aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-06-18[ARM] 3406/1: lpd7x: compilation fix for smc91xMarc Singer
Patch from Marc Singer Reworking of the adaptation macros to allow driver to compile again for the lpd7x's. Also, support added for the lh79520 so it may use the smc91x. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3404/1: lpd7a40x: AMBA CLCD supportMarc Singer
Patch from Marc Singer Board support and LCD panel configurations to integrate lh7a40x's with the amba clcd driver. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3402/1: lpd7a40x: serial driver bug fixMarc Singer
Patch from Marc Singer The serial driver now sets up the third UART when it is to be used. Signed-off-by: Marc Singer <elf@buici.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-17[PATCH] sky2: netconsole suspend/resume interactionStephen Hemminger
A couple of fixes that should prevent crashes when using netconsole and suspend/resume. First, netconsole poll routine shouldn't run unless the device is up; second, the NAPI poll should be disabled during suspend. This is only an issue on sky2, because it has to have one NAPI poll routine for both ports on dual port boards. Normal drivers use netif_rx_schedule_prep and that checks for netif_running. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-17[PATCH] fix cdrom openJens Axboe
Some time ago the cdrom open routine was changed so that we call the driver's open routine before checking to see if it is read only. However, if we discovered that a read write open was not possible and the open flags required a writable open, we just returned -EROFS without calling the driver's release routine. This seems to work for most cdrom drivers, but breaks the Powerpc iSeries virtual cdrom rather badly. This just inserts the release call in the error path to balance the call to "->open()" done by "open_for_data()". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: stop/start hardware idle timer on suspend/resumeStephen Hemminger
The resume bug was caused not by an early interrupt but because the idle timeout was not being stopped on suspend. Also disable hardware IRQ's on suspend. Will need to revisit this with hotplug? Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: save/restore base hardware irq during suspend/resumeStephen Hemminger
The hardware should be fully shut off during suspend, and the base irq mask restored during resume. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: fix hotplug detect during pollStephen Hemminger
If the poll routine detects no hardware available, it needs to dequeue it self from the network poll list. Linus didn't understand NAPI. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: don't hard code number of portsStephen Hemminger
It is cleaner, to not loop over both ports if only one exists. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-13[PATCH] sky2: set_power_state should be voidStephen Hemminger
The set power state function is cleaner if it doesn't return anything. The only caller that could fail is in suspend() and it can check the argument there. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix Integrator and Versatile interrupt initialisation [ARM] 3546/1: PATCH: subtle lost interrupts bug on i.MX [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget [ARM] Fix Neponset IRQ handling
2006-06-12[sky2] Fix sky2 network driver suspend/resumeLinus Torvalds
This fixes two independent problems: it would not save the PCI state on suspend (and thus try to resume a nonexistent state on resume), and while shut off, if an interrupt happened on the same shared irq, the irq handler would react very badly to the interrupt status being an invalid all-ones state. Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-12Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] sata_mv: grab host lock inside eng_timeout
2006-06-11[PATCH] Fix for the PPTP hangs that have been reportedPaul Mackerras
People have been reporting that PPP connections over ptys, such as used with PPTP, will hang randomly when transferring large amounts of data, for instance in http://bugzilla.kernel.org/show_bug.cgi?id=6530. I have managed to reproduce the problem, and the patch below fixes the actual cause. The problem is not in fact in ppp_async.c but in n_tty.c. What happens is that when pptp reads from the pty, we call read_chan() in drivers/char/n_tty.c on the master side of the pty. That copies all the characters out of its buffer to userspace and then calls check_unthrottle(), which calls the pty unthrottle routine, which calls tty_wakeup on the slave side, which calls ppp_asynctty_wakeup, which calls tasklet_schedule. So far so good. Since we are in process context, the tasklet runs immediately and calls ppp_async_process(), which calls ppp_async_push, which calls the tty->driver->write function to send some more output. However, tty->driver->write() returns zero, because the master tty->receive_room is still zero. We haven't returned from check_unthrottle() yet, and read_chan() only updates tty->receive_room _after_ calling check_unthrottle. That means that the driver->write call in ppp_async_process() returns 0. That would be fine if we were going to get a subsequent wakeup call, but we aren't (we just had it, and the buffer is now empty). The solution is for n_tty.c to update tty->receive_room _before_ calling the driver unthrottle routine. The patch below does this. With this patch I was able to transfer a 900MB file over a PPTP connection (taking about 25 minutes), whereas without the patch the connection would always stall in under a minute. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-11[PATCH] sata_mv: grab host lock inside eng_timeoutMark Lord
Bug fix: mv_eng_timeout() calls mv_err_intr() without first grabbing the host lock, which can lead to all sorts of interesting scenarios. This whole error-handling portion of sata_mv is nasty (and will get fixed for the new EH stuff), but for now this patch will help keep it on life-support. Signed-off-by: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11[PATCH] PCI: reverse pci config space restore orderYu, Luming
According to Intel ICH spec, there are several rules that Base Address should be programmed before IOSE (PCICMD register ) enabled. For example ICH7: 12.1.3 SATA : the base address register for the bus master register should be programmed before this bit is set. 11.1.3: PCICMD (USB): The base address register for USB should be programmed before this bit is set. .... To make sure kernel code follow this rule , and prevent unnecessary confusion. I proposal this patch. Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-11[PATCH] PCI: Improve PCI config space writebackDave Jones
At least one laptop blew up on resume from suspend with a black screen due to a lack of this patch. By only writing back config space that is different, we minimise the possibility of accidents like this. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-11[PATCH] PCI: Error handling on PCI device resumeJean Delvare
We currently don't handle errors properly when resuming a PCI device: * In pci_default_resume() we capture the error code returned by pci_enable_device() but don't pass it up to the caller. Introduced by commit 95a629657dbe28e44a312c47815b3dc3f1ce0970 * In pci_resume_device(), the errors possibly returned by the driver's .resume method or by the generic pci_default_resume() function are ignored. This patch fixes both issues. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-10Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Avoid JBUS errors on some Niagara systems. [FUSION]: Fix mptspi.c build with CONFIG_PM not set. [TG3]: Handle Sun onboard tg3 chips more correctly. [SPARC64]: Dump local cpu registers in sun4v_log_error()
2006-06-10[PATCH] powerpc: console_initcall ordering issuesMilton Miller
From: Milton Miller <miltonm@bga.com> The add_preferred_console call in rtas_console.c was not causing the console to be selected. It turns out that the add_preferred_console was being called after the hvc_console driver was registered. It only works when it is called before the console driver is registered. Reorder hvc_console.o after the hvc_console drivers to allow the selection during console_initcall processing. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10[PATCH] I2O: Bugfixes to get I2O working againMarkus Lidel
From: Markus Lidel <Markus.Lidel@shadowconnect.com> - Fixed locking of struct i2o_exec_wait in Executive-OSM - Removed LCT Notify in i2o_exec_probe() which caused freeing memory and accessing freed memory during first enumeration of I2O devices - Added missing locking in i2o_exec_lct_notify() - removed put_device() of I2O controller in i2o_iop_remove() which caused the controller structure get freed to early - Fixed size of mempool in i2o_iop_alloc() - Fixed access to freed memory in i2o_msg_get() See http://bugzilla.kernel.org/show_bug.cgi?id=6561 Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-10[PATCH] powernow-k8 crash workaroundAndrew Morton
From: Andrew Morton <akpm@osdl.org> Work around the oops reported in http://bugzilla.kernel.org/show_bug.cgi?id=6478. Thanks to Ralf Hildebrandt <ralf.hildebrandt@charite.de> for testing and reporting. Acked-by: Dave Jones <davej@codemonkey.org.uk> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-09[FUSION]: Fix mptspi.c build with CONFIG_PM not set.Tom "spot" Callaway
Signed-off-by: Tom "spot" Callaway <tcallawa@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09[TG3]: Handle Sun onboard tg3 chips more correctly.David S. Miller
Get rid of all the SUN_570X logic and instead: 1) Make sure MEMARB_ENABLE is set when we probe the SRAM for config information. If that is off we will get timeouts. 2) Always try to sync with the firmware, if there is no firmware running do not treat it as an error and instead just report it the first time we notice this condition. 3) If there is no valid SRAM signature, assume the device is onboard by setting TG3_FLAG_EEPROM_WRITE_PROT. Update driver version and release date. With help from Michael Chan and Fabio Massimo Di Nitto. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-08Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: e1000: remove risky prefetch on next_skb->data e1000: fix ethtool test irq alloc as "probe" [PATCH] bcm43xx: add DMA rx poll workaround to DMA4
2006-06-08[PATCH] fbcon: fix limited scroll in SCROLL_PAN_REDRAW modeMalcom Parsons
From: Malcom Parsons <malcolm.parsons@gmail.com> When scrolling up in SCROLL_PAN_REDRAW mode with a large limited scroll region, the bottom few lines have to be redrawn. Without this patch, the wrong text is drawn into these lines, corrupting the display. Observed in 2.6.14 when running an IRC client in the Nintendo DS linux port. I haven't tested if scrolling down has the same problem. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-08[ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budgetRichard Purdie
Patch from Richard Purdie Add a power budget variable to the PXA OHCI platform data and add a default value for the spitz platform(s) which prevents known failures with certain USB devices. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-08Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream-fixes
2006-06-08Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2006-06-08e1000: remove risky prefetch on next_skb->dataAuke Kok
It was brought to our attention that the prefetches break e1000 traffic on xscale/arm architectures. Remove them for now. We'll let them stay in mm for a while, or find a better solution to enable. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-08e1000: fix ethtool test irq alloc as "probe"Auke Kok
New code added in 2.6.17 caused setup_irq to print a warning when running ethtool -t eth0 offline. This test marks the request_irq call made by this test as a "probe" to see if the interrupt is shared or not. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-06-05Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: fix locking and memory leak in br_add_bridge [IRDA]: Missing allocation result check in irlap_change_speed(). [PPPOE]: Missing result check in __pppoe_xmit(). [NET]: Eliminate unused /proc/sys/net/ethernet [NETCONSOLE]: Clean up initcall warning. [TCP]: Avoid skb_pull if possible when trimming head
2006-06-05Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Prevent au1xmmc.c breakage on non-Au1200 Alchemy [MMC] Add maintainers entry for MMC subsystem
2006-06-05[PPPOE]: Missing result check in __pppoe_xmit().Florin Malita
skb_clone() may fail, we should check the result. Coverity CID: 1215. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-05[NETCONSOLE]: Clean up initcall warning.Matt Mackall
From: Matt Mackall <mpm@selenic.com> netconsole is being wrong here. If it wasn't enabled there's no error. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-05Merge master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6: [PATCH] pcmcia: fix zeroing of cm4000_cs.c data [PATCH] pcmcia: missing pcmcia_get_socket() result check
2006-06-05[PATCH] m48t86: ia64 build fixAndrew Morton
From: Andrew Morton <akpm@osdl.org> drivers/rtc/rtc-m48t86.c: In function `m48t86_rtc_read_time': drivers/rtc/rtc-m48t86.c:51: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:55: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:56: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:57: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:58: error: structure has no member named `ia64_mv' drivers/rtc/rtc-m48t86.c:60: error: structure has no member named `ia64_mv' readb() and writeb() are macros on ia64. Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] sata_sil24: SII3124 sata driver endian problemRune Torgersen
From: "Rune Torgersen" <runet@innovsys.com> Fix an endian issue in the sil24 driver. Signed-off-by: Rune Torgersen <runet@innovsys.com> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] sbp2: fix check of return value of ↵Stefan Richter
hpsb_allocate_and_register_addrspace() From: Stefan Richter <stefanr@s5r6.in-berlin.de> I added a failure check in patch "sbp2: variable status FIFO address (fix login timeout)" --- alas for a wrong error value. This is a bug since Linux 2.6.16. Leads to NULL pointer dereference if the call failed, and bogus failure handling if call succeeded. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org> Cc: Ben Collins <bcollins@debian.org> Cc: Jody McIntyre <scjody@modernduck.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] Implement get / set tso for forcedeth driverZachary Amsden
From: Zachary Amsden <zach@vmware.com> Signed-off-by: Zachary Amsden <zach@vmware.com> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] s390: cio non-unique path group idsPeter Oberparleiter
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> The path grouping can fail due to non-unique pathgroup-IDs. The source for the CPU-ID part of the ID was incorrectly specified on 64 bit systems. Additionally, the length of the ID was too large due to incorrect data packing declaration. Fix CPU-ID lowcore address and add missing packing declaration. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] s390: irb memcpy argument swapCornelia Huck
From: Cornelia Huck <cornelia.huck@de.ibm.com> Swapped memcpy arguments in ccw_device_irq() when doing basic sense after unsolicited interrupt. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] nmclan_cs: dereferencing skb after netif_rx()Florin Malita
From: Florin Malita <fmalita@gmail.com> The skb may be gone after netif_rx(), we can't use 'skb->len' to update the stats. 'pkt_len' should work instead. Coverity CID: 911. Signed-off-by: Florin Malita <fmalita@gmail.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-05[PATCH] bcm43xx: add DMA rx poll workaround to DMA4Michael Buesch
Also add the Poll RX DMA Memory workaround to the DMA4 (xmitstatus) path. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-06-05IPoIB: Fix AH leak at interface downEli Cohen
When ipoib_stop() is called it first calls netif_stop_queue() to stop the kernel from passing more packets to the network driver. However, the completion handler may call netif_wake_queue() re-enabling packet transfer. This might result in leaks (we see AH leaks which we think can be attributed to this bug) as new packets get posted while the interface is going down. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Michael Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-04[MMC] Prevent au1xmmc.c breakage on non-Au1200 AlchemyRalf Baechle
The driver is selectable on other than Au1200 Alchemy systems but won't build nor work - there is no MMC hw. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-03Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_lib.c: properly count the number of pages in scsi_req_map_sg() [SCSI] scsi_transport_sas: make write attrs writeable [SCSI] scsi_transport_sas; fix user_scan [SCSI] ppa: fix for machines with highmem [SCSI] mptspi: reset handler shouldn't be called for other bus protocols [SCSI] Blacklist entry for HP dat changer
2006-06-02[PATCH] pcmcia: fix zeroing of cm4000_cs.c dataDominik Brodowski
Fix the incorrect calculation of how much to zero out in struct cm4000_dev on device initialization. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-06-02[PATCH] pcmcia: missing pcmcia_get_socket() result checkFlorin Malita
The result of pcmcia_get_socket() may be NULL but ds_event() uses it without checking. Coverity CID: 436. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-06-01[SCSI] scsi_lib.c: properly count the number of pages in scsi_req_map_sg()Bryan Holty
The calculation of nr_pages in scsi_req_map_sg() doesn't account for the fact that the first page could have an offset that pushes the end of the buffer onto a new page. Signed-off-by: Bryan Holty <lgeek@frontiernet.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>