aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-08-20Revert "USB: EHCI cpufreq fix"Linus Torvalds
This reverts commit 196705c9bbc03540429b0f7cf9ee35c2f928a534. It was reported to cause a regression by Daniel Exner, and Arjan van de Ven points out that we actually already have infrastructure in place for setting limits on acceptable DMA latency that would be the much more correct fix for the problem with some Broadcom EHCI controllers. Fixed up trivial conflicts due to the changes to support big-endian host controller descriptors in drivers/usb/host/{ehci-sched.c,ehci.h}. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide-disk: workaround for buggy HPA support on ST340823A (take 3) hpt34x: fix CONFIG_HPT34X_AUTODMA=n handling triflex: add missing ->dma_base check pdc202xx_old: add missing ->dma_base check pdc202xx_new: add missing ->dma_base check cs5530: add missing ->dma_base check ide: ide_config_drive_speed() bugfixes ide: add cable detection for early UDMA66 devices (take 3) ide-pmac: fix drive->init_speed reporting ide: config_drive_for_dma() fixes ide-cris: fix ->set_pio_mode method to set transfer mode on the device ide: fix hidden dependencies on CONFIG_IDE_GENERIC ide: make CONFIG_IDE_GENERIC default to N
2007-08-20Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6028): Turn an unnecessary mdelay() into msleep(). V4L/DVB (6027): Get rid of an ill-behaved msleep in i2c write V4L/DVB (6026): Avoid powering up the camera on resume V4L/DVB (6016): get_dvb_firmware: update script for new location of tda10046 firmware V4L/DVB (5991): dvb-pll: Set minimum and maximum frequency properly V4L/DVB (5969): ivtv: report ivtv version in status log V4L/DVB (5967): ivtv: fix VIDIOC_S_FBUF:new OSD values where never set V4L/DVB (5968): videodev2.h: remove superfluous FBUF GLOBAL_INV_ALPHA support
2007-08-20ide-disk: workaround for buggy HPA support on ST340823A (take 3)Bartlomiej Zolnierkiewicz
This disk reports total number of sectors instead of maximum sector address in response to READ_NATIVE_MAX_ADDRESS command and also happily accepts SET_MAX_ADDRESS command with the bogus value. This results in +1 sector capacity being used and errors on attempts to use the last sector. ... hdd: Host Protected Area detected.         current capacity is 78165360 sectors (40020 MB)         native  capacity is 78165361 sectors (40020 MB) hdd: Host Protected Area disabled. ... hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000 hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360, sector=78165360 ... Add hpa_list[] table and workaround the issue in idedisk_check_hpa(). v2: * Add missing export and improve patch description a bit. v3: * Add list termination. (From Mikko) Fixes kernel bugzilla bug #8816. Thanks to Mikko for investigating the issue and helping with this patch. Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20hpt34x: fix CONFIG_HPT34X_AUTODMA=n handlingBartlomiej Zolnierkiewicz
Programming DMA mode may destroy current PIO mode setting so if CONFIG_HPT34X_AUTODMA=n (the default case) make ide_tune_dma() fail early by disabling all host DMA masks and re-tune PIO mode. This fix doesn't help with the driver being broken but is needed for some other changes. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20triflex: add missing ->dma_base checkBartlomiej Zolnierkiewicz
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20pdc202xx_old: add missing ->dma_base checkBartlomiej Zolnierkiewicz
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20pdc202xx_new: add missing ->dma_base checkBartlomiej Zolnierkiewicz
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Also this host driver requires valid PCI BAR4 for normal operation so check it in ->init_chipset and fail initialization if not set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20cs5530: add missing ->dma_base checkBartlomiej Zolnierkiewicz
If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks shouldn't be initialized or bad things will happen. Also this host driver requires valid PCI BAR4 for normal operation so check it in ->init_chipset and fail initialization if not set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20ide: ide_config_drive_speed() bugfixesBartlomiej Zolnierkiewicz
* Use ->OUTBSYNC instead of ->OUTB when writing command register (needed for scc_pata and pmac host drivers). * Don't check DRDY bit of the status register on ATAPI devices (ATAPI devices are free to ignore DRDY bit). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20ide: add cable detection for early UDMA66 devices (take 3)Bartlomiej Zolnierkiewicz
* Move ide_in_drive_list() from ide-dma.c to ide-iops.c. * Add ivb_list[] table for listening early UDMA66 devices which don't conform to ATA4 standard wrt cable detection (bit14 is zero, only bit13 is valid) and use only device side cable detection for them since host side cable detection may be unreliable. * Add model "QUANTUM FIREBALLlct10 05" with firwmare "A03.0900" to the list (from Craig's bugreport). v2: * Improve kernel message basing on suggestion from Sergei. v3: * Don't print kernel message when no device side cable detection is done, plus some minor fixes. (Noticed by Sergei) Thanks to Craig for testing this patch. Cc: Craig Block <chblock3@yahoo.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20ide-pmac: fix drive->init_speed reportingBartlomiej Zolnierkiewicz
pmac_ide_tune_chipset() don't set drive->init_speed. Fix it by setting drive->{current,init}_speed in pmac_ide_do_setfeature() and clean up pmac_ide_{tune_chipset,mdma_enable,udma_enable}(). Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20ide: config_drive_for_dma() fixesBartlomiej Zolnierkiewicz
* Add DMA blacklist checking (->ide_dma_on check probably can go now). * Add ->atapi_dma flag checking and remove no longer needed ns87415_ide_dma_check() from ns87415 host driver. * Remove now needless __ide_dma_check() wrapper and symbol export. * Check drive->autodma instead of hwif->autodma (there should be no changes in behavior as all users of config_drive_for_dma() set both ->autodma flags). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20ide-cris: fix ->set_pio_mode method to set transfer mode on the deviceBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20ide: fix hidden dependencies on CONFIG_IDE_GENERICBartlomiej Zolnierkiewicz
Some host drivers depend on CONFIG_IDE_GENERIC to do the probing but their config options lack explicit dependencies on IDE_GENERIC. In the long-term these host drivers should be fixed to do the probing themselves but for now fix them by making their config options select CONFIG_IDE_GENERIC. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20ide: make CONFIG_IDE_GENERIC default to NTejun Heo
These days, CONFIG_IDE_GENERIC causes more confusion and misconfiguration than it helps. Especially so because libata is linked after the generic driver. Default to N. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: "P.C.Chan" <pc.chan@alcatel-lucent.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-20V4L/DVB (6028): Turn an unnecessary mdelay() into msleep().Marcelo Tosatti
Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (6027): Get rid of an ill-behaved msleep in i2c writeJonathan Corbet
Configuring the OLPC camera requires something over 150 register writes. Unfortunately, querying the CAFE i2c controller too soon after a write causes the hardware to flake. The problem had been "solved" with an msleep() call, but, between the number of registers and how msleep() behaves, that resulted in a 3-second delay on camera initialization. Instead, we hand-code a wait for the completion interrupt which avoids reading the status registers. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (6026): Avoid powering up the camera on resumeChris Ball
Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5991): dvb-pll: Set minimum and maximum frequency properlyTrent Piepho
The tuner maximum frequency wasn't being set, while the minimum frequency was set to what the maximum should have been. If a future patch were to enforce these limits, dvb-pll would be effectively broken. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5969): ivtv: report ivtv version in status logHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20V4L/DVB (5967): ivtv: fix VIDIOC_S_FBUF:new OSD values where never setHans Verkuil
ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set. The values set with VIDIOC_S_FBUF were not actually used until the next VIDIOC_S_FMT. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-19KVM: Avoid calling smp_call_function_single() with interrupts disabledAvi Kivity
When taking a cpu down, we need to hardware_disable() it. Unfortunately, the CPU_DYING notifier is called with interrupts disabled, which means we can't use smp_call_function_single(). Fortunately, the CPU_DYING notifier is always called on the dying cpu, so we don't need to use the function at all and can simply call hardware_disable() directly. Tested-by: Paolo Ornati <ornati@fastwebnet.it> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4549/1: KS8695: Fix build errors [ARM] 4546/1: s3c2410: fix architecture typo for s3c2442 [ARM] 4544/1: arm: fix section mismatch in pxa fb
2007-08-18fix random hang in forcedeth driver when using netconsoleTimo Jantunen
If the forcedeth driver receives too much work in an interrupt, it assumes it has a broken hardware with stuck IRQ. It works around the problem by disabling interrupts on the nic but makes a printk while holding device spinlog - which isn't smart thing to do if you have netconsole on the same nic. This patch moves the printk's out of the spinlock protected area. Without this patch the machine hangs hard. With this patch everything still works even when there is significant increase on CPU usage while using the nic. Signed-off-by: Timo Jantunen <jeti@iki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Add some help texts to recently-introduced kconfig itemsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Enable partitions for lguest block deviceRusty Russell
The lguest block device only requests one minor, which means partitions don't work (eg "root=/dev/lgba1"). Let's follow the crowd and ask for 16. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-18Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (smsc47m1) restore missing name attribute hwmon: (w83627ehf) don't assume bank 0 hwmon: (w83627ehf) read fan_div values during probe hwmon: fix w83781d temp sensor type setting
2007-08-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Incorrect semicolon after if statement mlx4_core: Wait 1 second after reset before accessing device IPoIB: Fix leak in ipoib_transport_dev_init() error path IB/mlx4: Fix opcode returned in RDMA read completion IB/srp: Add OUI for new Cisco targets IB/srp: Wrap OUI checking for workarounds in helper functions RDMA/cxgb3: Always call low level send function via cxgb3_ofld_send() IB: Move the macro IB_UMEM_MAX_PAGE_CHUNK() to umem.c IB: Include <linux/list.h> and <linux/rwsem.h> from <rdma/ib_verbs.h> IB: Include <linux/list.h> from <rdma/ib_mad.h> IB/mad: Fix address handle leak in mad_rmpp IB/mad: agent_send_response() should be void IB/mad: Fix memory leak in switch handling in ib_mad_recv_done_handler() IB/mad: Fix error path if response alloc fails in ib_mad_recv_done_handler() IB/sa: Don't need to check for default P_Key twice IB/core: Ignore membership bit in ib_find_pkey()
2007-08-18Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPv6]: Invalid semicolon after if statement [NET]: Fix unbalanced rcu_read_unlock in __sock_create [VLAN] net/8021q/vlanproc.c: fix check-after-use [NET]: Unexport dev_ethtool [IOAT]: Remove redundant struct member to avoid descriptor cache miss [ECONET]: remove econet_packet_type on unload [AX25]: don't free pointers to statically allocated data [PATCH] mac80211: probe for hidden SSIDs in pre-auth scan [PATCH] mac80211: fix tx status frame code [BRIDGE]: Fix typo in net/bridge/br_stp_if.c [BRIDGE]: sysfs locking fix. [NETFILTER]: nf_nat_sip: don't drop short packets [NETFILTER]: nf_conntrack_sip: fix SIP-URI parsing [NETFILTER]: nf_conntrack_sip: check sname != NULL before calling strncmp [NETFILTER]: netfilter: xt_u32 bug correction
2007-08-15IB/mlx4: Incorrect semicolon after if statementIlpo Järvinen
A stray semicolon makes us inadvertently ignore the value of err. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-15libata: adjust libata to ignore errors after spinupRyan Power
Adjust libata to ignore errors after spinup This patch is to ignore errors from the spinup attempt if the drive is in the "standby id" state. Signed-off-by: Ryan Power <rpower@sysreset.com> Acked-by: Mark Lord <liml@rtr.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15ata_piix: add TECRA M7 to broken suspend listTejun Heo
Add TECRA M7 to broken suspend list. Reported by Marie Koreen. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Marie Koreen <kbug@koreen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15pata_hpt{37x|3x2n}: fix clock reporting (take 2)Sergei Shtylyov
Fix several inconsistencies in these drivers WRT reporting the clocks: - when using DPLL mode, 'pata_hpt37x' driver reported the DPLL frequency as the PCI clock -- make it properly report both clocks and add the same ability to the 'pata_hpt3x2n' driver; - both drivers sometimes use "pata_hpt3*:" and sometimes "hpt3*:" in the messages -- make them use only the former one; - the message about failed DPLL stablizatios deserves KERN_ERR and a bang. :-) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)Sergei Shtylyov
The DPLL tuning code always set up it for 66 MHz due to wrong UltraDMA mask including mode 5 used to check for the necessity of 66 MHz clocking -- this caused 66 MHz clock to be used for HPT374 chip that does not tolerate it. While fixing this, also remove PLL mode from the TODO list -- I don't think it's still a relevant item. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]Bartlomiej Zolnierkiewicz
Maximum supported UDMA mode for AEC6280[R] is UDMA5 (not UDMA4) and for AEC6880[R] it is UDMA6 (not UDMA5): * Fix the problem by adding missing struct ata_port_info to artop_init_one(). * Use the right naming (s/626/628/). * Bump driver version. Fixes IDE->libata regression, problem was never present in IDE aec62xx driver. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15ata_piix: update map 10b for ich8mTejun Heo
Fix map entry 10b for ich8. It's [P0 P2 IDE IDE] like ich6 / ich6m. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: <Kristen Carlson Accardi> kristen.c.accardi@intel.com Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15sata_mv: PCI IDs for Hightpoint RocketRaid 1740/1742Alan Cox
Underneath all the HPT packaging, PCI identifiers, binary driver modules and stuff you find that ... Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15[libata] pata_isapnp: replace missing module device tableJeff Garzik
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-14[IOAT]: Remove redundant struct member to avoid descriptor cache missShannon Nelson
The layout for struct ioat_desc_sw is non-optimal and causes an extra cache hit for every descriptor processed. By tightening up the struct layout and removing one item, we pull in the fields that get used in the speedpath and get a little better performance. Before: ------- struct ioat_desc_sw { struct ioat_dma_descriptor * hw; /* 0 8 */ struct list_head node; /* 8 16 */ int tx_cnt; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ dma_addr_t src; /* 32 8 */ __u32 src_len; /* 40 4 */ /* XXX 4 bytes hole, try to pack */ dma_addr_t dst; /* 48 8 */ __u32 dst_len; /* 56 4 */ /* XXX 4 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ struct dma_async_tx_descriptor async_tx; /* 64 144 */ /* --- cacheline 3 boundary (192 bytes) was 16 bytes ago --- */ /* size: 208, cachelines: 4 */ /* sum members: 196, holes: 3, sum holes: 12 */ /* last cacheline: 16 bytes */ }; /* definitions: 1 */ After: ------ struct ioat_desc_sw { struct ioat_dma_descriptor * hw; /* 0 8 */ struct list_head node; /* 8 16 */ int tx_cnt; /* 24 4 */ __u32 len; /* 28 4 */ dma_addr_t src; /* 32 8 */ dma_addr_t dst; /* 40 8 */ struct dma_async_tx_descriptor async_tx; /* 48 144 */ /* --- cacheline 3 boundary (192 bytes) --- */ /* size: 192, cachelines: 3 */ }; /* definitions: 1 */ Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-14Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-s3c2410: Build fix i2c/menelaus: Build fix i2c-mv64xxx: Reinitialize hw and driver on I2C bus hang i2c-mpc: Don't disable I2C module on stop condition i2c-iop3xx: Set I2C_CLASS_HWMON to adapter class i2c/isp1301_omap: Build fixes, whitespace i2c-mpc: Pass correct dev_id to free_irq on error path i2c-i801: Typo: erroneous
2007-08-14i2c-s3c2410: Build fixBen Dooks
Fixup the include files after the arch moves that where included in 2.6.23. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c/menelaus: Build fixDavid Brownell
Fix Menelaus build error, and remove needless "#define DEBUG". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-mv64xxx: Reinitialize hw and driver on I2C bus hangDale Farnsworth
Under certain conditions, the mv64xxx I2C bus can hang preventing further operation. To make the driver more robust, we now reset the I2C hardware and the driver state machine when such hangs are detected. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-mpc: Don't disable I2C module on stop conditionDomen Puncer
Disabling module on stop doesn't work on some CPUs (ie. mpc8241, as reported by Guennadi Liakhovetski), so remove that. Disable I2C module on errors/interrupts to prevent it from locking up on mpc5200b. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-iop3xx: Set I2C_CLASS_HWMON to adapter classArnaud Patard
In order to be able to use sensors on the IOP3xx SoCs, one needs to set the adapter class to I2C_CLASS_HWMON. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c/isp1301_omap: Build fixes, whitespaceDavid Brownell
Build fixes for isp1301_omap driver. I think an earlier version of this must have gotten lost somewhere, or maybe it only went into the Linux-OMAP tree. Also, some whitespace fixes to bring this more into sync with the version of this found in the Linux-OMAP tree. (That version has updates for the OTG controller on the OMAP 1710 which break that functionality on OMAP 161x boards like the H2, so merging all of it is not currently an option.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-mpc: Pass correct dev_id to free_irq on error pathScott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14i2c-i801: Typo: erroneousJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-08-14Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPVS]: Use IP_VS_WAIT_WHILE when encessary. [NET]: Share correct feature code between bridging and bonding [ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc [IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]alloc [WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzalloc [DCCP]: fix memory leak and clean up style - dccp_feat_empty_confirm() [DCCP]: fix theoretical ccids_{read,write}_lock() race [XFRM]: Clean up duplicate includes in net/xfrm/ [TIPC]: Clean up duplicate includes in net/tipc/ [SUNRPC]: Clean up duplicate includes in net/sunrpc/ [PKT_SCHED]: Clean up duplicate includes in net/sched/ [IPV6]: Clean up duplicate includes in net/ipv6/ [IPV4]: Clean up duplicate includes in net/ipv4/ [ATM]: Clean up duplicate includes in net/atm/ [ATM]: Clean up duplicate includes in drivers/atm/ [IPCONFIG]: ip_auto_config fix [ATM]: fore200e_param_bs_queue() must be __devinit
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-10 13:11:10 +0000