aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-08-25Merge branch 'linus' into x86/xenIngo Molnar
Conflicts: arch/x86/kernel/paravirt.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-23Fix oops in acer_wmi driver (acer_wmi_init)Arjan van de Ven
The acer_wmi driver does a DMI scan for quirks, and then sets flags into the "interface" datastructure for some cases. However, the quirks happen real early before "interface" is per se initialized from NULL. The patch below 1) adds a NULL pointer check and 2) (re)runs the quirks at the end, when "interface" has it's final value. Reported-by: kerneloops.org Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk> CC: stable@vger.kernel.org Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-22Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] pata_it821x: fix warning libata: Fix a large collection of DMA mode mismatches ahci: sis controllers actually can do PMP pata_via: clean up recent tf_load changes libata: restore SControl on detach libata: use ata_link_printk() when printing SError libata: always do follow-up SRST if hardreset returned -EAGAIN libata: fix EH action overwriting in ata_eh_reset() sata_mv: add the Gen IIE flag to the SoC devices. ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs ahci: RAID mode SATA patch for Intel Ibex Peak DeviceIDs sata_mv: don't issue two DMA commands concurrently libata: implement no[hs]rst force params
2008-08-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix deadlock on RTNL in ipoib_stop() IB/ipath: Fix incorrect check for max physical address in TID IB/ipath: Fix lost UD send work request
2008-08-22[libata] pata_it821x: fix warningJeff Garzik
Reported by Andrew Morton: drivers/ata/pata_it821x.c: In function 'it821x_port_start': drivers/ata/pata_it821x.c:609: warning: 'mtype' may be used uninitialized in this function Pretty horrid fix, but so's a warning.. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22libata: Fix a large collection of DMA mode mismatchesAlan Cox
Dave Müller sent a diff for the pata_oldpiix that highlighted a problem where a lot of the ATA drivers assume dma_mode == 0 means "no DMA" while the core code uses 0xFF. This turns out to have other consequences such as code doing >= XFER_UDMA_0 also catching 0xFF as UDMAlots. Fortunately it doesn't generally affect set_dma_mode, although some drivers call back into their own set mode code from other points. Having been through the drivers I've added helpers for using_udma/using_mwdma dma_enabled so that people don't open code ranges that may change (eg if UDMA8 appears somewhere) Thanks to David for the initial bits [and added fix for pata_oldpiix from and signed-off-by Dave Mueller <dave.mueller@gmx.ch> -jg] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22ahci: sis controllers actually can do PMPTejun Heo
SIS controllers were blacklisted for PMP as enabling it made device detection fail whether the device was PMP or not - the natural conclusion was the controller chokes on SRST w/ pmp==15. However, it turned out that the controller just didn't like issuing SRST after hardreset w/o clearing SError first. Interestingly, the SRST itself succeeds but the following commands fail. If SError is cleared between hardreset and SRST, which is the default behavior now, everything works fine and SIS controllers work with PMPs happily. Remove PMP blacklisting for SIS AHCIs. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Piter PUNK <piterpunk@slackware.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22pata_via: clean up recent tf_load changesTejun Heo
Commit bfce5e0179ad059035df28558724ff60af708e09 implemented custom tf_load for pata_via. This patch cleans it up a bit. * Instead of duplicating whole body, copy tf and set ATA_TFLAG_DEVICE when necessary. * Rename via_ata_tf_load() to via_tf_load(). * No need to set .tf_load in via_port_ops_noirq as it inherits from via_port_ops. * Clean up indentation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Joseph Chan <JosephChan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22libata: restore SControl on detachTejun Heo
Save SControl during probing and restore it on detach. This prevents adjustments made by libata drivers to seep into the next driver which gets attached (be it a libata one or not). It's not clear whether SControl also needs to be restored on suspend. The next system to have control (ACPI or kexec'd kernel) would probably like to see the original SControl value but there's no guarantee that a link is gonna keep working after SControl is adjusted without a reset and adding a reset and modified recovery cycle soley for this is an overkill. For now, do it only for detach. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22libata: use ata_link_printk() when printing SErrorTejun Heo
SError belongs to link not port. Use ata_link_printk() to print it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22libata: always do follow-up SRST if hardreset returned -EAGAINTejun Heo
As an optimization, follow-up SRST used to be skipped if classification wasn't requested even when hardreset requested it via -EAGAIN. However, some hardresets can't wait for device readiness and skipping SRST can cause timeout or other failures during revalidation. Always perform follow-up SRST if hardreset returns -EAGAIN. This makes reset paths more predictable and thus less error-prone. While at it, move hardreset error checking such that it's done right after hardreset is finished. This simplifies followup SRST condition check a bit and makes the reset path easier to modify. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22libata: fix EH action overwriting in ata_eh_reset()Tejun Heo
ehc->i.action got accidentally overwritten to ATA_EH_HARD/SOFTRESET in ata_eh_reset(). The original intention was to clear reset action which wasn't selected. This can cause unexpected behavior when other EH actions are scheduled together with reset. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22sata_mv: add the Gen IIE flag to the SoC devices.Saeed Bishara
The SoC sata port is based on the 7042/6042 devices (Gen IIE). This patch will fix various issues when working with PMP and/or NCQ. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDsSeth Heasley
This patch adds the Intel Ibex Peak (PCH) IDE mode SATA Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22ahci: RAID mode SATA patch for Intel Ibex Peak DeviceIDsSeth Heasley
Resend with proper whitespace. This patch adds the Intel Ibex Peak (PCH) SATA RAID Controller DeviceIDs. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22sata_mv: don't issue two DMA commands concurrentlyTejun Heo
sata_mv allowed issuing two DMA commands concurrently which the hardware allows. Unfortunately, libata core layer isn't ready for this yet and spews ugly warning message and malfunctions on this. Don't allow concurrent DMA commands for now. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-22libata: implement no[hs]rst force paramsTejun Heo
Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: pnp: fix "add acpi:* modalias entries" UIO: generic irq handling for some uio platform devices UIO: uio_pdrv: fix license specification UIO: uio_pdrv: fix memory leak block: drop references taken by class_find_device() block: fix partial read() of /proc/{partitions,diskstats} PM: Remove WARN_ON from device_pm_add driver core: add init_name to struct device PM: don't skip device PM init when CONFIG_PM_SLEEP isn't set and CONFIG_PM is set driver model: anti-oopsing medicine dev_printk(): constify the `dev' argument drivers/base/driver.c: remove unused to_dev() macro Documentation: HOWTO-ja_JP-sync patch Japanese translation of Documentation/SubmitChecklist kobject: Replace ALL occurrences of '/' with '!' instead of only the first one.
2008-08-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp. USB: automatically enable RHSC interrupts USB: Don't rebind before "complete" callback USB: Add new PM callback methods for USB USB: Defer Set-Interface for suspended devices USB: Add udev argument to interface suspend/resume functions USB: cdc-acm: don't unlock acm->mutex on error path MUSB: Fix index register corruption seen with g_ether and Windows host usb: musb: get rid of MUSB_LOGLEVEL and use parameter usb: musb: get rid of procfs entry USB: Fix pxa27x_udc usb speed handling. USB: cdc-acm: quirk for Conexant CX93010 USB modem USB: fix bug in usb_unlink_anchored_urbs() usb-serial: option support HSDPA modem A2502 USB: ISP1760: fixed trivial math in comment
2008-08-21[S390] dcssblk: fix race in dcssblk_add_store()Gerald Schaefer
Concurrently adding the same segment may lead to duplicate device_register() calls, which will trigger an error in kobject code: "... don't try to register things with the same name in the same directory". This patch adds a check to avoid this. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] cio: call ccw driver notify function with lock heldPeter Oberparleiter
Calling a ccw driver's notify function without the ccw device lock held opens up a race window between discovery and handling of a change in the device operational state. As a result, the device driver may encounter unexpected device malfunction, leading to out-of-retry situations or similar. Remove race by extending the ccw device lock from state change discovery to the calling of the notify function. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] dasd: fix data size for PSF/PRSSD commandStefan Weinhuber
The Perform Subsystem Function/Prepare for Read Subsystem Data command requires 12 bytes of parameter data, but the respective data structure dasd_psf_prssd_data has a length of 16 bytes. Current storage servers ignore the obsolete bytes, but older models fail to execute the command and report an incorrect length error. This causes the device initilization for these devices to fail. To fix this problem we need to correct the dasd_psf_prssd_data structure and shorten it to the correct length. Reported-by: Ivan Warren <ivan@vmfacility.fr> Reviewed-by: Ivan Warren <ivan@vmfacility.fr> Tested-by: Ivan Warren <ivan@vmfacility.fr> CC: stable <stable@kernel.org> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
2008-08-21[S390] cio: fix ccw group device cleanupPeter Oberparleiter
Fix ccw group device initialization: initialize device object before using reference counting during cleanup. Fixes the following message when group device initialization fails (e.g. because too few devices where specified): kobject: '<NULL>' (..): is not initialized, yet kobject_put() is being called. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] qdio: remove the module_get & module_put pairJan Glauber
Increasing the qdio reference count for every used subchannel is unnecessary since unloading qdio (if build as a module) is only possible if other modules that use qdio are unloaded. Unloading modules that use qdio in turn requires that these modules shut down all qdio subchannels. Therefore the additional module_get reference is not needed. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] qdio: improve s390 debug feature usageJan Glauber
Improve s390 debug feature usage: - log busy bit in dbf - increase size of dbf views - consistent logging of qdio api calls to setup view - print subchannel number so one can associate the interface with the dbf data - only log events to one view Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] qdio: prevent oopsing if qdio_establish failsJan Glauber
If qdio_establish fails we call qdio_shutdown to cleanup the qdio subchannel. The tiq_list entry may not be valid at that time, therefore we must ignore queues with an invalid list entry in tiqdio_remove_input_queues. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] drivers/s390: Use an IS_ERR test rather than a NULL testJulien Brunel
In case of error, functions dasd_kmalloc_request and idal_buffer_alloc return an ERR pointer, but never return the NULL pointer. So after a call to one of these functions, a NULL test should be replaced by an IS_ERR test. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @correct_null_test@ expression x,E; statement S1, S2; @@ x = ( dasd_kmalloc_request(...) | idal_buffer_alloc(...) ) <... when != x = E if ( ( - x@p2 != NULL + ! IS_ERR ( x ) | - x@p2 == NULL + IS_ERR( x ) ) ) S1 else S2 ...> ? x = E; // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21USB: sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp.Stefan Lippers-Hollmann
sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp. usb 1-2: new high speed USB device using ehci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: USB2VGA dongle found at address 4 usb 1-2: Allocated 8 output buffers usb 1-2: 8MB 1 ch/1 r SDR SDRAM, bus width 32 usb 1-2: New USB device found, idVendor=0711, idProduct=0918 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Signed-off-by: Stefan Lippers-Hollmann <s.L-H@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: automatically enable RHSC interruptsAlan Stern
This patch (as1069c) changes the way OHCI root-hub status-change interrupts are enabled. Currently a special HCD method, hub_irq_enable(), is called when the hub driver is finished using a root hub. This approach turns out to be subject to races, resulting in unnecessary polling. The patch does away with the method entirely. Instead, the driver automatically enables the RHSC interrupt when no more status changes are present. This scheme is safe with controllers using level-triggered semantics for their interrupt flags. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Don't rebind before "complete" callbackAlan Stern
This patch (as1130) fixes an incompatibility between the new PM infrastructure and USB power management. We are not allowed to call drivers' probe routines during a system sleep transition between the "prepare" and "complete" callbacks, but that's exactly what we do when a driver doesn't have full suspend/resume support. Such drivers are unbound during the "suspend" call and reprobed during the "resume" call. The patch causes the reprobe step to be skipped if the "complete" callback hasn't been issued yet, i.e., if the interface's dev.power.status field is not equal to DPM_ON. Thus during the "resume" callback nothing bad will happen, and during the final "complete" callback the reprobing will occur as desired. This fixes the problem reported in Bugzilla #11263. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Add new PM callback methods for USBAlan Stern
This patch (as1129) adds support for the new PM callbacks to usbcore. The new callbacks merely invoke the same old USB power management routines as the old ones did. A minor improvement is that the callbacks are present only in the "USB-device" device_type structure, rather than in the bus_type structure. This way they will be invoked only for USB devices, not for USB interfaces. The core USB PM routines automatically handle suspending and resuming interfaces along with their devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Defer Set-Interface for suspended devicesAlan Stern
This patch (as1128) fixes one of the problems related to the new PM infrastructure. We are not allowed to register new child devices during the middle of a system sleep transition, but unbinding a USB driver causes the core to automatically install altsetting 0 and thereby create new endpoint pseudo-devices. The patch fixes this problem (and the related problem that installing altsetting 0 will fail if the device is suspended) by deferring the Set-Interface call until some later time when it is legal and can succeed. Possible later times are: when a new driver is being probed for the interface, and when the interface is being resumed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Add udev argument to interface suspend/resume functionsAlan Stern
This patch (as1127) makes a minor change to the prototypes of the usb_suspend_interface() and usb_resume_interface() routines. Now the usb_device structure is passed as an argument, instead of being computed on-the-fly from the usb_interface argument. It makes the code look simpler, even if it really isn't much different from before. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: cdc-acm: don't unlock acm->mutex on error pathAlexey Dobriyan
On Wed, Jul 23, 2008 at 03:52:36PM +0300, Andrei Popa wrote: > I installed gnokii-0.6.22-r2 and gave the command "gnokii --identify" > and the kernel oopsed: > > BUG: unable to handle kernel NULL pointer dereference at 00000458 > IP: [<c0444b52>] mutex_unlock+0x0/0xb > [<c03830ae>] acm_tty_open+0x4c/0x214 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Tested-by: Andrei Popa <andrei.popa@i-neo.ro> Cc: stable <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21MUSB: Fix index register corruption seen with g_ether and Windows hostAnand Gadiyar
If Indexed Mode register accesses are enabled, the ep0_rxstate() function calls musb_g_ep0_giveback() before writing to the CSR register. When control returns to this ep0_rxstate, the index register contents are over-written. This causes the CSR register write to fail. Fixed by writing the correct value into the index register before writing to the CSR. This was observed only in ep0_rxstate() with g_ether loaded and the device connected to a MS Windows host PC. Anticipatively fixed ep0_txstate() as well. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21usb: musb: get rid of MUSB_LOGLEVEL and use parameterFelipe Balbi
We can change debugging level on the fly via /sys/module/musb_hdrc/parameters/debug. We can also get rid of the LOGLEVEL facility in Kconfig and rely only in module parameter. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21usb: musb: get rid of procfs entryFelipe Balbi
Drivers should not add procfs. The functionality in the old procfs file will be moved to debugfs. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: Fix pxa27x_udc usb speed handling.Robert Jarzmik
The new composite framework revealed a weakness in the pxa27x_udc driver gadget register function. Instead of checking if speed asked for was USB_LOW_SPEED upon usb_gadget_register() to deny service, it checked only for USB_FULL_SPEED, thus denying service to usb high speed capable gadgets (like g_ether). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: cdc-acm: quirk for Conexant CX93010 USB modemEric Sandeen
This patch gets my Rosewill RNX-56USB USB modem (with Conexant CX93010 chipset) up and running to the point where I can send AT commands and retrieve caller ID data, which is all I want to do with it. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: fix bug in usb_unlink_anchored_urbs()Oliver Neukum
Irqs must not accidentally be reenabled. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21usb-serial: option support HSDPA modem A2502Hiroshi Miura
This patch support NTT DoCoMo A2502 3G/HSDPA modem on option driver. It is produced by AnyDATA Corp. and also sold as KT Freetelecom (Korea) ADU 620UW. It support 3.6Mbps/7.2Mbps hight speed communication. I have tested A2502 with NTT DoCoMo MoperaU ISP service. Signed-off-by: Hiroshi Miura <miurahr@nttdata.co.jp> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21USB: ISP1760: fixed trivial math in commentEnrico Scholz
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Acked-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21UIO: generic irq handling for some uio platform devicesMagnus Damm
This is V3 of uio_pdrv_genirq.c, a platform driver for UIO with generic IRQ handling code. This driver is very similar to the regular UIO platform driver, but is only suitable for devices that are connected to the interrupt controller using unique interrupt lines. The uio_pdrv_genirq driver includes generic interrupt handling code which disables the serviced interrupt in the interrupt controller and makes the user space driver responsible for acknowledging the interrupt in the device and reenabling the interrupt in the interrupt controller. Shared interrupts are not supported since the in-kernel interrupt handler will disable the interrupt line in the interrupt controller, and in a shared interrupt configuration this will stop other devices from delivering interrupts. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21UIO: uio_pdrv: fix license specificationUwe Kleine-König
Thanks to Magnus Damm for pointing that out. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21UIO: uio_pdrv: fix memory leakUwe Kleine-König
Thanks to Magnus Damm for pointing that out. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21PM: Remove WARN_ON from device_pm_addRafael J. Wysocki
PM: Remove WARN_ON from device_pm_add Fix message in device_pm_add() saying that the device will not be added to dpm_list, although in fact the device is going to be added to the list regardless of the ordering violation. Remove the WARN_ON(true) triggered in that situation, because it is hit by USB very often and spams the users' logs. This patch fixes bug #11263 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21driver core: add init_name to struct deviceGreg Kroah-Hartman
This gives us a way to handle both the bus_id and init_name values being used for a while during the transition period. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21PM: don't skip device PM init when CONFIG_PM_SLEEP isn't set and CONFIG_PM ↵Alan Stern
is set This patch (as1124) fixes a couple of bugs in the PM core. The new dev->power.status field should be initialized regardless of whether CONFIG_PM_SLEEP is enabled, and similarly dpm_sysfs_add() should be called whenever CONFIG_PM is enabled. The patch separates out the call to dpm_sysfs_add() from the call to device_pm_add(). As a result device_pm_add() can no longer return an error, so its return type is changed to void. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Romit Dasgupta <romit@ti.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21driver model: anti-oopsing medicineDavid Brownell
Anti-oops medicine for the class iterators ... the oops was observed when a class was implicitly referenced before it was initialized. [Modified by Greg to spit a warning back so someone knows to fix their code] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 22:09:33 +0000