aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-10-18[PATCH] libata CHS: reread device identify info (revise #6)Albert Lee
problem: id[53-58] might be changed after initializing device CHS settings. changes: - call ata_dev_reread_id() to reread the identify device info, after initializing device CHS settings. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============ Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18[PATCH] libata CHS: calculate read/write commands and protocol on the fly ↵Albert Lee
(revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18[PATCH] libata CHS: move the initialization of taskfile LBA flags (revise #6)Albert Lee
move the initialization of taskfile LBA flags "ATA_TFLAG_LBA" and "ATA_TFLAG_LBA48 flags" to the SCSI translation functions Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============= Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18Merge branch 'master'Jeff Garzik
2005-10-17[PATCH] uniput - fix crash on SMPDmitry Torokhov
Only signal completion after marking request slot as free, otherwise other processor can free request structure before we finish using it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] Fix /proc/acpi/events around suspendPavel Machek
Fix -EIO on /proc/acpi/events after suspends. This actually breaks suspending by power button in many setups. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] n_r3964 mod_timer() fixStephan Brodkorb
Since Revision 1.10 was released the n_r3964 module wasn't able to receive any data. The reason for that behavior is because there were some wrong calls of mod_timer(...) in the function receive_char (...). This patch should fix this problem and was successfully tested with talking to some kuka industrial robots. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] Fix and clean up quirk_intel_ide_combined() configurationJeff Garzik
This change makes quirk_intel_ide_combined() dependent on the precise conditions under which it is needed: * IDE is built in * IDE SATA option is not set * ata_piix or ahci drivers are enabled This fixes an issue where some modular configurations would not cause the quirk to be enabled. Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus torvalds <torvalds@osdl.org>
2005-10-17[PATCH] USB: fix bug in handling of highspeed usb HID devicesChristian Krause
During the development of an USB device I found a bug in the handling of Highspeed HID devices in the kernel. What happened? Highspeed HID devices are correctly recognized and enumerated by the kernel. But even if usbhid kernel module is loaded, no HID reports are received by the kernel. The output of the hardware USB analyzer told me that the host doesn't even poll for interrupt IN transfers (even the "interrupt in" USB transfer are polled by the host). After some debugging in hid-core.c I've found the reason. In case of a highspeed device, the endpoint interval is re-calculated in driver/usb/input/hid-core.c: line 1669: /* handle potential highspeed HID correctly */ interval = endpoint->bInterval; if (dev->speed == USB_SPEED_HIGH) interval = 1 << (interval - 1); Basically this calculation is correct (refer to USB 2.0 spec, 9.6.6). This new calculated value of "interval" is used as input for usb_fill_int_urb: line 1685: usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, 0, hid_irq_in, hid, interval); Unfortunately the same calculation as above is done a second time in usb_fill_int_urb in the file include/linux/usb.h: line 933: if (dev->speed == USB_SPEED_HIGH) urb->interval = 1 << (interval - 1); else urb->interval = interval; This means, that if the endpoint descriptor (of a high speed device) specifies e.g. bInterval = 7, the urb->interval gets the value: hid-core.c: interval = 1 << (7-1) = 0x40 = 64 urb->interval = 1 << (interval -1) = 1 << (63) = integer overflow Because of this the value of urb->interval is sometimes negative and is rejected in core/urb.c: line 353: /* too small? */ if (urb->interval <= 0) return -EINVAL; The conclusion is, that the recalculaton of the interval (which is necessary for highspeed) should not be made twice, because this is simply wrong. ;-) Re-calculation in usb_fill_int_urb makes more sense, because it is the most general approach. So it would make sense to remove it from hid-core.c. Because in hid-core.c the interval variable is only used for calling usb_fill_int_urb, it is no problem to remove the highspeed re-calculation in this file. Signed-off-by: Christian Krause <chkr@plauener.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] isp116x-hcd: fix handling of short transfersOlav Kongas
Increased use of scatter-gather by usb-storage driver after 2.6.13 has exposed a buggy codepath in isp116x-hcd, which was probably never visited before: bug happened only for those urbs, for which URB_SHORT_NOT_OK was set AND short transfer occurred. The fix attached was tested in 2 ways: (a) it fixed failing initialization of a flash drive with an embedded hub; (b) the fix was tested with 'usbtest' against a modified g_zero driver (on top of net2280), which generated short bulk IN transfers of various lengths including multiples and non-multiples of max_packet_length. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] fix black/white-only svideo input in vpx3220 decoderRonald S. Bultje
Fix the fact that the svideo input will only give input in black/white in some circumstances. Reason is that in the PCI controller driver (zr36067), after setting input, we reset norm, which overwrites the input register with the default. This patch makes it always set the correct value for the input when changing norm. Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] fix vpx3220 offset issue in SECAMRonald S. Bultje
Fix bug #5404 in kernel bugzilla. It basically updates the vpx3220 initialization tables with some newer values that we've had in CVS for a while (and that, for some reason, never ended up in the kernel... must've gotten lost). Those fix a ~16 pixels noise at the top of the picture in at least SECAM, although (now that I think about it) PAL was probably affected, also. Signed-off-by: Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-17[PATCH] SVGATextMode fixSamuel Thibault
Fix bug 5441. I didn't know about messy programs like svgatextmode... Couldn't this be integrated in some linux/drivers/video/console/svgacon.c ?... So because of the existence of the svgatextmode program, the kernel is not supposed to touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ? Disabling the check in vgacon_resize() might help indeed, but I'm really not sure whether it will work for any chipset: in my patch, CRT registers are set at each console switch, since stty rows/cols apply to consoles separately... The attached solution is to keep the test, but if it fails, we assume that the caller knows what it does (i.e. it is svgatextmode) and then disable any further call to vgacon_doresize. Svgatextmode is usually used to _expand_ the display, not to shrink it. And it is harmless in the case of a too big stty rows/cols: the display will just be cropped. I tested it on my laptop, and it works fine with svgatextmode. A better solution would be that svgatextmode explicitely tells the kernel not to care about video timing, but for this an interface needs be defined and svgatextmode be patched. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] usbserial: Regression in USB generic serial driverRandall Nortman
Kernel version 2.6.13 introduced a regression in the generic USB serial converter driver (usbserial.o, drivers/usb/serial/generic.c). The bug manifests, as far as I can tell, whenever you attempt to write to the device -- the write will never complete (write() returns 0, or blocks). Signed-off-by: Randall Nortman <oss@wonderclown.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-10-14Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-10-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-10-14[PATCH] sh-sci.c sci_start_tx errorYoshinori Sato
Argument does not agree. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] Dallas's 1-wire bus compile errorEvgeniy Polyakov
drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `netlink_kernel_create' drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `sock_release' Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] aacraid: host_lock not released fixMark Haverkamp
While doing some testing of error cases I ran into this bug. In some cases the reset handler can exit with the host_lock still held. Signed-off-by: Mark Haverkamp <markh@osdl.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] wireless/airo: Build fixMatteo Croce
The aironet PCI driver has a build dependency on ISA that prevent the driver to compile on systems that doesn't support ISA, like x86_64. The driver really doesn't depend on ISA, it does some ISA stuff in the initialization code, since the driver supports both ISA and PCI cards. So the driver should depend on ISA_DMA_API to build on all systems, and this will not hurt PCI at all. Signed-off-by: Matteo Croce <3297627799@wind.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] radio-cadet: check request_region() return value correctlyAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] zaurus: fix dependencies on collie keyboardPavel Machek
This fixes depenencies of collie keyboard. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] zaurus: fix soc_common.cPavel Machek
This fixes wrong comments, non-working debug subsystem, and some potentially dangerous macros. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[PATCH] zaurus: fix compilation with cpufreq disabledPavel Machek
This fixes compilation with CPU_FREQ disabled. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-14[QLOGICPTI]: Handle INQUIRY response sniffing correctly.David S. Miller
These days, in 2.6.x, even INQUIRY commands are sent using scatter gather lists. Bug reported by Tom 'spot' Callaway. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-14[ARM] 3014/1: Spitz keyboard: Correct the right shift keyRichard Purdie
Patch from Richard Purdie Correct the right shift key entry in the spitz keyboard driver. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[SERIAL] Add SupraExpress 336i Sp ASVD modem IDBaris Cicek
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13Merge branch 'master'Jeff Garzik
2005-10-13Merge branch 'release' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-10-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-10-12Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-10-12Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-10-12[ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.cLothar Wassmann
Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2971/1: i.MX uart handle rts irqSascha Hauer
Patch from Sascha Hauer handle rts interrupt Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2976/1: S3C2410: add static to functions in serial driverBen Dooks
Patch from Ben Dooks The s3c2410 serial driver is missing static declerations on several functions that are not exported, and have no need of being exported outside the driver Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-10-11Pull mbcs-init-sn-check into release branchTony Luck
2005-10-11[PATCH] V4L: Enable s-video input on DViCO FusionHDTV5 LiteMichael Krufky
* bttv-cards.c: - Enable S-Video input on DViCO FusionHDTV5 Lite Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11[PATCH] dell_rbu: changes in packet update mechanismAbhay Salunke
In the current dell_rbu code ver 2.0 the packet update mechanism makes the user app dump every individual packet in to the driver. This adds in efficiency as every packet update makes the /sys/class/firmware/dell_rbu/loading and data files to disappear and reappear again. Thus the user app needs to wait for the files to reappear to dump another packet. This slows down the packet update tremendously in case of large number of packets. I am submitting a new patch for dell_rbu which will change the way we do packet updates; In the new method the user app will create a new single file which has already packetized the rbu image and all the packets are now staged in this file. This driver also creates a new entry in /sys/devices/platform/dell_rbu/packet_size ; the user needs to echo the packet size here before downloading the packet file. The user should do the following: create one single file which has all the packets stacked together. echo the packet size in to /sys/devices/platform/dell_rbu/packet_size. echo 1 > /sys/class/firmware/dell_rbu/loading cat the packetfile > /sys/class/firmware/dell_rbu/data echo 0 > /sys/class/firmware/dell_rbu/loading The driver takes the file which came through /sys/class/firmware/dell_rbu/data and takes chunks of paket_size data from it and place in contiguous memory. This makes packet update process very efficient and fast. As all the packet update happens in one single operation. The user can still read back the downloaded file from /sys/devices/platform/dell_rbu/data. Signed-off-by: Abhay Salunke <abhay_salunke@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11[PATCH] s390: ccw device reconnect oops.Cornelia Huck
Search for a disconnect ccw_device on the ccw bus rather than on the css bus (was a typo in patch I did for the klist conversion). A cast to an embedding ccw_device from an embedded device in a struct subchannel will lead us to oopses. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11sata_nv: Fixed bug introduced by 0.08's MCP51 and MCP55 support.Jeff Garzik
2005-10-11Merge branch 'master'Jeff Garzik
2005-10-11[libata pdc_adma] license update, minor cleanupJeff Garzik
from me: change from OSL+GPL to GPL (with approval) from Mark: Gets rid of an unneeded control bit, slightly increasing throughput.
2005-10-11e100: revert CPU cycle saver microcode, it causes severe problemsJeff Garzik
for certain NICs Reverting 685fac63f5ca6c5ca06bab641e1a32bbf9287e89: > [PATCH] e100: CPU cycle saver microcode > > > Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices. > > Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> > Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> > Signed-off-by: John Ronciak <john.ronciak@intel.com> > Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-10[SPARC64]: Fix oops on runlevel change with serial console.David S. Miller
Incorrect uart_write_wakeup() calls cause reference to a NULL tty pointer in sunsab and sunzilog serial drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-10Use the new "kill_proc_info_as_uid()" for USB disconnect tooLinus Torvalds
All the same issues - we can't just save the pointer to the thread, we must save the pid/uid/euid combination. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10[PATCH] Fix signal sending in usbdevio on async URB completionHarald Welte
If a process issues an URB from userspace and (starts to) terminate before the URB comes back, we run into the issue described above. This is because the urb saves a pointer to "current" when it is posted to the device, but there's no guarantee that this pointer is still valid afterwards. In fact, there are three separate issues: 1) the pointer to "current" can become invalid, since the task could be completely gone when the URB completion comes back from the device. 2) Even if the saved task pointer is still pointing to a valid task_struct, task_struct->sighand could have gone meanwhile. 3) Even if the process is perfectly fine, permissions may have changed, and we can no longer send it a signal. So what we do instead, is to save the PID and uid's of the process, and introduce a new kill_proc_info_as_uid() function. Signed-off-by: Harald Welte <laforge@gnumonks.org> [ Fixed up types and added symbol exports ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-10libata: add new driver pdc_adma for PDC ADMA ATA cardsMark Lord
2005-10-10Merge master.kernel.org:/home/rmk/linux-2.6-ucbLinus Torvalds
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-06 10:00:20 +0000