aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-07-10Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: fix compilation warnings UBI: fix NOR flash recovery UBI: nicify image sequence number handling UBI: add image sequence number to EC header UBI: remove bogus debugging checks UBI: add empty eraseblocks verification
2009-07-10Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] define KTIME_SCALAR for 32-bit s390 [S390] add generic atomic64 support for 31 bit [S390] improve suspend/resume error messages [S390] set SCHED_OMIT_FRAME_POINTER for s390 [S390] add __ucmpdi2() helper function [S390] perf_counter build fix [S390] shutdown actions: save/return rc from init function [S390] dasd: correct debugfeature sense dump [S390] udelay: disable lockdep to avoid false positives [S390] monreader: fix dev_set_drvdata conversion [S390] sclp: fix compile error for !SCLP_CONSOLE
2009-07-10Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds
* 'for-linus' of git://git.open-osd.org/linux-open-osd: osdblk: Adjust queue limits to lower device's limits osdblk: a Linux block device for OSD objects MAINTAINERS: Add osd maintained files (F:) exofs: Avoid using file_fsync() exofs: Remove IBM copyrights exofs: Fix bio leak in error handling path (sync read)
2009-07-10Merge branch 'drm-intel-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits) drm/i915: Fix for LVDS VBT change on IGDNG drm/i915: Zap the GTT mapping when transitioning from untiled to tiled. drm/i915: Refactor calls to unmap_mapping_range drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode drm: Disable the unused connectors explicitly when resuming with KMS. drm/i915: Restore the KMS modeset for every activated CRTC drm/i915: Fix harmless warning from patch merged after i2c rework. drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture. drm/i915: Check the LID device to decide whether the LVDS should be initialized drm/i915: Move lock to more reasonable location drm/i915: Add gtt_offset to gem object list debugfs output drm/i915: Remove gtt_bound from drm_i915_gem_object drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF. drm/i915: crt fetch EDID by DVI-I converter on G4x platform drm/i915: Don't update display FIFO watermark on IGDNG drm/i915: Adjust DisplayPort clocks to use 96MHz reference drm/i915: Make driver less chatty drm/i915: fix up a raw 64bit divide drm/i915: enable sdvo lvds scaling function. drm/i915: Set SSC frequency for 8xx chips correctly ...
2009-07-10Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cfq-iosched: reset oom_cfqq in cfq_set_request() block: fix sg SG_DXFER_TO_FROM_DEV regression block: call blk_scsi_ioctl_init() Fix congestion_wait() sync/async vs read/write confusion
2009-07-10Merge branch 'core-fixes-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: dma-debug: Fix the overlap() function to be correct and readable oprofile: reset bt_lost_no_mapping with other stats x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon signals: declare sys_rt_tgsigqueueinfo in syscalls.h rcu: Mark Hierarchical RCU no longer experimental dma-debug: Put all hash-chain locks into the same lock class dma-debug: fix off-by-one error in overlap function
2009-07-10drm/i915: Fix for LVDS VBT change on IGDNGZhenyu Wang
IGDNG mobile chip's LVDS data block removes panel fitting register definition. So this fixes offset for LVDS timing block parsing. Thanks for Michael Fu to catch this. Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-10drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.Eric Anholt
As of 52dc7d32b88156248167864f77a9026abe27b432, we could leave an old linear GTT mapping in place, so that apps trying to GTT-mapped write in tiled data wouldn't get the fence added, and garbage would get displayed. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-10drm/i915: Refactor calls to unmap_mapping_rangeChris Wilson
As we call unmap_mapping_range() twice in identical fashion, refactor and attempt to explain why we need to call unmap_mapping_range(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-10drm/i915: Avoid saving/restore the modesetting registers twice in KMS modeZhao Yakui
In KMS mode we now use the normal mode-setting paths to set the modes back to the current configuration, so we don't need to also run the more limited non-KMS implementation of modesetting for resume. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-10drm: Disable the unused connectors explicitly when resuming with KMS.Zhao Yakui
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-10drm/i915: Restore the KMS modeset for every activated CRTCZhao Yakui
Restore the modeset for every activated CRTC in course of resume. This is realized by calling the function of drm_helper_resume_force_mode. Note: it is meaningful only for the KMS mode. https://bugs.freedesktop.org/show_bug.cgi?id=21719 https://bugs.freedesktop.org/show_bug.cgi?id=21708 https://bugs.freedesktop.org/show_bug.cgi?id=22285 https://bugs.freedesktop.org/show_bug.cgi?id=22263 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-10drm/i915: Fix harmless warning from patch merged after i2c rework.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-10drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.Eric Anholt
This is seen on some G41 systems, where the BIOS will consume all but a few KB of the aperture. This should be bad for all operating systems, as it means that the OS can't dynamically manage memory between graphics and the rest of the system, and OSes that did static memory management statically add memory in addition to the BIOS allocation anyway. So, instead of working around it, just fail out verbosely. fd.o bug #21574 Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
2009-07-10block: fix sg SG_DXFER_TO_FROM_DEV regressionFUJITA Tomonori
I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use the block layer mapping API (2.6.28). Douglas Gilbert explained SG_DXFER_TO_FROM_DEV: http://www.spinics.net/lists/linux-scsi/msg37135.html = The semantics of SG_DXFER_TO_FROM_DEV were: - copy user space buffer to kernel (LLD) buffer - do SCSI command which is assumed to be of the DATA_IN (data from device) variety. This would overwrite some or all of the kernel buffer - copy kernel (LLD) buffer back to the user space. The idea was to detect short reads by filling the original user space buffer with some marker bytes ("0xec" it would seem in this report). The "resid" value is a better way of detecting short reads but that was only added this century and requires co-operation from the LLD. = This patch changes the block layer mapping API to support this semantics. This simply adds another field to struct rq_map_data and enables __bio_copy_iov() to copy data from user space even with READ requests. It's better to add the flags field and kills null_mapped and the new from_user fields in struct rq_map_data but that approach makes it difficult to send this patch to stable trees because st and osst drivers use struct rq_map_data (they were converted to use the block layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer mapping API. zhou sf reported this regiression and tested this patch: http://www.spinics.net/lists/linux-scsi/msg37128.html http://www.spinics.net/lists/linux-scsi/msg37168.html Reported-by: zhou sf <sxzzsf@gmail.com> Tested-by: zhou sf <sxzzsf@gmail.com> Cc: stable@kernel.org Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10Fix congestion_wait() sync/async vs read/write confusionJens Axboe
Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke the bdi congestion wait queue logic, causing us to wait on congestion for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10oprofile: reset bt_lost_no_mapping with other statsMaynard Johnson
The bt_lost_no_mapping is not getting reset at the start of a profiling run, thus the oprofiled.log shows erroneous values for this statistic. The attached patch fixes this problem. Signed-off-by: Maynard Johnson <maynardj@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF support [WATCHDOG] SA1100 watchdog maximum timeout [WATCHDOG] w83697ug, fix lock imbalance [WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolons
2009-07-09mx3fb: fix regression with uninitalized fb_info->mm_lock mutexKrzysztof Helt
Remove call to the mx3fb_set_par() and the mx3fb_blank() before the register_framebuffer(). This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap locking" Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-09sm501fb: fix regression with uninitalized fb_info->mm_lock mutexKrzysztof Helt
Remove call to the fb_set_par() before the register_framebuffer(). This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap locking" Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) cxgb3: Fix crash caused by stashing wrong netdev_queue ixgbe: Fix coexistence of FCoE and Flow Director in 82599 memory barrier: adding smp_mb__after_lock net: adding memory barrier to the poll and receive callbacks netpoll: Fix carrier detection for drivers that are using phylib includecheck fix: include/linux, rfkill.h p54: tx refused but queue active Atheros Kconfig needs to be dependent on WLAN_80211 mac80211: fix docbook mac80211_hwsim: avoid NULL access ssb: Add support for 4318E b43: Add support for 4318E zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device zd1211rw: 07b8:6001 is a ZD1211B r6040: bump driver version to 0.24 and date to 08 July 2009 r6040: restore MIER register correctly when IRQ line is shared ipv4: Fix fib_trie rebalancing, part 4 (root thresholds) davinci_emac: fix kernel oops when changing MAC address while interface is down igb: set lan id prior to configuring phy mac80211: minstrel: avoid accessing negative indices in rix_to_ndx() ...
2009-07-09Fix compile error in bmac.cDave Jones
Looks like the change in ad361c9884e809340f6daca80d56a9e9c871690a wasn't compile tested. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-09cxgb3: Fix crash caused by stashing wrong netdev_queueRoland Dreier
Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how cxgb3 looks up the netdev_queue it stashes away in a qset during initialization. For multiport devices, the TX queue index it uses is offset by the first_qset index of each port. This leads to a crash once LLTX is removed, since hard_start_xmit is called with one TX queue lock held, while the TX reclaim timer task grabs a different (wrong) TX queue lock when it frees skbs. Fix this by removing the first_qset offset used to look up the TX queue passed into t3_sge_alloc_qset() from setup_sge_qsets(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09ixgbe: Fix coexistence of FCoE and Flow Director in 82599Yi Zou
Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR) in 82599 and remove the disabling of FDIR when FCoE is enabled. Currently, FDIR is turned off when FCoE is enabled under the assumption that FCoE is always enabled with DCB being turned on. However, FDIR does not have to be turned off all the time when FCoE is enabled since FCoE can be enabled without DCB being turned on, e.g., use link pause only. This patch makes sure that when DCB is turned on or off, FDIR is turned on or off correspondingly; and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR set up properly so FCoE and FDIR can coexist regardless of DCB being on or off. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09drm/i915: Check the LID device to decide whether the LVDS should be initializedZhao Yakui
On some boxes the mobile chipset is used and there is no LVDS device. In such case we had better not initialize the LVDS output device so that one pipe can be used for other output device. For example: E-TOP. But unfortunately the LVDS device is still initialized on the boxes based on mobile chipset in KMS mode. It brings that this pipe occupied by LVDS can't be used for other output device. After checking the acpidump we find that there is no LID device on such boxes. In such case we can use the LID device to decide whether the LVDS device should be initialized. If there is no LID device, we can think that there is no LVDS device. It is unnecessary to initialize the LVDS output device. If there exists the LID device, it will continue the current flowchart. Maybe on some boxes there is no LVDS device but the LID device is found. In such case it should be added to the quirk list. http://bugs.freedesktop.org/show_bug.cgi?id=21496 http://bugs.freedesktop.org/show_bug.cgi?id=21856 http://bugs.freedesktop.org/show_bug.cgi?id=21127 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> [anholt: squashed in style fixups] Signed-off-by: Eric Anholt <eric@anholt.net>
2009-07-09[WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF supportSlobodan Tomić
Add support for the W83627EHF/EF and W83627EHG/EG chipsets. Signed-off-by: Slobodan Tomić <stomic@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-07-09[WATCHDOG] SA1100 watchdog maximum timeoutRaphael Assenat
This patch replaces the hardcoded 255 seconds limit for a real limit based on oscr_freq. Also, the 'firmware_version' field is changed to '1' to allow the user space application to easily detect that this driver supports a higher maximum timeout. Signed-off-by: Raphael Assenat <raph@8D.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-07-09[WATCHDOG] w83697ug, fix lock imbalanceJiri Slaby
Don't forget to unlock io_lock when w83697ug_select_wd_register fails in wdt_ctrl. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-07-09[WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-07-08Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix compile failure in cpufreq.c
2009-07-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-07-08fealnx: Fix build breakage -- PR_CONT should be KERN_CONTRoland Dreier
Commit ad361c98 ("Remove multiple KERN_ prefixes from printk formats") broke the build for fealnx because it added some "printk(PR_CONT ..." calls, when PR_CONT doesn't exist; it should be "printk(KERN_CONT ..." Signed-off-by: Roland Dreier <rolandd@cisco.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08[CPUFREQ] Fix compile failure in cpufreq.cDave Jones
managed_policy is out of scope for the non-smp case. Declare it locally where used (twice) Signed-off-by: Dave Jones <davej@redhat.com>
2009-07-08atmel_lcdfb: fix regression with uninitalized fb_info->mm_lock mutexKrzysztof Helt
Remove not needed locking of the fb_info->mm_lock mutex before a frambuffer is registered. This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap locking" Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08fsl-diu-fb: fix regression with uninitalized fb_info->mm_lock mutexKrzysztof Helt
Remove call to the fsl_diu_set_par before the register_framebuffer(). This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap locking" Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Tested-by: "Kai Jiang" <b18973@freescale.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08p54: tx refused but queue activeLarry Finger
In the mainline kernel, p54usb will fail because the TX queue length can become < 0. This problem has been reported as Bugzilla #13725. The failure is expressed by the following message in the logs: WARNING: at net/mac80211/tx.c:1325 ieee80211_tx+0x23c/0x298 [mac80211]() Hardware name: HP Pavilion dv2700 Notebook PC tx refused but queue active This problem has been recently observed in the wireless-testing tree, where a full solution is being tested. That fix is too invasive for 2.6.31-rcX, but the simple change supplied here will prevent the failure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08Atheros Kconfig needs to be dependent on WLAN_80211Jay Sternberg
Atheros top level menu needs a "depends WLAN_80211" to properly indent within menuconfig and xconfig interfaces. This is purely a visual issue but it effects all subsequent drivers. The issue is the top level menu does not include a dependency on WLAN_80211 so within the tree structure, Atheros is at the same level as WLAN_80211 but when WLAN_80211 collapsed, the menu disappears along with all subsequent drives, so it is really a subordinate. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08mac80211_hwsim: avoid NULL accessJohannes Berg
There's a race condition -- started can be set to true before channel is set due to the way mac80211 callbacks currently work (->start should probably pass the channel we would like to have initially). For now simply add a check to hwsim to avoid dereferencing the NULL channel pointer. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08ssb: Add support for 4318EClyde McPherson
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by: Clyde McPherson <ccmcphe@verizon.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08b43: Add support for 4318EClyde McPherson
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by: Clyde McPherson <ccmcphe@verizon.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b deviceHin-Tak Leung
Yevgen Kotikov reported success on the sourceforge zd1211-devs list with the following details: Brand/retail: SONY IFU-WLM2 USB-IDs: Vendor: 0x054C Device: 0x0257 chip ID: zd1211b chip 054c:0257 v4802 high 00-0b-6b AL2230_RF pa0 ----- FCC ID: unknown Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Yevgen Kotikov <yevgen.kotikov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08zd1211rw: 07b8:6001 is a ZD1211BPascal Terjan
On a shuttle machine here we got 07b8:6001 device, handled by zd1211rw, which does not work. Scanning is OK but association does not work, we get "direct probe to AP xxx timed out" It appears that this simple patch makes the device work perfectly. This id was already there in initial import of the driver so I don't know if it has ever been working as ZD1211 (which would mean they changed it and kept the id :( ). Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08r6040: bump driver version to 0.24 and date to 08 July 2009Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08r6040: restore MIER register correctly when IRQ line is sharedFlorian Fainelli
When the r6040 device IRQ line is shared we will enter the driver interrupt service routine, mask off the device interrupt enable register (MIER) and return with IRQ_NONE, we would then leave the device with interrupts disabled, this patch fixes that issue. Reported-by: Steve Holland <sdh4@iastate.edu> Signed-off-by: Joe Chou <joe.chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08davinci_emac: fix kernel oops when changing MAC address while interface is downPablo Bitton
Check that network interface is running before changing its MAC address. Otherwise, rxch is accessed when it's NULL - causing a kernel oops. Moreover, check that the new MAC address is valid. Signed-off-by: Pablo Bitton <pablo.bitton@gmail.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Tested-by: Chaithrika U S <chaithrika@ti.com> [tested on DM6467 EVM] Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08igb: set lan id prior to configuring phyAlexander Duyck
The igb driver was defaulting to using the lock for pci-e function 0 for all of the phys due to the fact that the lan id was not being set prior to initialization. This change makes it so that the function id is set prior to checking for the phy id. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08Remove multiple KERN_ prefixes from printk formatsJoe Perches
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08pty: Rework the pty layer to use the normal buffering logicAlan Cox
This fixes the ppp problems and various other issues with call locking caused by one side of a pty called in one locking context trying to match another with differing rules on the other side. We also get a big slack space to work with that means we can bury the flow control deadlock case for any conceivable real world situation. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states [CPUFREQ] fix (utter) cpufreq_add_dev mess [CPUFREQ] Cleanup locking in conservative governor [CPUFREQ] Cleanup locking in ondemand governor [CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported [CPUFREQ] Eliminate the recent lockdep warnings in cpufreq
2009-07-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Clear -EAGAIN in dpm_prepare x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 04:37:26 +0000