aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-10-29edac: i5400 fix missing CONFIG_PCI defineIra W. Snyder
When building without CONFIG_PCI the edac_pci_idx variable is unused, causing a build-time warning. Wrap the variable in #ifdef CONFIG_PCI, just like the rest of the PCI support. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29edac: i5400 fix csrow mappingJeff Roberson
The i5400 EDAC driver has several bugs with chip-select row computation which most likely lead to bugs in detailed error reporting. Attempts to contact the authors have gone mostly unanswered so I am presenting my diff here. I do not subscribe to lkml and would appreciate being kept in the cc. The most egregious problem was miscalculating the addresses of MTR registers after register 0 by assuming they are 32bit rather than 16. This caused the driver to miss half of the memories. Most motherboards tend to have only 8 dimm slots and not 16, so this may not have been noticed before. Further, the row calculations multiplied the number of dimms several times, ultimately ending up with a maximum row of 32. The chipset only supports 4 dimms in each of 4 channels, so csrow could not be higher than 4 unless you use a row per-rank with dual-rank dimms. I opted to eliminate this behavior as it is confusing to the user and the error reporting works by slot and not rank. This gives a much clearer view of memory by slot and channel in /sys. Signed-off-by: Jeff Roberson <jroberson@jroberson.net> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29twl4030-gpio: remove __devexit markings from remove funcMike Frysinger
The gpio_twl4030_probe() function calls gpio_twl4030_remove(), and the former has __devinit, so the latter cannot use __devexit. Otherwise we hit the section mismatch warning: WARNING: drivers/gpio/built-in.o(.devinit.text+0x71a): Section mismatch in reference from the function _gpio_twl4030_probe() to the function .devexit.text:_gpio_twl4030_remove() The function __devinit _gpio_twl4030_probe() references a function __devexit _gpio_twl4030_remove(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of _gpio_twl4030_remove() so it may be used outside an exit section. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-298250_pci: add IBM Saturn serial cardBenjamin Herrenschmidt
The IBM Saturn serial card has only one port. Without that fixup, the kernel thinks it has two, which confuses userland setup and admin tools as well. [akpm@linux-foundation.org: fix pci-ids.h layout] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Michael Reed <mreed10@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29serial: add ADDI-DATA GmbH PCI-Express communication cards in 8250_pci.c and ↵Krauth.Julien
pci_ids.h Add support for ADDI-DATA GmbH PCI-Express communication cards: APCIe-7300 APCIe-7420 APCIe-7500 APCIe-7800 Warning: 8250_pci.c depends on pci_ids.h. 8250_pci.c Signed-off-by: Krauth Julien <Krauth.Julien@addi-data.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29atmel_serial: fix bad BUILD_BUG_ON() usageHaavard Skinnemoen
is_power_of_2() appears not to be constant enough for BUILD_BUG_ON() after the latest rework, so replace it with an open-coded test. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Jan Beulich <jbeulich@novell.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29loop: fix NULL dereference if mount failsAlexey Dobriyan
Commit bb21488482bd36eae6b30b014d93619063773fd4 ("[PATCH] switch loop") started to pass NULL bdev to ioctl hook. Steps to reproduce: [boot with loop.max_part=1] [mount -o loop something so mount fails] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8 IP: [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 PGD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/ACPI0003:00/power_supply/ACAD/online CPU 0 Modules linked in: zfs nvidia(P) [last unloaded: zfs] Pid: 15177, comm: mount Tainted: P 2.6.32-rc4-zfs #2 Satellite X200 RIP: 0010:[<ffffffff811486ee>] [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 RSP: 0018:ffff88003b3d5bb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000125f RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88003b3d5ce8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00007ffffffff000 R13: 0000000000000000 R14: ffff880071cef280 R15: 00000000000200da FS: 00007fd77cfe7740(0000) GS:ffff880001600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000000b8 CR3: 0000000001001000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 15177, threadinfo ffff88003b3d4000, task ffff88007572f920) Stack: ffff88003b3d5c38 ffffffff812f95f5 ffff88007eeb6600 0000000000000000 <0> 0000000000000000 ffff88003b3d5c18 ffffffff811547d9 ffff88001bf11ef0 <0> 7fffffffffffffff ffff88001bf11ee8 ffff88001bf11ef0 0000000000000000 Call Trace: [<ffffffff812f95f5>] ? schedule_timeout+0x1f5/0x250 [<ffffffff811547d9>] ? rb_insert_color+0x109/0x140 [<ffffffff812fb754>] ? _spin_unlock_irq+0x14/0x40 [<ffffffff812f84c6>] ? wait_for_common+0x66/0x170 [<ffffffff8105a280>] ? default_wake_function+0x0/0x10 [<ffffffff810f8258>] ioctl_by_bdev+0x38/0x50 [<ffffffff811d2481>] loop_clr_fd+0x1e1/0x210 [<ffffffff811d2522>] lo_release+0x72/0x80 [<ffffffff810f934c>] __blkdev_put+0x1ac/0x1d0 [<ffffffff810f937b>] blkdev_put+0xb/0x10 [<ffffffff810f93b9>] blkdev_close+0x39/0x60 [<ffffffff810ccef3>] __fput+0xd3/0x230 [<ffffffff810cd06d>] fput+0x1d/0x30 [<ffffffff810c9680>] filp_close+0x50/0x80 [<ffffffff81061f11>] put_files_struct+0x81/0x100 [<ffffffff81061fde>] exit_files+0x4e/0x60 [<ffffffff81063ec5>] do_exit+0x6b5/0x730 [<ffffffff8107b279>] ? up_read+0x9/0x10 [<ffffffff8104c86e>] ? do_page_fault+0x18e/0x2a0 [<ffffffff81063f81>] do_group_exit+0x41/0xc0 [<ffffffff81064012>] sys_exit_group+0x12/0x20 [<ffffffff81030deb>] system_call_fastpath+0x16/0x1b Code: f8 48 89 e5 48 81 ec 30 01 00 00 48 89 5d d8 4c 89 6d e8 4c 89 65 e0 4c 89 75 f0 4c 89 7d f8 48 89 bd e8 fe ff ff 49 89 cd 89 f3 <49> 8b 88 b8 00 00 00 81 fa 68 12 00 00 0f 84 57 05 00 00 0f 86 RIP [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30 RSP <ffff88003b3d5bb8> CR2: 00000000000000b8 ---[ end trace c0b4d3c3118d1427 ]--- Fixing recursive fault but reboot is needed! Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29omap_hsmmc: add missing probe handler hookRoger Quadros
The missing probe handler hook will never probe the driver. Add it back. Fixes broken MMC on OMAP. We use platform_driver_probe() API since omap_hsmmc is not a hot-pluggable device. Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Tested-by: Felipe Contreras <felipe.contreras@gmail.com> Tested-by: Tony Lindgren <tony@atomide.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29[S390] call home: fix string length handlingHeiko Carstens
After copying uts->nodename to the static nodename array the static version isn't necessarily zero termininated, since the size of the array is one byte too short. Afterwards doing strncat(data, nodename, strlen(nodename)); may copy an arbitrary large amount of bytes. Fix this by getting rid of the static array and using strncat with proper length limit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-29[S390] call home: fix error handling in init functionHeiko Carstens
Fix missing unregister_sysctl_table in case the SCLP doesn't provide the requested feature. Also simplify the whole error handling while at it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-29[S390] s/r: cmm resume fixMartin Schwidefsky
If a suspended z/VM guest has been logged off before the resume the 'SET SMSG IUCV' CP command need to be repeated to reenable sending message via SMSG. This fixes the following error: HCPMFS057I H4214002 not receiving; SMSG off Error: non-zero CP response for command 'SMSG H4214002 CMM SHRINK 5010': #57 Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-29[S390] call home: fix local buffer usage in proc handlerSebastian Ott
Fix the size of the local buffer and use snprintf to prevent further miscalculations. Also fix the usage of bitwise vs logic operations. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-10-29ide: Serialize CMD643 and CMD646 to fix a hardware bug with SSDMikulas Patocka
CMD646 corrupts data on concurrent transfers on both channels when IDE SSD is connected to one of the channels. Setup that demonstrates this hardware bug: Ultra 5, onboard CMD646, rev 3. /dev/hda is 8GB Seagate ST38410A in MWDMA2 /dev/hdd is 32GB SSD SiliconHardDisk in MWDMA2 - When reading /dev/hdd (for example with dd or fsck), reads from /dev/hda are corrupted, there are twiddled single bits 1->0 and some full 32-bit words corrupted, sometimes commands fail (which switches /dev/hda to PIO mode but the corruptions happen even in PIO). - Reads from /dev/hdd don't seem to be corrupted (i.e. fsck passes fine). - When I connected normal rotating harddisk to /dev/hdd, there was no corruption, so the corruption is something specific to SSD. - I tried the same setup on a PCI card with CMD649 and saw no corruption. This patch serializes the operation for CMD646 and 643 (I didn't test CMD643 but it may have the same hw bug too because it's earlier design). CMD649 is good. I don't know anything about CMD 648. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29netdev: usb: dm9601.c can drive a device not supported yet, add support for itJanusz Krzysztofik
I found that the current version of drivers/net/usb/dm9601.c can be used to successfully drive a low-power, low-cost network adapter with USB ID 0a46:9000, based on a DM9000E chipset. As no device with this ID is yet present in the kernel, I have created a patch that adds support for the device to the dm9601 driver. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29qlge: Fix firmware mailbox command timeout.Ron Mercer
The mailbox command process would only process a maximum of 5 unrelated firmware events while waiting for it's command completion status. It should process an unlimited number of events while waiting for a maximum of 5 seconds. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29qlge: Fix EEH handling.Ron Mercer
Clean up driver resources without touch the hardware. Add pci save/restore state. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-28bonding: fix a race condition in calls to slave MII ioctlsJiri Bohac
In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29virtio: order used ring after used index readMichael S. Tsirkin
On SMP guests, reads from the ring might bypass used index reads. This causes guest crashes because host writes to used index to signal ring data readiness. Fix this by inserting rmb before used ring reads. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2009-10-29virtio-pci: fix per-vq MSI-X request logicMichael S. Tsirkin
Commit f68d24082e22ccee3077d11aeb6dc5354f0ca7f1 in 2.6.32-rc1 broke requesting IRQs for per-VQ MSI-X vectors: - vector number was used instead of the vector itself - we try to request an IRQ for VQ which does not have a callback handler This is a regression that causes warnings in kernel log, potentially lower performance as we need to scan vq list, and might cause system failure if the interrupt requested is in fact needed by another system. This was not noticed earlier because in most cases we were falling back on shared interrupt for all vqs. The warnings often look like this: virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X IRQ handler type mismatch for IRQ 1 current handler: i8042 Pid: 2400, comm: modprobe Tainted: G W 2.6.32-rc3-11952-gf3ed8d8-dirty #1 Call Trace: [<ffffffff81072aed>] ? __setup_irq+0x299/0x304 [<ffffffff81072ff3>] ? request_threaded_irq+0x144/0x1c1 [<ffffffff813455af>] ? vring_interrupt+0x0/0x30 [<ffffffff81346598>] ? vp_try_to_find_vqs+0x583/0x5c7 [<ffffffffa0015188>] ? skb_recv_done+0x0/0x34 [virtio_net] [<ffffffff81346609>] ? vp_find_vqs+0x2d/0x83 [<ffffffff81345d00>] ? vp_get+0x3c/0x4e [<ffffffffa0016373>] ? virtnet_probe+0x2f1/0x428 [virtio_net] [<ffffffffa0015188>] ? skb_recv_done+0x0/0x34 [virtio_net] [<ffffffffa00150d8>] ? skb_xmit_done+0x0/0x39 [virtio_net] [<ffffffff8110ab92>] ? sysfs_do_create_link+0xcb/0x116 [<ffffffff81345cc2>] ? vp_get_status+0x14/0x16 [<ffffffff81345464>] ? virtio_dev_probe+0xa9/0xc8 [<ffffffff8122b11c>] ? driver_probe_device+0x8d/0x128 [<ffffffff8122b206>] ? __driver_attach+0x4f/0x6f [<ffffffff8122b1b7>] ? __driver_attach+0x0/0x6f [<ffffffff8122a9f9>] ? bus_for_each_dev+0x43/0x74 [<ffffffff8122a374>] ? bus_add_driver+0xea/0x22d [<ffffffff8122b4a3>] ? driver_register+0xa7/0x111 [<ffffffffa001a000>] ? init+0x0/0xc [virtio_net] [<ffffffff81009051>] ? do_one_initcall+0x50/0x148 [<ffffffff8106e117>] ? sys_init_module+0xc5/0x21a [<ffffffff8100af02>] ? system_call_fastpath+0x16/0x1b virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X Reported-by: Marcelo Tosatti <mtosatti@redhat.com> Reported-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-28virtio-net: fix data corruption with OOMMichael S. Tsirkin
virtio net used to unlink skbs from send queues on error, but ever since 48925e372f04f5e35fec6269127c62b2c71ab794 we do not do this. This causes guest data corruption and crashes with vhost since net core can requeue the skb or free it without it being taken off the list. This patch fixes this by queueing the skb after successful transmit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28sfc: Set ip_summed correctly for page buffers passed to GROBen Hutchings
Page buffers containing packets with an incorrect checksum or using a protocol not handled by hardware checksum offload were previously not passed to LRO. The conversion to GRO changed this, but did not set the ip_summed value accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28cnic: Fix L2CTX_STATUSB_NUM offset in context memory.Michael Chan
The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match the recent firmware update: commit 078b0735881c7969aaf21469f3577831cddd9f8c bnx2: Update firmware to 5.0.0.j3. Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when iSCSI is enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28drm/kms: fix kms/fbdev colormap support properly.Dave Airlie
This sets the fbcon to use TRUECOLOR by default, it then only modifies the pseudo palette for fbcon, and only touches the real palette when in 8-bit pseudo color mode. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm: Add the basic check for the detailed timing in EDIDZhao Yakui
Sometimes we will get the incorrect display modeline when parsing the detailed timing in EDID. For example: >hsync/vsync width is zero >sync is beyond the blank. So add the basic check for the detailed timing in EDID to avoid the incorrect display modeline. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28drm/radeon/kms: ignore vga arbiter return.Dave Airlie
Since we register all radeon devices, and the arbiter only cares about VGA class ones, we will fail to startup on display controller class devices. We don't gain anything by using the return value here. this helps kms on sparc64 get started. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-28Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt
2009-10-27airo: Reorder tests, check bounds before elementRoel Kluin
Test whether index is within bounds before reading the element Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27libertas spi: fix sparse errorsHolger Schurig
This fixes the following sparse warnings: $ make modules SUBDIRS=drivers/net/wireless/libertas C=1 CF=-D__CHECK_ENDIAN__ make: Entering directory `/usr/src/linux-wl' CHECK drivers/net/wireless/libertas/if_spi.c drivers/net/wireless/libertas/if_spi.c:137:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:137:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:137:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:191:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:191:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:191:16: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:256:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:256:24: expected restricted __le32 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:256:24: got unsigned int *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] <noident> drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short *<noident> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27b43: add 'struct b43_wl' missing declarationMiguel Boton
'struct b43_wl' declaration is missing at 'leds.h'. It should be declared to avoid getting some GCC warnings at 'b43_leds_unregister'. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27b43: Fix Bugzilla #14181 and the bug from the previous 'fix'Larry Finger
"b43: Fix PPC crash in rfkill polling on unload" fixed the bug reported in Bugzilla No. 14181; however, it introduced a new bug. Whenever the radio switch was turned off, it was necessary to unload and reload the driver for it to recognize the switch again. This patch fixes both the original bug in #14181 and the bug introduced by the previous patch. It must be stated, however, that if there is a BCM4306/3 with an rfkill switch (not yet proven), then the driver will need an unload/reload cycle to turn the device back on. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27rt2x00: Fix crypto in TX frame for rt2800usbBenoit PAPILLAULT
Signed-off-by: Benoit PAPILLAULT <benoit.papillault@free.fr> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-27Revert "PCI: get larger bridge ranges when space is available"Jesse Barnes
This reverts commit 308cf8e13f42f476dfd6552aeff58fdc0788e566. This patch had trouble with transparent bridges, among other things. A more readable and correct version should land in 2.6.33. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-26sh_eth: Add asm/cacheflush.hNobuhiro Iwamatsu
Add include asm/cacheflush.h, because declaration of __flush_purge_region moved to asm/cacheflush.h. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-26PPPoE: Fix flush/close races.Michal Ostrowski
Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski <mostrows@gmail.com> Reviewed-by: Cyril Gorcunov <gorcunov@gmail.com> Reported-by: Denys Fedoryschenko <denys@visp.net.lb> Tested-by: Denys Fedoryschenko <denys@visp.net.lb>
2009-10-27mfd: Do not dereference null pointer in twl4030 error pathIlkka Koskinen
We are mistakenly dereferencing twl->client in the twl->client null checking path. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-27mfd: Always initialise WM831x IRQ mutexMark Brown
This avoids crashes when running without interrupt support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-10-26e1000e: allow for swflag to be held over consecutive PHY accessesBruce Allan
PCH-based parts (82577/82578) and some ICH8-based parts (82566) need to hold the swflag (sw/fw/hw hardware semaphore) over consecutive PHY accesses in order to perform sw-driven PHY configuration during initialization to workaround known hardware issues (see follow-on patch). This patch provides new PHY read/write functions (and function pointers) that will allow accessing the PHY registers assuming the swflag has already been acquired. The actual PHY register access code has moved into helper functions that are called with a flag indicating whether or not the swflag has already been acquired and acquires/releases it if not. The functions called from within the updated PHY access functions had to be updated to assume the swflag was already acquired, and other functions that called those functions were also updated to acquire/release the swflag. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-26e1000e: separate mutex usage between NVM and PHY/CSR register for ICHx/PCHBruce Allan
Accesses to NVM and PHY/CSR registers on ICHx/PCH-based parts are protected from concurrent accesses with a mutex that is acquired when the access is initiated and released when the access has completed. However, the two types of accesses should not be protected by the same mutex because the driver may have to access the NVM while already holding the mutex over several consecutive PHY/CSR accesses which would result in livelock. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-26e1000e: 82577/82578 requires a different method to configure LPLUBruce Allan
Unlike previous ICHx-based parts, the PCH-based parts (82577/82578) require LPLU (Low Power Link Up, or "reverse auto-negotiation") to be configured in the PHY rather than the MAC. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-26e1000e: increase swflag acquisition timeout for ICHx/PCHBruce Allan
In some conditions (e.g. when AMT is enabled on the system), it is possible to take an extended period of time to for the driver to acquire the sw/fw/hw hardware semaphore used to protect against concurrent access of a shared resource (e.g. PHY registers). This could cause PHY registers to not get configured properly resulting in link issues. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-26e1000e: clear PHY wakeup bit after LCD reset on 82577/82578Bruce Allan
Performing a dummy read of the PHY Wakeup Control (WUC) register clears the wakeup enable bit set by an PHY reset. If this bit remains set, link problems may occur. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-26igbvf: fix memory leak when ring size changed while interface downAlexander Duyck
This patch resolves a memory leak which occurs while changing the ring size while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-26ixgbe: fix memory leak when resizing rings while interface is downAlexander Duyck
This patch resolves a memory leak that occurs when you resize the rings via the ethtool -G option while the interface is down. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-26igb: fix memory leak when setting ring size while interface is downAlexander Duyck
Changing ring sizes while the interface was down was causing a double allocation of the receive and transmit rings. This issue is amplified when there are multiple rings enabled. To prevent this we need to add an additional check which will just update the ring counts when the interface is not up and skip the allocation steps. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24pcmcia: do not load the pd6729 driver if io_base is NULLKomuro
The CL-PD6729 chip in some docking station is not initialized properly under Linux. In that case, do not load the pd6729 driver. [Dominik Brodowski <linux@dominikbrodowski.net>: spelling fixes, check for NULL not 0] Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-24bonding: Modify hash transmit policies to use the packet's source MAC addressJasper Spaans
Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by: Jasper Spaans <spaans@fox-it.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24DM9000: Fix revision ID for DM9000BBen Dooks
The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt dm9000.h header. Fix bug reported by Paolo Zebelloni. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24r8169: fix Ethernet Hangup for RTL8110SC rev dSimon Wunderlich
The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by: Bernhard Schmidt <bernhard.schmidt@saxnet.de> Signed-off-by: Simon Wunderlich <simon.wunderlich@saxnet.de> Acked-by: Francois Romieu <romieu@zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-24hwmon: (it87) Fix VID reading on IT8718F/IT8720FJean Delvare
Comparing apples to bananas doesn't seem right. Consistently use the chips enum for chip type comparisons, to avoid such bugs in the future. The bug has been there since support for the IT8718F was added, so VID never worked for this chip nor for the similar IT8720F. Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 06:28:46 +0000