aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (143 commits) USB: xhci depends on PCI. USB: xhci: Add Makefile, MAINTAINERS, and Kconfig entries. USB: xhci: Respect critical sections. USB: xHCI: Fix interrupt moderation. USB: xhci: Remove packed attribute from structures. usb; xhci: Fix TRB offset calculations. USB: xhci: replace if-elseif-else with switch-case USB: xhci: Make xhci-mem.c include linux/dmapool.h USB: xhci: drop spinlock in xhci_urb_enqueue() error path. USB: Change names of SuperSpeed ep companion descriptor structs. USB: xhci: Avoid compiler reordering in Link TRB giveback. USB: xhci: Clean up xhci_irq() function. USB: xhci: Avoid global namespace pollution. USB: xhci: Fix Link TRB handoff bit twiddling. USB: xhci: Fix register write order. USB: xhci: fix some compiler warnings in xhci.h USB: xhci: fix lots of compiler warnings. USB: xhci: use xhci_handle_event instead of handle_event USB: xhci: URB cancellation support. USB: xhci: Scatter gather list support for bulk transfers. ...
2009-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits) debugfs: use specified mode to possibly mark files read/write only debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem. xen: remove driver_data direct access of struct device from more drivers usb: gadget: at91_udc: remove driver_data direct access of struct device uml: remove driver_data direct access of struct device block/ps3: remove driver_data direct access of struct device s390: remove driver_data direct access of struct device parport: remove driver_data direct access of struct device parisc: remove driver_data direct access of struct device of_serial: remove driver_data direct access of struct device mips: remove driver_data direct access of struct device ipmi: remove driver_data direct access of struct device infiniband: ehca: remove driver_data direct access of struct device ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device hvcs: remove driver_data direct access of struct device xen block: remove driver_data direct access of struct device thermal: remove driver_data direct access of struct device scsi: remove driver_data direct access of struct device pcmcia: remove driver_data direct access of struct device PCIE: remove driver_data direct access of struct device ... Manually fix up trivial conflicts due to different direct driver_data direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
2009-06-16Merge branch 'serial'Linus Torvalds
* serial: imx: Check for NULL pointer deref before calling tty_encode_baud_rate atmel_serial: fix hang in set_termios when crtscts is enabled MAINTAINERS: update 8250 section, give Alan Cox a name tty: fix sanity check pty: Narrow the race on ldisc locking tty: fix unused warning when TCGETX is not defined ldisc: debug aids ldisc: Make sure the ldisc isn't active when we close it tty: Fix leaks introduced by the shift to separate ldisc objects Fix conflicts in drivers/char/pty.c due to earlier version of the ldisc race narrowing.
2009-06-16imx: Check for NULL pointer deref before calling tty_encode_baud_rateSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16atmel_serial: fix hang in set_termios when crtscts is enabledHaavard Skinnemoen
After enabling hardware flow control, any subsequent termios call may hang waiting for the transmitter to drain. This appears to be caused by a busy-loop in set_termios() waiting for the transmitter to become empty, which may take a very long time (or hang indefinitely) if the device at the other end is blocking us. A quick look through the tty and serial_core code indicates that any necessary flushing (which is optional) has already been done at this point, so there's no need for the driver to flush the transmitter on its own. Fix it by removing the busy-loop altogether. Tested-by: Eirik Aanonsen <eaa@wprmedical.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16tty: fix sanity checkAlan Cox
The WARN_ON() that was added to tty_reopen can be triggered in the specific case of a hangup occurring during a re-open of a tty which is not in the middle of being otherwise closed. In that case however the WARN() is bogus as we don't hold the neccessary locks to make a correct decision. The case we should be checking is "if the ldisc is not changing and reopen is occuring". We could drop the WARN_ON but for the moment the debug is more valuable even if it means taking a mutex as it will find any other cases. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16pty: Narrow the race on ldisc lockingAlan Cox
The pty code has always been buggy on its ldisc handling. The recent changes made the window for the race much bigger. Pending fixing it properly which is not at all trivial, at least make the race small again so we don't disrupt other dev work. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16tty: fix unused warning when TCGETX is not definedMike Frysinger
If TCGETX is not defined, we end up with this warning: drivers/char/tty_ioctl.c: In function ‘tty_mode_ioctl’: drivers/char/tty_ioctl.c:950: warning: unused variable ‘ktermx’ Since the variable is only used in one case statement, push it down to the local case scope. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16ldisc: debug aidsAlan Cox
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16ldisc: Make sure the ldisc isn't active when we close itAlan Cox
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16tty: Fix leaks introduced by the shift to separate ldisc objectsAlan Cox
Gold star for the kmemleak detector. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (30 commits) sparc64: Update defconfig. sparc: Wire up sys_rt_tgsigqueueinfo(). openprom: Squelch useless GCC warning. sparc: replace uses of CPU_MASK_ALL_PTR sparc64: Add proper dynamic ftrace support. sparc: Simplify code using is_power_of_2() routine. sparc: move of_device common code to of_device_common sparc: remove dma-mapping_{32|64}.h sparc: use dma_map_page instead of dma_map_single sparc: add sync_single_for_device and sync_sg_for_device to struct dma_ops sparc: move the duplication in dma-mapping_{32|64}.h to dma-mapping.h p9100: use standard fields for framebuffer physical address and length leo: use standard fields for framebuffer physical address and length cg6: use standard fields for framebuffer physical address and length cg3: use standard fields for framebuffer physical address and length cg14: use standard fields for framebuffer physical address and length bw2: use standard fields for framebuffer physical address and length sparc64: fix and optimize irq distribution sparc64: Use new dynamic per-cpu allocator. sparc64: Only allocate per-cpu areas for possible cpus. ...
2009-06-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits) Blackfin: hook up new rt_tgsigqueueinfo syscall Blackfin: improve CLKIN_HZ config default Blackfin: initial support for ftrace grapher Blackfin: initial support for ftrace Blackfin: enable support for LOCKDEP Blackfin: add preliminary support for STACKTRACE Blackfin: move custom sections into sections.h Blackfin: punt unused/wrong mutex-dec.h Blackfin: add support for irqflags Blackfin: add support for bzip2/lzma compressed kernel images Blackfin: convert Kconfig style to def_bool Blackfin: bf548-ezkit: update smsc911x resources Blackfin: update aedos-ipipe code to upstream 1.10-00 Blackfin: bf537-stamp: update ADP5520 resources Blackfin: bf518f-ezbrd: fix SPI CS for SPI flash Blackfin: define SPI IRQ in board resources Blackfin: do not configure the UART early if on wrong processor Blackfin: fix deadlock in SMP IPI handler Blackfin: fix flag storage for irq funcs Blackfin: push down exception oops checking ...
2009-06-16Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (33 commits) [S390] s390: hibernation support for s390 [S390] pm: dcssblk power management callbacks. [S390] pm: monreader power management callbacks. [S390] pm: monwriter power management callbacks. [S390] pm: memory hotplug power management callbacks [S390] pm: con3270 power management callbacks. [S390] pm: smsgiucv power management callbacks. [S390] pm: hvc_iucv power management callbacks [S390] PM: af_iucv power management callbacks. [S390] pm: netiucv power management callbacks. [S390] pm: iucv power management callbacks. [S390] iucv: establish reboot notifier [S390] pm: power management support for SCLP drivers. [S390] pm: tape power management callbacks [S390] pm: vmlogrdr power management callbacks [S390] pm: vmur driver power management callbacks [S390] pm: appldata power management callbacks [S390] pm: vmwatchdog power management callbacks. [S390] pm: zfcp driver power management callbacks [S390] pm: claw driver power management callbacks ...
2009-06-16Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: remove some includings of blktrace_api.h mg_disk: seperate mg_disk.h again block: Introduce helper to reset queue limits to default values cfq: remove extraneous '\n' in blktrace output ubifs: register backing_dev_info btrfs: properly register fs backing device block: don't overwrite bdi->state after bdi_init() has been run cfq: cleanup for last_end_request in cfq_data
2009-06-16Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (38 commits) ps3flash: Always read chunks of 256 KiB, and cache them ps3flash: Cache the last accessed FLASH chunk ps3: Replace direct file operations by callback ps3: Switch ps3_os_area_[gs]et_rtc_diff to EXPORT_SYMBOL_GPL() ps3: Correct debug message in dma_ioc0_map_pages() drivers/ps3: Add missing annotations ps3fb: Use ps3_system_bus_[gs]et_drvdata() instead of direct access ps3flash: Use ps3_system_bus_[gs]et_drvdata() instead of direct access ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdata ps3: Use dev_[gs]et_drvdata() instead of direct access for system bus devices block/ps3: remove driver_data direct access of struct device ps3vram: Make ps3vram_priv.reports a void * ps3vram: Remove no longer used ps3vram_priv.ddr_base ps3vram: Replace mutex by spinlock + bio_list block: Add bio_list_peek() powerpc: Use generic atomic64_t implementation on 32-bit processors lib: Provide generic atomic64_t implementation powerpc: Add compiler memory barrier to mtmsr macro powerpc/iseries: Mark signal_vsp_instruction() as maybe unused powerpc/iseries: Fix unused function warning in iSeries DT code ...
2009-06-16Merge branch 'i2c-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: therm_windtunnel: Convert to a new-style i2c driver therm_adt746x: Convert to a new-style i2c driver windfarm: Convert to new-style i2c drivers therm_pm72: Convert to a new-style i2c driver i2c-viapro: Add new PCI device ID for VX855 i2c/chips: Move max6875 to drivers/misc/eeprom i2c: Do not give adapters a default parent i2c: Do not probe for TV chips on Voodoo3 adapters i2c: Retry automatically on arbitration loss i2c: Remove void casts
2009-06-16Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (max6650) Add support for alarms hwmon: (f71882fg) Add support for the F71858F hwmon: (f71882fg) Add temp#_fault sysfs attr for f8000 hwmon: (f71882fg) Sanity check f8000 pwm settings hwmon: (f71882fg) Cleanup f8000 pwm handling hwmon: PCI quirk for hwmon access on MSI MS-7031 board hwmon: (w83627ehf) Add W83627DHG-P support hwmon: (tmp401) Add documentation hwmon: (tmp401) Add support for TI's TMP411 sensors chip hwmon: (tmp401) Add support for TI's TMP401 sensor chip hwmon: (ibmaem) Automatically load on HC10 blade hwmon: Fix more __devexit_p glitches
2009-06-16Merge branch 'acpica' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPICA: Update version to 20090521. ACPICA: Disable preservation of SCI enable bit (SCI_EN) ACPICA: Region deletion: Ensure region object is removed from handler list ACPICA: Eliminate extra call to NsGetParentNode ACPICA: Simplify internal operation region interface ACPICA: Update Load() to use operation region interfaces ACPICA: New: AcpiInstallMethod - install a single control method ACPICA: Invalidate DdbHandle after table unload ACPICA: Fix reference count issues for DdbHandle object ACPICA: Simplify and optimize NsGetNextNode function ACPICA: Additional validation of _PRT packages (resource mgr) ACPICA: Fix DebugObject output for DdbHandle objects ACPICA: Fix allowable release order for ASL mutex objects ACPICA: Mutex support: Fix release ordering issue and current sync level ACPICA: Update version to 20090422. ACPICA: Linux OSL: cleanup/update/merge ACPICA: Fix implementation of AML BreakPoint operator (break to debugger) ACPICA: Fix miscellaneous warnings under gcc 4+ ACPICA: Miscellaneous lint changes ACPICA: Fix possible dereference of null pointer ...
2009-06-16tty: Fix leaks introduced by the shift to separate ldisc objectsAlan Cox
Gold star for the kmemleak detector. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16pty: Narrow the race on ldisc lockingAlan Cox
The pty code has always been buggy on its ldisc handling. The recent changes made the window for the race much bigger. Pending fixing it properly which is not at all trivial, at least make the race small again so we don't disrupt other dev work. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16openprom: Squelch useless GCC warning.David S. Miller
drivers/sbus/char/openprom.c: In function ‘openprom_sunos_ioctl’: drivers/sbus/char/openprom.c:306: warning: ‘opp’ may be used uninitialized in this function Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16p9100: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer are displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16leo: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer are displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16cg6: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer are displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16cg3: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer is displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16cg14: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer is displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16bw2: use standard fields for framebuffer physical address and lengthKrzysztof Helt
Use standard fields fbinfo.fix.smem_start and fbinfo.fix.smem_len for physical address and length of framebuffer. This also fixes output of the 'fbset -i' command - address and length of the framebuffer is displayed correctly. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-16block: remove some includings of blktrace_api.hLi Zefan
When porting blktrace to tracepoints, we changed to trace/block.h for trace prober declarations. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-06-16[S390] pm: dcssblk power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: monreader power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: monwriter power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: memory hotplug power management callbacksGerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: con3270 power management callbacks.Martin Schwidefsky
Introduce the power management callbacks to the 3270 driver. On suspend the current 3270 view is deactivated and for non-console 3270 device the release callback is done. This disconnects the current tty / fullscreen application from the 3270 device. On resume the current view is reactivated, on the tty you get a fresh login. If the system panics before the 3270 device has been resumed, the ccw device for the 3270 console is reactivated with ccw_device_force_console. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: smsgiucv power management callbacks.Martin Schwidefsky
Create dummy iucv-device to get control when the system is suspended and resumed. Server the smsg iucv path on suspend, reestablish the path on resume. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: hvc_iucv power management callbacksHendrik Brueckner
The patch adds supporting for suspending and resuming IUCV HVC terminal devices from disk. The obligatory Linux device driver interfaces has been added by registering a device driver on the IUCV bus. For each IUCV HVC terminal device the driver creates a respective device on the IUCV bus. To support suspend and resume, the PM freeze callback severs any established IUCV communication path and triggers a HVC tty hang-up when the system image is restored. IUCV communication path are no longer valid when the z/VM guest is halted. The device driver initialization has been updated to register devices and the a new routine has been extracted to facilitate the hang-up of IUCV HVC terminal devices. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: netiucv power management callbacks.Ursula Braun
Patch establishes a dummy netiucv device to make sure iucv is notified about suspend/resume even if netiucv is the only loaded iucv-exploting module without any real net_device defined. The PM freeze callback closes all open netiucv connections. Thus the corresponding iucv path is removed. The PM thaw/restore callback re-opens previously closed netiucv connections. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: power management support for SCLP drivers.Michael Holzheu
The SCLP base driver defines a new notifier call back for all upper level SCLP drivers, like the SCLP console, etc. This guarantees that in suspend first the upper level drivers are suspended and afterwards the SCLP base driver. For resume it is the other way round. The SCLP base driver itself registers a new platform device at the platform bus and gets PM notifications via the dev_pm_ops. In suspend, the SCLP base driver switches off the receiver and sender mask This is done in sclp_deactivate(). After suspend all new requests will be rejected with -EIO and no more interrupts will be received, because the masks are switched off. For resume the sender and receiver masks are reset in the sclp_reactivate() function. When the SCLP console is suspended, all new messages are cached in the sclp console buffers. In resume, all the cached messages are written to the console. In addition to that we have an early resume function that removes the cached messages from the suspend image. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: tape power management callbacksFrank Munzert
Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: vmlogrdr power management callbacksStefan Weinhuber
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: vmur driver power management callbacksFrank Munzert
Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: vmwatchdog power management callbacks.Christian Borntraeger
This patch implements suspend/hibernation for the vmwatchdog driver. The pm_notifier_callchain is used to get control on PM events. Since watchdog operation and suspend cannot work together in a reliable fashion, the open flag is also used to prevent suspend and open from happening at the same time. The watchdog can also be active with no open file descriptor. This patch adds another flag which is only changed in vmwdt_keep_alive and vmwdt_disable. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: zfcp driver power management callbacksMartin Petermann
Signed-off-by: Martin Petermann <martin.petermann@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: claw driver power management callbacksFrank Blaschka
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: ctcm driver power management callbacksFrank Blaschka
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: qeth driver power management callbacksFrank Blaschka
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: lcs driver power management callbacksKlaus-Dieter Wacket
Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: con3215 power management callbacksMartin Schwidefsky
Introduce the power management callbacks to the 3215 console. On suspend the console buffer is flushed to the 3215 device to have an empty console buffer. Printks done while the 3215 device is suspended are buffered in the 64K buffer of the 3215 device. If the buffer is full new messages will push out the oldest messages to make room for the most recent message. On resume the buffered messages are printed. If the system panics before the 3215 device is resumed ccw_device_force_console is used to get the console working again. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] cio: force console functionMartin Schwidefsky
If something goes wrong in a suspend / resume cycle a ccw based console if very likely in the suspended state and cannot print anything. Introduce ccw_device_force_console to force the wake up of the console device to be able to print the oops message. The console device drivers should use this function only if the system paniced. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: xpram driver power management callbacksMichael Holzheu
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>