aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-06Merge commit 'v2.6.26-rc9' into cpus4096Ingo Molnar
2008-07-05Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 ACPI: fix resume from suspend to RAM on uniprocessor x86-64 x86 ACPI: normalize segment descriptor register on resume
2008-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: ide_unregister() locking bugfix ide: ide_unregister() warm-plug bugfix ide: fix hwif->gendev refcounting
2008-07-05ahci: give another shot at clearing all bits in irq_statTejun Heo
Commit ea0c62f7cf70f13a67830471b613337bd0c9a62e tried to clear all bits in irq_stat but it didn't actually achieve that as irq_stat was anded with port_map right after read. This patch makes ahci driver always use the unmasked value to clear irq_status. While at it, add explanation on the peculiarities of ahci IRQ clearing. This was spotted by Linus Torvalds. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-05ide: ide_unregister() locking bugfixBartlomiej Zolnierkiewicz
Holding ide_lock for ide_release_dma_engine() call is unnecessary and triggers WARN_ON(irqs_disabled()) in dma_free_coherent(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-05ide: ide_unregister() warm-plug bugfixBartlomiej Zolnierkiewicz
Fix ide_unregister() to work for ports with no devices attached to them. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-05ide: fix hwif->gendev refcountingBartlomiej Zolnierkiewicz
class->dev_release is called by device_release() iff dev->release is not present so ide_port_class_release() is never called and the last hwif->gendev reference is not dropped. Fix it by removing ide_port_class_release() and get_device() call from ide_register_port() (device_create_drvdata() takes a hwif->gendev reference anyway). This patch fixes hang on wait_for_completion(&hwif->gendev_rel_comp) in ide_unregister() reported by Pavel Machek. Cc: Pavel Machek <pavel@suse.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-05x86 ACPI: normalize segment descriptor register on resumeH. Peter Anvin
Some Dell laptops enter resume with apparent garbage in the segment descriptor registers (almost certainly the result of a botched transition from protected to real mode.) The only way to clean that up is to enter protected mode ourselves and clean out the descriptor registers. This fixes resume on Dell XPS M1210 and Dell D620. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10927 Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: pm list <linux-pm@lists.linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-04mmc: don't use DMA on newer ENE controllersPierre Ossman
Even the newer ENE controllers have bugs in their DMA engine that make it too dangerous to use. Disable it until someone has figured out under which conditions it corrupts data. This has caused problems at least once, and can be found as bug report 10925 in the kernel bugzilla. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04mm: switch node meminfo Active & Inactive pages to KbytesJohn Blackwood
There is a bug in the output of /sys/devices/system/node/node[n]/meminfo where the Active and Inactive values are in pages instead of Kbytes. Looks like this occurred back in 2.6.20 when the code was changed over to use node_page_state(). Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04olpc: sdhci: add quirk for the Marvell CaFe's interrupt timeoutAndres Salomon
The CaFe chip has a hardware bug that ends up with us getting a timeout value that's too small, causing the following sorts of problems: [ 60.525138] mmcblk0: error -110 transferring data [ 60.531477] end_request: I/O error, dev mmcblk0, sector 1484353 [ 60.533371] Buffer I/O error on device mmcblk0p2, logical block 181632 [ 60.533371] lost page write due to I/O error on mmcblk0p2 Presumably this is an off-by-one error in the hardware. Incrementing the timeout count value that we stuff into the TIMEOUT_CONTROL register gets us a value that works. This bug was originally discovered by Pierre Ossman, I believe. [thanks to Robert Millan for proving that this was still a problem] Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Pierre Ossman <drzeus-list@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04olpc: sdhci: add quirk for the Marvell CaFe's vdd/powerup issueAndres Salomon
This has been sitting around unloved for way too long.. The Marvell CaFe chip's SD implementation chokes during card insertion if one attempts to set the voltage and power up in the same SDHCI_POWER_CONTROL register write. This adds a quirk that does that particular dance in two steps. It also adds an entry to pci_ids.h for the CaFe chip's SD device. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: Pierre Ossman <drzeus-list@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04cciss: read config to obtain max outstanding commands per controllerMike Miller
This patch changes the way we determine the maximum number of outstanding commands for each controller. Most Smart Array controllers can support up to 1024 commands, the notable exceptions are the E200 and E200i. The next generation of controllers which were just added support a mode of operation called Zero Memory Raid (ZMR). In this mode they only support 64 outstanding commands. In Full Function Raid (FFR) mode they support 1024. We have been setting the queue depth by arbitrarily assigning some value for each controller. We needed a better way to set the queue depth to avoid lots of annoying "fifo full" messages. So we made the driver a little smarter. We now read the config table and subtract 4 from the returned value. The -4 is to allow some room for ioctl calls which are not tracked the same way as io commands are tracked. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04spi: fix the read path in spidevSebastian Siewior
This got broken by the recent "fix rmmod $spi_driver while spidev-user is active". I tested the rmmod & write path but didn't check the read path. I am sorry. The read logic changed and spidev_sync_read() + spidev_sync_write() do not return zero on success anymore but the number of bytes that has been transfered over the bus. This patch changes the logic and copy_to_user() gets called again. The write path returns the number of bytes which are written to the underlying device what may be less than the requested size. This patch makes the same change to the read path or else we request a read of 20 bytes, get 10, don't call copy to user and report to the user that we read 10 bytes. [akpm@linux-foundation.org: remove test of known-to-be-zero local] Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04w100fb: add 80 MHz modelinePhilipp Zabel
This is needed for HTC Blueangel (w3200). At 96MHz its screen flickers. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Ian Molton <spyro@f2s.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04w100fb: do not depend on SHARPSLPhilipp Zabel
Apart from Sharp SL-Cxx series, there are a few other devices that have ATI Imageon chips, among them HP iPAQ hx4700. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Ian Molton <spyro@f2s.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04hdaps: add support for various newer Lenovo thinkpadsmaximilian attems
Adds R61, T61p, X61s, X61, Z61m, Z61p models to whitelist. Fixes this: cullen@lenny:~$ sudo modprobe hdaps FATAL: Error inserting hdaps (/lib/modules/2.6.22-10-generic/kernel/drivers/hwmon/hdaps.ko): No such device [25192.888000] hdaps: supported laptop not found! [25192.888000] hdaps: driver init failed (ret=-19)! Originally based on an Ubuntu patch that got it wrong, the dmidecode output of the corresponding laptops shows LENOVO as the manufacturer. https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/133636 tested on X61s: [ 184.893588] hdaps: inverting axis readings. [ 184.893588] hdaps: LENOVO ThinkPad X61s detected. [ 184.893588] input: hdaps as /class/input/input12 [ 184.924326] hdaps: driver successfully loaded. Cc: Klaus S. Madsen <ubuntu@hjernemadsen.org> Cc: Chuck Short <zulcss@ubuntu.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: maximilian attems <max@stro.at> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04cciss: fix regression that no device nodes are created if no logical drives ↵Stephen M. Cameron
are configured. Fix regression in cciss driver that if no logical drives are configured, no device nodes at all get created. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warningsAnton Vorontsov
This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Timur Tabi <timur@freescale.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: York Sun <yorksun@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04gpio: pca953x (i2c) handles max7310 tooDavid Brownell
The pca953x driver can handle another 8-bit I/O expander, the max7310. This patch adds that chip to the list of supported IDs in that driver, and expands the Kconfig helptext accordingly. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04Miguel Ojeda has movedMiguel Ojeda
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04pci: VT3336 can't do MSI eitherTejun Heo
It seems VT3336 can't do msi either as with its bro 3351. Disable it. Reported in the following SUSE bug. https://bugzilla.novell.com/show_bug.cgi?id=300001 Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04rtc: fix CMOS time error after writing /proc/acpi/alarmHuacai Chen
When writing /proc/acpi/alarm in adjust mode, e.g. echo "+0000-00-00 00:00:15" >/proc/acpi/alarm The "century" field should be read and added to "year" field before writing, otherwise the CMOS time will go back to 2000 years ago, e.g. # cat /proc/acpi/alarm 0008-06-21 11:38:46 Then the system time may be reset to the date of manufacture after rebooting. This patch fixed this issue. Signed-off-by: Huacai Chen <huacai.chen@intel.com> Acked-by: Pavel Machek <pavel@suse.cz> Acked-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04rtc-x1205: Fix alarm setMichael Hamel
I have discovered that the current version of rtc-x1205.c does not work correctly when asked to set the alarm time by the RTC_WKALM_SET ioctl() call. This happens because the alarm registers do not behave like the current-time registers. They are non-volatile. Two things go wrong: - the X1205 requires a 10 msec delay after any attempt to write to the non-volatile registers. The x1205_set_datetime() routine does the write as 8 single-byte writes without any delay. Only the first write succeeds. The second is NAKed because the chip is busy. - the X1205 resets the RWEL bit after any write to the non-volatile registers. This would lock out any further writes after the first even with a 10msec delay. I fix this by doing a single 8-byte write and then waiting 10msec for the chip to be ready. A side effect of this change is that it will speed up x1205_rtc_set_time() which uses the same code. I have also implemented the 'enable' bit in the rtc_wkalm structure, which the existing driver does not attempt to do. I have modified both x1205_rtc_set_alarm() to set the AL0E bit, and x1205_rtc_read_alarm() to return it. I have tested this patch on a LinkSys NSLU2 under OpenWRT, but on no other hardware. On the NSLU2 the X1205 correctly asserts its IRQ pin when the alarm time matches the current time. [akpm@linux-foundation.org: clean up over-parenthesisation] Signed-off-by: Michael Hamel <mhamel@adi.co.nz> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04serial: fix serial_match_port() for dynamic major tty-device numbersGuennadi Liakhovetski
As reported by Vipul Gandhi, the current serial_match_port() doesn't work for tty-devices using dynamic major number allocation. Fix it. It oopses if you suspend a serial port with _dynamic_ major number. ATM, I think, there's only the drivers/serial/jsm/jsm_driver.c driver, that does it in-tree. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Vipul Gandhi <vcgandhi1@aol.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04rtc: rtc_read_alarm() handles wraparoundDavid Brownell
While 0e36a9a4a788e4e92407774df76c545910810d35 ("rtc: fix readback from /sys/class/rtc/rtc?/wakealarm") made sure that active alarms were never returned with invalid "wildcard" fields (negative), it can still report (wrongly) that the alarm triggers in the past. Example, if it's now 10am, an alarm firing at 5am will be triggered TOMORROW not today. (Which may also be next month or next year...) This updates that alarm handling in three ways: * Handle alarm rollover in the common cases of RTCs that don't support matching on all date fields. * Skip the invalid-field logic when it's not needed. * Minor bugfix ... tm_isdst should be ignored, it's one of the fields Linux doesn't maintain. A warning is emitted for some of the unhandled rollover cases, but the possible combinations are a bit too numerous to handle every bit of potential hardware and firmware braindamage. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mark Lord <lkml@rtr.ca> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: safer logic for limit_warnings libata-sff: improve HSM violation reporting ahci: always clear all bits in irq_stat sata_sil24: add DID for another adaptec flavor sata_uli: hardreset is broken
2008-07-04sata_mv: safer logic for limit_warningsMark Lord
There is a miniscule chance that two separate host controllers might be in sata_mv at the same time and manage to decrement the static limit_warnings variable below zero. Fix the comparison to deal with it. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04libata-sff: improve HSM violation reportingTejun Heo
Improve SFF HSM violation reporting such that each HSM violation can be distinguished using ehi_desc. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04ahci: always clear all bits in irq_statTejun Heo
Some AHCI controllers (ICH7 was reported) set pending bit in HOST_IRQ_STAT for non-existent ports and when it's not cleared falls into IRQ storm. Always clear full irq_stat instead of only the bits that are handled. As nothing changes for recognized ports, the risk of breaking things is pretty low. Reported and verified by Philipp Thomas in the following suse bugzilla. https://bugzilla.novell.com/attachment.cgi?id=215692 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Philipp Thomas <pth@novell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-04sata_sil24: add DID for another adaptec flavorTejun Heo
There's another DID used for Adaptec card. Add it. Reported by Travis Read. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Travis Read <ics@dark.net.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-03USB: adding comment for ipaq forcing number of portsOliver Neukum
The reason for forcing a number of ports should be documented. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: fix Oops on loading ipaq module since 2.6.26Oliver Neukum
Fixes bugzilla.kernel.org #10868 Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: add a pl2303 device idGreg Kroah-Hartman
As reported by Ken A Scott <kscott9@sent.com> Cc: Ken A Scott <kscott9@sent.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: another option device idGreg Kroah-Hartman
Thanks to umesh b <umesh.kollam@gmail.com> for the information here. Cc: umesh b <umesh.kollam@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: don't lose disconnections during suspendAlan Stern
This patch (as1111) fixes a bug in the hub driver. When a hub resumes, disconnections that occurred while the hub was suspended are lost. A completely different fix for this problem has already been accepted for 2.6.27; however the problem still needs to be handled in 2.6.26. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Lukas Hejtmanek <xhejtman@ics.muni.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: fix interrupt disabling for HCDs with shared interrupt handlersStefan Becker
USB: fix interrupt disabling for HCDs with shared interrupt handlers As has been discussed several times on LKML, IRQF_SHARED | IRQF_DISABLED doesn't work reliably, i.e. a shared interrupt handler CAN'T be certain to be called with interrupts disabled. Most USB HCD handlers use IRQF_DISABLED and therefore havoc can break out if they share their interrupt with a handler that doesn't use it. On my test machine the yenta_socket interrupt handler (no IRQF_DISABLED) was registered before ehci_hcd and one uhci_hcd instance. Therefore all usb_hcd_irq() invocations for ehci_hcd and for one uhci_hcd instance happened with interrupts enabled. That led to random lockups as USB core HCD functions that acquire the same spinlock could be called twice from interrupt handlers. This patch updates usb_hcd_irq() to always disable/restore interrupts. usb_add_hcd() will silently remove any IRQF_DISABLED requested from HCD code. Signed-off-by: Stefan Becker <stefan.becker@nokia.com> Cc: stable <stable@kernel.org> Acked-by: David Brownell <david-b@pacbell.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: New device ID for ftdi_sio driverJon K Hellan
Here's a new device ID for the ftdio_sio driver. The diff is with linus's tree as of this morning. The device is the RigExpert Tiny USB Soundcard Transceiver Interface for ham radio. (I didn't actually test this. A fellow ham couldn't get the device to work, and I suggested binding the device ID using sysfs - see "http://jk.ufisa.uninett.no/usb/". However, he had had moved on to other things by then. I guess adding the device ID to the kernel "on spec" won't hurt. The relevant part of cat /proc/bus/usb/devices shows: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=ed22 Rev= 5.00 S: Manufacturer=FTDI S: Product=MixW RigExpert Tiny S: SerialNumber=00000000 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ) From: Jon K Hellan <hellan@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03sisusbvga: Fix oops on disconnect.Will Newton
Remove dev_info call on disconnect. The sisusb_dev pointer may have been set to zero by sisusb_delete at this point causing an oops. The message does not provide any extra information over the standard USB subsystem output so removing it does not affect functionality. Signed-off-by: Will Newton <will.newton@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: mass storage: new id for US_SC_CYP_ATACBmatthieu castet
CY7C68310 chip also support cypress atacb "ATA command" pass_thru. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: ohci - record data toggle after unlinkDavid Brownell
This patch fixes a problem with OHCI where canceling bulk or interrupt URBs may lose track of the right data toggle. This seems to be a longstanding bug, possibly dating back to the Linux 2.4 kernel, which stayed hidden because (a) about half the time the data toggle bit was correct; (b) canceling such URBs is unusual; and (c) the few drivers which cancel these URBs either [1] do it only as part of shutting down, or [2] have fault recovery logic, which recovers. For those transfer types, the toggle is normally written back into the ED when each TD is retired. But canceling bypasses the mechanism used to retire TDs ... so on average, half the time the toggle bit will be invalid after cancelation. The fix is simple: the toggle state of any canceled TDs are propagated back to the ED in the finish_unlinks function. (Issue found by leonidv11@gmail.com ...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Leonid <leonidv11@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: ehci - fix timer regressionDavid Brownell
This patch fixes a regression in the EHCI driver's TIMER_IO_WATCHDOG behavior. The patch "USB: EHCI: add separate IAA watchdog timer" changed how that timer is handled, so that short timeouts on the remaining timer (unfortunately, overloaded) would never be used. This takes a more direct approach, reorganizing the code slightly to be explicit about only the I/O watchdog role now being overridable. It also replaces a now-obsolete comment describing older timer behavior. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Leonid <leonidv11@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03USB: fix cdc-acm resume()Oliver Neukum
cdc-acm has - a memory leak in resume() - will fail to reactivate the read code path if this is needed. his corrects it by deleting the useless relict code. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-03OHCI: Fix problem if SM501 and another platform driver is selectedBen Dooks
If the SM501 and another platform driver, such as the SM501 then we end up defining PLATFORM_DRIVER twice. This patch seperated the SM501 onto a seperate define of SM501_OHCI_DRIVER so that it can be selected without overwriting the original definition. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: acpiphp: cleanup notify handler on all root bridges PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev. PCI: Restrict VPD read permission to root
2008-07-02Merge branch 'i2c-fix' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-fix' of git://aeryn.fluff.org.uk/bjdooks/linux: I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device. I2C: S3C2410: Fixup error codes returned rom a transfer. I2C: S3C2410: Check ACK on byte transmission
2008-07-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (8178): uvc: Fix compilation breakage for the other drivers, if uvc is selected V4L/DVB (8145a): USB Video Class driver
2008-07-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: fix /proc/ide/ide?/mate reporting Revert "BAST: Remove old IDE driver"
2008-07-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5131/1: Annotate platform_secondary_init with trace_hardirqs_off [ARM] 5117/1: pxafb: fix __devinit/exit annotations [ARM] Export dma_sync_sg_for_device() [ARM] 5109/1: Mark rtc sa1100 driver as wakeup source before registering it [ARM] 5116/1: pxafb: cleanup and fix order of failure handling [ARM] 5115/1: pxafb: fix ifdef for command line option handling ARM: OMAP: Correcting the gpmc prefetch control register address ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq
2008-07-02tty: Fix inverted logic in send_breakAlan Cox
Not sure how this came to get inverted but it appears to have been my mess up. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>