aboutsummaryrefslogtreecommitdiff
path: root/fs/btrfs/tree-log.c
AgeCommit message (Collapse)Author
2009-04-24Btrfs: fix fallocate deadlock on inode extent lockChris Mason
The btrfs fallocate call takes an extent lock on the entire range being fallocated, and then runs through insert_reserved_extent on each extent as they are allocated. The problem with this is that btrfs_drop_extents may decide to try and take the same extent lock fallocate was already holding. The solution used here is to push down knowledge of the range that is already locked going into btrfs_drop_extents. It turns out that at least one other caller had the same bug. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: BUG to BUG_ON changesStoyan Gaydarov
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02Btrfs: notreelog mount optionSage Weil
Add a 'notreelog' mount option to disable the tree log (used by fsync, O_SYNC writes). This is much slower, but the tree logging produces inconsistent views into the FS for ceph. Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-03Btrfs: kill the pinned_mutexJosef Bacik
This patch removes the pinned_mutex. The extent io map has an internal tree lock that protects the tree itself, and since we only copy the extent io map when we are committing the transaction we don't need it there. We also don't need it when caching the block group since searching through the tree is also protected by the internal map spin lock. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2009-03-24Btrfs: optimize fsyncs on old filesChris Mason
The fsync log has code to make sure all of the parents of a file are in the log along with the file. It uses a minimal log of the parent directory inodes, just enough to get the parent directory on disk. If the transaction that originally created a file is fully on disk, and the file hasn't been renamed or linked into other directories, we can safely skip the parent directory walk. We know the file is on disk somewhere and we can go ahead and just log that single file. This is more important now because unrelated unlinks in the parent directory might make us force a commit if we try to log the parent. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: tree logging unlink/rename fixesChris Mason
The tree logging code allows individual files or directories to be logged without including operations on other files and directories in the FS. It tries to commit the minimal set of changes to disk in order to fsync the single file or directory that was sent to fsync or O_SYNC. The tree logging code was allowing files and directories to be unlinked if they were part of a rename operation where only one directory in the rename was in the fsync log. This patch adds a few new rules to the tree logging. 1) on rename or unlink, if the inode being unlinked isn't in the fsync log, we must force a full commit before doing an fsync of the directory where the unlink was done. The commit isn't done during the unlink, but it is forced the next time we try to log the parent directory. Solution: record transid of last unlink/rename per directory when the directory wasn't already logged. For renames this is only done when renaming to a different directory. mkdir foo/some_dir normal commit rename foo/some_dir foo2/some_dir mkdir foo/some_dir fsync foo/some_dir/some_file The fsync above will unlink the original some_dir without recording it in its new location (foo2). After a crash, some_dir will be gone unless the fsync of some_file forces a full commit 2) we must log any new names for any file or dir that is in the fsync log. This way we make sure not to lose files that are unlinked during the same transaction. 2a) we must log any new names for any file or dir during rename when the directory they are being removed from was logged. 2a is actually the more important variant. Without the extra logging a crash might unlink the old name without recreating the new one 3) after a crash, we must go through any directories with a link count of zero and redo the rm -rf mkdir f1/foo normal commit rm -rf f1/foo fsync(f1) The directory f1 was fully removed from the FS, but fsync was never called on f1, only its parent dir. After a crash the rm -rf must be replayed. This must be able to recurse down the entire directory tree. The inode link count fixup code takes care of the ugly details. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: Make sure i_nlink doesn't hit zero too soon during log replayChris Mason
During log replay, inodes are copied from the log to the main filesystem btrees. Sometimes they have a zero link count in the log but they actually gain links during the replay or have some in the main btree. This patch updates the link count to be at least one after copying the inode out of the log. This makes sure the inode is deleted during an iput while the rest of the replay code is still working on it. The log replay has fixup code to make sure that link counts are correct at the end of the replay, so we could use any non-zero number here and it would work fine. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-03-24Btrfs: leave btree locks spinning more oftenChris Mason
btrfs_mark_buffer dirty would set dirty bits in the extent_io tree for the buffers it was dirtying. This may require a kmalloc and it was not atomic. So, anyone who called btrfs_mark_buffer_dirty had to set any btree locks they were holding to blocking first. This commit changes dirty tracking for extent buffers to just use a flag in the extent buffer. Now that we have one and only one extent buffer per page, this can be safely done without losing dirty bits along the way. This also introduces a path->leave_spinning flag that callers of btrfs_search_slot can use to indicate they will properly deal with a path returned where all the locks are spinning instead of blocking. Many of the btree search callers now expect spinning paths, resulting in better btree concurrency overall. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12Btrfs: hold trans_mutex when using btrfs_record_root_in_transYan Zheng
btrfs_record_root_in_trans needs the trans_mutex held to make sure two callers don't race to setup the root in a given transaction. This adds it to all the places that were missing it. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-02-04Btrfs: Change btree locking to use explicit blocking pointsChris Mason
Most of the btrfs metadata operations can be protected by a spinlock, but some operations still need to schedule. So far, btrfs has been using a mutex along with a trylock loop, most of the time it is able to avoid going for the full mutex, so the trylock loop is a big performance gain. This commit is step one for getting rid of the blocking locks entirely. btrfs_tree_lock takes a spinlock, and the code explicitly switches to a blocking lock when it starts an operation that can schedule. We'll be able get rid of the blocking locks in smaller pieces over time. Tracing allows us to find the most common cause of blocking, so we can start with the hot spots first. The basic idea is: btrfs_tree_lock() returns with the spin lock held btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in the extent buffer flags, and then drops the spin lock. The buffer is still considered locked by all of the btrfs code. If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops the spin lock and waits on a wait queue for the blocking bit to go away. Much of the code that needs to set the blocking bit finishes without actually blocking a good percentage of the time. So, an adaptive spin is still used against the blocking bit to avoid very high context switch rates. btrfs_clear_lock_blocking() clears the blocking bit and returns with the spinlock held again. btrfs_tree_unlock() can be called on either blocking or spinning locks, it does the right thing based on the blocking bit. ctree.c has a helper function to set/clear all the locked buffers in a path as blocking. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-21Btrfs: fix tree logs parallel syncYan Zheng
To improve performance, btrfs_sync_log merges tree log sync requests. But it wrongly merges sync requests for different tree logs. If multiple tree logs are synced at the same time, only one of them actually gets synced. This patch has following changes to fix the bug: Move most tree log related fields in btrfs_fs_info to btrfs_root. This allows merging sync requests separately for each tree log. Don't insert root item into the log root tree immediately after log tree is allocated. Root item for log tree is inserted when log tree get synced for the first time. This allows syncing the log root tree without first syncing all log trees. At tree-log sync, btrfs_sync_log first sync the log tree; then updates corresponding root item in the log root tree; sync the log root tree; then update the super block. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-01-09Btrfs: explicitly mark the tree log root for writebackChris Mason
Each subvolume has an extent_state_tree used to mark metadata that needs to be sent to disk while syncing the tree. This is used in addition to the dirty bits on the pages themselves so that a single subvolume can be sent to disk efficiently in disk order. Normally this marking happens in btrfs_alloc_free_block, which also does special recording of dirty tree blocks for the tree log roots. Yan Zheng noticed that when the root of the log tree is allocated, it is added to the wrong writeback list. The fix used here is to explicitly set it dirty as part of tree log creation. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-06Btrfs: tree logging checksum fixesYan Zheng
This patch contains following things. 1) Limit the max size of btrfs_ordered_sum structure to PAGE_SIZE. This struct is kmalloced so we want to keep it reasonable. 2) Replace copy_extent_csums by btrfs_lookup_csums_range. This was duplicated code in tree-log.c 3) Remove replay_one_csum. csum items are replayed at the same time as replaying file extents. This guarantees we only replay useful csums. 4) nbytes accounting fix. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2009-01-05Btrfs: Fix checkpatch.pl warningsChris Mason
There were many, most are fixed now. struct-funcs.c generates some warnings but these are bogus. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-05Btrfs: avoid orphan inode caused by log replayYan Zheng
drop_one_dir_item does not properly update inode's link count. It can be reproduced by executing following commands: #touch test #sync #rm -f test #dd if=/dev/zero bs=4k count=1 of=test conv=fsync #echo b > /proc/sysrq-trigger This fixes it by adding an BTRFS_ORPHAN_ITEM_KEY for the inode Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-17Btrfs: properly check free space for tree balancingYan Zheng
btrfs_insert_empty_items takes the space needed by the btrfs_item structure into account when calculating the required free space. So the tree balancing code shouldn't add sizeof(struct btrfs_item) to the size when checking the free space. This patch removes these superfluous additions. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-08Btrfs: Fix compressed checksum fsync log copiesChris Mason
The fsync logging code makes sure to onl copy the relevant checksum for each extent based on the file extent pointers it finds. But for compressed extents, it needs to copy the checksum for the entire extent. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-08Btrfs: superblock duplicationYan Zheng
This patch implements superblock duplication. Superblocks are stored at offset 16K, 64M and 256G on every devices. Spaces used by superblocks are preserved by the allocator, which uses a reverse mapping function to find the logical addresses that correspond to superblocks. Thank you, Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-08Btrfs: move data checksumming into a dedicated treeChris Mason
Btrfs stores checksums for each data block. Until now, they have been stored in the subvolume trees, indexed by the inode that is referencing the data block. This means that when we read the inode, we've probably read in at least some checksums as well. But, this has a few problems: * The checksums are indexed by logical offset in the file. When compression is on, this means we have to do the expensive checksumming on the uncompressed data. It would be faster if we could checksum the compressed data instead. * If we implement encryption, we'll be checksumming the plain text and storing that on disk. This is significantly less secure. * For either compression or encryption, we have to get the plain text back before we can verify the checksum as correct. This makes the raid layer balancing and extent moving much more expensive. * It makes the front end caching code more complex, as we have touch the subvolume and inodes as we cache extents. * There is potentitally one copy of the checksum in each subvolume referencing an extent. The solution used here is to store the extent checksums in a dedicated tree. This allows us to index the checksums by phyiscal extent start and length. It means: * The checksum is against the data stored on disk, after any compression or encryption is done. * The checksum is stored in a central location, and can be verified without following back references, or reading inodes. This makes compression significantly faster by reducing the amount of data that needs to be checksummed. It will also allow much faster raid management code in general. The checksums are indexed by a key with a fixed objectid (a magic value in ctree.h) and offset set to the starting byte of the extent. This allows us to copy the checksum items into the fsync log tree directly (or any other tree), without having to invent a second format for them. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-12-02Btrfs: add support for multiple csum algorithmsJosef Bacik
This patch gives us the space we will need in order to have different csum algorithims at some point in the future. We save the csum algorithim type in the superblock, and use those instead of define's. Signed-off-by: Josef Bacik <jbacik@redhat.com>
2008-12-02Btrfs: make things static and include the right headersChristoph Hellwig
Shut up various sparse warnings about symbols that should be either static or have their declarations in scope. Signed-off-by: Christoph Hellwig <hch@lst.de>
2008-10-30Btrfs: Add fallocate support v2Yan Zheng
This patch updates btrfs-progs for fallocate support. fallocate is a little different in Btrfs because we need to tell the COW system that a given preallocated extent doesn't need to be cow'd as long as there are no snapshots of it. This leverages the -o nodatacow checks. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-10-29Btrfs: Add root tree pointer transaction idsYan Zheng
This patch adds transaction IDs to root tree pointers. Transaction IDs in tree pointers are compared with the generation numbers in block headers when reading root blocks of trees. This can detect some types of IO errors. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-10-29Btrfs: nuke fs wide allocation mutex V2Josef Bacik
This patch removes the giant fs_info->alloc_mutex and replaces it with a bunch of little locks. There is now a pinned_mutex, which is used when messing with the pinned_extents extent io tree, and the extent_ins_mutex which is used with the pending_del and extent_ins extent io trees. The locking for the extent tree stuff was inspired by a patch that Yan Zheng wrote to fix a race condition, I cleaned it up some and changed the locking around a little bit, but the idea remains the same. Basically instead of holding the extent_ins_mutex throughout the processing of an extent on the extent_ins or pending_del trees, we just hold it while we're searching and when we clear the bits on those trees, and lock the extent for the duration of the operations on the extent. Also to keep from getting hung up waiting to lock an extent, I've added a try_lock_extent so if we cannot lock the extent, move on to the next one in the tree and we'll come back to that one. I have tested this heavily and it does not appear to break anything. This has to be applied on top of my find_free_extent redo patch. I tested this patch on top of Yan's space reblancing code and it worked fine. The only thing that has changed since the last version is I pulled out all my debugging stuff, apparently I forgot to run guilt refresh before I sent the last patch out. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com>
2008-10-29Btrfs: Add zlib compression supportChris Mason
This is a large change for adding compression on reading and writing, both for inline and regular extents. It does some fairly large surgery to the writeback paths. Compression is off by default and enabled by mount -o compress. Even when the -o compress mount option is not used, it is possible to read compressed extents off the disk. If compression for a given set of pages fails to make them smaller, the file is flagged to avoid future compression attempts later. * While finding delalloc extents, the pages are locked before being sent down to the delalloc handler. This allows the delalloc handler to do complex things such as cleaning the pages, marking them writeback and starting IO on their behalf. * Inline extents are inserted at delalloc time now. This allows us to compress the data before inserting the inline extent, and it allows us to insert an inline extent that spans multiple pages. * All of the in-memory extent representations (extent_map.c, ordered-data.c etc) are changed to record both an in-memory size and an on disk size, as well as a flag for compression. From a disk format point of view, the extent pointers in the file are changed to record the on disk size of a given extent and some encoding flags. Space in the disk format is allocated for compression encoding, as well as encryption and a generic 'other' field. Neither the encryption or the 'other' field are currently used. In order to limit the amount of data read for a single random read in the file, the size of a compressed extent is limited to 128k. This is a software only limit, the disk format supports u64 sized compressed extents. In order to limit the ram consumed while processing extents, the uncompressed size of a compressed extent is limited to 256k. This is a software only limit and will be subject to tuning later. Checksumming is still done on compressed extents, and it is done on the uncompressed version of the data. This way additional encodings can be layered on without having to figure out which encoding to checksum. Compression happens at delalloc time, which is basically singled threaded because it is usually done by a single pdflush thread. This makes it tricky to spread the compression load across all the cpus on the box. We'll have to look at parallel pdflush walks of dirty inodes at a later time. Decompression is hooked into readpages and it does spread across CPUs nicely. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-10-09Btrfs: Remove offset field from struct btrfs_extent_refYan Zheng
The offset field in struct btrfs_extent_ref records the position inside file that file extent is referenced by. In the new back reference system, tree leaves holding references to file extent are recorded explicitly. We can scan these tree leaves very quickly, so the offset field is not required. This patch also makes the back reference system check the objectid when extents are in deleting. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-10-09Btrfs: Count space allocated to file in bytesYan Zheng
This patch makes btrfs count space allocated to file in bytes instead of 512 byte sectors. Everything else in btrfs uses a byte count instead of sector sizes or blocks sizes, so this fits better. Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-09-25Btrfs: Full back reference supportZheng Yan
This patch makes the back reference system to explicit record the location of parent node for all types of extents. The location of parent node is placed into the offset field of backref key. Every time a tree block is balanced, the back references for the affected lower level extents are updated. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Disable the dir fsync optimization to skip logging the dir sometimesChris Mason
More testing has turned up a bug, disable this for now. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Record dirty pages tree-log pages in an extent_io treeChris Mason
This is the same way the transaction code makes sure that all the other tree blocks are safely on disk. There's an extent_io tree for each root, and any blocks allocated to the tree logs are recorded in that tree. At tree-log sync, the extent_io tree is walked to flush down the dirty pages and wait for them. The main benefit is less time spent walking the tree log and skipping clean pages, and getting sequential IO down to the drive. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Copy into the log tree in big batchesChris Mason
This changes the log tree copy code to use btrfs_insert_items and to work in larger batches where possible. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Optimize tree log block allocationsChris Mason
Since tree log blocks get freed every transaction, they never really need to be written to disk. This skips the step where we update metadata to record they were allocated. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Optimize btree walking while logging inodesChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Dir fsync optimizationsChris Mason
Drop i_mutex during the commit Don't bother doing the fsync at all unless the dir is marked as dirtied and needing fsync in this transaction. For directories, this means that someone has unlinked a file from the dir without fsyncing the file. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Update the highest objectid in a root after log replay is doneChris Mason
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Tree logging fixesChris Mason
* Pin down data blocks to prevent them from being reallocated like so: trans 1: allocate file extent trans 2: free file extent trans 3: free file extent during old snapshot deletion trans 3: allocate file extent to new file trans 3: fsync new file Before the tree logging code, this was legal because the fsync would commit the transation that did the final data extent free and the transaction that allocated the extent to the new file at the same time. With the tree logging code, the tree log subtransaction can commit before the transaction that freed the extent. If we crash, we're left with two different files using the extent. * Don't wait in start_transaction if log replay is going on. This avoids deadlocks from iput while we're cleaning up link counts in the replay code. * Don't deadlock in replay_one_name by trying to read an inode off the disk while holding paths for the directory * Hold the buffer lock while we mark a buffer as written. This closes a race where someone is changing a buffer while we write it. They are supposed to mark it dirty again after they change it, but this violates the cow rules. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Add a write ahead tree log to optimize synchronous operationsChris Mason
File syncs and directory syncs are optimized by copying their items into a special (copy-on-write) log tree. There is one log tree per subvolume and the btrfs super block points to a tree of log tree roots. After a crash, items are copied out of the log tree and back into the subvolume. See tree-log.c for all the details. Signed-off-by: Chris Mason <chris.mason@oracle.com>