aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-02-22b44: use netdev_alloc_skb instead of dev_alloc_skbHauke Mehrtens
The conversion in bf0dcbd929faf036f1a4f2918090344d0e249cf5 missed the new allocation in b44_rx. This patch was used in OpenWRT for a long time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22b44: Set PHY address to NO_PHY if reset fails.Hauke Mehrtens
Do a PHY reset to test if there is an active phy and set the PHY address to B44_PHY_ADDR_NO_PHY in case of an not active phy. This is needed for the Linksys WRTSL54GS and Asus WL-500W. This patch was used in OpenWRT for a long time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22pci: add support for 82576NS serdes to existing SR-IOV quirkAlexander Duyck
This patch adds support for the 82576NS Serdes adapter to the existing pci quirk for 82576 parts. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22ixgbe: prevent speculative processing of descriptors before readyMilton Miller
The PowerPC architecture does not require loads to independent bytes to be ordered without adding an explicit barrier. In ixgbe_clean_rx_irq we load the status bit then load the packet data. With packet split disabled if these loads go out of order we get a stale packet, but we will notice the bad sequence numbers and drop it. The problem occurs with packet split enabled where the TCP/IP header and data are in different descriptors. If the reads go out of order we may have data that doesn't match the TCP/IP header. Since we use hardware checksumming this bad data is never verified and it makes it all the way to the application. This bug was found during stress testing and adding this barrier has been shown to fix it. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-20eepro: fix netdev_mc_count conversionAlexander Beregalov
Fix commit 4cd24eaf0 (net: use netdev_mc_count and netdev_mc_empty when appropriate) Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19be2net: Bump the driver version numberAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19be2net: Maintain tx and rx counters in driverAjit Khaparde
For certain skews of the BE adapter, H/W Tx and Rx counters could be common for more than one interface. Add Tx and Rx counters in the adapter structure (to maintain stats on a per interfae basis). Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19be2net: update copyright datesAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19r8169: enable 64-bit DMA by default for PCI Express devices (v2)Robert Hancock
Currently use of 64-bit DMA is disabled in r8169 unless the user passes the use_dac module option. This is reasonable for conventional PCI devices where broken chipsets may not handle dual-address-cycle transfers properly for 32-bit slots and so this may not be safe. However, PCI Express should not have this problem and not using 64-bit DMA results in DMA transfers needlessly using the IOMMU or SWIOTLB. Set the use_dac module parameter to a new default value of -1 which results in 64-bit DMA being enabled by default for PCI Express devices only. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19mlx4: replace the dma_sync_single_range_for_cpu/device APIFUJITA Tomonori
There are only two users of the dma_sync_single_range_for_cpu/device API in mainline (mlx4 and ssb). The dma_sync_single_range_for_cpu/device API has never been documented and the dma_sync_single_for_cpu/device API also support a partial sync. This converts mlx4 to use the dma_sync_single_for_cpu/device API (preparations for the removal of the dma_sync_single_range_for_cpu/device API). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19greth: some driver cleanupskirjanov@gmail.com
On Fri, Feb 19, 2010 at 13:51 +0100, Jiri Pirko wrote: > > <snip> > >>@@ -1031,7 +1029,7 @@ static void greth_set_multicast_list(struct net_device *dev) > >> return; > >> } > >> > >>- if (dev->mc_count == 0) { > >>+ if (!netdev_mc_count(dev)) { > also please use netdev_mc_empty() here. Some driver cleanups: * convert to use phy_find_first/phy_direct_connect * convert to use netdev_mc_* helpers * fixed missing validate_addr hook * removed netdev_priv castings Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19net/pcmcia: convert to use netdev_for_each_mc_addrJiri Pirko
removed fill_multicast_tbl function in smc91c92_cs and do the work inline rewritten set_addresses function in xirc2ps_cs. This was kinda headache. Simulated the original and new functions and they bahave the same. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: Make GRETH driver depend on SPARC.David S. Miller
Reported by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18drivers/net/sis190.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> and netif_msg_<test> Remove local #define net_<test> macros Remove periods from formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18drivers/net/tg3.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Remove periods from most formats Coalesce long formats Use printk_once Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: free tx buffers when completions never arriveSathya Perla
be2net: free tx buffers when completions never arrive In cases like when a pci device is disconnected on an error, pending tx completions will never arrive. Unmap and free such buffers in the tx cleanup path. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18tokenring: convert to use netdev_for_each_mc_addrJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18staging: convert to use netdev_for_each_mc_addrJiri Pirko
removed needless checks in arlan-main.c and slicoss.c fixed bug in et131x_netdev.c to actually fill addresses in. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net/usb: convert to use netdev_for_each_mc_addrJiri Pirko
also removed needless checks in smsc95xx Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18tulip: convert to use netdev_for_each_mc_addrJiri Pirko
also bug in de2104x.c was corrected: for (i = 0; i < 32; i++) loop should be outside mc_list iteration. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net: convert multiple drivers to use netdev_for_each_mc_addr, part2Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18smsc911x: convert to use netdev_for_each_mc_addrJiri Pirko
also removed unnecessary checks Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-183c5xx: use netdev_mc_* helpersJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18depca: remove forgotten needless inicializationJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18ipv6: drop unused "dev" arg of icmpv6_send()Alexey Dobriyan
Dunno, what was the idea, it wasn't used for a long time. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18macvtap: add GSO/csum offload supportArnd Bergmann
Added flags field to macvtap_queue to enable/disable processing of virtio_net_hdr via IFF_VNET_HDR. This flag is checked to prepend virtio_net_hdr in the receive path and process/skip virtio_net_hdr in the send path. Original patch by Sridhar, further changes by Arnd. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18net/macvtap: add vhost supportArnd Bergmann
This adds support for passing a macvtap file descriptor into vhost-net, much like we already do for tun/tap. Most of the new code is taken from the respective patch in the tun driver and may get consolidated in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18macvtap: rework object lifetime rulesArnd Bergmann
This reworks the change done by the previous patch in a more complete way. The original macvtap code has a number of problems resulting from the use of RCU for protecting the access to struct macvtap_queue from open files. This includes - need for GFP_ATOMIC allocations for skbs - potential deadlocks when copy_*_user sleeps - inability to work with vhost-net Changing the lifetime of macvtap_queue to always depend on the open file solves all these. The RCU reference simply moves one step down to the reference on the macvlan_dev, which we only need for nonblocking operations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/tehuti.c: Reapply use DEFINE_PCI_DEVICE_TABLE()Joe Perches
Commit 865a21a5e3d1b384c559a44c898fcad93e187b82 overwrote commit a3aa18842a5303fc28fcc4d57dbd16618bd830a0 Fix it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/yellowfin.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Convert formats like %8.8 to %08 Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/sky2.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/skge.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Checkpatch cleaning Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/skge.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/pci-skeleton.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Checkpatch cleaning Convert formats like 0x%08x to %#08x Remove periods from formats Coalesce long formats Use print_hex_dump Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/cnic.c: Use (pr|netdev)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Remove periods from formats Coalesce long formats Use __func__ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/cassini.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/bnx2x: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Convert struct bnx2x member msglevel to msg_enable for netif_msg_<foo> macros Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/bnx2.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Coalesce some printks Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/b44.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/8139too.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Convert formats like %8.8 to %08 Remove periods from formats Coalesce long formats Use print_hex_dump Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/8139cp.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Update version to 3.108Matt Carlson
This patch updates the tg3 version to 3.108. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Push phylib definitions to phylibMatt Carlson
This patch pushes phylib definitions out to phylib headers. For phy IDs, this removes some code duplication. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Rename tg3 phy ID preprocessor definitionsMatt Carlson
The phylib presents the phy ID in a different format than the one tg3 has traditionally used. To highlight the distinction, this patch prepends the tg3 native phy ID format with TG3. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Reformat SSID to phy ID tableMatt Carlson
This patch reformats the SSID to phy ID table, replacing constants with preprocessor definitions. This patch is also prep work for the following patch, which will push line lengths beyond 80 chars. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Discover phy address onceMatt Carlson
The phy address will not change after it has been identified. Move the discovery code to a location that only gets executed once. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Reduce indent level of tg3_rx_prodring_allocMatt Carlson
This patch adds an inverted "jumbo ring enable" test and jumps to the exit if it succeeds. The change reduces the indent level of the remaining code making it more readable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Rename TG3_FLG3_RGMII_STD_IBND_DISABLEMatt Carlson
The STD part of this preprocessor definition is a bit of a misnomer. This flag is a coarse control of the RGMII inband status facilities. This patch renames the definition to be more accurate. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Add more partno entries for fallback pathMatt Carlson
This patch adds 57765 asic partno entries for the path executed if VPD is not present in NVRAM. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17tg3: Allow phylib flowctrl changes anytimeMatt Carlson
This patch loosens the restriction that the phylib interface must be up and running to change the flow control parameters. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-18 10:50:57 +0000