aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-07-23ide: use ->tf_load in actual_try_to_identify()Bartlomiej Zolnierkiewicz
Convert actual_try_to_identify() to use ->tf_load instead of ->OUTB. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: use ->tf_load in ide_config_drive_speed()Bartlomiej Zolnierkiewicz
Convert ide_config_drive_speed() to use ->tf_load instead of ->OUTB. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: change order of register access in ide_config_drive_speed()Bartlomiej Zolnierkiewicz
Write ATA Feature register before ATA Sector Count register as a preparation to use ->tf_load in ide_config_drive_speed(). This change shouldn't affect anything (just an usual paranoia). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->set_irq methodBartlomiej Zolnierkiewicz
Add ->set_irq method for setting nIEN bit of ATA Device Control register and use it instead of ide_set_irq(). While at it: * Use ->set_irq in init_irq() and do_reset1(). * Don't use HWIF() macro in ide_check_pm_state(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->read_altstatus methodBartlomiej Zolnierkiewicz
* Remove ide_read_altstatus() inline helper. * Add ->read_altstatus method for reading ATA Alternate Status register and use it instead of ->INB. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->read_status methodBartlomiej Zolnierkiewicz
* Remove ide_read_status() inline helper. * Add ->read_status method for reading ATA Status register and use it instead of ->INB. While at it: * Don't use HWGROUP() macro. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->exec_command methodBartlomiej Zolnierkiewicz
Add ->exec_command method for writing ATA Command register and use it instead of ->OUTBSYNC. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: factor out simplex handling from ide_pci_dma_base()Bartlomiej Zolnierkiewicz
* Factor out simplex handling from ide_pci_dma_base() to ide_pci_check_simplex(). * Set hwif->dma_base early in ->init_dma method / ide_hwif_setup_dma() and reset it in ide_init_port() if DMA initialization fails. * Use ->read_sff_dma_status instead of ->INB in ide_pci_dma_base(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove ide_setup_dma()Bartlomiej Zolnierkiewicz
Export sff_dma_ops and then remove ide_setup_dma(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: remove ->dma_{status,command} fields from ide_hwif_tBartlomiej Zolnierkiewicz
* Use ->dma_base + offset instead of ->dma_{status,command} and remove no longer needed ->dma_{status,command}. While at it: * Use ATA_DMA_* defines. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: use I/O ops directly in ide-dma.cBartlomiej Zolnierkiewicz
Use I/O ops directly in ide_dma_host_set(), ide_dma_setup(), ide_dma_start() and __ide_dma_end(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: add ->read_sff_dma_status methodBartlomiej Zolnierkiewicz
Add ->read_sff_dma_status method for reading DMA Status register and use it instead of ->INB. While at it: * Use inb() directly in ns87415.c::ns87415_dma_end(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: pass hw_regs_t-s to ide_device_add[_all]() (take 3)Bartlomiej Zolnierkiewicz
* Add 'hw_regs_t **hws' argument to ide_device_add[_all]() and convert host drivers + ide_legacy_init_one() + ide_setup_pci_device[s]() to use it instead of calling ide_init_port_hw() directly. [ However if host has > 1 port we must still set hwif->chipset to hint consecutive ide_find_port() call that the previous slot is occupied. ] * Unexport ide_init_port_hw(). v2: * Use defines instead of hard-coded values in buddha.c, gayle.c and q40ide.c. (Suggested by Geert Uytterhoeven) * Better patch description. v3: * Fix build problem in ide-cs.c. (Noticed by Stephen Rothwell) There should be no functional changes caused by this patch. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: move ide_pci_setup_ports() call out from do_ide_setup_pci_device()Bartlomiej Zolnierkiewicz
* Move ide_pci_setup_ports() call out from do_ide_setup_pci_device() to ide_setup_pci_device[s](). * Drop no longer needed idx argument from do_ide_setup_pci_device(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-pmac: move ide_find_port() call to pmac_ide_setup_device() (take 2)Bartlomiej Zolnierkiewicz
Move ide_find_port() call to pmac_ide_setup_device(). While at it: - fix return value (s/-ENODEV/-ENOENT/) - add DRV_NAME define and use it to set name field of pmac_port_info - use ide_find_port_slot() instead of ide_find_port() - remove superfluous error message (ide_find_port_slot() takes care of it) - drop IDE interface number from driver banner message (but include bus type) v2: * Build fix (thanks to Stephen Rothwell for noticing the issue). Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-pmac: add ->init_dev method (take 4)Bartlomiej Zolnierkiewicz
v2/3: * Build fixes from Stephen Rothwell. v4: * Fix ->noprobe setting. (From Benjamin Herrenschmidt) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide-pmac: store pmif instead of hwif in ->driver_data (take 2)Bartlomiej Zolnierkiewicz
* Pass pmif instead of hwif to pmac_ide_do_{suspend,resume}(). * Store pmif instead of hwif in ->driver_data. * Use dev_get_drvdata() instead of ->hwif_data to obtain pmif. v2: * Build fixes from Stephen Rothwell. There should be no functional changes caused by this patch. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: apple_fn_keys F5 and F6 HID: remove quirk lookup from usbkbd/usbmouse HID: Add mapping of new KEY_MEDIA_REPEAT keycode HID: gyration remote support HID: gyration sleep button quirk HID: add quirk for Logitech DiNovo desktop HID: fix quirk handling in usbmouse/kbd HID: fix memory leak in hidraw_release HID: add n-trig digitizer usage HID: Invert HWHEEL mappings for some Logitech mice HID:usbkbd:mark usb_kbd_keycode array as const HID: add fn key support on Macbook Pro 4,1 and Macbook Air HID: remove unused variable from hiddev compat ioctl HID: fix compile issue in hiddev ioctl HID: Push down BKL into ioctl handler in hidraw HID: Switch hiddev to unlocked_ioctl HID: use get/put_unaligned_* helpers HID: fix report descriptor handling for MS Wireless model 1028
2008-07-23drivers/char/nvram.c: Removed duplicated includeHuang Weiyi
Removed duplicated include file <linux/smp_lock.h> in drivers/char/nvram.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23kgdb: kgdboc console poll hooks for mpsc uartJason Wessel
Add in console polling hooks for the mpsc uart for use with kgdb and kgdboc. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-07-23kgdb: kgdboc console poll hooks for cpm uartJason Wessel
Add in console polling hooks for the cpm uart for use with kgdb and kgdboc. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> CC: galak@kernel.crashing.org
2008-07-23Merge branches 'upstream' and 'upstream-fixes' into for-linusJiri Kosina
2008-07-23HID: apple_fn_keys F5 and F6Henrik Rydberg
In drivers/hid/hid-input.c, the apple_fn_keys translation table contains no entries for the F5 and F6 keys. This patch maps the F5 and F6 keys to KBDILLUMDOWN and KBDILLUMUP, respektively, which make them work as keyboard backlight control keys. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: remove quirk lookup from usbkbd/usbmouseJiri Kosina
This patch completely removes the dependency of usbkbd and usbmouse drivers on usbhid code. usbkbd/usbmouse drivers are not needed in the vast majority of cases anyway, and they shouldn't be loaded in standard configurations at all. They are supposed to be as trivial as possible, and searching for HID_QUIRK_IGNORE can even be bad in some cases. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: Add mapping of new KEY_MEDIA_REPEAT keycodeDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: gyration remote supportDaniel Walker
This adds in a quirk for the additional un-mapped buttons on the gyration MCE remote. Defines are now alphabetical. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: gyration sleep button quirkJiri Kosina
This patch is based on one provided by Jiri Kosina to handle the sleep button. I just added some cleanup and integrated it into my series. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: add quirk for Logitech DiNovo desktopJiri Kosina
Logitech DiNovo desktop needs the same quirk as other DiNovo devices. Reported-by: Farid Benamrouche <farid.benamrouche@free.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: fix quirk handling in usbmouse/kbdJiri Slaby
When usbmouse/kbd is set to build, USB_HID is never defined due to the USB_HID!=y Kconfig rule. Test CONFIG_USB_HID_MODULE in both drivers instead. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: fix memory leak in hidraw_releaseJiri Kosina
hidraw_release() forgot to free the linked list structure, causing memory leak. Reported-by: Juan Marcos Diez Esteban <juan_m_diez@yahoo.es> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: Invert HWHEEL mappings for some Logitech miceDan Nicholson
Some Logitech mice have a tilt wheel which register as HWHEEL buttons. The events are positive for a click to the right and negative for a click to the left. Applications expect the opposite, though. I suspect this affects a lot more Logitech mice, but these are the only two I have. I tested this using evtest and a GTK application. A similar Microsoft Intellimouse I have works correctly. Signed-off-by: Dan Nicholson <dbn.lists@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID:usbkbd:mark usb_kbd_keycode array as constMing Lei
mark it as const because it is read only Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: add fn key support on Macbook Pro 4,1 and Macbook AirAlexandre Karpenko
Added device ids to hid-quriks for detection of keyboards on 4th generation Macbook Pro and Macbook Air The naming scheme is consistent with past Apple keyboards in hid-quirks; as defined by Apple (including device ids) in: /System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyboard.kext/Co ntents/Info.plist Patch was originally posted and tested at: https://bugs.launchpad.net/mactel-support/+bug/207127 Signed-off-by: Alexandre Karpenko <alexander@comm.utoronto.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: remove unused variable from hiddev compat ioctlJiri Kosina
Remove unused inode variable from hiddev compat ioctl handler. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: fix compile issue in hiddev ioctlJiri Kosina
Fix build failure introduced by Alan's ioctl -> unlocked_ioctl (pushing BKL down to the driver) conversion patch for hiddev. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: Push down BKL into ioctl handler in hidrawAlan Cox
In this case I simply wrapped it as code review suggests the locking already terminally broken and I didn't want to make it first. See added comment Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: Switch hiddev to unlocked_ioctlAlan Cox
Push down the BKL. In some cases compat_ioctl already doesn't take the BKL so we don't either. Some of the locking here seems already dubious and object lifetimes want documenting Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23HID: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23Merge branch 'master' of ↵Jiri Kosina
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-07-23sdhci: highmem capable PIO routinesPierre Ossman
Improve the PIO handling so that it can service highmem pages. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: print message when attaching to cardPierre Ossman
Make it a bit more obvious that the card has been claimed by the mmc_test driver so that people don't have to wonder why their block device never shows up. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_block: bounce buffer highmem supportPierre Ossman
Support highmem pages in the bounce buffer code by using the sg_copy_from/to_buffer() functions. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23sdhci: fix bad warning from commit c8b3e02Pierre Ossman
Commit c8b3e02 renamed a variable, but missed one reference to it inside a WARN_ON, causing it to incorrectly trigger. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23sdhci: add warnings for bad buffers in ADMA pathPierre Ossman
The ADMA code path assumes that the 3 byte alignment fix doesn't cross a page boundary. I'm not convinced this is worth supporting, but at least print a warning in the off chance we'll actually see such a request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: test oversized sg listsPierre Ossman
Add tests that make sure the driver properly checks the blocks and blksz fields and doesn't assume the sg list has a size that perfectly matches the current request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: highmem testsPierre Ossman
Add a couple of tests to make sure the host driver handles highmem memory pages properly. Unfortunately there is no way to guarantee an allocation below 4 GB in i386, so it might give you addresses that are out of reach for the hardware (OTOH, so will any other highmem allocation in the kernel). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23s3cmci: ensure host stopped on machine shutdownBen Dooks
Ensure that the s3cmci host controller is turned off when the machine is shutdown, otherwise we end up leaving the card powered and processing insertion and removal events after the system prints "System halted." Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23au1xmmc: suspend/resume implementationManuel Lauss
Basic suspend/resume support: disable peripheral on suspend and reinit on resume. Tested on Au1200. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23s3cmci: fixes for section mismatch warningsBen Dooks
Fix the naming of various functions in the s3cmc driver to stop triggering section mismatch warnings. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23pxamci: trivial fix of DMA alignment register bit clearingKarl Beldan
Signed-off-by: Karl Beldan <karl.beldan@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-07 19:15:06 +0000