aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-06-28[MTD] oops and panic message logging to MTD deviceRichard Purdie
Kernel oops and panic messages are invaluable when debugging crashes. These messages often don't make it to flash based logging methods (say a syslog on jffs2) due to the overheads involved in writing to flash. This patch allows you to turn an MTD partition into a circular log buffer where kernel oops and panic messages are written to. The messages are obtained by registering a console driver and checking oops_in_progress. Erases are performed in advance to maximise the chances of a saving messages. To activate it, add console=ttyMTDx to the kernel commandline (where x is the mtd device number to use). Signed-off-by: Richard Purdie <rpurdie@openedhand.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28[MTD] [NAND] at91_nand rdy_pin fixIvan Kuten
The patch below fixes nand driver for AT91 boards which do not have NAND R/B signal connected to gpio (rdy_pin is not connected). Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28[MTD] Remove references to ROOT_DEV from map drivers.David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-28[MTD] Only call mtd->sync() method in mtdchar close if opened for write.Joakim Tjernlund
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-06-27Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: kill ATA_HORKAGE_DMA_RW_ONLY libata: use PIO for non-16 byte aligned ATAPI commands libata: call ata_check_atapi_dma() with qc better prepared libata: fix infinite EH waiting bug libata: fix ata_dev_disable() pata_it821x: fix section mismatch warning libata: remove unused variable from ata_eh_reset() libata: be less verbose about hpa libata: kill non-sense warning message libata: kill the infamous abnormal status message HPT374 is UDMA100 not UDMA133
2007-06-27Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: 2.6.22: ERROR: "__ucmpdi2" [drivers/net/s2io.ko] undefined! cxgb3 - fix register to stop bc/mc traffic au1000_eth: Fix warnings.
2007-06-27Add support SiS based XGI chips to SiS DRM.Ian Romanick
This adds support for some of the XGI Volari family that are based on the SiS. Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-27libata: kill ATA_HORKAGE_DMA_RW_ONLYTejun Heo
ATA_HORKAGE_DMA_RW_ONLY for TORiSAN is verified to be subset of using DMA for ATAPI commands which aren't aligned to 16 bytes. As libata now doesn't use DMA for unaligned ATAPI commands, the horkage is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: use PIO for non-16 byte aligned ATAPI commandsTejun Heo
The IDE driver used DMA for ATAPI commands if READ/WRITE command is multiple of sector size or sg command is multiple of 16 bytes. For libata, READ/WRITE sector alignment is guaranteed by the high level driver (sr), so we only have to worry about the 16 byte alignment. This patch makes ata_check_atapi_dma() always request PIO for all data transfer commands which are not multiple of 16 bytes. The following reports are related to this problem. http://bugzilla.kernel.org/show_bug.cgi?id=8605 (confirmed) http://thread.gmane.org/gmane.linux.kernel/476620 (confirmed) https://bugzilla.novell.com/show_bug.cgi?id=229260 (probably) Albert first pointed out the difference between IDE and libata. Kudos to him. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: call ata_check_atapi_dma() with qc better preparedTejun Heo
In atapi_xlat(), prepare qc better before calling ata_check_atapi_dma() such that ata_check_atapi_dma() can use info from qc. While at it, reformat weird looking if/else block in the function. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: fix infinite EH waiting bugTejun Heo
When EH gives up after repeated exceptions, it doesn't't clear the PENDING bit on exit which leaves PENDING bit set without EH actually scheduled. This makes ata_port_wait_eh() to wait forever makes rmmod hang on such port. Fix it by clearing the flag. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: fix ata_dev_disable()Tejun Heo
Fix silly condition check bug in ata_dev_disable(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27pata_it821x: fix section mismatch warningRandy Dunlap
Fix section mismatch when CONFIG_HOTPLUG=n (but functions are used for resume): WARNING: drivers/ata/pata_it821x.o(.text+0x3f): Section mismatch: reference to .init.text: (between 'it821x_reinit_one' and 'it821x_program_udma') WARNING: drivers/ata/pata_it821x.o(.text+0x691): Section mismatch: reference to .init.text: (between 'it821x_init_one' and 'it821x_passthru_set_dmamode') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: remove unused variable from ata_eh_reset()Tejun Heo
Removed unused variable did_followup_srst from ata_eh_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: be less verbose about hpaTejun Heo
There's no reason to print out hpa related messages when HPA is not active. Kill the unconditional message and add a warning message which is printed if HPA size is smaller than the current size. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27libata: kill non-sense warning messageTejun Heo
prereset() is now allowed to set flag for unsupported reset method. EH layer is responsible for selecting the fallback. Remove non-sense warning message. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27HPT374 is UDMA100 not UDMA133Alan Cox
Propogate change from drivers/ide Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-272.6.22: ERROR: "__ucmpdi2" [drivers/net/s2io.ko] undefined!Olaf Hering
On Tue, Jun 19, Stephen Hemminger wrote: > Olaf Hering <olaf@aepfle.de> wrote: > > What happend to __ucmpdi2 from David Woodhouse? > > google has a few hits about stuff like this on 32bit powerpc with gcc 4.1.2: > > > > ERROR: "__ucmpdi2" [drivers/net/s2io.ko] undefined! > > > > using the drivers/net/s2io* files from 2.6.21 with 2.6.22-rc5 fixes the > > compile. > > > > 25805dcf9d83098cf5492117ad2669cd14cc9b24 adds two u64 >>= 48 followed by > > a switch statement (line 2889 and 6816). > > Probably the "switch(err) {" needs a cast to a smaller type (like u8). This change removes the compiler-generated calls to __ucmpdi2. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27cxgb3 - fix register to stop bc/mc trafficDivy Le Ray
Use the right register to stop broadcast/multicast traffic. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-27au1000_eth: Fix warnings.Ralf Baechle
Fixed by including <linux/dma-mapping.h>: CC drivers/net/au1000_eth.o drivers/net/au1000_eth.c: In function 'au1000_probe': drivers/net/au1000_eth.c:661: warning: implicit declaration of function 'dma_alloc_noncoherent' drivers/net/au1000_eth.c:802: warning: implicit declaration of function 'dma_free_noncoherent' Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-25USB: ftdio_sio: New IPlus device IDLuiz Fernando N. Capitulino
Reported by Grzegorz Chimosz <gchimi@gmail.com> Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: add new device id to option driverAlexander Gattin
Cc: Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: fix race leading to use after free in io_edgeportOliver Neukum
usb_unlink_urb() is asynchronous, therefore an URB's buffer may not be freed without waiting for the completion handler. This patch switches to usb_kill_urb(), which is synchronous. Thanks to Alan for making me look at the remaining users of usb_unlink_urb() Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: usblcd doesn't limit memory consumption during writeOliver Neukum
usblcd currently has no way to limit memory consumption by fast writers. This is a security problem, as it allows users with write access to this device to drive the system into oom despite resource limits. Here's the fix taken from the modern skeleton driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: memory leak in iowarrior.cOliver Neukum
this is a classical memory leak in the ioctl handler. The buffer is simply never freed. This fixes it the obvious way. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: ti serial driver sleeps with spinlock heldOliver Neukum
you are submitting an URB with GFP_KERNEL holding a spinlock. In this case the spinlock can be dropped earlier. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: Al Borchers <alborchers@steinerpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-25USB: g_file_storage: call allow_signal()Oleg Nesterov
New changes in the signal-handling code require compensating changes in g_file_storage. This patch (as913) by Oleg Nesterov makes the code use allow_signal() instead of sigprocmask(). From: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-24Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Make skb_seq_read unmap the last fragment [NET]: Re-enable irqs before pushing pending DMA requests [TCP] tcp_read_sock: Allow recv_actor() return return negative error value. [PPP]: Fix osize too small errors when decoding mppe. [PPP]: Revert 606f585e363527da9feaed79465132c0c661fd9e [TIPC]: Fix infinite loop in netlink handler [SKBUFF]: Fix incorrect config #ifdef around skb_copy_secmark [IPV4]: include sysctl.h from inetdevice.h [IPV6] NDISC: Fix thinko to control Router Preference support. [NETFILTER]: nfctnetlink: Don't allow to change helper [NETFILTER]: nf_conntrack_sip: add missing message types containing RTP info
2007-06-24Char: stallion, fix oops during init with ISA cardsIngo Korb
The stallion driver oopses while initializing ISA cards due to an uninitialized variable. This patch changes the initialisation order to match the PCI code path. Signed-off-by: Ingo Korb <ml@akana.de> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: Check SM501 ID register on initialisationBen Dooks
When binding the driver, check the ID register for a valid identity, in case the SM501 is not functioning correctly. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: Clock updates and checksBen Dooks
Ensure that the M1XCLK and MCLK are sourced from the same PLL (and refuse to bind the driver if they are not). Update the PCI to safe initialisation values, as 72MHz is the maximum clock for 33MHz PCI bus mastering. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: Fix sm501_init_reg() mask/set orderBen Dooks
The order of the set and mask operation in sm501_init_reg() was setting and then masking the bits set. Correct the order so that we do not end up with 288MHz SDRAM clocks on certain systems. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: initialise SDRAM clock before bus clocksBen Dooks
This init sequence of setting the SDRAM clock before the bus clock is recommend by Silicon Motion to stop problems with writes not sticking into registers. Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24SM501: suspend supportBen Dooks
This patch adds support for suspending the core (mfd driver) of the SM501. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24console UTF-8 fixes (fix)Egmont Koblinger
Recently my console UTF-8 patch went mainline. Here is an additional patch that fixes two nasty issues and improves a third one, namely: 1. My patch changed the behavior if a glyph is not found in the Unicode mapping table. Previously for Unicode values less than 256 or 512 the kernel tried to display the glyph from that position of the glyph table, which could lead to a different accented letter being displayed. I removed this fallback possibility and changed it to display the replacement symbol. As Behdad pointed out, some fonts (e.g. sun12x22 from the kbd package) lack Unicode mapping information, hence all you get is lots of question marks. Though theoretically it's actually a user-space bug (the font should be fixed), Behdad and I both believe that it'd be good to work around in the kernel by re-introducing the fallback solution for ASCII characters only. This sounds a quite reasonable decision, since all fonts ship the ASCII characters in the first 128 positions. This way users won't be surprised by lots of question marks just because s/he issued a not-so-perfectly parameterized setfont command. As this fallback is only re-introduced for code points below 128, you still won't see an accented letter replaced by another, but at least you'll always get the English letters right. 2. My patch introduced "question mark with inverted color attributes" as a last resort fallback glyph. Though it perfectly works on VGA console, on framebuffer you may end up with question marks that are highlighed but shouldn't be, and normal characters that are accidentally highlighed. This is caused by missing FLUSHes when changing the color attribute. 3. I've updated the table of double-width character based on Markus's updated version. Only ten new code poings (one interval) is added. Signed-off-by: Egmont Koblinger <egmont@uhulinux.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-24hwmon/coretemp: fix a broken error pathJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-23[PPP]: Fix osize too small errors when decoding mppe.Konstantin Sharlaimov
The mppe_decompress() function required a buffer that is 1 byte too small when receiving a message of mru size. This fixes buffer allocation to prevent this from occurring. Signed-off-by: Konstantin Sharlaimov <konstantin.sharlaimov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-23[PPP]: Revert 606f585e363527da9feaed79465132c0c661fd9eDavid S. Miller
This can cause packet buffer overflows in certain cases, the real bug will be fixed differently in a followon changeset. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-23Pull now into release branchLen Brown
2007-06-23ACPI: fix 2.6.20 SMP boot regressionVenkatesh Pallipadi
Always disable/enable interrupts in the acpi idle routine, even in the error path. This is required as the 2.6.20 change in git commit d331e739f5ad2aaa9... "Fix interrupt race in idle callback" expects the idle handler to enable interrupt before returning. There was a case in acpi idle routine, in which interrupt was not being enabled before return, which caused the system to hang at bootup, while enabling C-states on an SMP system. The signature of the hang was that "processor.nocst" was required to enable boot. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-06-22x86_64: Fix only make Macintosh drivers default on MacsOlaf Hering
Include PPC_MAC in the default too, not only MAC which only covers m68k MACs. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Correct max_srq_wr returned from mlx4_ib_query_device() IPoIB/cm: Remove dead definition of struct ipoib_cm_id IPoIB/cm: Fix interoperability when MTU doesn't match IPoIB/cm: Initialize RX before moving QP to RTR IB/umem: Fix possible hang on process exit
2007-06-21Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] intel_agp: don't load if no IGD and AGP port
2007-06-21Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: [PARISC] unwinder improvements [PARISC] Fix unwinder on 64-bit kernels [PARISC] Handle wrapping in expand_upwards() [PARISC] stop lcd driver from stripping initial whitespace
2007-06-21[PARISC] stop lcd driver from stripping initial whitespaceJulian Stecklina
Signed-off-by: Julian Stecklina <der_julian@web.de> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2007-06-21IB/mlx4: Correct max_srq_wr returned from mlx4_ib_query_device()Jack Morgenstein
We need to keep a spare entry in the SRQ so that there always is a next WQE available when posting receives (so that we can tell the difference between a full queue and an empty queue). So subtract 1 from the value HW gives us before reporting the limit on SRQ entries to consumers. Found by Mellanox QA. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-21IPoIB/cm: Remove dead definition of struct ipoib_cm_idRoland Dreier
It's completely unused. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-21IPoIB/cm: Fix interoperability when MTU doesn't matchMichael S. Tsirkin
IPoIB connected mode currently rejects a connection request unless the supported MTU is >= the local netdevice MTU. This breaks interoperability with implementations that might have tweaked IPOIB_CM_MTU, and there's real no longer a reason to do so: this test is just a leftover from when we did not tweak MTU per-connection. Fix this by making the test as permissive as possible. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-21IPoIB/cm: Initialize RX before moving QP to RTRMichael S. Tsirkin
Fix a crasher bug in IPoIB CM: once a QP is in the RTR state, a receive completion (or even an asynchronous error) might be observed on this QP, so we have to initialize all of our receive data structures before moving to the RTR state. As an optimization (since modify_qp might take a long time), the jiffies update done when moving RX to the passive_ids list is also left in place to reduce the chance of the RX being misdetected as stale. This fixes bug <https://bugs.openfabrics.org/show_bug.cgi?id=662>. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-21IB/umem: Fix possible hang on process exitRoland Dreier
If ib_umem_release() is called after ib_uverbs_close() sets context->closing, then a process can get stuck in a D state, because the code boils down to if (down_write_trylock(&mm->mmap_sem)) down_write(&mm->mmap_sem); which is obviously a stupid instant deadlock. Fix the code so that we only try to take the lock once. This bug was introduced in commit f7c6a7b5 ("IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules") which fortunately never made it into a release, and was reported by Pete Wyckoff <pw@osc.edu>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 05:48:26 +0000