aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-06calibrate_delay() must be __cpuinitAdrian Bunk
calibrate_delay() must be __cpuinit, not __{dev,}init. I've verified that this is correct for all users. While doing the latter, I also did the following cleanups: - remove pointless additional prototypes in C files - ensure all users #include <linux/delay.h> This fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder') WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Zankel <chris@zankel.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06parport_pc: detection for SuperIO IT87XX POSTPetr Cvek
Add detection for IT87XX SuperIO chip and disabling its POST feature, which made noise on parallel port's pins. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ik8: add Dell UK 6400 Inspiron model (MM061)Nick Warne
Add the Dell UK 6400 Inspiron model (MM061) to allow the i8k module to load correctly without using 'force=1' Signed-off-by: "Nick Warne" <nick@ukfsn.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06parport_serial: netmos 9855 fixChristian Pellegrin
Fix wrong netmos 9855 serial port configuration. On loading only one serial port was present and it wasn't working. After looking in the data sheet I realized that the base address was wrong. For further reference here is lspci and relevant dmesg output: 02:00.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O Controller (rev 01) (prog-if 02) Subsystem: LSI Logic / Symbios Logic Unknown device 0022 Flags: medium devsel, IRQ 19 I/O ports at df00 [size=8] I/O ports at de00 [size=8] I/O ports at dd00 [size=8] I/O ports at dc00 [size=8] I/O ports at db00 [size=8] I/O ports at da00 [size=16] parport1: PC-style at 0xdd00 [PCSPP,TRISTATE] parport2: PC-style at 0xdf00 [PCSPP,TRISTATE,EPP] 0000:02:00.0: ttyS0 at I/O 0xdb00 (irq = 19) is a 16550A 0000:02:00.0: ttyS1 at I/O 0xda00 (irq = 19) is a 16550A Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Cc: Thomas Richter <thor@math.TU-Berlin.DE> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Martin Schitter <ms@gewi.kfunigraz.ac.at> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06parport: add support for the Quatech SPPXP-100 Parallel port PCI ExpressCardLuís P Mendes
Added pci device id for the Quatech SPPXP-100 ExpressCard - 0x278 - to include/linux/pci_id.h Modified drivers/parport/parport_pc.c to support the Quatech SPPXP-100 Parallel port PCI ExpressCard [akpm@linux-foundation.org: build fix] Signed-off-by: Luís P Mendes <luis.p.mendes@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Amiga serial driver: port_write_mutex fixupDaniel Walker
The port_write_mutex was converted from a semaphore to a mutex, but there was still this ifdef'd init_MUTEX reference remaining. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/char/ipmi/ipmi_msghandler.c: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
Signed-off-by: Denis Cheng <crquan@gmail.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06tty: enable the echoing of ^C in the N_TTY disciplineJoe Peterson
Turn on INTR/QUIT/SUSP echoing in the N_TTY line discipline (e.g. ctrl-C will appear as "^C" if stty echoctl is set and ctrl-C is set as INTR). Linux seems to be the only unix-like OS (recently I've verified this on Solaris, BSD, and Mac OS X) that does *not* behave this way, and I really miss this as a good visual confirmation of the interrupt of a program in the console or xterm. I remember this fondly from many Unixs I've used over the years as well. Bringing this to Linux also seems like a good way to make it yet more compliant with standard unix-like behavior. [akpm@linux-foundation.org: coding-style fixes] Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/char: use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06uio: nopageNick Piggin
Convert uio from nopage to fault. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Hans J Koch <hjk@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06unix98 allocated_ptys_lock semaphore to mutexDaniel Walker
Convert the unix98 allocated_ptys_lock to a mutex. Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/isdn/i4l/isdn_tty.c: remove write_semDaniel Walker
I couldn't find any users, so removing it.. Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/char/tty_io.c: remove pty_semDaniel Walker
I couldn't find any users, so removing it.. Signed-off-by: Daniel Walker <dwalker@mvista.com> Acked-by: Alan Cox <alan@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06SC26XX: New serial driver for SC2681 uartsThomas Bogendoerfer
New serial driver for SC2681/SC2691 uarts. Older SNI RM400 machines are using these chips for onboard serial ports. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Torben Mathiasen <device@lanana.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06char: use SGI_HAS_DS1286 for SGI_DS1286 dependsThomas Bogendoerfer
Use SGI_HAS_DS1286 for SGI_DS1286 depends Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06serial: use SGI_HAS_ZILOG for IP22_ZILOG dependsThomas Bogendoerfer
- Use SGI_HAS_ZILOG for IP22_ZILOG depends - remove IP22 from description, because the driver works on more than IP22 SGI machines Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/char/random.c:write_pool() cond_resched() neededMatt Mackall
Reduce latency for large writes to /dev/[u]random Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: Sami Farin <safari-kernel@safari.iki.fi> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06synclink_gt fix missed serial input signal changesPaul Fulghum
Fix missed serial input signal changes caused by rereading the serial status register during interrupt processing. Now processing is performed on original status register value. Signed-off-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06synclink: standardize format of linux header file include's with "<>"Robert P. J. Day
Use the recommended form of "<>" to include linux header files, and move those includes up to join the rest of the linux includes. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06via-rng: enable secondary noise source on CPUs where it is presentDave Jones
In the padlock spec: "SRC Bits[9:8] Noise source select (I): These bits control the two noise sources on the processor that input bits to the accumulation buffers. On Nehemiah processors prior to stepping 8, these bits are reserved and undefined. The default RESET state is both bits = 0." Signed-off-by: Dave Jones <davej@redhat.com> Tested-by: Udo van den Heuvel <udovdh@xs4all.nl> Cc: Michael Buesch <mb@bu3sch.de> Cc: folkert van Heusden <folkert@vanheusden.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06vt: bitlock fixNick Piggin
vt is missing a memory barrier to close the critical section. Use a real spinlock for this. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06tpm.c: fix crash during device removalRichard MUSIL
The clean up procedure now uses platform device "release" callback to handle memory clean up. For this purpose "release" function callback was added to struct tpm_vendor_specific, so hw device driver provider can get called when it is safe to remove all allocated resources. This is supposed to fix a bug in device removal, where device while in receive function (waiting on timeout) was prone to segfault, if the tpm_chip struct was unallocated before the timeout expired (in tpm_remove_hardware). Acked-by: Marcel Selhorst <tpm@selhorst.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06cciss: use upper_32_bits() macro to eliminate warningsRandy Dunlap
Use upper_32_bits(x) macro to handle shifts that may be >= the width of the data type. drivers/block/cciss.c: In function 'do_cciss_request': drivers/block/cciss.c:2655: warning: right shift count >= width of type drivers/block/cciss.c:2656: warning: right shift count >= width of type drivers/block/cciss.c:2657: warning: right shift count >= width of type drivers/block/cciss.c:2658: warning: right shift count >= width of type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rd: use is_power_of_2() in drivers/block/rd.c.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/misc/lkdtm.c: cleanupsAdrian Bunk
- make needlessly global functions static - make lkdtm_module_{init,exit}() as __{init,exit} Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ankita Garg <ankita@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06proper prototype for vty_init()Adrian Bunk
Add a proper prototype for vty_init() in include/linux/vt_kern.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06scheduled OSS driver removalAdrian Bunk
This patch contains the scheduled removal of OSS drivers whose config options have been removed in 2.6.23. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06cleanup after APUS removalAdrian Bunk
After the APUS removal, some code can be removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06register_cpu __devinit or __cpuinitRandy Dunlap
Is there some reason why register_cpu() is __devinit instead of __cpuinit ? Make it __cpuinit. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Allow auto-destruction of loop devicesDavid Woodhouse
This allows a flag to be set on loop devices so that when they are closed for the last time, they'll self-destruct. In general, so that we can automatically allocate loop devices (as with losetup -f) and have them disappear when we're done with them. In particular, right now, so that we can stop relying on the hackish special-case in umount(8) which kills off loop devices which were set up by 'mount -oloop'. That means we can stop putting crap in /etc/mtab which doesn't belong there, which means it can be a symlink to /proc/mounts, which means yet another writable file on the root filesystem is eliminated and the 'stateless' folks get happier... and OLPC trac #356 can be closed. The mount(8) side of that is at http://marc.info/?l=util-linux-ng&m=119362955431694&w=2 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Bernardo Innocenti <bernie@codewiz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Parallel port: convert port_mutex to the mutex APIMatthias Kaehlcke
Parallel port: Convert port_mutex to the mutex API [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06dcdbas: add DMI-based module autloadingMatt Domsch
DMI autoload dcdbas on all Dell systems. This looks for BIOS Vendor or System Vendor == Dell, so this should work for systems both Dell-branded and those Dell builds but brands for others. It causes udev to load the dcdbas module at startup, which is used by tools called by HAL for wireless control and backlight control, among other uses. Thanks to Kay Sievers for figuring out how to do this with a single alias. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Genericizing iova.[ch]David Miller
I would like to potentially move the sparc64 IOMMU code over to using the nice new drivers/pci/iova.[ch] code for free area management.. In order to do that we have to detach the IOMMU page size assumptions which only really need to exist in the intel-iommu.[ch] code. This patch attempts to implement that. [akpm@linux-foundation.org: build fix] Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Remove pointless casts from void pointersJeff Garzik
Mostly in and around irq handlers. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Karsten Keil <kkeil@suse.de> Acked-by: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: David Brownell <david-b@pacbell.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Remove inclusions of <linux/autoconf.h>Ralf Baechle
Nothing should ever include this file. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: "Mike Frysinger" <vapier.adi@gmail.com> Acked-by: "Bryan Wu" <cooloney.lkml@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06riscom8: fix SMP brokennessJeff Garzik
After analyzing the elements that save_flags/cli/sti/restore_flags were protecting, convert their usages to a global spinlock (the easiest and most obvious next-step). There were some usages of flags being intentionally cached, because the code already knew the state of interrupts. These have been taken into account. This allows us to remove CONFIG_BROKEN_ON_SMP. Completely untested. [akpm@linux-foundation.org: use DEFINE_SPINLOCK] Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fix ! versus & precedence in various placesAlexey Dobriyan
Fix various instances of if (!expr & mask) which should probably have been if (!(expr & mask)) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits) ide-tape: bump minor driver version ide-tape: cleanup the remaining codestyle issues ide-tape: fix syntax error in idetape_identify_device() ide-tape: remove leftover OnStream support warning ide-tape: collect module-related macro calls at the end ide-tape: include proper headers ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd() ide-tape: remove struct idetape_id_gcw ide-tape: cleanup and fix comments ide-tape: shorten some function names ide-tape: remove idetape_increase_max_pipeline_stages() ide-tape: struct idetape_tape_t: shorten member names v2 ide-tape: struct idetape_tape_t: remove unused members ide-tape: remove typedef idetape_chrdev_direction_t ide-tape: simplify code branching in the interrupt handler ide-tape: remove unreachable code chunk ide-tape: remove struct idetape_read_position_result_t ide-tape: refactor the debug logging facility ide: add ide_read_error() inline helper ide: add ide_read_[alt]status() inline helpers ...
2008-02-05Merge branch 'dmapool' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: pool: Improve memory usage for devices which can't cross boundaries Change dmapool free block management dmapool: Tidy up includes and add comments dmapool: Validate parameters to dma_pool_create Avoid taking waitqueue lock in dmapool dmapool: Fix style problems Move dmapool.c to mm/ directory
2008-02-06ide-tape: bump minor driver versionBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: cleanup the remaining codestyle issuesBorislav Petkov
... thus decreasing checkpatch.pl errors to 0. Bart: - remove needless function prototypes while at it - remove needless parentheses while at it - add missing KERN_ level to ide_tape_probe() - other minor fixups Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: fix syntax error in idetape_identify_device()Borislav Petkov
Spotted by Sergei Shtylyov. CC: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: remove leftover OnStream support warningBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: collect module-related macro calls at the endBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: include proper headersBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd()Borislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: remove struct idetape_id_gcwBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: cleanup and fix commentsBorislav Petkov
Also, remove redundant ones and cleanup whitespace. Bart: - minor fixups Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: shorten some function namesBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: remove idetape_increase_max_pipeline_stages()Borislav Petkov
This function was being used only at one place so fold it in there. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>