aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-10-12sdio: high-speed supportPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: hard code 512 byte block sizePierre Ossman
We use 512 byte blocks on all cards, and newer cards support nothing else, so hard code it and make the code less complex. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: force high speed capability on some controllersPierre Ossman
Some high speed capable controllers forget to set the high speed capability bit. Make sure we enable the functionality anyway. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: filter out PC requestsPierre Ossman
We do not support PC (SCSI) commands, so don't pretend we do by letting them through. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: indicate strict orderingPierre Ossman
The MMC block driver services requests one at a time and in strict order. Indicate this to the block layer so that it can handle barriers in an efficient manner. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12mmc_block: inform block layer about sector count restrictionPierre Ossman
Make sure we consider the maximum block count when we tell the block layer about the maximum sector count. That way we don't have to chop up the request ourselves. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdio: give sdio irq thread a host specific namePierre Ossman
There is one thread per host controller so make sure they all get unique names. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdio: make sleep on error interruptablePierre Ossman
Make sure we can be woken from the forced sleep that is done on errors. Removing a card often results in -ENOMEDIUM or -EILSEQ so we previously locked up the removal process for a second. We could completely exit on -ENOMEDIUM, but it might be a transient glitch so treat it like any other error. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: reduce card detection delayPierre Ossman
The card detection delay was added early when the behaviour of the card interrupt was still very much unknown (i.e. before there was a public specification). As it is now known that it is a debounced signal, reduce the delay to something more sensible. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-12sdhci: let the controller wait for busy state to endPierre Ossman
The sdhci controllers can interrupt us when the busy state from the card has ended, saving CPU cycles and power. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-10-09hwmon: (abituguru3) Enable DMI probing feature on Abit AT8 32XAlistair John Strachan
Enable driver checking of the DMI product name (when enabled) on an Abit AT8 32X, instead of falling back to a manual probe. This eliminates false negatives and eventually will help avoid unnecessary bus probes on unsupported mainboards. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Daniel Exner <dex@dragonslave.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09hwmon: (abituguru3) Enable reading from AUX3 fan on Abit AT8 32XAlistair John Strachan
The table for the Abit AT8 32X was incorrectly missing an entry for the sixth ("AUX3") fan. Add this entry, exporting the fan reading to userspace. Closes lm-sensors.org ticket #2339. Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Tested-by: Daniel Exner <dex@dragonslave.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09hwmon: (it87) Prevent power-off on Shuttle SN68PTJean Delvare
On the Shuttle SN68PT, FAN_CTL2 is apparently not connected to a fan, but to something else. One user has reported instant system power-off when changing the PWM2 duty cycle, so we disable it. I use the board name string as the trigger in case the same board is ever used in other systems. This closes lm-sensors ticket #2349: pwmconfig causes a hard poweroff http://www.lm-sensors.org/ticket/2349 Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-09eeepc-laptop: Fix hwmon interfaceCorentin Chary
Creates a name file in the sysfs directory, that is needed for the libsensors library to work. Also rename fan1_pwm to pwm1 and scale its value as needed. This fixes bug #11520: http://bugzilla.kernel.org/show_bug.cgi?id=11520 Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tcp: Fix tcp_hybla zero congestion window growth with small rho and large cwnd. net: Fix netdev_run_todo dead-lock tcp: Fix possible double-ack w/ user dma net: only invoke dev->change_rx_flags when device is UP netrom: Fix sock_orphan() use in nr_release ax25: Quick fix for making sure unaccepted sockets get destroyed. Revert "ax25: Fix std timer socket destroy handling." [Bluetooth] Add reset quirk for A-Link BlueUSB21 dongle [Bluetooth] Add reset quirk for new Targus and Belkin dongles [Bluetooth] Fix double frees on error paths of btusb and bpa10x drivers
2008-10-07Revert "V4L/DVB (8904): cx88: add missing unlock_kernel"Linus Torvalds
This reverts commit 135aedc38e812b922aa56096f36a3d72ffbcf2fb, as requested by Hans Verkuil. It was a patch for 2.6.28 where the BKL was pushed down from v4l core to the drivers, not for 2.6.27! Requested-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: workaround for bogus gcc warning in ide_sysfs_register_port() ide-cd: Optiarc DVD RW AD-7200A does play audio IDE: Fix platform device registration in Swarm IDE driver (v2) ide-dma: fix ide_build_dmatable() for TRM290 ide-cd: temporary tray close fix
2008-10-06Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issue V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310U V4L/DVB (9092): gspca: Bad init values for sonixj ov7660. V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors. V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561. V4L/DVB (9053): fix buffer overflow in uvc-video V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflow V4L/DVB (9037): Fix support for Hauppauge Nova-S SE V4L/DVB (9029): Fix deadlock in demux code V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStick V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStick V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600 V4L/DVB (8963): s2255drv field count fix V4L/DVB (8961): zr36067: Fix RGBR pixel format V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.h V4L/DVB (8958): zr36067: Return proper bytes-per-line value V4L/DVB (8957): zr36067: Restore the default pixel format V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_open V4L/DVB (8935): em28xx-cards: Remove duplicate entry (EM2800_BOARD_KWORLD_USB2800) V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom. ...
2008-10-06atmel-mci: Initialize BLKR before sending data transfer commandHaavard Skinnemoen
The atmel-mci driver sometimes fails data transfers like this: mmcblk0: error -5 transferring data end_request: I/O error, dev mmcblk0, sector 2749769 end_request: I/O error, dev mmcblk0, sector 2749777 It turns out that this might be caused by the BLKR register (which contains the block size and the number of blocks being transfered) being initialized too late. This patch moves the initialization of BLKR so that it contains the correct value before the block transfer command is sent. This error is difficult to reproduce, but if you insert a long delay (mdelay(10) or thereabouts) between the calls to atmci_start_command() and atmci_submit_data(), all transfers seem to fail without this patch, while I haven't seen any failures with this patch. Reported-by: Hein_Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-06[Bluetooth] Add reset quirk for A-Link BlueUSB21 dongleMarcel Holtmann
The new A-Link Bluetooth dongle is another one based on the BCM2046 chip from Broadcom and it also needs to send HCI_Reset before it becomes fully operational. Without the quirk it will show a lot of I/O errors. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-10-06[Bluetooth] Add reset quirk for new Targus and Belkin donglesMarcel Holtmann
Targus and Belkin have come out with new Bluetooth 2.1 capable dongles using the latest BCM2046 chip from Broadcom. Both of them are so called HID proxy dongles and they need to send HCI_Reset before they become fully operational. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-10-06[Bluetooth] Fix double frees on error paths of btusb and bpa10x driversMarcel Holtmann
The transfer buffer of an URB will be automatically freed when using the URB_FREE_BUFFER transfer_flag. So the extra calls to kfree() will cause a double free. Reported-by: Justin Mattock <justinmattock@gmail.com> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2008-10-05ide: workaround for bogus gcc warning in ide_sysfs_register_port()Bartlomiej Zolnierkiewicz
Reported-by: "Steven Noonan" <steven@uplinklabs.net> Suggested-by: "Elias Oltmanns" <eo@nebensachen.de> Cc: mingo@elte.hu Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-cd: Optiarc DVD RW AD-7200A does play audioBodo Eggert
The Optiarc DVD RW AD-7200A can play audio, but tells it could not. Signed-off-by: Bodo Eggert <7eggert@gmx.de> Tested-by: Nick Warne <nick@ukfsn.org> Received-from: Borislav Petkov <petkovbb@googlemail.com> [bart: keep "audio" quirks together] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05IDE: Fix platform device registration in Swarm IDE driver (v2)Ralf Baechle
The Swarm IDE driver uses a release method which is defined in the driver itself thus potentially oopsable. The simple fix would be to just leak the device but this patch goes the full length and moves the entire handling of the platform device in the platform code and retains only the platform driver code in drivers/ide/mips/swarm.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-dma: fix ide_build_dmatable() for TRM290Sergei Shtylylov
Apparently, 'xcount' being 0 does not mean 0 bytes for TRM290; it means 4 bytes, judging from the code immediately preceding this check. So, we must never try to "split" the PRD for TRM290. This is probably never hit anyway -- with the DMA buffers aligned to at least 512 bytes and ATAPI DMA not being used for non block I/O commands... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05ide-cd: temporary tray close fixBorislav Petkov
This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=11602. A more generic fix for drives which cannot autoclose tray will follow. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> [bart: add an extra parentheses for consistency with the rest of kernel code] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-04V4L/DVB (9103): em28xx: HVR-900 B3C0 - fix audio clicking issueWiktor Grebla
Fixed audio clicking problem which could be heard when using analog tv or composite input Signed-off-by: Wiktor Grebla <greblus@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9099): em28xx: Add detection for K-WORLD DVB-T 310UDarron Broad
Correct firmware type to MTS Correct audio routing for composite/s-video Add DVB-T detection. This patch uses the eeprom hash method for detection as the vendor/product ids are also used for the DIGIVOX_AD. This may be a clone of the same product. Explanatory text has been added prior to the hask look-up in anticipation that it may help others. The following has been tested to work: Analogue TV (PAL-I) Composite In DVB-T (UK Crystal Palace) USB AUDIO The following has not been tested but probably works: S-Video In Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9092): gspca: Bad init values for sonixj ov7660.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9080): gspca: Add a delay after writing to the sonixj sensors.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9075): gspca: Bad check of returned status in i2c_read() spca561.Shane
This makes auto gain functional on 04fc:0561. Signed-off-by: Shane <gnome42@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9053): fix buffer overflow in uvc-videoRalph Loader
There is a buffer overflow in drivers/media/video/uvc/uvc_ctrl.c: INFO: 0xf2c5ce08-0xf2c5ce0b. First byte 0xa1 instead of 0xcc INFO: Allocated in uvc_query_v4l2_ctrl+0x3c/0x239 [uvcvideo] age=13 cpu=1 pid=4975 ... A fixed size 8-byte buffer is allocated, and a variable size field is read into it; there is no particular bound on the size of the field (it is dependent on hardware and configuration) and it can overflow [also verified by inserting printk's.] The patch attempts to size the buffer to the correctly. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9043): S5H1420: Fix size of shadow-array to avoid overflowPatrick Boettcher
The array size of 'shadow' still needs to be fixed in order to not overflow when reading register 0x00. Thanks to Oliver Endriss for pointing that out. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9037): Fix support for Hauppauge Nova-S SEPatrick Boettcher
Different backends have different input busses (saa7146, flexcop). To reflect that a config-option to the s5h1420-driver was added which makes the output mode selectable. Furthermore the s5h1420-driver is now doing the same i2c-method as it was done before adding support for other i2c-users. This patch needs to go into the current release of the kernel, as this driver is currently broken. (Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (9029): Fix deadlock in demux codeAndreas Oberritter
The functions dvb_dmxdev_section_callback, dvb_dmxdev_ts_callback, dvb_dmx_swfilter_packet, dvb_dmx_swfilter_packets, dvb_dmx_swfilter and dvb_dmx_swfilter_204 may be called from both interrupt and process context. Therefore they need to be protected by spin_lock_irqsave() instead of spin_lock(). This fixes a deadlock discovered by lockdep. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStickMichael Krufky
2040:5510 is the same hardware as 2040:5500 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStickMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8967): Use correct XC3028L firmware for AMD ATI TV Wonder 600Devin Heitmueller
The AMD ATI TV Wonder 600 has an XC3028L and *not* an XC3028, so we need to load the proper firmware to prevent the device from overheating. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8963): s2255drv field count fixDean Anderson
Fixes videobuf field_count Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8961): zr36067: Fix RGBR pixel formatJean Delvare
The zr36067 driver is improperly declaring pixel format RGBP twice, once as "16-bit RGB LE" and once as "16-bit RGB BE". The latter is actually RGBR. Fix the code to properly map both pixel formats. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8960): drivers/media/video/cafe_ccic.c needs mm.hAndrew Morton
sparc32 allmodconfig: drivers/media/video/cafe_ccic.c: In function 'cafe_setup_siobuf': drivers/media/video/cafe_ccic.c:1192: error: implicit declaration of function 'PAGE_ALIGN' drivers/media/video/cafe_ccic.c: At top level: drivers/media/video/cafe_ccic.c:1430: error: variable 'cafe_v4l_vm_ops' has initializer but incomplete type drivers/media/video/cafe_ccic.c:1431: error: unknown field 'open' specified in initializer drivers/media/video/cafe_ccic.c:1431: warning: excess elements in struct initializer drivers/media/video/cafe_ccic.c:1431: warning: (near initialization for 'cafe_v4l_vm_ops') drivers/media/video/cafe_ccic.c:1432: error: unknown field 'close' specified in initializer drivers/media/video/cafe_ccic.c:1433: warning: excess elements in struct initializer drivers/media/video/cafe_ccic.c:1433: warning: (near initialization for 'cafe_v4l_vm_ops') drivers/media/video/cafe_ccic.c: In function 'cafe_v4l_mmap': drivers/media/video/cafe_ccic.c:1444: error: 'VM_WRITE' undeclared (first use in this function) drivers/media/video/cafe_ccic.c:1444: error: (Each undeclared identifier is reported only once drivers/media/video/cafe_ccic.c:1444: error: for each function it appears in.) drivers/media/video/cafe_ccic.c:1444: error: 'VM_SHARED' undeclared (first use in this function) drivers/media/video/cafe_ccic.c:1461: error: 'VM_DONTEXPAND' undeclared (first use in this function) This build breakage is caused by some header file shuffle in linux-next. But I suggest that this patch be merged ahead of linux-next to avoid bisection breakage. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8958): zr36067: Return proper bytes-per-line valueJean Delvare
The zr36067 driver should return the actual bytes-per-line value when queried with ioctl VIDIOC_G_FMT, instead of 0. Otherwise user-space applications can get confused. Likewise, with ioctl VIDIOC_S_FMT, we are supposed to fill the bytes-per-line value. And we shouldn't fail if the caller sets the initial value to something different from 0. This is perfectly valid for applications to pre-fill this field with the value they expect. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8957): zr36067: Restore the default pixel formatJean Delvare
Restore the default pixel format to YUYV as it used to be before kernel 2.6.23. It was accidentally changed to BGR3 by commit 603d6f2c8f9f3604f9c6c1f8903efc2df30a000f. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8955): bttv: Prevent NULL pointer dereference in radio_openJean Delvare
Fix the following crash in the bttv driver: BUG: unable to handle kernel NULL pointer dereference at 000000000000036c IP: [<ffffffffa037860a>] radio_open+0x3a/0x170 [bttv] This happens because radio_open assumes that all present bttv devices have a radio function. If a bttv device without radio and one with radio are installed on the same system, and the one without radio is registered first, then radio_open checks for the radio device number of a bttv device that has no radio function, and this breaks. All we have to do to fix it is to skip bttv devices without a radio function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8935): em28xx-cards: Remove duplicate entry ↵Douglas Schilling Landgraf
(EM2800_BOARD_KWORLD_USB2800) Removed duplicated entry for EM2800_BOARD_KWORLD_USB2800 Signed-off-by: Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8933): gspca: Disable light frquency for zc3xx cs2102 Kokom.Costantino Leandro
CS2102K stop streaming on setlightfreq (50Hz & 60Hz). Disable it for now until a correct solution is found. Signed-off-by: Costantino Leandro <le_costantino@pixartargentina.com.ar> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8926): gspca: Bad fix of leak memory (changeset 43d2ead315b1).Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8919): cx18: Fix tuner audio input for Compro H900 cardsHans Verkuil
Earlier fixes to get the tuner audio working correctly broke the audio on the Compro VideoMate H900 cards. This is now fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-03ACPI: Make /proc/acpi/wakeup interface handle PCI devices (again)Rafael J. Wysocki
Make the ACPI /proc/acpi/wakeup interface set the appropriate wake-up bits of physical devices corresponding to the ACPI devices and make those bits be set initially for devices that are enabled to wake up by default. This is needed to restore the 2.6.26 and earlier behavior for the PCI devices that were previously handled correctly with the help of the /proc/acpi/wakeup interface. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-10 23:42:36 +0000