aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-11-06[MTD] OneNAND: Enhanced support for DDP (Dual Densitiy Packages)Kyungmin Park
Add density mask for better support of DDP chips. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] OneNAND: Power Management (PM) supportKyungmin Park
Add suspend/resume Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] OneNAND: Add missing filesKyungmin Park
Simple bad block table source and header files Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: s3c2410 use dev_err() to report errors instead of printk()Ben Dooks
Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: Alchemy board driver cleanupPete Popov
- cleaned up the partitions and include files - added more flexible CS and address detection and setup Regression tested on db1200 and db1550. Signed-off-by: Pete Popov <ppopov@pacbell.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] maps: Add support for MTX-1 Flash deviceJoern Engel
Add support for "4G Systems MTX-1 Flash device", better known as meshcube. From: Bruno Randolf <bruno.randolf@4g-systems.biz> Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: Add suspend/resume functionalityVitaly Wool
The changes introduced allow to suspend/resume NAND flash. A new state (FL_PM_SUSPENDED) is introduced, as well as routines for mtd->suspend and mtd->resume to put the flash in suspended state from software pov. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] maps: Add mapping driver for PQ2FADS boards.Todd Poynor
From: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06OneNAND: Remove OMAP platform driverKyungmin Park
Now we can use the generic platform driver Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] OneNAND: Add generic platform driverKyungmin Park
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] maps/ixp4xx: remove platform specific bitsDavid Vrabel
- Intel chip driver has a reboot notifier so no need to reset the chip here. - Don't play with chip selects (platform code should do this if necessary). Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] OneNAND: Remove experimental Kconfig dependencyKyungmin Park
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[PATCH] OneNAND: Fix bug in write verifyKyungmin Park
- Remove unused block, page parameters - Add constant instead of runtime value Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[PATCH] OneNAND: Add simulatorKyungmin Park
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[PATCH] OneNAND: Update OMAP OneNAND mapping using device driver modelKyungmin Park
- Update OMAP OneNAND mapping file using device driver model - Remove board specific macro and values. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[PATCH] OneNAND: Simple Bad Block handling supportKyungmin Park
Based on NAND memory bad block table code Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[PATCH] OneNAND: Sync. Burst Read supportKyungmin Park
Add OneNAND Sync. Burst Read support Tested with OMAP platform Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] Add initial support for OneNAND flash chipsKyungmin Park
OneNAND is a new flash technology from Samsung with integrated SRAM buffers and logic interface. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] NAND: Use correct mask for OOB size calculationThomas Gleixner
The bit mask used for oob size calculation was using 2 bits instead of one. Fortunately the next bit has been 0 all the time. Thanks to Nathan H. for pointing this out Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] Remove deprecated power management functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] Missing check on kmalloc return in INFTL mount.David Woodhouse
Signed-off-by: Youssef Hmamouche <hyoussef@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] writev support for cfi-cmdset-0001Nicolas Pitre
While this might be useful for all supported flash types, it is mandatory for proper JFFS2 support with Sibley flash. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06{MTD] add support for Intel's "Sibley" flashNicolas Pitre
This updates the Primary Vendor-Specific Extended Query parsing to version 1.4 in order to get the information about the Configurable Programming Mode regions implemented in the Sibley flash, as well as selecting the appropriate write command code. This flash does not behave like traditional NOR flash when writing data. While mtdblock should just work, further changes are needed for JFFS2 use. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] cleanups to cfi_cmdset_0001Nicolas Pitre
This includes improved error handling/reporting plus some other message cleanups. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06[MTD] Add Resident Flash Disk (RFD) supportSean Young
This type of flash translation layer (FTL) is used by the Embedded BIOS by General Software. It is known as the Resident Flash Disk (RFD), see: http://www.gensw.com/pages/prod/bios/rfd.htm Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06Merge branch 'master' of /home/tglx/work/mtd/git/linux-2.6.git/Thomas Gleixner
2005-11-04[PATCH] nvidiafb: Geforce 7800 series support addedCalin A. Culianu
This adds support for the Nvidia Geforce 7800 series of cards to the nvidiafb framebuffer driver. All it does is add the PCI device id for the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work on these cards. I also added the relevant PCI device ids to linux/pci_ids.h I tested it on my 7800 GTX here and it works like a charm. I now can get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text mode to make your eyes BLEED. ;) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-04Merge branch 'srp' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2005-11-04Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2005-11-04Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2005-11-04[USB]: Make early handoff a final fixup instead of a header one.David S. Miller
At header fixup time, it is not yet legal to ioremap() PCI device registers, yet that is what this quirk code needs to do. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-04Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2005-11-04[PATCH] ARM: Reverted 2918/1: [update] Base port of Comdial MP1000 platfromRussell King
No longer maintained
2005-11-04[PATCH] ARM: Reverted 2921/1: Support for the RTC / nvram on the Comdial MP1000Russell King
No longer maintained
2005-11-04[PATCH] ARM: Reverted 2919/1: CS8900A ethernet driver modifications for the ↵Russell King
Comdial MP1000 No longer maintained
2005-11-03[IB] mthca: check P_Key index in modify QPJack Morgenstein
Make sure that the P_Key index passed into mthca_modify_qp() is within the device's P_Key table. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-03[SERIAL] 8250_early.c passing 0 instead of NULLBen Dooks
Fix sparse warning about passing `0` to simple_strtoul() Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-03[IB] umad: fix hot remove of IB devicesRoland Dreier
Fix hotplug of devices for ib_umad module: when a device goes away, kill off all MAD agents for open files associated with that device, and make sure that the device is not touched again after ib_umad returns from its remove_one function. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IB] mthca: fix format of FW versionRoland Dreier
Mellanox has decided that the components of the firmware version are really meant to be displayed in decimal, e.g. 0x000400070190 is version 4.7.400. Change the format we use from "%x.%x.%x" to "%d.%d.%d" to match this convention. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IPoIB] don't compile debug code if debugging isn't enabledRoland Dreier
Don't build ipoib_mcast_iter_ functions if CONFIG_INFINIBAND_IPOIB_DEBUG is not enabled -- their only callers will not be built either. Also move the prototype for ipoib_open() to ipoib.h to fix a sparse warning. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-11-02IB: Add SCSI RDMA Protocol (SRP) initiatorRoland Dreier
Add an InfiniBand SCSI RDMA Protocol (SRP) initiator. This driver is used to talk talk to InfiniBand SRP targets (storage devices). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[IPoIB] remove unneeded initializations to 0Roland Dreier
Shrink our source and .text a little by removing a few assignments of NULL and 0 to memory that is already cleared as part of the allocation. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02Merge git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
2005-11-02[IB] kzalloc() conversionsRoland Dreier
Replace kmalloc()+memset(,0,) with kzalloc(), for a net savings of 35 source lines and about 500 bytes of text. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-02[ARM] AMBA CLCD driver can drive PL110 and PL111 primecellsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02Merge Paulus' treeStephen Rothwell
2005-11-01[PATCH] blk: fix dangling pointer access in __elv_add_requestTejun Heo
cfq's add_req_fn callback may invoke q->request_fn directly and depending on low-level driver used and timing, a queued request may be finished & deallocated before add_req_fn callback returns. So, __elv_add_request must not access rq after it's passed to add_req_fn callback. This patch moves rq_mergeable test above add_req_fn(). This may result in q->last_merge pointing to REQ_NOMERGE request if add_req_fn callback sets it but as RQ_NOMERGE is checked again when blk layer actually tries to merge requests, this does not cause any problem. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[PATCH] ibmveth fix panic in initial replenish cycleSantiago Leon
This patch fixes a panic in the current tree caused by a race condition between the initial replenish cycle and the rx processing of the first packets trying to replenish the buffers. Signed-off-by: Santiago Leon <santil@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01[PATCH] missing platform_device.h includesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-03 13:40:33 +0000