| Age | Commit message (Collapse) | Author |
|---|
|
This adds an appropriate ac power_supply class and shows usb only when
at the appropriate current limit.
Signed-off-by: Sean McNeil <sean@mcneil.com>
|
|
c2410_ts-pat
pending-tracking-hist top was MERGE-via-stable-tracking-add-skip_filter-s3c2410_ts-pat / 90805b15390b2c9a56c31eb9722a9704a88c1ad7 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-add-skip_filter-s3c2410_ts-pat
stable-tracking-hist top was add-skip_filter-s3c2410_ts-pat / d1ee2301175bf55df550fb310b0701645e07e5dd ... parent commitmessage:
From: Nelson Castillo <nelsoneci@gmail.com>
add-skip_filter-s3c2410_ts.patch
Skip filter for touchscreen values.
Problem: The first and the last sample might be unreliable. We provide
this filter as a separate function in order to keep the event_send_timer_f
function simple. This filter:
* Skips NHEAD points after IE_DOWN
* Skips NTAIL points before IE_UP
* Ignores a click if we have less than (NHEAD + NTAIL + 1) points
Right now the filter is embedded in the driver. We have two #defines with
the parameters SKIP_NHEAD and SKIP_NTAIL. I didn't store their values in
struct skip_filter on purpose.
Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
|
|
Now the card is powered when we send the last command from the stack,
SELECT CARD with arg 0, we learn that the card can't reply when
deselected. So detect SELECT CARD and arg 0 and don't bother waiting
for an ack that isn't coming. This chops three seconds off suspend :-)
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Nothing on the card can really take 3s.. reduce to 300ms
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Now Qi is changed to default to loglevel 4 where it will show KERN_ERR on
LCM, we need to reduce the debugging KERN_ERR traffic so as not to
obscure the real things.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
The gratuitous IRQ clearing thing had some problems... the workqueue was
going to put the device and enable the irq...
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
patch
pending-tracking-hist top was MERGE-via-stable-tracking-clean-hif-warning-patch / b8c3cb615a862e2a2167127195ffbd7ff18113dd ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-clean-hif-warning-patch
stable-tracking-hist top was clean-hif-warning-patch / 37b07c166a3bcc91a2ded54daa14412fbfb7cfd0 ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
clean-hif-warning.patch
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
_filter_medi
pending-tracking-hist top was MERGE-via-stable-tracking-fix-last_issued-ts_filter_medi / 404664ee400e5a47f66a4dce9427f3fd4ae22d38 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-fix-last_issued-ts_filter_medi
stable-tracking-hist top was fix-last_issued-ts_filter_medi / 80f4b57fef5dcffbb1d93fa43432952c168860ed ... parent commitmessage:
From: Nelson Castillo <nelsoneci@gmail.com>
fix-last_issued-ts_filter_median.patch
- Decimation_below was not being used in the median filter. Fixed.
- Decimation_below should be small. There's no need to change many
points in the median filter if we're moving slow. In this way we
will filter more noise.
- Now we deliver 2X input events -- 1 each 5 milliseconds.
(side effect of the previous two changes)
- We should omit the last point before the UP event but I think this
belongs to user-space. I'm programming a tslib filter ("skip") and
if it doesn't work will I'll send a patch later to skip the last
point in the driver.
Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
|
|
hort-clicks-s3c24
pending-tracking-hist top was MERGE-via-stable-tracking-hist-ignore-very-short-clicks-s3c24 / 8e8a39f8d43430ae4543b6d13b1626bd8b913881 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-ignore-very-short-clicks-s3c24
stable-tracking-hist top was ignore-very-short-clicks-s3c24 / aa3d2f306e4ca5b04a01ca3ad635caae1c1e8e33 ... parent commitmessage:
From: Nelson Castillo <nelsoneci@gmail.com>
ignore-very-short-clicks-s3c2410_ts.patch
With this patch the issue of the noisy clicks seems to be
alleviated. We ignore the first two points. If a click has less
than 3 points we ignore it.
On a normal click (I mean with at least 3 points) this patch
will delay the first DOWN event by 20 milliseconds.
I'm looking for a better solution but this one works and it should
make the driver more usable.
Signed-off-by: Nelson Castillo <nelsoneci@gmail.com>
|
|
change the IRQ type of pcf50633 (to LEVEL)
|
|
plevel-patch
balaji-tracking-hist top was MERGE-via-stable-tracking-hist-config-gta02-uplevel-patch / eb381acecca375d0a7b88cfe640504a8a1fa4c39 ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-config-gta02-uplevel-patch
stable-tracking-hist top was config-gta02-uplevel-patch / 0e07e39074bbdb938cfefaea6ad7823282cc914c ... parent commitmessage:
From: Andy Green <andy@openmoko.com>
config-gta02-uplevel.patch
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
n-insane-allocat
balaji-tracking-hist top was MERGE-via-stable-tracking-hist-ar6k-break-down-insane-allocat / 6a9c6db399ca60d371ec6b42986608e8bc4a636f ... parent commitmessage:
From: merge <null@invalid>
MERGE-via-stable-tracking-hist-ar6k-break-down-insane-allocat
stable-tracking-hist top was ar6k-break-down-insane-allocat / ac6b4c5fae9b497401eeb3e47cc21932839c18a2 ... parent commitmessage:
From: Werner Almesberger <werner@openmoko.org>
ar6k-break-down-insane-allocation.patch
The Atheros WLAN stack kmallocs almost 64kB of contiguous kernel
memory for a structure containing almost entirely buffers.
As is commonly known , this kind of large allocation has a very
high risk of failing as kernel memory fragments during the life of
a system.
This patch allocates the buffers indiviudually, thus shrinking the
structure to a size below 4kB.
Note: this is untested. These buffers are only used with Atheros'
raw interface, which none of the code we have, including wmiconfig,
even seems to know about.
This may fix bug #2133. Code follows Atheros' style, so checkpatch
hates it.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
patches-tracking-via-master-s3c-hsmmc-clean
balaji-tracking-hist top was efb2d57c0e0ed62324d79d6c5793fe797c157266
|
|
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This patch adds a single file that is intended to do the job of
the several neo1973_pm_* drivers used in GTA02. It exposes the
/sys nodes
/sys/bus/platform/devices/om-gta03.0/gps_power
/sys/bus/platform/devices/om-gta03.0/gsm_power
/sys/bus/platform/devices/om-gta03.0/usbhost_power
/sys/bus/platform/devices/om-gta03.0/wlan_bt_power
at the moment which allow power control of these subsystems.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add the observed vid, pid and model numbers for Marvell 88W8688
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Changes related to pcf50633_mfd.patch
|
|
pcf50633 driver rewritten to use the MFD model.
|
|
Move the RTC subdevice driver into drivers/rtc/rtc-pcf50633.c
|
|
Introduces pcf50633_read and pcf50633_write for reading a block of
registers. Assumes mutex held by caller.
|
|
We don't need to save state when we suspend as we don't put the PMU to
standby.
This improves the 'resume devices' time from 1.175s to 1.135 sec!
|
|
1. Removes pmu_voltage_rails stuff and replaces it with regulator_init_data[]
2. Removes voltage_ldoX and other /sys attributes.
3. Introduces s3c2410_pm_begin method to call regulator_suspend_prepare()
|
|
Changes the glamo-mci driver to use the regulator API.
|
|
Move backlight support out of pcf50633 driver. backlight
support now uses corgibl aka generic backlight support.
Set
CONFIG_BACKLIGHT_CORGI=y to use it.
|
|
Improves ADC access interface in pcf50633 driver.
|
|
Specify regulator constraints for gta02. For now, constraints for only
the current used devices are specified.
|
|
Modify pcf50633 driver to use the new regulator API.
|
|
Eliminate pcf50633_global and hence make pcf50633.c work with
multiple devices. pcf50633 is no longer a paltform device, but
an i2c device.
|
|
Setup interrupt latching for thresholded operation
From: Simon Kagstrom <simon.kagstrom@gmail.com>
This patch, for stable-tracking, sets up interrupt latching for
thresholded operation, and also acks the interrupt in the handler. This
reduces the interrupt load, and thresholds < 36 are once again allowed
(though not of much use).
The patch also fixes some warnings in the code (including a potential
bug).
Thanks to Werner for pointing this out!
Signed-off-by: Simon Kagstrom <simon.kagstrom@gmail.com>
|
|
When compiling s3cmci as a module and doing an insmod-rmmod-insmod
sequence, s3cmci_probe often oopses because the platform data contains
garbage.
The reason for this is that I'm not providing any platform data (removed
in gta02-mmc-mci.patch), and thus s3cmci tries to put its own defaults:
if (!host->pdata) {
pdev->dev.platform_data = &s3cmci_def_pdata;
host->pdata = &s3cmci_def_pdata;
}
s3cmci_def_pdata is inside the module, so the pointer in
pdev->dev.platform_data becomes invalid after the module is unloaded.
Since nothing else in s3cmci uses pdev->dev.platform_data, "patching"
it seems unnecessary. This patch removes it.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
Oops ! It compiled file as non-module, but not as module.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
This patch adds the module parameter f_max to s3cmci to limit the
maximum clock frequency of the SD interface.
E.g., when booting with s3cmci.f_max=10000000, the kernel should say
s3c2440-sdi s3c2440-sdi: f_max lowered from 50000000 to 10000000 Hz
and the interface frequency should be limited accordingly.
Setting the limit above the maximum frequency supported by the card
or the interface has no effect, so the option is ignored (and no
"f_max lowered" line is printed).
Setting the limit below the minimum frequency supported by the
interface sets it to that frequency.
Signed-off-by: Werner Almesberger <werner@openmoko.org>
|
|
This solves the problem that the backlight never turns off
in stable-tracking
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Merge in the accelerometer functionality from stable
From: Simon Kagstrom <simon.kagstrom@gmail.com>
This giant patch merges the functionality from stable. It also changes
the default threshold to 0 (generate interrupts on data). As the
level-triggered interrupts cause too frequent interruptions on low
thresholds, also set a lower limit to 36mg to avoid slowing down the
phone too much.
Also rearrange the probe function to disable interrupts only over device
I/O. This fixes the kernel errors when inserting the module.
Andy was right: In stable-tracking, no magic workaround is needed to
make suspend/resume work. I've tested the accelerometers under heavy
load (making the phone basically unusable) without getting lockups.
Signed-off-by: Simon Kagstrom <simon.kagstrom@gmail.com>
|
|
Work in progress.
|
