPAD mapping the same as classic xpad. Reported-by: Brian Magnuson <bdmagnuson@gmail.com> Tested-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - make xpad_play_effect() staticAdrian Bunk
xpad_play_effect() does not need to be global. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - fix check for succesful usb_buffer_allocJan Kratochvil
Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: grip-mp - use ARRAY_SIZEAndi Drebes
Signed-off-by: Andi Drebes <lists-receive@programmierforen.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wacom - add support for the new Bamboo tabletsPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: add gpio-mouse driverHans-Christian Egtvedt
Adds support for simulating a mouse using GPIO lines. The driver needs an appropriate platform device to be created by architecture code. The driver has been tested on AT32AP7000 microprocessor using the ATSTK1000 development board. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: convert from class devices to standard devicesDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - add support for querying/changing keymapDmitry Torokhov
Implement getkeycode and setkeycode methods for the device so EVIOCGKEYCODE and EVIOCSKEYCODE ioctls will work. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - convert to use input-polldevDmitry Torokhov
Switch to using input-polldev skeleton instead of implementing polling loop by itself. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wistron - add LED supportEric Piel
Add support to wistron_btns for leds that come with the multimedia keys. Mail and wifi leds are supported, on laptops which have them. Depending on the laptop, wifi subsystem may control just the led, or both the led and the wifi card. Wifi led interface is activated only for the former type of laptops, as the latter type is already managed. Leds are controled by the interface in /sys/class/leds. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: wriston - reduce polling frequencyEric Piel
Reduces the polling frequency from 10 Hz to 2 Hz, which should be less a burden for laptops wrt energy saving. As it is multimedia keys, 500ms (maximum) of latency should be still fine for the user. In order to keep fluent the feeling when the user is pressing several keys in a raw (such as changing the volume), the frequency is increased for a short duration after a key is pressed. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - update driver versionRene van Paassen
Update credits and version number to 2.3 Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - rework the function key codeRene van Paassen
Function keys (also called macro keys) code corrected. Using a lastMacro variable to keep track of key currently pressed. This ensures proper resetting when dragging the pen in the drawing area or to another key. Also suppress sending pressure reports when over the macro key area. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - tolerate newlines in sysfs filesRene van Paassen
Now echo "some value" > /sys/......./somefile is also acceptable. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct the tool switching codeRene van Paassen
Now the old tool is remembered, and reset when a new tool is selected via the sysfs files. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use only absolute misc reportsRene van Paassen
To get an on - off reporting for proximity, absolute misc reports are used. The mixture of absolute and relative reports is awkward Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - put sensible warnings in probeRene van Paassen
Added warnings to the points where the tablet probe may fail Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use set_bit instead of bitwise orRene van Paassen
Have to use set_bit since some bit values are over 32, and bitwise or won't work on these. To be safe for the future too, use set_bit for all input dev capabilities Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - fix relative mode parsingMark Vytlacil
Corrections to relative mode, was looking at wrong byte Signed-off-by: Mark Vytlacil <mrv@wi.rr.com> Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - fixed mouse button definesRene van Paassen
Mouse button defines tested the wrong bits, now fixed Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct the proximity and validity checksRene van Paassen
Calculation of proximity bit and of data valid bits were reversed for stylus reports. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - correct documentation on reportsRene van Paassen
Small fix that corrects the documentation on the report byte format produced by the mouse Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use array to list all buttonsDmitry Torokhov
When setting up input device use an array to list all the buttons instead of setting every bit separately. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - kill aiptek_convert_from_2s_complement()Dmitry Torokhov
There is no reason to do that, just tell the compiler that we are dealing with signed values in buffer, that's it. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use maps in attributesDmitry Torokhov
Use maps to convert for strings to internal constants and vice versa in aiptek's sysfs attribute methods instead of open-coding it. This results in smaller code that is also easier to maintain. [Rene: fix a typo - stylys instead of stylus] Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - do not check for NULL in attribute methodsDmitry Torokhov
It makes no sense to check for NULL in attribute methods - we do usb_set_intfdata before creating attributes and once attributes have been removed we are guaranteed to not be called. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - use attribute groupDmitry Torokhov
Use attribute group to simplify error handling and reduce code. [Rene: add missing NULL to properly terminate aiptek_attributes] Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - remove vendor and product attributes from sysfsDmitry Torokhov
They are already exported by input core; there is no need to do it twice. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: aiptek - do not try to export associated event deviceDmitry Torokhov
Do not try to export via sysfs associated event device - it does not work when evdev is a module that is loaded after aiptek; also it pokes too deply into input core internals. Userspace should rely on udev to set up permanent device name for the tablet. Signed-off-by: Rene van Paassen <rene.vanpaassen@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: psmouse - add support for Cortron PS/2 TrackballsAristeu Rozanski
Cortron PS/2 Trackballs (700-0001A) report the 4th button using the 4th bit of the first packet (yes, it breaks the standard PS/2 protocol). This patch adds an extra protocol to generate BTN_SIDE based on the 4th bit. There's no way to detect those trackballs using any kind of special sequence, thus the protocol must be activated explicitely by writing into 'protocol' sysfs attribute: echo -n "cortps" > /sys/devices/platform/i8042/serio1/protocol Signed-off-by: Aristeu Rozanski <arozansk@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - add Xbox360 gamepad rumble supportJan Kratochvil
Implementation is using force feedback support for memoryless devices. Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-07-10Input: xpad - add support for Xbox 360 gamepadJan Kratochvil
Xbox 360 gamepad is slightly different then the previous model so it has its own version of process_packet method. Detection of this new device relies on USB_DEVICE_INTERFACE_PROTOCOL macro. This device got vendor specific subclass so it can't be matched with USB_INTERFACE_INFO and we need only one interface protocol from four availaible. It means USB_DEVICE can't be used either. Added xpad360_btn structure with additional buttons for x360 gamepad. Added xtype into xpad_device structure to distinguish between different types of xbox devices. Signed-off-by: Jan Kratochvil <honza@jikos.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 07:36:42 +0000