aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2006-03-20[IRDA] sem2mutex: drivers/net/irdaArjan van de Ven
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[NET]: dev_put/dev_hold cleanupStephen Hemminger
Get rid of the old __dev_put macro that is just a hold over from pre 2.6 kernel. And turn dev_hold into an inline instead of a macro. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: update version and reldateMichael Chan
Update version to 3.52. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add firmware version infoMichael Chan
Add fw_version information to ethtool -i. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: nvram cleanupMichael Chan
Some nvram related cleanup: 1. Add a tg3_nvram_read_swab() since swabing the data is frequently done. 2. Add a function to convert nvram address to physical address instead of doing it in 2 separate places. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Fixup memory test for 5787Michael Chan
Ethtool memory test on 5787 requires a new memory table. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add new one-shot MSI handlerMichael Chan
Support one-shot MSI on 5787. This one-shot MSI idea is credited to David Miller. In this mode, MSI disables itself automatically after it is generated, saving the driver a register access to disable it for NAPI. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add ipv6 checksum supportMichael Chan
Support ipv6 tx csum on 5787 by setting NETIF_F_HW_CSUM. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add new hard_start_xmitMichael Chan
Support 5787 hardware TSO using a new flag TG3_FLG2_HW_TSO_2. Since the TSO interface is slightly different and these chips have finally fixed the 4GB DMA problem and do not have the 40-bit DMA problem, a new hard_start_xmit is used for these chips. All previous chips will use the old hard_start_xmit that is now renamed tg3_start_xmit_dma_bug(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add 5787 nvram supportMichael Chan
Support additional nvrams and new nvram format for 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add 5787 and 5754 basic supportMichael Chan
Add basic support for 2 new chips 5787 and 5754. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[NET]: Move destructor from neigh->ops to neigh_paramsMichael S. Tsirkin
struct neigh_ops currently has a destructor field, which no in-kernel drivers outside of infiniband use. The infiniband/ulp/ipoib in-tree driver stashes some info in the neighbour structure (the results of the second-stage lookup from ARP results to real link-level path), and it uses neigh->ops->destructor to get a callback so it can clean up this extra info when a neighbour is freed. We've run into problems with this: since the destructor is in an ops field that is shared between neighbours that may belong to different net devices, there's no way to set/clear it safely. The following patch moves this field to neigh_parms where it can be safely set, together with its twin neigh_setup. Two additional patches in the patch series update ipoib to use this new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[NET]: Convert RTNL to mutex.Stephen Hemminger
This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[CONNECTOR]: Use netlink_has_listeners() to avoind unnecessary allocations.Evgeniy Polyakov
Return -ESRCH from cn_netlink_send() when there are not listeners, just as it could be done by netlink_broadcast(). Propagate netlink_broadcast() error back to the caller. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: TOIM3232 dongle supportDavid Basden
Here goes a patch for supporting TOIM3232 based serial IrDA dongles. The code is based on the tekram dongle code. It's been tested with a TOIM3232 based IRWave 320S dongle. It may work for TOIM4232 dongles, although it's not been tested. Signed-off-by: David Basden <davidb-irda@rcpt.to> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Fix tg3_get_ringparam()Michael Chan
Fix-up tg3_get_ringparam() to return the correct parameters. Set the jumbo rx ring parameter only if it is supported by the chip and currently in use. Add missing value for tx_max_pending, noticed by Rick Jones. Update version to 3.51. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add some missing netif_running() checksMichael Chan
Add missing netif_running() checks in tg3's dev->set_multicast_list() and dev->set_mac_address(). If not netif_running(), these 2 calls can simply return 0 after storing the new settings if required. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: pci_register_driver conversionChristophe Lucas
This patch converts 2 IrDA drivers pci_module_init() calls to pci_register_driver(). Signed-off-by: Christophe Lucas <clucas@ifrance.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: sti/cli removal from EP7211 IrDA driverDavid chosrova
This patch replaces the deprecated sti/cli routines with the corresponding spin_lock ones. Signed-off-by: David chosrova <david.chosrova@libertysurf.fr> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: support for yet another Thinkpad IrDA chipsetJean Tourrilhes
This patch simply adds support for a variation of the nsc-ircc PC8739x chipset, found in some IBM Thinkpad laptops. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: PM updateDmitry Torokhov
This patch brings the nsc-ircc code to a more up to date power management scheme, following the current device model. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: ISAPnP supportJean Tourrilhes
This enables PnP support for the nsc-ircc chipset. Since we can't fetch the chipset cfg_base from the PnP layer, we just use the PnP information as one more hint when probing the chip. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: include <linux/vmalloc.h>Michael Chan
Include <linux/vmalloc.h> so that it compiles properly on all archs. Update version to 1.4.38. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Update versionMichael Chan
Update version to 1.4.37. Add missing flush_scheduled_work() in bnx2_suspend as noted by Jeff Garzik. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Support larger rx ring sizes (part 2)Michael Chan
Support bigger rx ring sizes (up to 1020) in the rx fast path. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Support larger rx ring sizes (part 1)Michael Chan
Increase maximum receive ring size from 255 to 1020 by supporting up to 4 linked pages of receive descriptors. To accomodate the higher memory usage, each physical descriptor page is allocated separately and the software ring that keeps track of the SKBs and the DMA addresses is allocated using vmalloc. Some of the receive-related fields in the bp structure are re- organized a bit for better locality of reference. The max. was reduced to 1020 from 4080 after discussion with David Miller. This patch contains ring init code changes only. This next patch contains rx data path code changes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Fix bug when rx ring is fullMichael Chan
Fix the rx code path that does not handle the full rx ring correctly. When the rx ring is set to the max. size (i.e. 255), the consumer and producer indices will be the same when completing an rx packet. Fix the rx code to handle this condition properly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Add ethtool -d supportMichael Chan
Add ETHTOOL_GREGS support. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Reduce register test sizeMichael Chan
Eliminate some of the registers in ethtool register test to reduce driver size. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Update version and reldateMichael Chan
Update version to 3.50. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Support shutdown WoL.Michael Chan
Support WoL during shutdown by calling tg3_set_power_state(tp, PCI_D3hot) during tg3_close(). Change the power state parameter to pci_power_t type and use constants defined in pci.h. Certain ethtool operations cannot be performed after tg3_close() because the device will go to low power state. Add return -EAGAIN in such cases where appropriate. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Enable TSO by defaultMichael Chan
Enable TSO by default on newer chips that support TSO in hardware. Leave TSO off by default on older chips that do firmware TSO because performance is slightly lower. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add support for 5714S and 5715SMichael Chan
Add support for 5714S and 5715S. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits) [SPARC64]: Update defconfig. [SPARC64]: Fix 2 bugs in huge page support. [SPARC64]: CONFIG_BLK_DEV_RAM fix [SPARC64]: Optimized TSB table initialization. [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build. [SPARC64]: Use SLAB caches for TSB tables. [SPARC64]: Don't kill the page allocator when growing a TSB. [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set. [SPARC64]: Increase top of 32-bit process stack. [SPARC64]: Top-down address space allocation for 32-bit tasks. [SPARC64] bbc_i2c: Fix cpu check and add missing module license. [SPARC64]: Fix and re-enable dynamic TSB sizing. [SUNSU]: Fix missing spinlock initialization. [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts. [SPARC64]: First cut at VIS simulator for Niagara. [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check. [SPARC64]: Add SMT scheduling support for Niagara. [SPARC64]: Fix 32-bit truncation which broke sparsemem. [SPARC64]: Move over to sparsemem. [SPARC64]: Fix new context version SMP handling. ...
2006-03-20Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (150 commits) [PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2 [PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.h [PATCH] ipw2100: semaphore to mutexes conversion [PATCH] ipw2100: Fix radiotap code gcc warning [PATCH] ipw2100: add radiotap headers to packtes captured in monitor mode [PATCH] ipw2x00: expend Copyright to 2006 [PATCH] drivers/net/wireless/ipw2200.c: fix an array overun [PATCH] ieee80211: Don't update network statistics from off-channel packets. [PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1 [PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format [PATCH] ipw2200: wireless extension sensitivity threshold support [PATCH] ipw2200: Enables the "slow diversity" algorithm [PATCH] ipw2200: Set a meaningful silence threshold value [PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG [PATCH] ipw2200: Change debug level for firmware error logging [PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode [PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment [PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1' [PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking [PATCH] ipw2200: Add signal level to iwlist scan output ...
2006-03-20Merge branch 'block-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/block * 'block-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/block: [PATCH] fix rmmod problems with elevator attributes, clean them up [PATCH] elevator_t lifetime rules and sysfs fixes [PATCH] noise removal: cfq-iosched.c [PATCH] don't bother with refcounting for cfq_data [PATCH] fix sysfs interaction and lifetime rules handling for queues [PATCH] regularize blk_cleanup_queue() use [PATCH] fix cfq_get_queue()/ioprio_set(2) races [PATCH] deal with rmmod/put_io_context() races [PATCH] stop elv_unregister() from rogering other iosched's data, fix locking [PATCH] stop cfq from pinning queue down [PATCH] make cfq_exit_queue() prune the cfq_io_context for that queue [PATCH] fix the exclusion for ioprio_set() [PATCH] keep sync and async cfq_queue separate [PATCH] switch to use of ->key to get cfq_data by cfq_io_context [PATCH] stop leaking cfq_data in cfq_set_request() [PATCH] fix cfq hash lookups [PATCH] fix locking in queue_requests_store() [PATCH] fix double-free in blk_init_queue_node() [PATCH] don't do exit_io_context() until we know we won't be doing any IO
2006-03-20Merge branch 'upstream' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2006-03-20Merge branch 'master'Jeff Garzik
2006-03-20[SPARC64] bbc_i2c: Fix cpu check and add missing module license.David S. Miller
Should allow cheetah_plus cpu types and don't taint the kernel. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SUNSU]: Fix missing spinlock initialization.David S. Miller
Caught by CONFIG_DEBUG_SPINLOCK. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.David S. Miller
Sun does't put an SEEPROM behind the tigon3 chip, among other things, so accesses to these areas just give bus timeouts. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC] serial: Make sure sysfs nodes get named correctly.David S. Miller
Because we play this trick where we use ttyS? in increasing minor numbers for different sunfoo.c drivers, we have to inform the TTY layer of this. Do so by setting the tty->name_base appropriately. Probably there should be a generic way to do this in the serial core, but for now... Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Fix locking in sunhv_start_tx()David S. Miller
Caller takes the lock already. Also, fixup the poll loop in sunhv_break_ctl(). Just like in console write, we udelay(2) and use a loop limit of 1000000 iterations. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Put sunhv.o earliest in the list of sparc serial drivers.David S. Miller
So that it will show up as /dev/ttyS0. Otherwise things like installers will try to run on whatever serial port gets probed first. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Support SYSRQ properly.David S. Miller
By calling uart_handle_break(). We'll still do the "sun_do_break()" handling if the user gives two breaks in a row. We should probably do this in the other Sparc serial drivers too. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Fix OOPS on sunhv interrupts.David S. Miller
Until the uart is openned, port->info is NULL. Also, init the port->irq properly and give a non-zero port->membase so that the uart device reporting is done. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Decode virtual-devices interrupts correctly.David S. Miller
Need to translate through the interrupt-map{,-mask] properties. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Bug fixes.David S. Miller
Add udelay to polling console write loop, and increment the loop limit. Name the device "ttyHV" and pass that to add_preferred_console() when we're using hypervisor console. Kill sunhv_console_setup(), it's empty. Handle the case where we don't want to use hypervisor console. (ie. we have a head attached to a sun4v machine) Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64] sunhv: Use virtual-devices layer to get interrupt.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[SPARC64]: Prevent registering wrong serial console.David S. Miller
If the console is not for a particular Sun serial controller, set the drv->cons to NULL. Signed-off-by: David S. Miller <davem@davemloft.net>