aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-12-29ide: always set nIEN on idle devicesBartlomiej Zolnierkiewicz
* Set nIEN for previous port/device in ide_do_request() also if port uses a non-shared IRQ. * Remove no longer needed ide_hwif_t.sharing_irq. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: fix ->quirk_list checking in ide_do_request()Bartlomiej Zolnierkiewicz
Fix nIEN quirk check to also omit quirky devices using pdc202xx_{new,old} host drivers for which ->quirk_list == 2. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29gayle: set IDE_HFLAG_SERIALIZE explictlyBartlomiej Zolnierkiewicz
If IDE doubler is used ports need to be serialized. Currently init_irq() handles it fine but lets also set IDE_HFLAG_SERIALIZE host flag explicitly in preparation for future changes. Also convert the driver to use struct ide_port_info while at it. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29cmd64x: set IDE_HFLAG_SERIALIZE explictly for CMD646Bartlomiej Zolnierkiewicz
* Set IDE_HFLAG_SERIALIZE explictly for CMD646. * Remove no longer needed ide_cmd646 chipset type (which has a nice side-effect of fixing handling of unexpected IRQs). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ali14xx: doesn't use shared IRQsBartlomiej Zolnierkiewicz
init_irq() shouldn't use IRQF_SHARED for ali14xx IDE IRQ handler. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide-cd: remove obsolete seek optimizationBartlomiej Zolnierkiewicz
It doesn't make much sense nowadays and is problematic on some drives. Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: cleanup ide_do_request()Bartlomiej Zolnierkiewicz
Both choose_drive() and PM handling code make sure that the queue is unplugged so no need to check it again. Cc: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: replace the global ide_lock spinlock by per-hwgroup spinlocks (v2)Bartlomiej Zolnierkiewicz
Now that (almost) all host drivers have been fixed not to abuse ide_lock and core code usage of ide_lock has been sanitized we may safely replace ide_lock by per-hwgroup locks. This patch is partially based on earlier patch from Ravikiran G Thirumalai. While at it: - don't use deprecated HWIF() and HWGROUP() macros - update locking documentation in ide.h v2: Add missing spin_lock_init(&hwgroup->lock). (Noticed by Elias Oltmanns) Cc: Vaibhav V. Nivargi <vaibhav.nivargi@gmail.com> Cc: Alok N. Kataria <alokk@calsoftinc.com> Cc: Shai Fultheim <shai@scalex86.org> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Cc: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: use queue lock instead of ide_lock when possibleBartlomiej Zolnierkiewicz
This is just a preparation for future changes and there should be no functional changes caused by this patch since ide_lock is currently also used as queue lock. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: ide_lock + __blk_end_request() -> blk_end_request()Bartlomiej Zolnierkiewicz
Use blk_end_request() instead of ide_lock + __blk_end_request() in cdrom_end_request(), cdrom_newpc_intr(), __ide_end_request(), ide_complete_pm_request() and ide_end_drive_cmd(). [ ide_lock is currently also used as queue lock ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: push ide_lock to __ide_end_request()Bartlomiej Zolnierkiewicz
__ide_end_request() needs ide_lock only for __blk_end_request() call so push ide_lock taking inside __ide_end_requests(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: ide_hwgroup_t.rq doesn't need an ide_lock heldBartlomiej Zolnierkiewicz
While at it: - no need to check for hwgroup presence in ide_dump_opcode() Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: __ide_port_unregister_devices() doesn't need an ide_lock heldBartlomiej Zolnierkiewicz
[ and ide_cfg_mtx mutex provides a sufficient protection for callers ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: IDE settings don't need an ide_lock heldBartlomiej Zolnierkiewicz
IDE settings are protected by ide_setting_mtx mutex so there is no need to hold ide_lock in ide_setting_ioctl(), ide_read_setting() and ide_proc_unregister_driver(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: unify ide_intr()'s exit pointsBartlomiej Zolnierkiewicz
Just a preparation for future changes. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: fix IDE ACPI regression breaking suspendBartlomiej Zolnierkiewicz
Commit 4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab ("ide: make drive->id an union (take 2)") accidentally introduced an IDE ACPI regression which at least on some machines confuses ACPI and breaks suspend. Fix it. Fixes kernel.org bug #12279: http://bugzilla.kernel.org/show_bug.cgi?id=12279 [ Sorry about the bug (IDE ACPI is not used by default so it managed to slip in). Still it is kind of surprising that the bug breaks suspend as it shouldn't impact anything except IDE ACPI (it seems that it uncovered either some ACPI/PM deficiency or a BIOS bug). ] Reported-and-bisected-by: David Roka <roka@dawid.hu> Tested-by: David Roka <roka@dawid.hu> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29tx493[89]ide: Fix length for __ide_flush_dcache_rangeAtsushi Nemoto
This fixes data corruption on PIO mode. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: stable <stable@kernel.org> Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29tx4939ide: Do not use zero count PRD entryAtsushi Nemoto
This fixes data corruption on some heavy load. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: stable <stable@kernel.org> Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-24Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only V4L/DVB (9906): v4l2-compat: test for unlocked_ioctl as well. V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204 V4L/DVB (9875): gspca - main: Fix vidioc_s_jpegcomp locking. V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support) V4L/DVB (9780): dib0700: Stop repeating after user stops pushing button
2008-12-23Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: fix correctness of irq_enabled check for radeon.
2008-12-23edac: fix edac core deadlock when removing a deviceHarry Ciao
When deleting an edac device, we have to wait for its edac_dev.work to be completed before deleting the whole edac_dev structure. Since we have no idea which work in current edac_poller's workqueue is the work we are conerned about, we wait for all work in the edac_poller's workqueue to be proceseed. This is done via flush_cpu_workqueue() which inserts a wq_barrier into the tail of the workqueue and then sleeping on the completion of this wq_barrier. The edac_poller will wake up sleepers when it is found. EDAC core creates only one kernel worker thread, edac_poller, to run the works of all current edac devices. They share the same callback function of edac_device_workq_function(), which would grab the mutex of device_ctls_mutex first before it checks the device. This is exactly where edac_poller and rmmod would have a great chance to deadlock. In below call trace of rmmod > ... > edac_device_del_device > edac_device_workq_teardown > flush_workqueue > flush_cpu_workqueue, device_ctls_mutex would have already been grabbed by edac_device_del_device(). So, on one hand rmmod would sleep on the completion of a wq_barrier, holding device_ctls_mutex; on the other hand edac_poller would be blocked on the same mutex when it's running any one of works of existing edac evices(Note, this edac_dev.work is likely to be totally irrelevant to the one that is being removed right now)and never would have a chance to run the work of above wq_barrier to wake rmmod up. edac_device_workq_teardown() should not be called within the critical region of device_ctls_mutex. Just like is done in edac_pci_del_device() and edac_mc_del_mc(), where edac_pci_workq_teardown() and edac_mc_workq_teardown() are called after related mutex are released. Moreover, an edac_dev.work should check first if it is being removed. If this is the case, then it should bail out immediately. Since not all of existing edac devices are to be removed, this "shutting flag" should be contained to edac device being removed. The current edac_dev.op_state can be used to serve this purpose. The original deadlock problem and the solution have been witnessed and tested on actual hardware. Without the solution, rmmod an edac driver would result in below deadlock: root@localhost:/root> rmmod mv64x60_edac EDAC DEBUG: mv64x60_dma_err_remove() EDAC DEBUG: edac_device_del_device() EDAC DEBUG: find_edac_device_by_dev() (hang for a moment) INFO: task edac-poller:2030 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. edac-poller D 00000000 0 2030 2 Call Trace: [df159dc0] [c0071e3c] free_hot_cold_page+0x17c/0x304 (unreliable) [df159e80] [c000a024] __switch_to+0x6c/0xa0 [df159ea0] [c03587d8] schedule+0x2f4/0x4d8 [df159f00] [c03598a8] __mutex_lock_slowpath+0xa0/0x174 [df159f40] [e1030434] edac_device_workq_function+0x28/0xd8 [edac_core] [df159f60] [c003beb4] run_workqueue+0x114/0x218 [df159f90] [c003c674] worker_thread+0x5c/0xc8 [df159fd0] [c004106c] kthread+0x5c/0xa0 [df159ff0] [c0013538] original_kernel_thread+0x44/0x60 INFO: task rmmod:2062 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. rmmod D 0ff2c9fc 0 2062 1839 Call Trace: [df119c00] [c0437a74] 0xc0437a74 (unreliable) [df119cc0] [c000a024] __switch_to+0x6c/0xa0 [df119ce0] [c03587d8] schedule+0x2f4/0x4d8 [df119d40] [c03591dc] schedule_timeout+0xb0/0xf4 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23w1: fix slave selection on big-endian systemsEvgeniy Polyakov
During test of the w1-gpio driver i found that in "w1.c:679 w1_slave_found()" the device id is converted to little-endian with "cpu_to_le64()", but its not converted back to cpu format in "w1_io.c:293 w1_reset_select_slave()". Based on a patch created by Andreas Hummel. [akpm@linux-foundation.org: remove unneeded cast] Reported-by: Andreas Hummel <andi_hummel@gmx.de> Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23rtc: rtc-isl1208: reject invalid datesChris Elston
This patch for the rtc-isl1208 driver makes it reject invalid dates. Signed-off-by: Chris Elston <celston@katalix.com> [a.zummo@towertech.it: added comment explaining the check] Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Hebert Valerio Riedel <hvr@gnu.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-23V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to ↵Devin Heitmueller
VIDIOC_INT_RESET command Fix a NULL pointer dereference that would occur if the video decoder tied to the em28xx supports the VIDIOC_INT_RESET call (for example: the cx25840 driver) Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-23drm/radeon: fix correctness of irq_enabled check for radeon.Dave Airlie
This check was introduced with the logic the wrong way around. Fixes regression: http://bugzilla.kernel.org/show_bug.cgi?id=12216 Tested-by: François Valenduc <francois.valenduc@tvcablenet.be> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-22Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: don't cond_resched() when irqs_disabled() ACPI: fix 2.6.28 acpi.debug_level regression
2008-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test
2008-12-22drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: ppp: fix segfaults introduced by netdev_priv changes net: Fix module refcount leak in kernel_accept()
2008-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mpt fusion: clear list of outstanding commands on host reset [SCSI] scsi_lib: only call scsi_unprep_request() under queue lock [SCSI] ibmvstgt: move crq_queue_create to the end of initialization [SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools [SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S
2008-12-19Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: fix problem that deleting multiple logical drives could cause a panic
2008-12-19Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: GEM on PAE has problems - disable it for now. drm/i915: Don't return busy for buffers left on the flushing list.
2008-12-19Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: Don't read past end of bitmap when reading bitmap.
2008-12-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: ibmphp: Fix module ref count underflow PCI hotplug: acpiphp wants a 64-bit _SUN PCI: pciehp: fix unexpected power off with pciehp_force PCI: fix aer resume sanity check
2008-12-19ACPI: fix 2.6.28 acpi.debug_level regressionBjorn Helgaas
acpi_early_init() was changed to over-write the cmdline param, making it really inconvenient to set debug flags at boot-time. Also, This sets the default level to "info", which is what all the ACPI drivers use. So to enable messages from drivers, you only have to supply the "layer" (a.k.a. "component"). For non-"info" ACPI core and ACPI interpreter messages, you have to supply both level and layer masks, as before. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-19cciss: fix problem that deleting multiple logical drives could cause a panicStephen M. Cameron
Fix problem that deleting multiple logical drives could cause a panic. It fixes a panic which can be easily reproduced in the following way: Just create several "arrays," each with multiple logical drives via hpacucli, then delete the first array, and it will blow up in deregister_disk(), in the call to get_host() when it tries to dig the hba pointer out of a NULL queue pointer. The problem has been present since my code to make rebuild_lun_table behave better went in. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-19drm/i915: GEM on PAE has problems - disable it for now.Dave Airlie
On PAE systems, GEM allocates pages using shmem, and passes these pages to be bound into AGP, however the AGP interfaces + the x86 set_memory interfaces all take unsigned long not dma_addr_t. The initial fix for this was a mess, so we need to do this correctly for 2.6.29. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-19drm/i915: Don't return busy for buffers left on the flushing list.Eric Anholt
These buffers don't have active rendering still occurring to them, they just need either a flush to be emitted or a retire_requests to occur so that we notice they're done. Return unbusy so that one of the two occurs. The two expected consumers of this interface (OpenGL and libdrm_intel BO cache) both want this behavior. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-19md: Don't read past end of bitmap when reading bitmap.NeilBrown
When we read the write-intent-bitmap off the device, we currently read a whole number of pages. When PAGE_SIZE is 4K, this works due to the alignment we enforce on the superblock and bitmap. When PAGE_SIZE is 64K, this case read past the end-of-device which causes an error. When we write the superblock, we ensure to clip the last page to just be the required size. Copy that code into the read path to just read the required number of sectors. Signed-off-by: Neil Brown <neilb@suse.de> Cc: stable@kernel.org
2008-12-18ppp: fix segfaults introduced by netdev_priv changesJames Chapman
This patch fixes a segfault in ppp_shutdown_interface() and ppp_destroy_interface() when a PPP connection is closed. I bisected the problem to the following commit: commit c8019bf3aff653cceb64f66489fc299ee5957b57 Author: Wang Chen <wangchen@cn.fujitsu.com> Date: Thu Nov 20 04:24:17 2008 -0800 netdevice ppp: Convert directly reference of netdev->priv 1. Use netdev_priv(dev) to replace dev->priv. 2. Alloc netdev's private data by alloc_netdev(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> The original ppp_generic code treated the netdev and struct ppp as independent data structures which were freed separately. In moving the ppp struct into the netdev, it is now possible for the private data to be freed before the call to ppp_shutdown_interface(), which is bad. The kfree(ppp) in ppp_destroy_interface() is also wrong; presumably ppp hasn't worked since the above commit. The following patch fixes both problems. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-18Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: async_xor: dma_map destination DMA_BIDIRECTIONAL dmaengine: protect 'id' from concurrent registrations ioat: wait for self-test completion
2008-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: bnx2: Fix bug in bnx2_free_rx_mem(). irda: Add irda_skb_cb qdisc related padding jme: Fixed a typo net: kernel BUG at drivers/net/phy/mdio_bus.c:165! drivers/net: starfire: Fix napi ->poll() weight handling tlan: Fix pci memory unmapping enc28j60: use netif_rx_ni() to deliver RX packets tlan: Fix small (< 64 bytes) datagram transmissions netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC
2008-12-17bnx2: Fix bug in bnx2_free_rx_mem().Michael Chan
DMA memory for the jumbo rx page rings was freed incorrectly using the wrong local variable as the array index. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17PCI hotplug: ibmphp: Fix module ref count underflowNeil Horman
I happened to notice that the ibmphp hotplug driver does something rather silly in its init routine. It purposely calls module_put so as to underflow its module ref count to avoid being removed from the kernel. This is bad practice, and wrong, since it provides a window for subsequent module_gets to reset the refcount to zero, allowing an unload to race in and cause all sorts of mysterious panics. If the module is unsafe to load, simply omitting the module_exit parameter is sufficient to prevent the kernel from allowing the unload. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-12-17Merge branch 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-s3c2410: fix check for being in suspend. i2c-cpm: Detect and report NAK right away instead of timing out
2008-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display USB: set correct configuration in probe of ti_usb_3410_5052 USB: add 5372:2303 to pl2303 USB: skip Set-Interface(0) if already in altsetting 0 USB: fix comment about endianness of descriptors USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour usbmon: drop bogus 0t from usbmon.txt USB: gadget: fix rndis working at high speed USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID USB: tty: SprogII DCC controller identifiers usb-storage: update unusual_devs entry for Nokia 5310 USB: Unusual devs patch for Nokia 3500c USB: storage: unusual_devs.h: Nokia 3109c addition USB: fix problem with usbtmc driver not loading properly
2008-12-17STAGING: Move staging drivers back to staging-specific menuDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17xilinx_hwicap: remove improper wording in license statementGreg Kroah-Hartman
GPLv2 doesn't allow additional restrictions to be imposed on any code, so this wording needs to be removed from these files. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole displayMike Provencher
Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher <mike.provencher@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17USB: set correct configuration in probe of ti_usb_3410_5052Oliver Neukum
This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 16:20:24 +0000