aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-11-10rt2x00: Optimize configuration handlingIvo van Doorn
Implement latest changed from mac80211 configuration handling to optmize configuration handling in rt2x00. * Remove set_retry_limit callback function, handled through config() * Move config_antenna to its own callback function, it isn't handled by mac80211 anymore * Use IEEE80211_CONF_CHANGED_* flags and remove manual checks * Removed deprecated short slot setting through config() and put it in config_erp() through which mac80211 now configures it * Remove config_phymode() and move contents to config_erp() since it only managed the basic rates which is now determined by mac80211 through config_erp(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath5k: update keycache to support TKIP handlingBob Copeland
Newer parts have slots at entry+64 for michael mic and can do WPA-TKIP in hardware. The open-sourced Atheros HAL has code for accessing this portion so now we know how where to put the key material. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath5k: enable hardware encryption for WEPBob Copeland
This change re-enables hardware encryption for ath5k after setting up mac80211 to handle the initialization vectors which happens to make it work. Add a module param (nohwcrypt) to optionally turn it off. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: Add a new event in ieee80211_ampdu_mlme_actionSujith
Send a notification to the driver on succesful reception of an ADDBA response, add IEEE80211_AMPDU_TX_RESUME for this purpose. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove internal RX A-MPDU processingSujith
mac80211 has RX A-MPDU reordering support. Use that and remove redundant RX processing within the driver. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Clear HT info on starting the driverSujith
Doing an interface down/up leaves the old HT assoc information, clear it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove ath_tx_aggr_resp()Sujith
Accessing mac80211's internal state machine is wrong. Will add resumption of a TID in a later patch. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Enable interrupts at the proper placeSujith
config_interface() was the wrong place to enable interrupts when bringing up an interface, move it to ath_open(). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove unnecessary TSF resetSujith
The TSF is already reset properly via mac80211's callback. Resetting it in config_interface() is not needed. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Streamline attach/detachSujith
Simplify attach and detach routines by consolidating the stop and suspend functions. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove unused function ath_get_currentCountry()Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Refactor hw.cSujith
Split hw.c into more manageable files: ani.c calib.c eeprom.c mac.c Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Revamp VAP managementSujith
Remove the internal VAP management routines and embed ath_vap in mac80211's driver private area provided in ieee80211_vif. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Use bitfields to store tid's state in a single variableSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Ensure ath_node is not NULL when updating tx chainmaskSujith
Also, random indentation and whitespace cleanup. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove SM Power Save as it is not supported nowSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Revamp transmit control blockSujith
Use the ath_buf instance associated with each tx frame directly and remove all redundant information in ath_tx_control. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Simplify node attach/detach routinesSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Node cleanupSujith
Start removing the internal node list in ath9k, in preparation for using mac80211's STA list. Remove lists, locks, routines, flags, functions managing nodes in ath9k. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath5k: fix keytable type buglet in ath5k_hw_reset_keyBob Copeland
Be sure we clear out both the mic (if applicable) and the encryption key type. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath5k: Update PCU codeNick Kossifidis
* In set_opmode don't handle antenna settings and preserve other STA_ID1 settings (shouldn't matter because we call it during reset but it makes things cleaner) Also set properly AP/ADHOC indicator flag on CFG while setting AP/ADHOC modes and always enable key search mode. * Properly set BSSID Mask during reset (cache it and reuse it durring set_associd) * Update beacon_init to flush pending BMISS interrupts and handle setting of adhoc beacon ATIM policy flag for ad-hoc mode. Also set TSF to 0 to start TSF increment on AP mode. We need to handle sleep timers for AR5212 there + add support for PCF. * Properly clean MIC key from keytable when TKIP is used (Bob is working on set_key function etc so i leave it for now). Tested on AR5212 (Hainan) and AR5413 and works fine v2 Set PISR on AR5211+ and ISR on AR5210, got to sleep more ;-) Changes-Licensed-under: ISC Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10don't use net/ieee80211.hJohannes Berg
Convert all the drivers using net/ieee80211.h to use linux/ieee80211.h. Contains a bugfix in libertas where the SSID parsing could overrun the buffer when the AP sends invalid information. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Dan Williams <dcbw@redhat.com> [airo, libertas] Acked-by: Pavel Roskin <proski@gnu.org> [orinoco] Acked-by: David Kilroy <kilroyd@googlemail.com> [orinoco] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10iwl3945: remove bogus commentJohannes Berg
I added this comment myself, but it's clearly wrong. I had meant to place it in iwl_mac_add_interface, which at the time didn't honour the MAC address setting, but it does now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: remove SSID driver codeJohannes Berg
Remove the SSID from the driver API since now there is no driver that requires knowing the SSID and I think it's unlikely that any hardware design that does require the SSID will play well with mac80211. This also removes support for setting the SSID in master mode which will require a patch to hostapd to not try. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10adm8211: remove SSID codeJohannes Berg
Since adm8211 currently doesn't implement IBSS mode anyway, it can't be using the SSID. And if/when it does implement IBSS mode, we'll have to see how to make it beacon anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10b43/legacy: remove SSID codeJohannes Berg
The SSID programmed into the device is used by the ucode only to reply to probe requests, a functionality we disable anyway because it doesn't fit with the mac80211/hostapd programming model. Therefore, it isn't useful to program the SSID into device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10iwlwifi: remove unused essid variableJohannes Berg
Now the essid stuff is unused, so remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10iwlwifi: remove implicit direct scanJohannes Berg
When an undirected scan is requested and iwlwifi is not associated but the user has set an SSID (and maybe was associated with that network at some point) then iwlwifi will assume the user wanted to scan for this SSID which seems wrong. Remove this code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10iwl3945: remove dead codeJohannes Berg
Was wondering about this code since supposedly the firmware will add the SSID element. Turns out it's dead, so remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: remove useless NULL initialisersJohannes Berg
When I added .set_frag_threshold I didn't realise it was already there which now generated a sparse warning. Therefore, remove the .set_frag_threshold NULL initialiser, and while at it all the other useless ones. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: eliminate warning for uninitialized variable 'tim_len'John W. Linville
drivers/net/wireless/p54/p54common.c: In function ‘p54_tx’: drivers/net/wireless/p54/p54common.c:1058: warning: ‘tim_len’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: AP & Ad-hoc testingChristian Lamparter
This patch finally adds all necessary code to test Ad-hoc & AP mode with p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: put broadcast frames into the right queuesChristian Lamparter
stlc45xx's specs finally brought some light what all the 4 extra queues for. now CAB data and managment frames have their own queue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: more definitions form lmac_longbow.h and pda.hChristian Lamparter
This patch ports more useful features to p54 - PDR definitions for the synth chips & regulatory domain. - honour IEEE80211_TX_CTL_ASSIGN_SEQ flag, if it's set. - adds some lost mutex_lock & mutex_unlock. - replace two more "magic values" that sneaked past. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: introduce new names for device firmwaresChristian Lamparter
Johannes thought it would have been a good idea to change the firmware names. Note: we still have fallbacks in case our users don't want to "break their running system", but we won't advertise them with MODULE_FIRMWARE. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10netdevice libertas: Fix directly reference of netdev->privWang Chen
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. OK, becasue Dave S. Miller said, "every direct netdev->priv usage is a bug", and I want to kill netdev->priv later, I decided to convert all the direct reference of netdev->priv first. Different to readonly reference of netdev->priv, in this driver, netdev->priv was changed. I use netdev->ml_priv to replace netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-07net: Guaranetee the proper ordering of the loopback device. v2Eric W. Biederman
I was recently hunting a bug that occurred in network namespace cleanup. In looking at the code it became apparrent that we have and will continue to have cases where if we have anything going on in a network namespace there will be assumptions that the loopback device is present. Things like sending igmp unsubscribe messages when we bring down network devices invokes the routing code which assumes that at least the loopback driver is present. Therefore to avoid magic initcall ordering hackery that is hard to follow and hard to get right insert a call to register the loopback device directly from net_dev_init(). This guarantes that the loopback device is the first device registered and the last network device to go away. But do it carefully so we register the loopback device after we clear dev_boot_phase. Signed-off-by: Eric W. Biederman <ebiederm@maxwell.aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-07Revert "net: Guaranetee the proper ordering of the loopback device."David S. Miller
This reverts commit ae33bc40c0d96d02f51a996482ea7e41c5152695.
2008-11-07Merge branch 'davem-next' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-11-07fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously.Komuro
Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix recursive descent in __scm_destroy(). iwl3945: fix deadlock on suspend iwl3945: do not send scan command if channel count zero iwl3945: clear scanning bits upon failure ath5k: correct handling of rx status fields zd1211rw: Add 2 device IDs Fix logic error in rfkill_check_duplicity iwlagn: avoid sleep in softirq context iwlwifi: clear scanning bits upon failure Revert "ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode" tcp: Fix recvmsg MSG_PEEK influence of blocking behavior. netfilter: netns ct: walk netns list under RTNL ipv6: fix run pending DAD when interface becomes ready net/9p: fix printk format warnings net: fix packet socket delivery in rx irq handler xfrm: Have af-specific init_tempsel() initialize family field of temporary selector
2008-11-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: dv1394: fix possible deadlock in multithreaded clients ieee1394: raw1394: fix possible deadlock in multithreaded clients ieee1394: struct device - replace bus_id with dev_name(), dev_set_name() firewire: struct device - replace bus_id with dev_name(), dev_set_name()
2008-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] SAM9 watchdog - supported on all SAM9 and CAP9 processors [WATCHDOG] SAM9 watchdog - update for moved headers
2008-11-06Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: linear: Fix a division by zero bug for very small arrays. md: fix bug in raid10 recovery. md: revert the recent addition of a call to the BLKRRPART ioctl.
2008-11-06Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: Fix "unused variable" warning in pci_dlpar.c powerpc/cell: Fix compile error in ras.c powerpc/ps3: Fix compile error in ps3-lpm.c
2008-11-06Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [JFFS2] fix race condition in jffs2_lzo_compress() [MTD] [NOR] Fix cfi_send_gen_cmd handling of x16 devices in x8 mode (v4) [JFFS2] Fix lack of locking in thread_should_wake() [JFFS2] Fix build failure with !CONFIG_JFFS2_FS_WRITEBUFFER [MTD] [NAND] OMAP2: remove duplicated #include
2008-11-06SAM9 watchdog: update for moved headersAndrew Victor
The architecture header files were recently moved from include/asm-arm/mach-at91/ to arch/arm/mach-at91/include/mach/. The SAM9 watchdog driver still includes a header from the old location. Signed-off-by: Andrew Victor <linux@maxim.org.za> Cc: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-06rtc-cmos: fix boot log messageFrans Pop
-rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs +rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Signed-off-by: Frans Pop <elendil@planet.nl> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-06atmel_serial: keep clock off when it's not neededDavid Brownell
The atmel_serial driver is mismanaging its clock by leaving it on at all times ... the whole point of clock management is to leave it off unless it's actively needed, which conserves power!! Although the kernel doesn't actually hang without my fix, it does discard quite a lot of early console output. The result still looks correct: usart users= 1 on 35000000 Hz, for atmel_usart.0 usart users= 0 off 35000000 Hz, for atmel_usart.2 when using ttyS0 as serial console. [haavard.skinnemoen@atmel.com: Make sure clock is enabled early for console] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 00:45:42 +0000