aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-08-16[WATCHDOG] Add support for 1533 bridge to alim1535_wdtAndrey Borzenkov
From: Andrey Borzenkov <arvidjaar@mail.ru> They are apparently pretty close (even lspci combines them). The patch adds support for 0x1533 bridge in addition to 0x1535. Tested on Toshiba Portege 4000 with 00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] [10b9:1533] 00:08.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU] [10b9:7101] with result [ 2090.906736] PCI: Enabling device 0000:00:08.0 (0000 -> 0001) [ 2090.914034] ALi_M1535: initialized. timeout=3D60 sec (nowayout=3D0) Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-08-16[WATCHDOG] Eurotechwdt.c - clean-up commentsWim Van Sebroeck
Clean-up history and add a comment about the fact that the watchdog is actually part of the SMSC FDC 37B782 super I/O chipset. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-08-14Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-s3c2410: Build fix i2c/menelaus: Build fix i2c-mv64xxx: Reinitialize hw and driver on I2C bus hang i2c-mpc: Don't disable I2C module on stop condition i2c-iop3xx: Set I2C_CLASS_HWMON to adapter class i2c/isp1301_omap: Build fixes, whitespace i2c-mpc: Pass correct dev_id to free_irq on error path i2c-i801: Typo: erroneous
2007-08-14i2c-s3c2410: Build fixBen Dooks
Fixup the include files after the arch moves that where included in 2.6.23. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c/menelaus: Build fixDavid Brownell
Fix Menelaus build error, and remove needless "#define DEBUG". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-mv64xxx: Reinitialize hw and driver on I2C bus hangDale Farnsworth
Under certain conditions, the mv64xxx I2C bus can hang preventing further operation. To make the driver more robust, we now reset the I2C hardware and the driver state machine when such hangs are detected. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-mpc: Don't disable I2C module on stop conditionDomen Puncer
Disabling module on stop doesn't work on some CPUs (ie. mpc8241, as reported by Guennadi Liakhovetski), so remove that. Disable I2C module on errors/interrupts to prevent it from locking up on mpc5200b. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-iop3xx: Set I2C_CLASS_HWMON to adapter classArnaud Patard
In order to be able to use sensors on the IOP3xx SoCs, one needs to set the adapter class to I2C_CLASS_HWMON. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c/isp1301_omap: Build fixes, whitespaceDavid Brownell
Build fixes for isp1301_omap driver. I think an earlier version of this must have gotten lost somewhere, or maybe it only went into the Linux-OMAP tree. Also, some whitespace fixes to bring this more into sync with the version of this found in the Linux-OMAP tree. (That version has updates for the OTG controller on the OMAP 1710 which break that functionality on OMAP 161x boards like the H2, so merging all of it is not currently an option.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-mpc: Pass correct dev_id to free_irq on error pathScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-i801: Typo: erroneousJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPVS]: Use IP_VS_WAIT_WHILE when encessary. [NET]: Share correct feature code between bridging and bonding [ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc [IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]alloc [WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzalloc [DCCP]: fix memory leak and clean up style - dccp_feat_empty_confirm() [DCCP]: fix theoretical ccids_{read,write}_lock() race [XFRM]: Clean up duplicate includes in net/xfrm/ [TIPC]: Clean up duplicate includes in net/tipc/ [SUNRPC]: Clean up duplicate includes in net/sunrpc/ [PKT_SCHED]: Clean up duplicate includes in net/sched/ [IPV6]: Clean up duplicate includes in net/ipv6/ [IPV4]: Clean up duplicate includes in net/ipv4/ [ATM]: Clean up duplicate includes in net/atm/ [ATM]: Clean up duplicate includes in drivers/atm/ [IPCONFIG]: ip_auto_config fix [ATM]: fore200e_param_bs_queue() must be __devinit
2007-08-14Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: e1000: Add device IDs of new 82571 board variants xen-netfront: Avoid deref'ing skbafter it is potentially freed. 3c59x maintainer 3c59x: fix duplex configuration natsemi: fix netdev error acounting ax88796 printk fixes myri10ge: Use the pause counter to avoid a needless device reset via-rhine: disable rx_copybreak on archs that don't allow unaligned DMA access
2007-08-14e1000: Add device IDs of new 82571 board variantsAuke Kok
This patch adds support for 2 new board variants: - A Quad port fiber 82571 board - A blade version of the 82571 quad copper board Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-13[NET]: Share correct feature code between bridging and bondingHerbert Xu
http://bugzilla.kernel.org/show_bug.cgi?id=8797 shows that the bonding driver may produce bogus combinations of the checksum flags and SG/TSO. For example, if you bond devices with NETIF_F_HW_CSUM and NETIF_F_IP_CSUM you'll end up with a bonding device that has neither flag set. If both have TSO then this produces an illegal combination. The bridge device on the other hand has the correct code to deal with this. In fact, the same code can be used for both. So this patch moves that logic into net/core/dev.c and uses it for both bonding and bridging. In the process I've made small adjustments such as only setting GSO_ROBUST if at least one constituent device supports it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-13[ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzallocMariusz Kozlowski
drivers/atm/iphase.c | 111508 -> 111431 (-77 bytes) drivers/atm/iphase.o | 254740 -> 254260 (-480 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-13[IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]allocMariusz Kozlowski
drivers/net/irda/irda-usb.c | 59694 -> 59541 (-153 bytes) drivers/net/irda/irda-usb.o | 170588 -> 169256 (-1332 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-13[WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzallocMariusz Kozlowski
drivers/net/wan/hdlc_fr.c | 31260 -> 31223 (-37 bytes) drivers/net/wan/hdlc_fr.o | 144872 -> 144728 (-144 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-08-13[ATM]: Clean up duplicate includes in drivers/atm/Jesper Juhl
This patch cleans up duplicate includes in drivers/atm/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-13[ATM]: fore200e_param_bs_queue() must be __devinitAdrian Bunk
WARNING: drivers/built-in.o(.text+0x6203bb): Section mismatch: reference to .init.text:fore200e_param_bs_queue (between 'fore200e_initialize' and 'fore200e_monitor_putc') Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14xen-netfront: Avoid deref'ing skbafter it is potentially freed.Jeremy Fitzhardinge
xennet_tx_bug_gc can free the skb before we use it, so make sure we don't. Signed-off-by: Keir Fraser <keir@xensource.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-143c59x: fix duplex configurationSteffen Klassert
A special sequence of ifconfig up/down and plug/unplug the cable can break the duplex configuration of the driver. Setting vp->mii.full_duplex = vp->full_duplex in vortex_up should fix this. Addresses Bug 8575 3c59x duplex configuration broken http://bugzilla.kernel.org/show_bug.cgi?id=8575 Cc: Martin Buck <mb-tmp-ohtmvyyn.xreary.bet@gromit.dyndns.org> Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Cc: Natalie Protasevich <protasnb@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14natsemi: fix netdev error acountingAndrew Morton
When a detailed netdev error is counted, we also must account for it in the aggregated error count. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8106 Cc: Tim Hockin <thockin@hockin.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Chongfeng Hu <loveminix@yahoo.com.cn> Cc: Natalie Protasevich <protasnb@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14ax88796 printk fixesAndrew Morton
drivers/net/ax88796.c: In function `ax_probe': drivers/net/ax88796.c:825: warning: size_t format, different type arg (arg 4) drivers/net/ax88796.c:825: warning: size_t format, different type arg (arg 5) resource_size_t isn't size_t. Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14myri10ge: Use the pause counter to avoid a needless device resetBrice Goglin
Use the pause counter to avoid a needless device reset, and print a message telling the admin that our link partner is flow controlling us down to 0 pkts/sec. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14via-rhine: disable rx_copybreak on archs that don't allow unaligned DMA accessDustin Marquess
Patch to disable the rx_copybreak feature on hardware architectures that don't allow unaligned DMA access. #ifdef code taken from tulip_core.c. Problem pointed out by Ivan Kokshaysky. Signed-off-by: Dustin Marquess <jailbird@alcatraz.fdf.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14ACPI: EC: Fix "no battery" regressionAlexey Starikovskiy
Restore deleted call to register query methods. http://bugzilla.kernel.org/show_bug.cgi?id=8886 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12Pull sbs into release branchLen Brown
2007-08-12Pull processor into release branchLen Brown
2007-08-12Pull fluff into release branchLen Brown
2007-08-12Pull ec into release branchLen Brown
2007-08-12Pull dock-bay into release branchLen Brown
2007-08-12Pull bugzilla-8842 into release branchLen Brown
2007-08-12Pull bugzilla-8768 into release branchLen Brown
2007-08-12Pull bugzilla-3774 into release branchLen Brown
2007-08-12pull asus sony thinkpad into release branchLen Brown
2007-08-12ACPI: thermal: add DMI hooks to handle AOpen's broken Award BIOSLen Brown
Use DMI to: 1. enable polling (BIOS thermal events are broken) 2. disable active trip points (BIOS fan control is broken) 3. disable passive trip point (BIOS hard-codes it too low) The actual temperature reading does work, and with the aid of polling, the critical trip point should work too. http://bugzilla.kernel.org/show_bug.cgi?id=8842 Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: create "thermal.act=" to disable or override active trip pointLen Brown
thermal.act=-1 disables all active trip points in all ACPI thermal zones. thermal.act=C, where C > 0, overrides all lowest temperature active trip points in all thermal zones to C degrees Celsius. Raising this trip-point may allow you to keep your system silent up to a higher temperature. However, it will not allow you to raise the lowest temperature trip point above the next higher trip point (if there is one). Lowering this trip point may kick in the fan sooner. Note that overriding this trip-point will disable any BIOS attempts to implement hysteresis around the lowest temperature trip point. This may result in the fan starting and stopping frequently if temperature frequently crosses C. WARNING: raising trip points above the manufacturer's defaults may cause the system to run at higher temperature and shorten its life. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: create "thermal.nocrt" to disable critical actionsLen Brown
thermal.nocrt=1 disables actions on _CRT and _HOT ACPI thermal zone trip-points. They will be marked as <disabled> in /proc/acpi/thermal_zone/*/trip_points. There are two cases where this option is used: 1. Debugging a hot system crossing valid trip point. If your system fan is spinning at full speed, be sure that the vent is not clogged with dust. Many laptops have very fine thermal fins that are easily blocked. Check that the processor fan-sink is properly seated, has the proper thermal grease, and is really spinning. Check for fan related options in BIOS SETUP. Sometimes there is a performance vs quiet option. Defaults are generally the most conservative. If your fan is not spinning, yet /proc/acpi/fan/ has files in it, please file a Linux/ACPI bug. WARNING: you risk shortening the lifetime of your hardware if you use this parameter on a hot system. Note that this refers to all system components, including the disk drive. 2. Working around a cool system crossing critical trip point due to erroneous temperature reading. Try again with CONFIG_HWMON=n There is known potential for conflict between the the hwmon sub-system and the ACPI BIOS. If this fixes it, notify lm-sensors@lm-sensors.org and linux-acpi@vger.kernel.org Otherwise, file a Linux/ACPI bug, or notify just linux-acpi@vger.kernel.org. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: create "thermal.psv=" to override passive trip pointsLen Brown
"thermal.psv=-1" disables passive trip points for all ACPI thermal zones. "thermal.psv=C", where 'C' is degrees Celsius, overrides all existing passive trip points for all ACPI thermal zones. thermal.psv is checked at module load time, and in response to trip-point change events. Note that if the system does not deliver thermal zone temperature change events near the new trip-point, then it will not be noticed. To force your custom trip point to be noticed, you may need to enable polling: eg. thermal.tzp=3000 invokes polling every 5 minutes. Note that once passive thermal throttling is invoked, it has its own internal Thermal Sampling Period (_TSP), that is unrelated to _TZP. WARNING: disabling or raising a thermal trip point may result in increased running temperature and shorter hardware lifetime on some systems. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: expose "thermal.tzp=" to set global polling frequencyLen Brown
Thermal Zone Polling frequency (_TZP) is an optional ACPI object recommending the rate that the OS should poll the associated thermal zone. If _TZP is 0, no polling should be used. If _TZP is non-zero, then the platform recommends that the OS poll the thermal zone at the specified rate. The minimum period is 30 seconds. The maximum period is 5 minutes. (note _TZP and thermal.tzp units are in deci-seconds, so _TZP = 300 corresponds to 30 seconds) If _TZP is not present, ACPI 3.0b recommends that the thermal zone be polled at an "OS provided default frequency". However, common industry practice is: 1. The BIOS never specifies any _TZP 2. High volume OS's from this century never poll any thermal zones Ie. The OS depends on the platform's ability to provoke thermal events when necessary, and the "OS provided default frequency" is "never":-) There is a proposal that ACPI 4.0 be updated to reflect common industry practice -- ie. no _TZP, no polling. The Linux kernel already follows this practice -- thermal zones are not polled unless _TZP is present and non-zero. But thermal zone polling is useful as a workaround for systems which have ACPI thermal control, but have an issue preventing thermal events. Indeed, some Linux distributions still set a non-zero thermal polling frequency for this reason. But rather than ask the user to write a polling frequency into all the /proc/acpi/thermal_zone/*/polling_frequency files, here we simply document and expose the already existing module parameter to do the same at system level, to simplify debugging those broken platforms. Note that thermal.tzp is a module-load time parameter only. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-12ACPI: thermal: create "thermal.off=1" to disable ACPI thermal supportLen Brown
"thermal.off=1" disables all ACPI thermal support at boot time. CONFIG_ACPI_THERMAL=n can do this at build time. "# rmmod thermal" can do this at run time, as long as thermal is built as a module. WARNING: On some systems, disabling ACPI thermal support will cause the system to run hotter and reduce the lifetime of the hardware. Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-11ACPI: staticAdrian Bunk
Make the needlessly global "acpi_event_seqnum" static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-11ACPI EC: remove potential deadlock from ECAlexey Starikovskiy
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-11ACPI: dock: Send key=value pair instead of plain valueHolger Macht
Send key=value pair along with the uevent instead of a plain value so that userspace (udev) can handle it like common environment variables. Signed-off-by: Holger Macht <hmacht@suse.de> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Stephan Berberig <s.berberig@arcor.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-11ACPI: bay: send envp with uevent - fixStephan Berberig
There must not be a new-line character in the uevent. Otherwise, udev gets confused. Thanks to Kay Sievers for pointing it out. Signed-off-by: Stephan Berberig <s.berberig@arcor.de> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-11Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] monwriter: Serialization bug for multithreaded applications. [S390] vmur: diag14 only works with buffers below 2GB [S390] vmur: add "top of queue" sanity check for reader open [S390] vmur: reject open on z/VM reader files with status HOLD [S390] vmur: use DECLARE_COMPLETION_ONSTACK to keep lockdep happy [S390] vmur: allocate single record buffers instead of one big data buffer [S390] remove DEFAULT_MIGRATION_COST [S390] qdio: make sure data structures are correctly aligned. [S390] hypfs: implement show_options [S390] cio: avoid memory leak on error in css_alloc_subchannel().
2007-08-11Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: BLOCK: Hide the contents of linux/bio.h if CONFIG_BLOCK=n sysace: HDIO_GETGEO has it's own method for ages drivers/block/cpqarray.c: better error handling and kmalloc + memset conversion to k[cz]alloc drivers/block/cciss.c: kmalloc + memset conversion to kzalloc Clean up duplicate includes in drivers/block/ Fix remap handling by blktrace [PATCH] remove mm/filemap.c:file_send_actor()
2007-08-11i386: Make patching more robust, fix paravirt issueAndi Kleen
Commit 19d36ccdc34f5ed444f8a6af0cbfdb6790eb1177 "x86: Fix alternatives and kprobes to remap write-protected kernel text" uses code which is being patched for patching. In particular, paravirt_ops does patching in two stages: first it calls paravirt_ops.patch, then it fills any remaining instructions with nop_out(). nop_out calls text_poke() which calls lookup_address() which calls pgd_val() (aka paravirt_ops.pgd_val): that call site is one of the places we patch. If we always do patching as one single call to text_poke(), we only need make sure we're not patching the memcpy in text_poke itself. This means the prototype to paravirt_ops.patch needs to change, to marshal the new code into a buffer rather than patching in place as it does now. It also means all patching goes through text_poke(), which is known to be safe (apply_alternatives is also changed to make a single patch). AK: fix compilation on x86-64 (bad rusty!) AK: fix boot on x86-64 (sigh) AK: merged with other patches Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-11lguest files should explicitly include asm/paravirt.hJes Sorensen
Files using bits from paravirt.h should explicitly include it rather than relying on it being pulled in by something else. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 03:49:48 +0000