aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-09-27[PATCH] inode_diet: Replace inode.u.generic_ip with inode.i_privateTheodore Ts'o
The following patches reduce the size of the VFS inode structure by 28 bytes on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction in the inode size on a UP kernel that is configured in a production mode (i.e., with no spinlock or other debugging functions enabled; if you want to save memory taken up by in-core inodes, the first thing you should do is disable the debugging options; they are responsible for a huge amount of bloat in the VFS inode structure). This patch: The filesystem or device-specific pointer in the inode is inside a union, which is pretty pointless given that all 30+ users of this field have been using the void pointer. Get rid of the union and rename it to i_private, with a comment to explain who is allowed to use the void pointer. This is just a cleanup, but it allows us to reuse the union 'u' for something something where the union will actually be used. [judith@osdl.org: powerpc build fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Judith Lebzelter <judith@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] NOMMU: Set BDI capabilities for /dev/mem and /dev/kmemDavid Howells
Set the backing device info capabilities for /dev/mem and /dev/kmem to permit direct sharing under no-MMU conditions and full mapping capabilities under MMU conditions. Make the BDI used by these available to all directly mappable character devices. Also comment the capabilities for /dev/zero. [akpm@osdl.org: ifdef reductions] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] mspec driverJes Sorensen
Implement the special memory driver (mspec) based on the do_no_pfn approach. The driver is currently used only on SN2 hardware with special fetchop support but could be beneficial on other architectures using the uncached mode. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] Really ignore kmem_cache_destroy return valueAlexey Dobriyan
* Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (30 commits) i2c: Drop unimplemented slave functions i2c: Constify i2c_algorithm declarations, part 2 i2c: Constify i2c_algorithm declarations, part 1 i2c: Let drivers constify i2c_algorithm data i2c-isa: Restore driver owner i2c-viapro: Add support for the VT8237A and VT8251 i2c: Warn on i2c client creation failure i2c-core: Drop useless bitmaskings i2c-algo-pcf: Discard the mdelay data struct member i2c-algo-bit: Cleanups i2c-isa: Fail adding driver on attach_adapter error i2c: __must_check fixes (chip drivers) i2c-dev: attach/detach_adapter cleanups i2c-stub: Chip address as a module parameter i2c: Plan i2c-isa for removal i2c: New bus driver for TI OMAP boards i2c-algo-bit: Discard the mdelay data struct member i2c-matroxfb: Struct init conversion i2c: Fix copy-n-paste in subsystem Kconfig i2c-au1550: Add I2C support for Au1200 ...
2006-09-26pciehp - fix wrong return valueKenji Kaneshige
This patch fixes the problem that trying to enable already enabled slot disables the slot by returning the proper value from pciehp_enable_slot()/pciehp_disable_slot(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: add support for ioapic hot-removeSatoru Takeuchi
This patch adds support for ioapics hot-remove. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI: assign ioapic resource at hotplugSatoru Takeuchi
We need to assign resources to ioapics being hot-added. This patch changes pbus_assign_resources_sorted() to assign resources if the ioapic has no assigned resources. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: disable bridgesSatoru Takeuchi
Currently acpiphp calls pci_enable_device() against all hot-added bridges, but acpiphp does not call pci_disable_device() against them in hot-remove. So ioapic hot-remove would fail. This patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: stop bus device before acpi_bus_trimSatoru Takeuchi
Contrary to PCI bridge hot-add, we need to follow the sequence below for PCI bridge hot-removal. (1) Stop devices (detach drivers, remove from the global list, etc.) (2) Unbind ACPI node from the devices (remove the _PRT entries) (3) Remove devices (remove from the device list, etc.) This patch fixes acpiphp driver to follow above sequence for P2P bridge hot-removal. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI: add pci_stop_bus_deviceSatoru Takeuchi
This patch adds pci_stop_bus_device() which stops a PCI device (detach the driver, remove from the global list and so on) and any children. This is needed for ACPI based PCI-to-PCI bridge hot-remove, and it will be also needed for ACPI based PCI root bridge hot-remove. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: do not initialize existing ioapicsSatoru Takeuchi
Currently acpiphp initializes all ioapics under the bus on which hot-add event occured. It also initializes already working ioapics. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: initialize ioapics before starting devicesSatoru Takeuchi
Currently acpiphp initializes ioapics after starting devices, but ioapics should be initialized before starting devices. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26acpiphp: set hpp values before starting devicesSatoru Takeuchi
Currently acpiphp sets hpp values after starting devices, but the values should be set before starting devices. This patch fixes this bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI Hotplug: cleanup pcihp skeleton code.Satoru Takeuchi
Cleanup pcihp skeleton code. Fix some typos and remove some unnecessary blank lines. Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI: Restore PCI Express capability registers after PM eventMichael S. Tsirkin
Restore PCI Express capability registers after PM event. This includes maxumum MTU for PCI express and other vital data. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI: drivers/pci/hotplug/acpiphp_glue.c: make a function staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI: Multiprobe sanitizerAlan Cox
There are numerous drivers that can use multithreaded probing but having some kind of global flag as the way to control this makes migration to threaded probing hard and since it enables it everywhere and is almost as likely to cause serious pain as holding a clog dance in a minefield. If we have a pci_driver multithread_probe flag to inherit you can turn it on for one driver at a time. From playing so far however I think we need a different model at the device layer which serializes until the called probe function says "ok you can start another one now". That would need some kind of flag and semaphore plus a helper function. Anyway in the absence of that this is a starting point to usefully play with this stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI: fix __must_check warningsGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI Hotplug: fix __must_check warningsGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26SHPCHP: fix __must_check warningsGreg Kroah-Hartman
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI-Express AER implemetation: pcie_portdrv error handlerZhang, Yanmin
Patch 4 implements error handlers for pcie_portdrv. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI-Express AER implemetation: AER core and aerdriverZhang, Yanmin
Patch 3 implements the core part of PCI-Express AER and aerdrv port service driver. When a root port service device is probed, the aerdrv will call request_irq to register irq handler for AER error interrupt. When a device sends an PCI-Express error message to the root port, the root port will trigger an interrupt, by either MSI or IO-APIC, then kernel would run the irq handler. The handler collects root error status register and schedules a work. The work will call the core part to process the error based on its type (Correctable/non-fatal/fatal). As for Correctable errors, the patch chooses to just clear the correctable error status register of the device. As for the non-fatal error, the patch follows generic PCI error handler rules to call the error callback functions of the endpoint's driver. If the device is a bridge, the patch chooses to broadcast the error to downstream devices. As for the fatal error, the patch resets the pci-express link and follows generic PCI error handler rules to call the error callback functions of the endpoint's driver. If the device is a bridge, the patch chooses to broadcast the error to downstream devices. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCI-Express AER implemetation: export pcie_port_bus_typeZhang, Yanmin
Patch 2 exports pcie_port_bus_type. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26PCIE: check and return bus_register errorsRandy Dunlap
Have pcie_port_bus_register() notice and return errors. Mark it __must_check so that its caller(s) must check its return value. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26MSI: Blacklist PCI-E chipsets depending on Hypertransport MSI capabilityBrice Goglin
Introduce msi_ht_cap_enabled() to check the MSI capability in the Hypertransport configuration space. It is used in a generic quirk quirk_msi_ht_cap() to check whether MSI is enabled on hypertransport chipset, and a nVidia specific quirk quirk_nvidia_ck804_msi_ht_cap() where two 2 HT MSI mappings have to be checked. Both quirks set the PCI_BUS_FLAGS_NO_MSI bus flag when MSI is disabled. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26MSI: Rename PCI_CAP_ID_HT_IRQCONF into PCI_CAP_ID_HTBrice Goglin
0x08 is the HT capability, while PCI_CAP_ID_HT_IRQCONF would be the subtype 0x80 that mpic_scan_ht_pic() uses. Rename PCI_CAP_ID_HT_IRQCONF into PCI_CAP_ID_HT. And by the way, use it in the ipath driver instead of defining its own HT_CAPABILITY_ID. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26MSI: Export the PCI_BUS_FLAGS_NO_MSI flag in sysfsBrice Goglin
Export the PCI_BUS_FLAGS_NO_MSI flag of a PCI bus in the sysfs files of its parent device and make it writable. Could be used to: * disable MSI on a device which has not been blacklisted yet * allow MSI when some setpci hacks enable MSI support (for instance on the ServerWorks HT2000 chipset where the MSI HT cap is disabled by default). Architecture where some bus have no parent chipset cannot use this strategy to change MSI support. If the chipset does not have a subordinate bus, its 'bus_msi' file is empty. Also document and warn about the possible danger of changing the flag. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26MSI: Factorize common code in pci_msi_supported()Brice Goglin
pci_enable_msi() and pci_enable_msix() use the same code to detect whether MSI might be enabled on this device. Factorize this code in pci_msi_supported(). And improve the documentation about the fact that only the root chipset must support MSI, but it is hard to find the root bus so we check all parent busses MSI flags. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26MSI: Cleanup existing MSI quirksBrice Goglin
Move MSI quirks in CONFIG_PCI_MSI, document why the serverworks quirk does not simply set PCI_BUS_FLAGS_NO_MSI, and create a generic quirk for other chipsets where setting PCI_BUS_FLAGS_NO_MSI is fine. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c: Constify i2c_algorithm declarations, part 2Jean Delvare
i2c: Constify i2c_algorithm declarations, part 2 Make struct i2c_algorithm declarations const in all i2c bus drivers where it is possible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c: Constify i2c_algorithm declarations, part 1Jean Delvare
i2c: Constify i2c_algorithm declarations, part 1 Make struct i2c_algorithm declarations const in all i2c algorithm drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-isa: Restore driver ownerJean Delvare
i2c-isa: Restore driver owner Commit 2b48716d1d2f2edb1e7cbc5ecf1cb2cb39373e33 back in January 2006 was a bit overzealous. It removed .owner from all i2c drivers, including i2c-isa ones, while they still need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-viapro: Add support for the VT8237A and VT8251Rudolf Marek
i2c-viapro: Add support for the VT8237A and VT8251 Documentation update included. Compile tested. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c: Warn on i2c client creation failureJean Delvare
i2c: Warn on i2c client creation failure Warn when an i2c client creation fails. If we don't, the user will never know something wrong happened, as i2c client creation is typically called through an attach_adapter callback, those return value we currently ignore for technical reasons. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-core: Drop useless bitmaskingsJean Delvare
i2c-core: Drop useless bitmaskings The code generated is exactly the same. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-algo-pcf: Discard the mdelay data struct memberAdrian Bunk
i2c-algo-pcf: Discard the mdelay data struct member Just as i2c-algo-bit, i2c-algo-pcf has an unused mdelay struct member, which we can get rid of to spare some code and memory. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-algo-bit: CleanupsJean Delvare
i2c-algo-bit: Cleanups * Uninline long functions (saves around 1 kB or 15%) * Refactor code in sclhi() * Drop redundant udelay on repeated start Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-isa: Fail adding driver on attach_adapter errorDavid Hubbard
i2c-isa: Fail adding driver on attach_adapter error Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c: __must_check fixes (chip drivers)Jean Delvare
i2c: __must_check fixes (chip drivers) Check for error on sysfs file creation. Delete sysfs files on device removal. The approach taken for the most complex case (pcf8591) is similar to what Mark M. Hoffman proposed for hardware monitoring chip drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Gardner <bgardner@wabtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-dev: attach/detach_adapter cleanupsJean Delvare
i2c-dev: attach/detach_adapter cleanups * Only print that an adapter was attached when it succeeds. * i2c_dev == NULL on detach simply means that the attach failed before, this isn't an error per se. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-stub: Chip address as a module parameterJean Delvare
i2c-stub: Chip address as a module parameter Add a mandatory chip_addr parameter to i2c-stub. This parameter defines to which chip address the driver will respond, instead of reponding to all addresses as before. The idea is to prevent the users from loading i2c-stub at random and being then confused by the results of sensors-detect or other user-space tools. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c: New bus driver for TI OMAP boardsKomal Shah
i2c: New bus driver for TI OMAP boards This patch adds I2C bus driver for various Texas Instruments (TI) OMAP1/2 (http://www.ti.com/omap) series based boards like OMAP1510/1610/1710/242x. Signed-off-by: Komal Shah <komal_shah802003@yahoo.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-algo-bit: Discard the mdelay data struct memberJean Delvare
i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-matroxfb: Struct init conversionJean Delvare
i2c-matroxfb: Struct init conversion Convert the struct i2c_algo_bit_data initialization to proper C99 style. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c: Fix copy-n-paste in subsystem KconfigArthur Othieno
i2c: Fix copy-n-paste in subsystem Kconfig We have: drivers/i2c/Kconfig:2:# Character device configuration Which is obviously not true.. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-au1550: Add I2C support for Au1200Domen Puncer
i2c-au1550: Add I2C support for Au1200 Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-au1550: Add SMBus functionality flagDomen Puncer
i2c-au1550: Add SMBus functionality flag Add SMBus functionality flag, so we can use eeprom and similar drivers. Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-au1550: Fix timeout problemDomen Puncer
i2c-au1550: Fix timeout problem Fix from Jordan Crouse: If the transmit and recieve FIFOS are not empty, forceably flush them rather then waiting for them to drain on their own. This solves at least a problem reported by Clem Taylor: http://www.linux-mips.org/archives/linux-mips/2006-05/msg00240.html (1% of I2C transactions would timeout) Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-26i2c-sibyte: Kip Walker is goneJean Delvare
i2c-sibyte: Kip Walker is gone Kip Walker no longer works at Broadcom, and his e-mail address there bounces back, so let's drop it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>