aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-04-22rndis_wlan: convert get range to cfg80211Jussi Kivilinna
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rndis_wlan: change quality level scaleJussi Kivilinna
Change quality level scale to match cfg80211 CFG80211_SIGNAL_TYPE_UNSPEC. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rndis_wlan: convert get/set mode to cfg80211John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> [edit: made rndis_change_virtual_intf static] Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rndis_wlan: initiate cfg80211 conversionJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: add beacon filtering supportChristian Lamparter
This patch adds beacon filtering support to p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: more SoftLED updatesChristian Lamparter
This patch hopefully finishes the SoftLED code: - It adds two more LEDs (rx and radio). (the FW claims it can support up to 16 LEDs, but I doubt that any vendor put more than 4 on a board) - update the LEDs in a _delayed_ workqueue. No one reported any more crashes. (see: "PATCH] p54: fix race condition in memory management") So we can stop burning the mm code. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54: clean up p54.h's struct p54_commonChristian Lamparter
This patch rearrange and regroups most elements in p54_common. Signed-off-by: Christian Lamparter <chunkeey@web.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: reduce exported channel listBob Copeland
Claiming every available 5 ghz channel has a couple of negative side-effects: scanning takes a long time, and the channel list overflows the available buffer space for netlink commands, resulting in: $ iw phy phy0 info command failed: No buffer space available (-105) This patch adds a modparam so people who want to see all the channels can do so by passing all_channels=1. By default users will see a smaller list of channels. This also halves scan time, from 10 seconds down to less than 5 when using world regulatory. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Reported-by: Simon Farnsworth <simon@farnz.org.uk> Tested-By: Simon Farnsworth <simon@farnz.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Fix bug in determining HT40 modeSujith
This patch fixes a bug in checking for HT40 mode. The STA's mode can be determined from the cached HT capabilities, use that and remove the redundant variable 'rc_phy_mode'. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Determine number of streams from HT capabilitiesSujith
The number of streams supported by a STA can be determined directly from the HT capabilities. Remove the redundant variable storing the stream cap. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Clean Interrupt handling routineSujith
This patch cleans up the ISR, removing a unnecessary do..while loop, and waking up the chip before getting the pending interrupts. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Trivial fix to handle AMPDU params properlySujith
Handle aggregation params only when aggregation is supported. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Initialize values when setting up the queue parametersSujith
Also fix a small typo. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove the useless do..while loopsSujith
These are unnecessary constructs in a function. This patch removes these from both RX and TX init routines. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove TIM from the interrupt maskSujith
We never handle TIM, TIM_TIMER is used instead. Remove this and the unnecessary swBeaconProcess variable. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Check for root debugfs fileSujith
Creation of the root debugfs file could have failed for some reason, check properly before proceeding in this case. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove unused structuresSujith
struct aggr_rifs_param and ath_tx_stat are not used anywhere. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove a couple of unused variables in descriptor handlingSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Cleanup buffer status handlingSujith
Using a u32 to store a single flag is overkill. Use a bool to store whether the buffer is stale or not. Also, use u8 instead of u32 to store the buffer type. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Avoid unneeded castsSujith
Change the void pointer to struct sk_buff and access bf_mpdu directly, removing all casts in the process. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove redundant variable for Interrupt MitigationSujith
The state is already stored in ath9k_ops_config, so remove the duplicate variable in ath_hw. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Change return value of ath9k_hw_fill_cap_infoSujith
This routine always return true, checking for false in the return value is invalid. Fix this. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Cleanup debug messagesSujith
Clean debug messages to use appropriate levels, remove useless messages, and trim the number of debug levels. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove redundant chainmask checkSujith
We get the valid chainmasks on HW attach, checking it again during reset is redundant. This patch removes the check. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Remove a few unused flagsSujith
This patch removes unused HW capability flags and HW operation variables, and a chainmask flag that we don't use anywhere. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: No need to abort Rx path when autosleep is enabled.Vivek Natarajan
For chipsets supporting autosleep feature, there is no need to abort Rx engine since they are capable of automatically going back to sleep after receiving a packet. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43: Do not "select" HW_RANDOMMichael Buesch
Auto-depend on HW_RANDOM, rather than "select"ing it. This way the user has the choice to enable or disable HWRNG support. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rt2x00: Fix Sparse warningIvo van Doorn
rt2x00link_reset_qual() is not declared in a header, and is only internally used within rt2x00link.c. It should be declared as static. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rt2x00: Move Move pci_dev specific access to rt2x00pciIvo van Doorn
pci_dev->irq and pci_name(pci_dev) access should be limited to rt2x00pci only. This is more generic and allows a rt2x00 pci driver to be controlled as PCI device but also as platform driver (needed for rt2800pci SoC support). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ar9170: fix hang on stopChristian Lamparter
This patch fixes a locking problem which freezes the network core. The deadlock goes as follows: - ar9170_op_stop - is called 1. change the state to IDLE 2. > take the MUTEX < 3. cancel_SYNC all pending work, which means "block until a work_struct's callback has terminated" => if filter_config_work was queued it tries to get the MUTEX, before checking the device state... Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: fix scanning in AR2424Pavel Roskin
AR5K_PHY_PLL_40MHZ_5413 should not be ORed with AR5K_PHY_MODE_RAD_RF5112 for 5 GHz channels. The incorrect PLL value breaks scanning in the countries where 5 GHz channels are allowed. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rfkill: remove user_claim stuffJohannes Berg
Almost all drivers do not support user_claim, so remove it completely and always report -EOPNOTSUPP to userspace. Since userspace cannot really drive rfkill _anyway_ (due to the odd restrictions imposed by the documentation) having this code is just pointless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rfkill: remove deprecated state constantsJohannes Berg
I only did superficial review, but these constants are stupid to have and without proper warnings nobody will review the code anyway, no amount of shouting will help. Also fix wimax to use correct states. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: compensate firmware alignment bug in p54spi_rxMax Filippov
Firmware may insert up to 4 padding bytes after the lmac header, but it does not amend the size of SPI data transfer. Such packets has correct data size in header, thus referencing past the end of allocated skb. Put extra 4 bytes to the end of the received skb to compensate for this case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_conf_txAbhijeet Kolekar
3945 now uses iwl_mac_conf_tx. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: merge and better support of suspend/resume for iwlagn and iwl3945Wey-Yi Guy
With mac80211's help to call stop() and start() in mac80211 suspend/resume function, both iwlagn and iwl3945 no longer calling stop() and start(); remove un-necessary STATUS_IN_SUSPEND bit from both header files and functions, Move apm_ops.stop() function into pci_suspend() to ensure DMA is stopped before go into suspend mode. iwl3945 has the similar suspend/resume function as iwlagn, so move both functions to iwlcore to be shared by both drivers. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: fix p54spi_tx_frame DMA transfer initiation and skb cleanupMax Filippov
p54spi_tx_frame wasn't waiting for HOST_ALLOWED in SPI_ADRS_DMA_WRITE_CTRL. This resulted in frequent 'WR_READY timeout' on beacon resubmission. Also don't free skb on error path, as it gets freed on p54spi_wq_tx. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22libertas: support mesh for various firmware versionsBing Zhao
CMD_MESH_CONFIG command ID and a couple of structure members in TxPD, RxPD have been changed in firmware version 10.x.y.z and newer. Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: fix p54spi_upload_firmwareMax Filippov
Instead of firmware itself p54_upload_firmware was sending to the device content of struct firmware and the following random garbage. Notice '&' before priv->firmware->data at p54spi_spi_write. But simple removing of '&' sign triggered BUG_ON at dma_cache_maint. Thus kmemdup - kfree workaround. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bitMax Filippov
Mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bit. Without this, 'fw_upload not allowed to DMA write' is observed at both N800 and N810. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22e1000/e1000e/igb/ixgb: do not use netif_wake_queue un-necessarilyJesse Brandeburg
It was pointed out that the Intel wired ethernet drivers do not need to wake the tx queue since netif_carrier_on/off will take care of the qdisc management in order to guarantee the correct handling of the transmit routine enable state. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21sa1100_ir: fix build breakageAlexander Beregalov
Fix simple typo. Caused by commit a1de966682551debbe690672e760487cc555c05f ("irda/sa1100_ir: convert to net_device_ops"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tun: fix tun_chr_aio_write so that aio worksMichael S. Tsirkin
aio_write gets const struct iovec * but tun_chr_aio_write casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to send packets to a tun device fail with weird errors such as EINVAL. Since tun is the only user of skb_copy_datagram_from_iovec, we can fix this simply by changing the later so that it does not touch the iovec passed to it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tun: fix tun_chr_aio_read so that aio worksMichael S. Tsirkin
aio_read gets const struct iovec * but tun_chr_aio_read casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to get packets from a tun device fail with weird errors such as EINVAL. Fix by using the new skb_copy_datagram_const_iovec. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21ucc_geth: Move freeing of TX packets to NAPI contextJoakim Tjernlund
This will make the system alot more responsive while ping flooding the ucc_geth ethernet interface. Also set NAPI weight to 64 as this is a common value. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21rtl8139: unify the struct's nameJianjun Kong
unify the struct's name of "struct rtl8139_private *np" to "struct rtl8139_private *tp" most of them like this: struct rtl8139_private *tp = netdev_priv(dev); Signed-off-by: Amos Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21net: factor out ethtool invocation of vlan/macvlan driversPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21usb driver for intellon int51x1 based PLC like devolo dlan duoPeter Holik
usb driver for intellon int51x1 based PLC like devolo dlan duo with improvements suggested by the guys of the mailinglist: - name and prefix with int51x1 (Florian Fainelli) - use conversion functions cpu_to_le16 / le16_to_cpu (Oliver Neukum) - use pskb_may_pull instead of skb->len (Ilpo Järvinen) - better code in tx_fixup (Ilpo Järvinen) - use gotos for error handling (Ilpo Järvinen) - better description (Jon Smirl) Signed-off-by: Peter Holik <peter@holik.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether.cPeter Holik
because of using the same function get_ethernet_addr as cdc_ether.c i export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether (suggested by Oliver Neukum). Signed-off-by: Peter Holik <peter@holik.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Update version to 3.99Matt Carlson
This patch updates the tg3 version to 3.99. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 03:37:56 +0000